Can't access Cruzer Extreme 16GB USB 3.0

Strange thing happened to my Cruzer. When I attach it to USB port I hear that characteristic sound that something is plugged. In Device Manager it appears almost instant. But when I open My Computer most of the time I see nothing. When my Cruzer decides to appear in My Computer after few tries I can't open it. Windows shows 0 kb or doesn't show anything. I'm also unable to format it or acces it from Disk Management. Even HDD Low Level Format can't access it. I tried on few PC's with different OS. Result is the same. Any ideas or is it a lost cause? I bought it just 5 months ago

Windows shows 0 kb or doesn't show anything.
I'm also unable to format it or acces it from Disk Management.
Even HDD Low Level Format can't access it.
I tried on few PC's with different OS. Result is the same.
It sounds like you have tried everything PiotrLolo. Hopefully you have the files on it backed up someplace. The good news is since it is new it is under warrantee and can be replaced free of charge. Check out this link for returning it.
http://kb.sandisk.com/app/answers/detail/a_id/5232/~/return-material-authorization-(rma)-process

Similar Messages

Can Not Access Airport Utility or USB Disk Over Wireless with WEP Enabled

I have an AirPort Extreme base station, with several Windows XP (SP2) machines connected to it. I am able to access the base station through the AirPort Utility (v5.1) using the machines that are connected to the base station via ethernet cables. However, when I attempt to configure the base station using a wireless connection on my Win XP laptop, it says that no base stations can be found. It will also not connect to the USB hard drive (no hards drives appear in the AirPort Disk Utility.) I AM able to browse the web via the wireless connection however. When I turn off WEP, the laptop is able to see the base station through the AirPort Utility, so I know it has something to do with the security, but I have not been able to narrow the problem down beyond that.
Any suggestions?
Windows XP

Hi,
I'm having a similar problem. I am using the airport extreme with a MacBook and a PC running windows XP, The MacBook is the computer that I used to configure the settings in the airport utility for the base station. I set it up this way with the assistance of an Apple representative. When I view the disk tab in the airport utility, I can see the USB drive connected to the base station. I can also see the USB drive on the desktop of the Mac. On the PC however, I can't seem to locate the USB drive anywhere. I can't see it anywhere in explorer and the drive doesn't show up when I use an application and attempt to open a file. Does this sound similar to your experience and were you able to resolve the problem?

White screen , can't access recovery disk or usb

hello guys,
so I have an iMac 27" mid 2011
and yesterday I was watching something on youtube, and suddenly the screen was flickring and the screen went black. so I hold the power button to shut down the system. tried to restart it and a white screen come out after the grey apple logo and no log in screen come out
so I tried to log in to the recovery disk and I tried the repair disk and permission. and after that same thing happen white screen after the apple logo.
after that I tried to log to the recovery disk again. but now I can't access it now I have a blue screen with a vertical lines.
so I installed the mountain lion osx from the store to put it in a usb to try booting from it. but same blue screen come out for me. and now I'm stuck and don't know what to do to try fixing this problem.
also I tried all the fixes in apple store discussions site. tried to log with command + v , and I had these logs:
this logs for the Macintosh HD
https://www.dropbox.com/s/ytsvsgqmsdofm7w/IMG_5805.jpg
and this one for the recovery- 10.8 disk :
https://www.dropbox.com/s/pltyw5duptkhqq4/IMG_5807.jpg
and this is the blue screen I get when I log to recovery mode:
https://www.dropbox.com/s/o34oli2s7ziyhl9/IMG_5806.jpg
also I tried the single user command and tried the fsck command to try and repaire the disk, but nothing happened should I use more commands ? please advice me to fix this problem I don't know what to do to fix this. and here in Saudi Arabia there is no apple stores to go to.
thank you in advance.

ok guys I managed to access the Macintosh HD using target mode via my MBP. is there any way I can replace or fix any files to make it boot again ?
please some help here
I have alot of work to do left on me.
thank you

Slow write speeds for Sandisk Extreme 16gb USB 3.0

I had high hopes for this drive after seeing it highly ranked in various USB stick reviews; however, despite the read-speed being as good as I had hoped (at about 200 MB/s), the write-speed is much less than I would have expected, clocking in at about 50MB/s.
I performed these tests on Windows 8, both by copying over a single large file and simply viewing the speed information windows provided, and next by using the "Flash Bench" software. The laptop has an Intel i7, and both my ports are USB 3.0, HDD speed is 7400rpm.
I then tried formatting the drive as FAT, NTFS, exFAT, but in each case the speed did not improve.
Why is the write speed so slow?

