Can PS CS6 cause font problems in In-Design CS4?

When I was running just Adobe Creative Suite 4 I didn't have any problems with the In-Design program. After loading Photoshop CS6 and Illustrator CS6, when trying to print in In-Design CS4, I just get the spinning beach ball!
I suspect a font problem induced by CS6, but could be off base on this one. I'm running a 2010 Mac Pro. If it's a font problem, whats the best way to attack! Any suggestion will be helpful. Thanks
Jim

Do you have any 3rd party fonts installed?

Similar Messages

Yosemite causes font problem in Chrome

Does ANYBODY know how to get fonts to display correctly in Chrome since the update to Yosemite? I so regret doing the update because all my Helvetica displays as an A inside a square. I have searched in all friggin forums about this and nobody has a solution that works. Please holler if you are a superstar and have a solution.
<3
Angela

Would you work around this by keeping on doing the sudo every time you restart the computer
No, as you're then just patching a recurring issue every day. Something is causing the problem.
When clearing the caches initially works and then comes back, it's probably either corrupt fonts, or third party fonts you've installed that conflict with some of the newly installed system fonts.
Since you just recently installed Yosemite, it's a pretty good bet the OS X supplied fonts are not the issue. That leaves third party fonts you've installed. Create a new folder on the desktop. With Finder showing as the active app at the upper left next to the Apple logo, hold the Option key and choose Go > Library from the menu bar. This open the Library folder in your user account. Open the Fonts folder. If there are any fonts in that folder, move all of them to the new folder you created on the desktop.
Next, launch Font Book. With FB in the foreground, choose the option on the menu bar to Restore Standard Fonts. This will move any third party fonts in the root /Library/Fonts/ folder to a new folder right next to it named Fonts (Removed). The only ones remaining will be those installed by OS X. It will also perform this move to the /System/Library/Fonts/ folder. All that will be left as active fonts in the three main Library folders after that (system, root library, user account) will be those installed by Yosemite.
Font Book is not a happy camper when fonts are manually removed. It will almost always corrupt its database. So the last steps are to clear Font Book's database, and once again, clear all font cache files from the system.
1. Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point. Yosemite is a bit different. Whether it's a Safe Mode boot or a normal one, you get the same progress bar. It just takes longer to get to the desktop in Safe Mode. So hold the Shift key until you get to the desktop.
OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
2. Since the system font cache files are not cleared by a Safe Mode startup, repeat the steps you performed above:
Close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
This removes all font cache files. Both for the system and the current logged in user account. After running the command, close Terminal and immediately restart your Mac.
That should stop any issues with fonts being displayed incorrectly in all apps. After that, you need to determine which of the third party fonts you have are causing the problem. Use either the Fonts folder in your user account, or create a new folder in the root /Library/Fonts/ folder. You could just name it "test". Drop about 10 fonts into your new folder, or the initially empty user account Fonts folder, at a time. Use the system for a while and see if the problem returns. Keep adding fonts a handful at a time. When the problem reappears, you'll know at least one of the fonts you just reactivated is bad. Pull those back out and once again follow the two steps above. Keep whittling down your third party fonts by means of elimination until you've clearly identified the culprit(s) and delete those fonts.

Can MDAC installation cause navigation problems within the portal?

Hello,
I have a client who having problems loading page links in our second level navigation. Evertime time she clicks on node to expand the tree of links, she gets a "loading" message. I see this all the time but this message doesn't go away. She also gets a javascript error on the page stating it cannot find the specify module. She notice the problem around the time of her MDAC file installation. Do anyone know if this can cause a problem for navigation on the portal?
Thank you,
Francis

You made this bed by over complicating your site. Simple solution, take your pages out of sub-folders. Nobody but you cares about the .html extensions. IMO, it's a very poor reason for using sub-folders.
About linking & navigation:
http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7c44a.h tml
Presently, you must be using document relative link paths. Either switch to Site Root Relative links which will likely work on your remote server but fail to test locally. Or use absolute URLs (http://). The downside with this is that DW won't be able to manage links for you.
Nancy O.

T61 nvidia driver causes font problems

after my last update a new graphics driver for the nvidia quadro 140m was installed.
the new version (7618) caused bad problems with my fonts. (they could not been displayed)
-> only squares for each letter
it took me a have day to find out, that it was the graphic driver (i didn't expected that).
After I reinstalled my fontexplorer and repared my windows installation several times,
it took me another half day to find the download to the old driver again. (7471)
ftp://ftp.software.ibm.com/pc/pccbbs/mobiles/7kd165ww.exe
now it works again with the old driver and i hope there will be an update and at least a notice in the thinkpad system update.
frustrated greets.

Hi Puschl636,
I had a similar problem. I have 3.03a of the presentation director and the most current display driver.
If I boot with dual screens, the first time I do it, I have to open the lid to the laptop and then close it after startup and it will usually move to the dual screen profile.
It may be a temp fix, but after that, as long as I have it docked, the dual screens come up.
Hope that helps!
Roy

Export ePUB from inDesign CS6 - polish fonts problem

I have to make ePUB with polish fonts.
I create a simple one page document in inDesign CS6 and export it to ePUB. All fonts are embedded.
When I check it in Adobe Digital Editions (ADE) there is problem with polish fonts (ż, ł). ADE doesn't read it correctly. Other readers do it in right way.
Is it a problem with inDesign or ADE?

