Can see windows file system, its in the grub menu, can't load it.

Hello.
I can mount and access my window file system. I can also see it's entry in the grub menu, but I cannot load it.
I used os-prober to detect the windows installation and then install grub.
Does anyone know what the problem might be?
This is my file system, just in case:
Number Start (sector) End (sector) Size Code Name
1 2048 206847 100.0 MiB 0700 Microsoft basic data
2 206848 315121663 150.2 GiB 0700 Microsoft basic data
3 315121664 1953520000 781.2 GiB 8300 Linux filesystem
4 1953521664 1953525134 1.7 MiB EF02 BIOS boot partition
Thanks in advance for your time and kind concern.
Jenia.

jenia wrote:
Hello.
I can mount and access my window file system. I can also see it's entry in the grub menu, but I cannot load it.
I used os-prober to detect the windows installation and then install grub.
Does anyone know what the problem might be?
This is my file system, just in case:
Number Start (sector) End (sector) Size Code Name
1 2048 206847 100.0 MiB 0700 Microsoft basic data
2 206848 315121663 150.2 GiB 0700 Microsoft basic data
3 315121664 1953520000 781.2 GiB 8300 Linux filesystem
4 1953521664 1953525134 1.7 MiB EF02 BIOS boot partition
Thanks in advance for your time and kind concern.
Jenia.
After you run
# grub-install --target=i386-pc --recheck /dev/sda
# grub-mkconfig -o /boot/grub/grub.cfg
are there any errors during the mkconfig -o usually its says found this os then this os using os prober. Are you seeing all the os currently installed on your partitions?

Similar Messages

CM Repository - Windows File System on EP(UNIX Platform)?

Hi all,
we have an EP6 SP2 on Unix. We want use CM repository manager to connect remote windows file system which contains all the content. In Global Services we wanted to use the fsmount Service-
We get the following Message:" not supported for SUN OS to Win2000 System"
Is it possible to integrate an Windows File System when you have installed the Portal on a UNIX Platform?
Thanks!

Hello Antonio,
With EP6 SP2 Patch 5 KM on a Unix portal can access windows file systems including ACLs. Please have a look at the corresponing release notes
http://help.sap.com/saphelp_ep60sp2patch5/helpdata/en/4d/8dec404303702ae10000000a155106/frameset.htm
or in the documentation
http://help.sap.com/saphelp_ep60sp2patch5/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm
Kind regards,
Roland

Opening a new file in photoshopcc and the file name is displayed but no white working canvas. you can see it as a layer in the layers panel and if i draw on the grey area i can see int on the layer but not on the main screen.

opening a new file in photoshop cc and the file name is displayed but no white working canvas. you can see it as a layer in the layers panel and if i draw on the grey area i can see int on the layer but not on the main screen.

Graphics card is the problem.
Trying to update drivers now.
Thanks for your help
john

My MBP didn't recognise my password, started it in safe mode, I can see my files, but I don't know what to do next, as the image of reset password isn't selectable. I just moved from PC. Need help please...

My MBP didn't recognise my password, started it in safe mode, I can see my files, but I don't know what to do next, as the image of reset password isn't selectable. I just moved from PC. Need help please...

Safe mode is not what you want in this case. Reboot to recovery mode - hold down cmd-R as the Mac reboots. Go past the language-selection screen, click the Utilities menu, then Terminal. Type:
resetpassword
Followed by the return key, and follow the prompts. Reboot normally when done.
Matt

HT202213 my mac can see windows home sharing but windows cant see my mac home sharing?

Hi,
I have set up home sharing on a mac and a windows pc. My mac ITunes is showing the 'sharing' menu with my windows pc listed however the windows ITunes isn't showing the 'sharing' menu........ can anyone assist please?
thanks

