Can't Access the web administration page

Hello,
I have a new Linksys router that I installed a few months ago.  I am trying to connect my PS3 using wireless.  the PS3 sees the access point SSID, but keeps failing to connect.  I have double/triple check the WEP2 key and it is correct.  I am also having problems accessing the web administration page.  I keep getting page not found.  I don't think that I have access the web administration page since I set it up.  I can ping the router, so I know that its up, along with getting out to the Internet, I have used NMAP and scanned the router, but only 10080 is open (PS3) port.  I assume that the default URL for the web administration page is http://192.168.1.1.  There is no port needed to put in the URL is there?  Also, since NMAP showed no ports open does that mean that the web server in the router is not listen?  If so how do I connect without having to reset the router?
I do have some Cisco Linksys app that shows a GUI of my network, but no adminisration help.
Thanks,

Who is your ISP..?
Are you able to go online on the wired computer...?
Make sure the computer is connected to the router on the Ethernet port and check the ip address first...Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then,Adjust the browser settings....Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
Now,try to open the setup page again...

Similar Messages

  • TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

    I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

    amarilysfl wrote:
    "Your disk could not be partitioned. An error occurred while partitioning the disk".
    https://www.apple.com/support/bootcamp/
    If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
    Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
    Once it's completed, try creating a partiton again in BootCamp.
    If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
    reboot and attempt Bootcamp again.
    If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
    To fix this
    BootCamp: "This disc can not be partitioned/impossible to move files."
    How to safely defrag a Mac's hard drive

  • I bought an EE sim, I've added a £15 smart pack but can't access the web

    I bought  an EE sim, I've added a £15 smart pack but can't access the web, it's an unlocked Galaxy S3, has anyone else had this issue? 

    Can you make calls & texts?
    Have you selected a Network Operator under Settings / Connection / More Networks / Mobile Networks?

  • Can't access the web-site in my home folder from the internet.  Need help.

    I am trying to publish a website from the Sites folder in my home directory. The website is made and I can access it from from every computer within my ethernet. But despite a couple attempts I made I can not get the website published on the internet.
    I have an Airport Express station. Two Macs and one PC are using the ethernet. As far as I can tell the Airport Express station is directly connected to the internet. I live in a brand new apartment which has Lan outlets in every room next to the electricity outlets. I have a single designated internet IP address.
    To open my computer to the internet I set the "Default Host Option" in the Airport Administrator Utility and selected the default three digits for the "Default Host option" IP address. Then I updated the Airport Express station, manually set the IP address in the Network preferences on my Mac to the "Default Host option" IP address and activated Personal Web Sharing in the Sharing preferences. By doing so I lost my internet connection. It turned out I still had the same IP address that I had before I selected Default Host Option.
    As I understand with the Default Host Option I designate one IP address within the ethernet to receive all traffic from outside. But how do you now tell the Airport Express station which computer on the ethernet will be the host for the incoming traffic carrying the Default Host Option IP address? Apparently just setting the IP address manually in the clients computer Network preferences to the "Default Host Option" IP address doesn't tell the Airport Express station to change the IP address it has assigned to this client to the Default Host Option IP address.
    In another attempt to make my website accessible on the internet I removed the Default Host Option and instead opened Public Port 80 and Private Port 80 for the IP address of the client computer in the Port Mapping tap of the Airport Administrator Utility. But again, no access to my website from the internet.
    To access the website from within the ethernet I use the following web-link, which works fine:
    http://192.xxx.x.x/~user/index.html
    The internet of course doesn't see the 193 IP address. It only sees the Public IP address. Therefore I used the Public address instead of the Private IP address to connect to my website from the internet:
    http://222.xxx.xxx.xxx/~user/index.html
    But as I said, I still can't access the website from the internet.
    I have the feeling that I conceptually don't understand something correctly. I would appreciate if somebody could help me with this problem.