The ADE provides a preview, and nothing more than that. Actual viewers have other, more, or less capabilities -- some don't support embedded fonts, others do but with limitations, etc.
ComrelPL wrote:
.. that's why bookstores need ePUB to be compatibile with this ADE.
E-Pub is still in its infancy. There is no general "e-pub" standard that *all* viewers are compatible with, other than the very lowest common denominator (which may very well mean "plain text").

Can simulatneous insert cause some problem in Oracle databse

Two queries update A DB simultaneously.
1st query adds 1000 rows to table A.
2nd query adds 50 rows to table B.
what can be the problem with such an update?
how can this be rectified?

Some confusion regarding your statements:
Two queries update A DB simultaneously.Here you are indicating UPDATE operation on the database.
1st query adds 1000 rows to table A.
2nd query adds 50 rows to table B.Here you are indicating INSERT operation on the database.
Unless there is a dependancy between table A and B (referentials, triggers), I donot see any problem with a scenario.
If there is a dependency between table A and B (like A being parent of B or vice versa), depending on the time of record insertion, either of the transactions may fail with parent keys not found error.
Can you post more details about the problem that you are facing?

Problem installing Standard Design CS4

The other day when I was installing Photoshop from the suite, I noticed from the list that one of the applications that came with the suite was Acrobat Pro. Today I want back to try to install Acrobat Pro, however Acrobat Pro was not listed as an application that I could install. Why is it not listed now? Why do I not have the option to install it?
Alan

My bad. You're right!
That comes from trying to answer a question when you're not fully awake. What I said was true in the early days of the Suite, forgot that they changed that. Sorry.

Font problem when downsizing file in Adobe Acrobat pro 9

We currently use Quark on our pcs and sometimes when we need to downsize the hi res print ready
pdf to low res. We do this in acrobat but what tends to happen is that the fonts either shift or
go across the page. Can anyone help with this? there are two of us running 9 while the rest of the crew are operating 4,
although I do not think that this is the problem. Can external ads cause a problem?
thanks
Nita

External ads?
Open the original external ads and check for font embedding. If the fonts are not embedded (or subset), than Acrobat has no font data for the spacing and such.
I have to ask however...when you create a "hi res print ready" pdf from Quark...with a placed pdf without fonts embedded (or subset) does Quark not realize or warn you that the fonts are not available?!?

Font problem when converting to pdf

I have been struggling with this for a long time! When I export to pdf for some reason the fonts become really mangled. I use several fonts but it is especially baskerville 12 that looks really bad. I have searched and searched but can't figure out why it comes out like that?
If anyone can be of help it will be much appreciated!

I have the same issue. From what I found online it originated sometime during this update (http://indesignsecrets.com/mac-os-x-10-6-7-update-causes-font-problems—but-proba bly-not-in-indesign.php)? I am running OSX Lion but it seems the issue was inherited...
My situation is using Pages with Baskerville font. It appears wonky in Adobe Reader but as expected in Preview.
Found a temporary fix at http://forums.adobe.com/message/4320355#4319047 . It would be nice for this to be included in an upcoming patch.
Message was edited by: _juan_

Glitches in address fill-ins with nicknames; default font problem; plus other glitches in Thunderbird 31.3.0 and 31.4.0; can I roll back to an earlier version?