DIngo Dave 69 wrote:
I am running Snow Leopard and on my seperate windows 7 machine I can see and connect to my mac. However I cannot get the Mac to connect to the Windows 7 machine. Even home sharing is not working on itunes.
Can anyone help?
Maybe
On the Win7 machine,
1. Ignore everything to do with Homegroup.
2. Go > Computer > Users > User; right click on User and chose Share with > Specific people; and Set to share with a specific individual or Everyone—both with Read/Write permission.
3. Go Control Panel > Network and Sharing Options > Advanced sharing Settings, and Turn on network discovery, Turn on file and printer sharing, Turn off public folder sharing , and Turn off password protected sharing (unless sharing won’t occur without turning it on).
4. Restart (probably not necessary, but I’d do it).
On the Sno machine,
1. Go System Preferences > Sharing > Check File sharing > Go Options > Enable SMB sharing.
2. Go System Preferences > Network > Select Airport or Ethernet depending on what you are going to be using. I am assuming you will be using wireless below. Let me know if not true.
3. Having selected Airport, select ask to join new networks and show Airport status in menu bar.
4. Click advanced > click remember networks this computer has joined > Click Wins > Enter the ip address of your Win7 machine in the WINS server box > Enter the Win7's workgroup name in the workbook box unless it already is there (look in the drop down menu too). In all likelihood the name is workgroup, but check on the Win7 machine.
5. Restart (probably not necessary, but I’d do it).
Try to connect to your Win7. Use Go menu > Connect to server. In trying to connect, type smb://ipaddress (of the Win7 machine). If, for some reason, you are asked to, input a user name and password, then use you user name and password for the Win7. Don't save anything to Keychain now and actually never for making network connections.

Error in configuring Windows File System Repository

Hi All,
While trying to configure Windows File system repository we are getting the following error
1. Getting this error when we give
<ip address>\<shared folder name>
Startup Error: The localroot does not exist:
10.1.100.44\Shared_folder
2. Getting this error when we give
<ip address>
Startup Error: host is unkown in file path '
10.1.100.44' - invalid network path:
10.1.100.44
Could any one help in solving this issue.
Regards,
Sravanthi

Hi Chiluveru Sravanthi
According to the documentation, there is a difference between the path syntax for the repository manager and the network path. Did you pay attention to this difference when doing your configurations?
Network paths (Network Path)
Specifies the path to the Windows remote server.
The path consists of the IP address of the Windows remote server, and a path specification.
For example,
192.168.0.1share
Alternatively, you can enter the UNC name and path of the server, for example,
servershare.
SAP recommends that you specify the IP address, since you can then check the availability of the server more easily, using the ping command.
Note: It is not sufficient to enter the server name alone. Specifications in the form of c$ cannot be resolved either.
http://help.sap.com/saphelp_nw70/helpdata/EN/63/7f283ac3d7c54b94964931fa1b4ed9/frameset.htm
File System Repository Manager (Root Directory)
This denotes the path to the root directory in the file system to which the repository manager is assigned.
If you want to integrate documents from a Windows system, this can be a drive letter (followed by a colon) or directory path on the local server or a remote server share (for example, //myserver/myshare/somedir).
If you are running your portal on UNIX and want to access the file system on another UNIX host, you must mount the required directory on the portal server.
Example path when using a UNIX system:
/usr/company/share
The repository manager is responsible for the specified directory and all its subdirectories.
Note that multiple repository manager configurations are not allowed to have the same subpath in their Localroot parameter.
http://help.sap.com/saphelp_nw70/helpdata/EN/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Best regards,
Martin Søgaard

Can only view file in its blue psd format when I open them in CS6

Can only view file in its blue psd format when I open them in CS6
Is anyone else having this problem?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Unable to see created File System Repository

Hi,
I have created a File System Repository following the link below:
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
I am not able to do user mapping by going in personalize as I can found my windows System there.
Do I have to create a new system mwhere else.
BTW, I am mapping to a remote window system with the KM.
Please give useful suggestions.
Points given for problem solving answers.
Sumit

Hi,
Example configuration of a WINDOWS® file system repository manager given in the Help.sap.com.
Creating System:
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Specifying User Mapping:
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Senthil K.

Mounting FAT32 windows file system

Hello
I'm new to solaris.
i am using solaris 10 on x86 machine. i'm using 2 hard disks. i installed solaris in one separate hard disk. now i want to mount my windows FAT 32 file system to my solaris.it is installed in another hard disk. any one can help me to use windows file system in solaris.
And i also know how to configure internet setting in solaris.. that is where i can enter the IP address ,Access point name. because i'm using internet using my PDA that is connected to my pc. please help me...
Thanks in Advance.
Prakash.M

PPP and PPPoE configuration are described in the [Network Administration Guide|http://docs.sun.com/app/docs/doc/816-4555/modemtm-1] .
A WWAN device should appear as a serial device in the */dev/term* directory. The [Wireless Wide Area Network|http://www.opensolaris.org/jive/forum.jspa?forumID=134] discussion group is probably the best place to get specific questions answered regarding your setup.