I was thinking, are my speeds actually that bad: I did some tests with crystal disk mark to compare with the results in a review here. They get speeds like 195.7MB/s seq read and 61.65MB/s seq write, and they note that this is good. My speeds are actually more like 230MB/s seq read and 50 MB/s write, so it would seem not too far off theirs, and I think this test is reliable as it agrees with the 50MB/s I get for writing a file onto the disk etc. Are other people getting write speeds much faster than 50MB/s when they copy a file onto the USB? I should emphasise I have the 16gb model. It seems again from the review I posted above, that the write speed of the 32gb and 64gb versions is actually much quicker for some reason that the 16gb.

Can't access my Seagate USB HDD on my Airport Extreme

I can not access my 1TB Seagate Freeagent USB Harddrive over the working AEBS network. Hoping to be able to share and stream files to all remote laptops in the house. I have the HD connected to the AEBS and the AEBS client identifies the HD under Disks by name with the correct information. It's set for file sharing and Share Over the WAN. The workgroup is set to WORKGROUP to match my laptop and I've also gone into Windows and dissabled Windows Search per other suggestions on another discussion.
All that said and done, I still can not see or access the HD via my Win7 laptop. I see there are tons of disscussions on this issue and seams many are frustrated because the meager AEBS instructions that come with the unit simply say "Connect the hard disk to the AirPort Extreme USB port using a USB cable. Open AirPort extreme utility, select your base station, and then click Continue. Follow the onscreen instructions to create a new network, if you have not already set up your network." which I already have. Do I need to do this again? Are there any other settings I can do in my Win7 system or in the AEBS system to be able to access my ext HD? I really don't want to format the HD as some users are talking about.
Any thoughts or suggestions woudl be helpful. This was a main selling point for me deciding to buy this router.
Thank you much.

Update...I've also formated my USB HDD to exFAT and still can not access it via the network. It is still completely visable in the AEBS client software. MAC OS was not an option for formating. I thought that exFAT would work since its the newer type of FAT32. Is there a program I can download to format the drive to a MAC OS format and then be able to acces the drive on my four Win7 PC's?
I'm at my wits end with this AEBS and am ready to pull the plug and take it back for an exchange to a Cisco Linux 4200. Please let me know if there is hope for a fix.

Can i access music on my hard drive connected to airport extreme with my iphone 5

Can I access photos and music on my usb hard drive connected to an airport extreme using an iPhone 5? I can access theme with mac and pc.
Thanks, Kevex.

Yes, but not out of the box. You have to download an app like FileBrowser.

Airport Admin Utility can no longer access Airport Extreme, what now?

I have an Airport Extreme that worked fine for a long time with a specific IP. They sold out and the new company came in and installed new equipment. The settings had to change on the Airport. After that, I lost my ability to print through the Airport USB port.
I tried to resolve the problem the other day. My Airport Admin Utility saw the Airport, but I couldn't access it. When I clicked configure, a window came up saying "Reading configuration from base station", then a Password login window came up. I enter my password, it says "Reading configuration from base station", then it says "An error occurred while trying to access the base station. Make sure your network connection is valid and try again.". It does the same thing whether I enter the right or wrong password.
It started working unexpectedly for a little while. I experimented with some settings. Now I can't access it again. The Airport Admin Utility sees the Airport as 10.0.0.0, my laptop's IP says 169.xx.whatever. I thought the Airport was supposed to distribute IP addressed. It did for awhile after I set it that way, but then it went back to 169.xx.whatever.
I'm lost. I don't know how I will ever access the Airport again. Or get my printing capability back.
Help!!!

Ok. I'm going to try a reset on a day where I have some time to mess with it. There are some things I need clarified for me about settings. Please correct me as needed.
In the internet tab:
-Connect using Ethernet is selected.
-Configure Manually was selected before as it is now.
-IP address: do I use their IP or 10.0.0.0 or 10.0.1.1 or what?
-Subnet mask: It used to be 255.255.255.0 now it's 255.255.0.0.
-Router address: What do I put here, use their IP or 10.0.0.0 or 10.0.1.1 or what?
-DNS servers: I will enter their DNS servers.
-Domain name: blank
-WAN Ethernet Port is selected Automatic.
Under Network Tab:
-Distribute IP adresses is checked.
-Share a single IP address (using DHCP & NAT)used to be checked, now Share a rnage of IP addresses (using only DHCP) is checked.
-DHCP Lease: 4 hours. What is best here?
Do I really need to worry about anything else? If the password is reset how to I access from default settings?
Thanks, after this I should have a better understanding of network settings and the AEBS.
J-

HT2421 If I attach a hard drive to the USB port, can I access it from the wired network, while simultaneously creating a separate wifi network with NO access to the hard drive?