I am unhappy with the recent upgrade to Thunderbird 31.3.0 and now 31.4.0. My bottom line question is whether I can roll back to the previous version, which was working well for me.
The problems I have encountered include:
1. I used to be able to enter a single letter in many cases in the address field, and the autocomplete would fill in the entry that I always use with that single letter. That function has been lost, as has auto fill-in based on the nicknames I have entered in my Address Book. I see there is another thread on this problem (https://support.mozilla.org/en-US/questions/1036962), but no satisfactory answer so far. Entering a single letter now pulls up completely unrelated address entries that may not even have that letter as part of the name, address or nickname for that unrelated address. I have created new nicknames to try to adapt to this problem, but even these new nicknames no longer work with the 31.4.0 upgrade yesterday, forcing me to create yet more complex and hard-to-remember nicknames to pull up my frequent addressees. This is all very frustrating to me, as I depend on speed and ease when creating messages.
2. Also, I used to be able to enter a single letter in the address field and then use the mouse to click on the "To:" symbol to the left of the next address line to change the next entry to "Cc:"; doing so would then cause the complete address to fill in in the "To:" address field, and make the next field ready for an entry. That no longer works. If I use that technique, the shortcut that I entered in the first field gets included along with the address (if I'm lucky enough to have the address itself selected now, given the problems I've mentioned above). I now have to press "Enter" in order to get the address in the first field to "take" correctly, and then have to click on the "To:" symbol for the next line as a separate action. Just another inconvenience with the new version.
3. While still on the subject of addresses, personally I see no reason why the address and subject fields should now be colored blue by default rather than appearing as blank, white fields. I far prefer the old look. And I suspect that changing from the blue color to a nice, clean, white field takes time and computer resources that slow things down.
4. The default font (Times in my case) no longer "takes" when replying to or forwarding messages. I've checked Tools/Options/Composition, and Times is still shown as my default font. However, when I start to type (in a reply with the original message quoted or in a forwarded message), the result is "Variable Width". In order to get Times, I need to highlight the block of text after typing, including the lead-in to the quoted message or the header of the forwarded message, and select "Times" when "(mixed)" shows up. This is a big pain; I often forget to do so and end up having to edit the Unsent Message (which I check before sending) as New and correct the font.
5. A minor problem: I rely on the reminder to attach a message which shows up when an "attachment-related" word is entered in the body of the message. It has been a wonderful feature of Thunderbird that has prevented me on many occasions from sending off messages without the attachments. However, in the new versions, even if I have indeed added the attachment, a pop-up comes up on sending the message saying there has been no attachment and asking if I want to add one. It's easy enough to just click "No", but it's yet one more unnecessary and distracting step that this new version is requiring of the user.
I'm really sad to see these various changes/glitches. I love Thunderbird and it bothers me deeply to find myself mired in so many new problems that slow down my work. I would be grateful for any suggestions and advice, and, particularly, for any information as whether I can roll back to the version prior to 31.3.0 that was working well for me.

Thank you, Zenos. I tried rolling back to v31.2.0, since I had not encountered problems prior to December. However, that didn't help. So I followed your valuable suggestion to revert to v24.6; that seems to have done the trick.
I would like to mark this problem as "Solved" -- the rollback seems to have worked. However, since my original post was a complex mix of things, before I do that, should I post the individual problem sets that I had noted (address fields/nicknames problems -- numbers 1-3; default font problem -- number 4; attachment reminder problem -- number 5) as separate issues which have not been solved?
Do you know if these various issues are being worked on? I'm glad to have the temporary fix of rolling back to an earlier version, but I'd like to get back on the current update schedule at some point if and when these problems have been corrected.
Thank you again!

Don't know if this went through the first time. Cannon printer would not print black. bought a new Epson-800. Same problem. Can it be something in my Mac causing the problem. It's only the black that is not working.

Don't know if this went through the first time. Cannon printer would not print black. bought a new Epson-800. Same problem. Can it be something in my Mac causing the problem. It's only the black that is not working.

Bill ...
Believe it or not, might be a font issue > Computer won't print black text in...: Apple Support Communities

I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?

I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?

BUMP
Yes, I just get that message. I don't see how I could investigate this problem.
I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
Can anybody help me?

TS1627 I Can no longer synch my iPhone and iPad to Outlook using iTunes on a Win 7 Pc. I updated to iTunes 11.1.4.62 a few days ago. Don't know if that caused my problem. I've reset the Synch History, deleted any Notes in Outlook that don't have a subje

I Can no longer synch my iPhone and iPad to Outlook using iTunes on a Win 7 Pc. I updated to iTunes 11.1.4.62 a few days ago. Don't know if that caused my problem. I've reset the Synch History, deleted any Notes in Outlook that don't have a subject. Grateful for any help.

You might have better luck in the iTunes for Windows community. I'll ask the hosts to relocate your post.
iTunes for Windows

Does anybody know if Windows 8 is causing a problem with iTunes? Many songs on my old iPod are now missing in my iTunes library and I can't find them anywhere. Also, I have a new iPod and am afraid of using it for fear of something else going wrong.

Does anybody know if Windows 8 is causing a problem with iTunes? Many songs on my old iPod are now missing in my iTunes library and I can't find them anywhere. . Also, I have a new iPod and am afraid of using it for fear of something else going wrong.

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

InDesign CS6 crashing when exporting as a PDF (not font problem)

I have attempted exporting my PDF with all different kinds of settings. It's only an 8 page document. It has about 15 low res jpgs in it. I used a stock Adobe font.There are a several hyperlinks in the file but, mostly it is just text. I have no idea how to fix this. And naturally, I need it for work tomorrow. I do get one error message saying that there is overlaying text on 3 of 8 pages, but I really don't think that is something that would cause this problem. Any ideas??? Thanks!

I thought that's what that link was for...the crash report I posted to pastebin. I have never used that site before. Sorry.
Alas, I was able to get it work...after 5-6 hours of working on it. I ended up saving it as an IDML (again, the first time didn't work). It replaced all the images with gray squares, but at least I had the content. The images were the least of my worries. I recreated the entire doc (borrowed every page but page 4) to get away from whatever that was about and just redid the layout for page 4. It exported perfectly as a PDF and is now on the boss lady's desk, just in time.
Thank you all for all of your help!

Can PS CS6 cause font problems in In-Design CS4?

Similar Messages

Maybe you are looking for