Using JMX for detecting changes in windows file system?

Can anybody help to find way to watch changes in windows file system.........Or say files are transfer in mounted drive i want to start access to those files as and when they come in drive.....do not wait while transferring all files ..

Hi,
JMX is a technology that will let a Java process expose information to a remote client application.
It doesn't define what information to expose, but simply how to make it available externally.
JMX per-se cannot be used to detect the kind of things you describe, but if you are able to detect them, JMX will help you making the information available to external applications.
Hope this helps,
-- daniel
[http://blogs.sun.com/jmxetc|http://blogs.sun.com/jmxetc]

Configure Windows file system repository in local portal system

Hi
can any one give the step by step explanation for Configuring windows file system repository in local portal system .
Thanks
Kirankumar M

Hi Kiran,
Go Through all the docs, It will help you.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/KMC/File%2bSystem%2bRepository%2b-%2bW2KSecurityManager
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/284
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Anyways you have to
1. create a mapping in your windows by Tools -> Map Network Drive (say v:\)
2. Do all the configuration in your portal as per the 3rd link provided like network path and all.
3.Logon to portal with admin perrmission,
then
System Administration -> System Configuration ->Knowledge Management -> Content Management ->Repository Managers -> File System Repository
Configure a new repository manager for your windows system.
Regards
Manisha

Configuring windows file system repository in local portal system(KM)

Hi
can any one give the step by step explanation for Configuring windows file system repository in local portal system .
Thanks
Kirankumar M

Hi Kiran,
Go Through all the docs, It will help you.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/KMC/File%2bSystem%2bRepository%2b-%2bW2KSecurityManager
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/284
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Anyways you have to
1. create a mapping in your windows by Tools -> Map Network Drive (say v:\)
2. Do all the configuration in your portal as per the 3rd link provided like network path and all.
3.Logon to portal with admin perrmission,
then
System Administration -> System Configuration ->Knowledge Management -> Content Management ->Repository Managers -> File System Repository
Configure a new repository manager for your windows system.
Regards
Manisha

Networkdriver use to mount Nas or pc share folder plus vpn you can see your file any where

http://www.box.com/s/7jram4o04175189xbpbe
here is network driver after install it you can mount nas or your pc share folder, combine with vpn you can see your file any where it is the good way to replace FTPit.
http://www.tinhte.vn/attachment.php?attachmentid=442957&stc=1&thumb=1&d=1321272433
http://forums.webosnation.com/nelsun-apps/303257-network-drives-enyo-network-drive-mapper.html
Post relates to: HP TouchPad (WiFi)

I was wondering whether it had anything to do with the network I was using. The router I am using can't access the internet and I am using the basic 192.168.1.X setup with 255.255.255.0 as the mask.
My computer has an ip of 192.168.1.2 and the xbox has an ip of 192.168.1.3. However, I am still unable to ping the xbox or even see it show up in the network. I did notice that whenever I am using another router that is connected to the internet, I can see other windows based computers in the network tab in thunar under "windows network"
Also, I do have a username and password associated with the samba setup.. so I assume maybe that has something do with it. I checked the permissions of the share folder and it was root:root with read and write permissions. I know samba is working fairly well.. but for whatever reason I can't get the xbox to connect even while it is on the same local network.

Windows & File System Repository - security issues

Hello,
I got a strange behavior in EP 6 SP 2 using KM and Windows file systems. Here is the scenario:
- I created a Network Path and a File System Repository pointing to a Windows 2003 File System, following the portal help instructions. Both EP6 server and Windows 2003 server are in the same domain.
- according the KM Monitor, the repository is up and running
- the portal users can access their respectives folders in the file system after having their uids / passwords mapped in the user mapping option
- the portal is assuming the permissions (read & write & list folder & etc) from windows
So far it seemed to be everything ok - but after some tests we got the problem:
- user "A" has his uid/pwd mapped in portal, and read & write access to the file system "dept_folder". He can access the folder through a KM iview, with r/w privileges.
- user "B" has his uid/pwd mapped in portal, and ONLY read access to the file system "dept_folder". He can access the folder through an KM iview, with read privileges.
- and here comes the problem: if user "A" is logged, and user "B" replaces his uid by user "A" uid in the user mapping (only the uid, the password doesn't matter) he can access the file system "dept_folder" with the same privileges than user "A".
I looked in SDN, SAP Notes and SAP Portal Help trying to find an article related to this, no success so far. We have CM Patches 2 & 3 applied, and Patch 4 doesn't have any comment about this specific security problem.
Has someone already face this problem ? Or could be something wrong in my configuration ?
Rgds, and tks in advance
Fernando Cervantes