    See this article:
    http://support.apple.com/kb/HT1866
    Sometimes My Music does not show up in special folders in TweakUI.
    If so, see this post:
    http://discussions.apple.com/thread.jspa?messageID=1731188&#1731188##
    If you would rather not mess with the registry you can often work round with a shift key start.
    Hold down the shift key and start iTunes, keep holding down the shift key until you are asked to choose or create a library. If you already have one, navigate to your iTunes folder and choose iTunes Library.itl. Otherwise create a new library in My music.

  • Can't access the web but can screen share and secure shell on my network???

    Hi,
    I don't know if this is relevant, but I installed a security patch along with a safari patch the other day and the next morning, I could not access the internet, however I can do things like screen share and ssh. I cannot however view internal websites on my network, whether I'm connected via airport or ethernet cable (attached to either time capsule or the modem directly). Whenever I try to go to a website in either firefox or Safari, I get a message saying I'm not connected to the internet and a "Network Diagnostics" button (which says it cannot fix my problem). Here is what I've tried:
    -Repair Disk (everything OK)
    -Repair Permissions
    -Restart computer
    -Turn Airport card off then on
    -Restart modem and routers, one by one in daisy chain order (and then restarted computer)
    -Tried different browsers
    -Tried connecting directly to modem via Ethernet cable in addition to wireless
    -Restored the System from a time-capsule backup from Sept. 6th (noticed the problem on the 10th)
    -Turned off my firewall
    -Created a new user account and tried it
    -Let my computer remain off for a half hour
    -Zapped the p-ram
    Here's what I've confirmed I CAN'T do:
    -Access the web via either Safari or firefox (haven't tried any other browsers)
    -Access the Software Update Server
    -My iCal calendars cannot access the webdav server
    Surprisingly, here's what I've confirmed I CAN do:
    -Ping other computers on my network
    -Use the Screen Sharing App. with computers on my network
    -Access the internet from every other computer on my network (4 of them)
    -ssh to other computers on my network
    I've been using my computer infrequently lately, and I'm not sure when the last time was I accessed the internet or for that matter when I performed the security patching, but I'm pretty sure it was within the last week and a half. I really don't want to try restoring from an earlier backup, but I'm reaching the end of my rope. Anyone have any other ideas? I'm fresh out.
    Rob

    The problem was either the Security Patch 2010-005 or the Safari update (though I don't have the version number in front of me). Note, I had ignored the iTunes 10 update. I assume that I must have miscalculated the date I performed the updates because the problem persisted after restore from a Sept. 6th backup off my time capsule.
    I went to the Apple Store and they were able to restore full internet access by performing a 10.5.8 combo-update. When we ran Software Update at the Apple Store, the 3 updates were again there available for download, but I am going to ignore them all because of this issue. The people at the apple store agreed that it was the update which caused the problem.
    Rob

  • How can I restore the web address page and not be directed to a search engine?

    My address bar has disappeared. Whenever I want a new address and type it in I am diverted to a search engine which locates the address I have typed in. I cannot get to the preferences bar to make corrections.
    I use Windows 8. All was fine until a few weeks ago when something changed my Firefox system.

    Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible.
    *Firefox menu button > Options
    *View > Toolbars (press F10 to display the menu bar)
    *Right-click empty toolbar area
    Use Toolbar Layout (Customize) to open the Customize window and set which toolbar items to display.
    *check that "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    *if "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette into the Customize window to the Bookmarks Toolbar
    *if missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
    *if you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar setup
    *https://support.mozilla.org/kb/How+to+customize+the+toolbar
    *https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing
    You can check for problems caused by a corrupted localstore.rdf file if the above didn't help.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Can't access the web setup utility - server says: level_15_access

    I've been using a Dlink router, and wasn't getting any range on my network, so I tried to setup my linksys wrt150-n v1.1 router. I pressed the reset key for about 20 seconds, then unplugged both my modem (cable) and router, then plugged them back in. When I opened a browser window and typed http://198.162.1.1, instead of opening the setup page, I get a message saying "the server http://198.162.1.1:80 requires a username and password. The server says: level_15_access"  
    I left the user name blank, and used the default password admin, and that does nothing. 
    Tried resetting the router about 4 or 5 times with no luck. Any ideas about what I'm overlooking? I don't have the router setup CD that originally came with the router, and there isn't a downloadable file - I should be able to, and have in the past been able to just use the default IP and admin PW.
    Thanks!
    Solved!
    Go to Solution.

