Can't access "Range Retrieval" & "Butterfly report" features in smart view

Hi Experts,
I need your help regarding enabling new features of smart view.
I am not able to use the following feature of smart view:
- Range Retrieval
- Butterfly report
Do I have to configure any settings to enable this feature??
Currently I am using the following:
smart view client: 11.1.2.2.00
smart view provider: 11.1.2.1.00
Essbase: not sure (will try to get the info if needed)
Thanks in advance experts

Hi Glenn,
Thank you for your response.
That must be the cause.
I saw a documentation that the smart view 11.1.2.2 is compatible with service provider 11.1.2.X,
but did not mention any loss in functionality for earlier versions like 11.1.2.1.00.
maybe I missed it.
Thanks again for your help

Similar Messages

Not able to export web analysis report to excel smart view from workspace

Not able to export web analysis report to excel smart view from workspace.
Error :Web launch operation has been cancelled.
Can anyone help me to resolve this issues

I realized that I can put a block in WebI and then I can pull that in excel alongside of static header, after putting the question.
My interest to know whether it is by design in XI 3.0 or it is an issue. But by the replies it seems to me like it is by design.
@Anis: I can't go for header as part of Body. Because this report is viewed in Web by many other users. I can't have separate report for Live office, it is a restriction for me. If I use the header in body, it wont look good I guess.

Can't access range expander's home page.

So I just upgraded my range expander's firmware after a long time trying (great success!), but now I can't access the site once more... I used the default of 192.168.1.240 first, but now, it won't work. Could upgrading the firmware have changed the IP?

No it is not possible that the upgrade ... changes the Ip address for the Device .... once you upgraded the Range Extender ..... reset it for few seconds .... while holding the reset ... unplug & replug the power cable ....
Assign static Ip to the Local Area Connection & try to ping the Ip - 192.168.1.240 ....
See if it opens the setup page ....

Issue importing interactive reporting into excel smart view 9.3

I am new to smart view, and while importing an interactive document from a system9 portal in excel, it always returns "Error Accessing Import Data", after clicking finish in the wizard, even though i was able to preview the document in the previous step. This also happens for a few other colleagues.
Wondering if anyone out there may be able to suggest possible root causes, would be greatly appreciated
Thanks
Jeffrey

Copy the HsAddIn.dll, HsSpread.dll, HyperionSmartTag.dll and HsTbar.xla from the Bin folder in the install home of SmartView path : <Drive:>\Oracle\SmartView\Bin (by default)
Paste the files into the Add Ins folder for that user: C:\document and settings\<User>\ApplicationData\Microsoft\AddIns
Click the Start Button, then in the "Start Search" box type CMD but DO NOT press Enter yet.
Program cmd.exe should be found. Right-click on cmd.exe and choose "Run as Administrator" and click "Continue".
In the command line window register each file from point 1 using regsvr32 command:
regsvr32 C:\Documents and Settings\<username>\Application Data\Microsoft\AddIns\HsAddIn.dll
In the Excel 2007 Go to Tools > AddIns > Browser for HsTbar.xla in the AddIns folder and then click OK.
HTH-
Jasmine.

Can we display attributes when opening a form in smart view

Hi Everyone,
If a form has attribute members in a row, the web view displays the attributes, but smart view doesn't. Is this a bug?
Thanks,
Sayantan

Hi Kiran,
I am not quite sure about what you meant actually. I simply have a form which has some attributes for each member in rows. I can see the attributes for in the web view. However, when opened in Smart View, the attributes are not shown (the columns themselves are missing).
Can you please explain in detail? It would be really helpful if I can find an answer to this.
Thanks,
Sayantan
PS: Why would a user need to create an ADHOC query for viewing a form in Smart View?

RVS4000 Can't access the IP Based ACL feature

We had the default ACL allow any-any ever since we've had the RVS4000. Then today I tried to create a simple ACL to deny a LAN IP from accessing all destinations. After restarting the router, I cannot access that feature any more. I can access everything else but when if I go to IP Based ACL, it gives me the "Page cant be displayed error". I've tried accessing from 3 different browsers.
Any clues why this might be happening?