Hi David
The same occurred here, I think I know the reason. Let me just give you an overview of my configuration:
Network Path id          ccc-ccc1fs-drive_i
Description *           DRIVE I - CCC1FS Server
Network Path *
ccc1fs\Drive_I
Password           *********
Re-Enter Password      *********
User *           ccc\service
The user was provided by the Windows administrator and has full control for this folder.
File System Repository
Description                  File System drive_i CCC1FS Server
Prefix *                /ccc-ccc1fs-drive_i
Root Directory *           //ccc1fs/drive_i
Windows Landscape System      Windows
ACL Manager                Not set
Security Manager          W2KSecurityManager
The important here is the Security Manager configuration - it must be W2KSecurityManager, otherwise you will have the user permissions overrided by admin user permission. And you will need to configure a Windows system landscape too.
I hope this can help you...concerning the bosses, I got the same situation, I said the whole stuff would work fine
Rgds,
Fernando

Can not update tab if its not the default sub-tab.

Can not update tab if its not the default sub-tab.
JDeveloper Version 10.1.2.1.0 (Build 1913)
Hi. I have a problem with a lovOpenWindowAction
The UIX is created with a master UIX and have several sub-tab that is included as UIX-pages.
The lovOpenWindowAction lies in the included UIX-page
The sub-tab I have a problem with has a table with users. Then I have a Create New button than I want to click on and select a new user that should be included in the table in the sub-tab.
When I click on the button I open a LOV-window. Here I select the user that I want to add.
In the LOV Action-class I save my new value in the database. Then in the method onLovUpdate I update the iterator with the new values from the database.
But in my GUI the subtab is not updated until I click on it.
But if I make the subtab the default subtab then it all works just fine and the GUI is updated directly.
Here is the code for the tableAction in the subtab. This code lies in an included UIX-page. Target is the table id.
<tableActions>
<button text="Create New" id=" createNewRollperson" accessKey="N">
<primaryClientAction>
<lovOpenWindowAction destination="FiskeRollpersonerLOV.do"
source=" createNewRollperson "
targets="joinedRollpersfiskeer message"/>
</primaryClientAction>
</button>
</tableActions>
Here is some code from the master UIX-page
<subTabLayout id="flikar">
<subTabs>
<subTabBar selectedIndex="${ui:defaulting(param.index,0)}">
<contents>
<link id="resorFlik" text="Resor"
disabled="${sessionScope.fiske.id == null}"
selected="${(param.source == 'resorFlik') or empty param.source}">
<primaryClientAction>
<firePartialAction event="changeTab" targets="flikar globalHeader">
<parameters>
<parameter key="source" value="resorFlik"/>
</parameters>
</firePartialAction>
</primaryClientAction>
</link>
<link id="rollpersonerFlik" text="Rollpersoner"
disabled="${sessionScope.fiske.id == null}"
selected="${param.source == 'rollpersonerFlik'}">
<primaryClientAction>
<firePartialAction event="changeTab" targets="flikar globalHeader">
<parameters>
<parameter key="source" value="rollpersonerFlik"/>
</parameters>
</firePartialAction>
</primaryClientAction>
</link>
</contents>
</subTabBar>
</subTabs>
<contents>
<switcher childName="${param.source}"
defaultCase=ResorFlik">
<case name="resorFlik">
<include node="${ctrl:parsePage(uix, 'includes/ResorFlik')}"/>
</case>
<case name="rollpersonerFlik">
<include node="${ctrl:parsePage(uix, 'includes/FiskeRollpersonerFlik')}"/>
</case>
</switcher>
</contents>
</subTabLayout>
What am I missing?? I cant have this subtab as the default subtab! Please help me with a solution!

hi,
Change the condition type to manual entry.
or
for example delivery costs will be different at the time of PO and actual delivery costs then at the time of invoice we select planned delivery costs and settle them first with the actual delivery cost.
Thanks & Regards,
Kiran

Can see windows file system, its in the grub menu, can't load it.

Similar Messages

Maybe you are looking for