I already have a wireless network (call it Network A) with connectivity to various wired and wireless devices. I have a USB hard drive that I directly attach to my MacBook Air. I use it for Time Machine backups and general storage. I would like to move this drive to an AirPort Extreme. I would like to continue to be able to reach it via Network A, but also use the AirPort to create a guest Network (Network B). I don't want the guest network to access the hard drive.
Now, I know I can plug a hub into the USB port and put (I hear up to 3) hard drives on it. Can I determine which ones are accessable by Network A, and by Network B?
Bonzo...

Several things to consider.
You cannot create a wireless network for guests if the AE is bridged. It has to be the main router in the network.
You cannot use the existing TM backups on the USB drive.. if you plug into a network it will need to be wiped.. and only AC model can produce reliable TM backups.. the earlier models are not reliable for TM backups.
See http://pondini.org/TM/Airport.html
These two factors alone may be enough to make you reconsider.
If you can create a guest network.. and you can overcome the limitations of airdisks.. then any person on the guest network should not be able to access the disk drive.. but if you wish to go ahead Bob Timmons might be able to confirm it.. I stay away from USB drives on routers.. I do not and will not use a router as a NAS.. it is underpowered and simply unsuitable long term.. a cheap single disk NAS is many times faster.. more reliable.. and has a marvellous thing called backup.. no USB disk or even internal disk in a TC can back itself up. .nor can TM backup network drives.. so any data you store on a USB drive is going to be gone one day.. unless you go to great lengths to back it up .. to where.. another USB drive plugged into another router somewhere.. the definition of slow.. should be copying files between two usb drives in an apple network using wireless. You will experience new levels of pain and suffering.. likened to the belly of the Sarlacc.

Access AirPort Extrems USB hard drive from Android

I'm starting a new discussion because I erroneously marked my earlier discussion "solved".
I've been using a USB connected disk drive on my AirPort Extreme from my Android tablet for years. Since upgrading the AirPort to version 7.6.4 I can no longer access the disk drive from the tablet. I have not changed anything on the tablet, only the AirPort.
The tablet can see the AirPort itself as 10.0.1.1 and can see the attached disk drive, but when I try to access the drive I get a series of possible errors including Firewall issues, SMB service is off or out of scope and WLAN is off.
I don't know how to look at the firewall on the AirPort or check on the SMB service (I can't find either topic in AirPort Utility).
I have tried a factory reset, and also reverting back to version 7.5.2 as suggested in the other thread, but I still get the same message when I try to connect.
The drive is fully accessible from either of the two Macs on the network.
Please help - I really need to access files on this disk from the tablet. I konw Dropbox will work, but ti's cumbersome and I don't really want some of the files to live on Dropbox.
Walt

I would venture to say that the issue may be related to the AirPort firmware update not being compatible with the current version of firmware on your Android tablet. Of course, you probably already know this. I'm not aware of any incompatibilities between these two devices as Apple has not provided any information on this.
As far as firewall on the AirPort, unless you are accessing the Extreme from a remote location its NAT firewall would be a mute issue. About SMB, this is automatically enabled when you configure the Extreme to share out an external USB HDD. So there is no setting to change there either.
I have tried a factory reset, and also reverting back to version 7.5.2 as suggested in the other thread, but I still get the same message when I try to connect.
If your Android was not having this issue when the Extreme was running 7.5.2 firmware, but is now after downgrading it to this version tends to make me believe the issuse may be with your tablet. Is there a potential firmware update for it?

I can not access the hard drive connected to my airport extreme! Any thoughts?

I can not access the hard drive connected to my ariport extreme. When I use the finder to connect a server and type in the IP of the a. extreme, 10.0.1.1 it does not work and I get an error message.
Any thoughts.
A

Is the hard drive formatted for Mac in Mac OS Extended (Journaled)?
If yes, you may need to use a powered USB hub since the USB port on the AirPort Extreme is under powered and it is often necessary to use a powered hub....even if the hard drive has its own power supply
If both items check out above.....have you checked Finder Preferences to make sure that "Connected Servers" will be displayed?
Finder Preferences > General > Show These Items on the Desktop > Connected Servers
Then with the Finder menus displayed at the top of the screen click the Go menu
Click Network and the AirPort Extreme icon should be displayed
Double click the icon to mount the drive on the desktop

Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up

Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up with it for months, until june 7 when I decided it has been long enough, and I got a replacement. I told the genius bar what happened, and I already did the so called "steps" that apple reccommended on the site, which was reset network settings, restore iPhone. The genius bar gave me a replacement phone, so I was expecting that the problem would be over, but it isn't. It seems that it's iOS 6.1.3 which is the case of most public complaints on apple iPhone products. Not even 3 weeks after I got the phone replaced, it is doing it again, so I suspect I'm just going to get a replacement again? Unfortunately I only have until 5th of july 2013 until my 1 year warranty is up. After that, any issue I have, I have to purchase apple care. People are expecting this problem to be fixed but I don't see it being solved any time soon. This is horrible and really low, because I have been a good customer, when I talk to the people at the genius bar, I show the utmost respect I can to them for the work they put into their job, but somewhere there is a problem where something has gone wrong. Because of that, people that only have a one year warranty (which i received because I purchased my apple iPhone at an Optus outlet, once that one year warranty is up, I have to pay for a problem that isn't even my fault? That isn't how it should work, you should be fixing this problem so people can be happy customers and leave happy. Obviously you don't all know how to do your jobs, because if you did, we wouldn't have this problem. I would like a replacement phone, ONCE AGAIN. If this problem occurs again, I will simply stop buying your products, and lose faith in your company, your's sincerely, Jack Maher.

This is a user to user help forum only. You are not addressing Apple here.
My iPhone 4S, iPhone 5, and iPad 2 are running 6.1.3 with no such problem and the same with the overwhelming majority of iOS devices running 6.1.3.

How can I access an unsupported usb device that's seen by system profiler

is there a way to access an unsupported usb device? my parents bought my daughter a cheap and easy to use digital camera and I am looking for a way to access the photos. the camera's manual mentions that there is no mac driver and there are no plans to develop one. I plug it in anyways in the event the system / Iphoto recognizes this, But I get nothing on the desktop as in a generic disk image icon. I open system profiler and My G4 knows the camera is plugged in. If this interface between the two is recognized how can I access the camera?
does a driver have to be written to allow access? I saw a usb dev kit on version tracker but I have no clue as to how to write a driver. I could get a flash card reader but I was hoping that there may be some back door or an app somewhere to allow me to get the photos off the camera.
thanks!!!

Hi, Israel.
You wrote: " I plug it in anyways in the event the system / Iphoto recognizes this"See if Image Capture recognizes the camera. Launch Image Capture, which is in the Macintosh HD > Applications folder.
Otherwise, you're probably going to have to go the route of using a card reader. While the connection may be USB, they may be using some non-standard implementation that requires a driver.
Writing drivers is not something you'd want to even attempt since you didn't create the hardware!
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Yes, if the drive is formatted in Mac OS Extended (Journaled).
The USB port on the Time Capsule is under powered, so you may need use a powered USB hub with the 4 TB drive...even if it has its own power supply.

Can't access the Time Capsule Drive and attached USB drive

I bought the 3 TB Time capsule a couple of months ago. I am using it as my wireless router for a cable modem and have attached a USB drive (seagate) to the TC. I use the TC drive for time machine only. It worked well at first, for about the first month. Now I have trouble accessing the TC drive as well as the USB drive. The router function works perfectly fine. The drives show up in the Finder under Shared but cannot connect. Time machine does not back up because it says the back up drive is not available. In disc utility, the base station shows with the correct name, but I can't access it. It asks for a pasword but does not respond, so I cannot reboot it from my computer.
If I restart the TC (power off and on), it works fine, I can access both drives. However, this problem recurs, sometimes within a few days. I have also noticed, which may be related, that when I enter time machine (when everything is working fine), some of the back-ups are blank. There is a date and time but no actual back-up. Not sure if this is related.
I'm runing Mavericks 10.9.2 on an older MacBook, 15" late 2008 with 2.4 ghz dual core.

Hi Bob,
I updated Mavericks but still had the same problem, so I did a hard reset on TC, although I held the button for over 5 seconds and the amber light was flashing rapidly, it acted like a soft reset. Still no change so I rebooted my laptop. Still had an excellent internet connection but in AirPort utility, the TC is grayed out and says device not found. Light on TC was amber. So, I tried a hard reset again, but the light wouldn't flash at all. Unplugged it and after pluggin back in, acted like a hard reset. I restored previous settings and it is fine for the moment. Will keep you posted if it recurs. Hopefully it will not with updated Mavericks, but I get the feeling the problem may be the TC.

Can I access my files stored in the hard disk connected to airport extreme when I am away? how?

Can I access my files stored in the hard disk connected to airport extreme when i am away? How?

You can't technically. iPads cannot directly read HDDs like a computer can.
You will need an app liie FileBrowser to do this. Of course all file operations will be done through the App itself.
https://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8

Can't access Cruzer Extreme 16GB USB 3.0

Similar Messages

Maybe you are looking for