Hello,
I'm sorry you are having issues with the devices and I can honestly say I have no idea why it is behaving like this, but I do have a few suggestions that may help getting the device to work correctly again.
1- I will consider upgrading the firmware if it is not on the latest. If your device is hardware version 1, the latest available firmware is 1.3.3.6, if it is hardware version 2 then you will need to be on 2.0.3.4.
Here is a link to the firmware download page for the device.
https://software.cisco.com/download/release.html?mdfid=282414013&softwareid=282465789&release=1.3.3.6&relind=AVAILABLE&rellifecycle=&reltype=latest
2- After the firmware upgrade or if you are already running the latest firmware, try to access the device using Internet Explorer 11 and enable the Compatibility View Option. For you to do this, just go to the gear icon on the right hand side at the top f the page, then select Compatibility View and add the IP address of the router to the list.
I hope this helps. Please let us know.

Does anybody noticed that new iPad can be access without security code when using twice smart cover

New iPad has the same problem like iPad 2 with smart cover allowing accessing home page without putting security code
Very serious problem
Just try to put cover ones and open when security code screen appears don't do anything close cover, open again and you are in home page
Risky eh?
Lesio

Lesio wrote:
New iPad has the same problem like iPad 2 with smart cover allowing accessing home page without putting security code
My iPad 2 certainly does not do this with its magnetic cover. I call BS on this -- there's no way that happens as you've described.

Can I access movies from time capsule in my smart tv?

Can I watch movies stored in the hard disk attached to my airport extreme from my smart tv?

That depends on your TV, if it has the ability to connect to a networked drive or not. Check the manual.

Calendar can't access/insert events on a specific date

Since 2009 I've been experiencing problems inserting and viewing events around the day october 17th - weird but is my marriage date.
I know that very well because was the time I started using alot more the calendar because of the huge "to do lists" I had that time. Since then I tried to export date (backup) delete the files and restore the date. Somehow every oct 17th on my calendar (+one day more o less) is blocked on my computer.
Unfortunately I don't have a genius bar in Brasil and during trips to the US I always had limited time and in Miami a representative asked me to re-install everything but wasn't possible at that time. I did it afterwords - by myself - and didn't chance. Now, with mavericks I went to 2010 for no reason and found out it is finaly working fine all years since 2009. Problem: now the October 20th is behaving just like.
Seem to me that I can't access the day but when I change de view from month to week I see there's no sunday oct 20th at all (see attach_1) and whe I change to daily view the right side of the day is empty and all my tries to add an event on the 20th ended up on the 19th...
What can I do ? I use macbook air with mavericks just upgraded.
Thank you.
Claudio.
Rio de Janeiro - Brasil.

Hi,
Your problem seems to be similar to mine, with events changing 1 day position.
https://discussions.apple.com/message/23568141#23568141
Before Mavericks I used latest Mountain Lion, without this problem for sure.
To me, seems like a bug that Apple needs to solve.
Regards,
Fabrício

How to show more than one report in a same Viewer or Form

Dear all,
I have develop many reports with CrystaReport XI and I'm using the CrystalReportViewer to show each of them in VB6. My Question is: Can I show more than one report in a same Viewer? if i need to show the report1.rpt and report2.rpt in a same window how can I do it?
Sérgio Salazar - Brazilian VB developer

No and Please re-post if this is still an issue to the Legacy Application Development SDKs Forum or purchase a case and have a dedicated support engineer work with you directly

Having trouble with Tiscali/TalkTalk site when accessed with 'FireFox', can't 'reply' to emails or report 'spam', other functions seem ok

Having trouble with Tiscali/TalkTalk site when accessed with 'FireFox',
can't 'reply' to emails or report 'spam', other functions seem ok
== This happened ==
Every time Firefox opened
== On/Off few months now all time

Try deleting cookies and cache:
1. Tools| Clear recent history
2. Time range to clear: Everything
3. If it isn't already selected, select '''Cookies''' and '''Cache'''
4. '''Clear now'''
<u>Check cookie exceptions</u>
1. Tools | Options | Privacy Panel
2. Set '''Firefox will: Use custom settings for history''' Insure Accept cookies for sites and accept third-party cookies is selected
3. Click '''Exceptions'''. If the misbehaving site is in that list, select it and click '''Remove site'''
Also see [[Updating Firefox]]

TS4062 I cannot get a WiFi signal, which means that I cannot access all of the other features on my ipod. Is there anyway I can access all of the other features without Siri or WiFi?

I cannot get a WiFi signal, which means that I cannot access all of the other features on my ipod. Is there anyway I can access all of the other features without Siri or WiFi?

Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
BTW Apple doesn't offer free support for this kind of issue with iTunes.
tt2

Can't access fault reporting page

Everytime i open the page to report a fault with my home phone line all i get is a blank screen. Is this a problem with BT's server? Although i can access the business fault reporting page.

I think the fault reporting pages are having 'issues', also there was a problem with certain number ranges not being recognised by bt.com faults.
If you have a 10 digit number (instead of 11) you might want to try calling the hep desk instead on 0800 800 151.

Discoverer Report Can i Access these report vie Internet

Dear Sir,
Can i access the report from cyber cafe(Web Enabled) that is generated with oracle 9i Discoverer. If YES then How ?
If NO then Why
OR
any other version from which we can access the report from cyber cafe that created with discoverer

Hi Felix,
of course. this works. In the customer exit you can read in step 2 the variables from the input screen.
function z_bw_e_zepcfiscyvvg.
*"*"Lokale Schnittstelle:
*" IMPORTING
*"     VALUE(I_VNAM) TYPE RSZGLOBV-VNAM
*"     VALUE(I_VARTYP) TYPE RSZGLOBV-VARTYP
*"     VALUE(I_IOBJNM) TYPE RSZGLOBV-IOBJNM
*"     VALUE(I_S_COB_PRO) TYPE RSD_S_COB_PRO
*"     VALUE(I_S_RKB1D) TYPE RSR_S_RKB1D
*"     VALUE(I_PERIV) TYPE RRO01_S_RKB1F-PERIV
*"     VALUE(I_T_VAR_RANGE) TYPE RRS0_T_VAR_RANGE
*"     VALUE(I_STEP) TYPE I DEFAULT 0
*" EXPORTING
*"     VALUE(E_T_RANGE) TYPE RSR_T_RANGESID
*"     VALUE(E_MEEHT) TYPE RSZGLOBV-MEEHT
*"     VALUE(E_MEFAC) TYPE RSZGLOBV-MEFAC
*"     VALUE(E_WAERS) TYPE RSZGLOBV-WAERS
*"     VALUE(E_WHFAC) TYPE RSZGLOBV-WHFAC
*" CHANGING
*"     VALUE(C_S_CUSTOMER) TYPE RRO04_S_CUSTOMER OPTIONAL
data: wa_e_t_range     type line of rsr_t_rangesid,
        wa_i_t_var_range type rrrangeexit.
data: l_month(2) type n,
        l_year(4) type n.
case i_step.
    when '2'.
      read table i_t_var_range
           into wa_i_t_var_range
           with key vnam = 'M_SEV_01'.
      l_month = wa_i_t_var_range-low+4(2).
      l_year = wa_i_t_var_range-low+0(4).
      if l_month = '01' or l_month = '02'.
        l_year = l_year - 3.
      else.
        l_year = l_year - 2.
      endif.
      wa_e_t_range-low = l_year.
      wa_e_t_range-opt = 'EQ'.
      wa_e_t_range-sign = 'I'.
      append wa_e_t_range to e_t_range.
endcase.
endfunction.
Variable 'M_SEV_01' is a input variable for calmonth. From this variable the coding extract the fiscal year.
Sven

Can we access report date wise?

hi all
can we access report date wise if yes then plz guide me?
i made two text items,one for start date and second one for end date in form.if i issue date in these two text items like this
start date: 01/08/2009 End date: 08/08/2009 and after pressing the when_button_pressed and it give me the report up to giving date,is it possible?
plz help me and guide me more
thanks in advance
sarah

hi sir
sir i got an error in the following code
SET_REPORT_OBJECT_PROPERTY(rep, REPORT_OTHER , 'P_START="' || TO_CHAR(:BLOCK.START_DATE, 'DD.MM.YYYY') || '" P_END="'|| TO_CHAR(:BLOCK.END_DATE, 'DD.MM.YYYY') || '"');
here is the error:" to many declaration of 'To_char' match this call"
my table name is date1
and table structure is
name
address
start_date
end_date
and i used this where query WHERE COLUMN BETWEEN TO_DATE(:P_START, 'DD.MM.YYYY') AND TO_DATE(:P_END, 'DD.MM.YYYY') in the form where caluse
i am using u r codes for displaying report which one you posted yesterday
sarah

Can't access "Range Retrieval" & "Butterfly report" features in smart view

Similar Messages

Maybe you are looking for