    Try a Hard Reset:
    Hard Reset (aka 30/30/30 reset):
    The following procedure will clear out the NVRAM and set dd-wrt back to default values:
    With the unit powered on, press and hold the reset button on back of unit for 30 seconds
    Without releasing the reset button, unplug the unit and hold reset for another 30 seconds
    Plug the unit back in STILL holding the reset button a final 30 seconds 
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • TS1398 I can't access to the web pages thro' Wi-Fi, after switching on the wi-fi.But if I switch off the iphone andswitch on the phone then I can get the web pages.Daily I have to repeat this process to access the web pages.help to solve the problem.

    I can't access the web pages thro' wi-fi,But if I switch off the phone and thenswitch on the phone again I am able to access the web pages.Daily I have to repeat this process.help to solve this problem.

    Does using 192.168.1.1 get you to the web page?
    Firmware Update Process
    To safely update FW, I recommend doing the following: Download the FW file from the support site first.
    Disable the auto update feature on the router.
    1. Save router config to file first using IE or FF with all security add-ons disabled.
    2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=9d2ff02077f645679972a...
    3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=0a6881b90224439b92c8d...
    4. Factory reset the router and then set up from scratch first using the local log in link and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
    PC Web Browser Configurations
    What browser are you using?
    If IE 8, 9, 10 or 11, set compatibility mode and test again.
    Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
    Clear all browser caches.
    Be sure to log into the local log-in account on the router first.

  • Can't access teaming web page

    Hi, I've installed teaming 2.1 on a sles11 x64 virtual machine. I've used sun java jdk 1.6.21. After install I start the teaming server but then can't access the web page (I've used port 8080 in the URL). I used default network settings. I believe the mysql database has been created correctly. I think the problem is with Tomcat/java. I've included the output of tail --f catalina.out
    /opt/novell/teaming/apache-tomcat-6.0.18/bin/catalina.sh: line 309: /usr/jre/bin/java: No such file or directory
    Error occurred during initialization of VM
    Could not reserve enough space for object heap
    Could not create the Java virtual machine.
    Error occurred during initialization of VM
    Could not reserve enough space for object heap
    Could not create the Java virtual machine.
    Error occurred during initialization of VM
    Could not reserve enough space for object heap
    Could not create the Java virtual machine.
    the path shown in the first line of this output is not what I specified for java during the installation of teaming (I used /usr/java/jdk1.6.0_21). Any help would be greatly appreciated
    Lou

    Hi Lou,
    Have you set an environment var for the JAVA_HOME?
    you can set it system wide, create or edit /etc/profile.local, and add:
    export JAVA_HOME=/usr/java/jdk1.6.0_21
    Then reboot the system so the env var gets set globally.
    If the site is still not accessible, rerun the Teaming install choosing to reconfigure, double check the JAVA_HOME path set and see if that does the trick.
    Cheers,
    Willem

  • I can not access the program

    Suddenly I can not access the keynote & pages & number (program)

    did you try a hard reboot? Hold down the sleep button until the slider appears and slide to shut down. restart with the power button.
    Jason

  • How is the web administration Console accessed

    I found the following info in a support document, but have not been able to ge the admin console to appear. Is there something I need to install apart from the server tools to get it to appear?
    By default, the web administration console is accessed with port 8888. This port can be changed within the License Server Configuration section of the web administration software. This port should not require special configuration of the firewall.
    While Rdp'ed onto the server, In Internet Explorer 6, typing in http://000.000.000.000:8888
    (where 000.000.000.000 is my servers IP)

    Sammy,<br /><br />If you are trying to access the License Server Console from the same machine where you're running the License Server Tools software, use the following URL:<br /><br />   http://localhost:<port>/agent/<br /><br />If you are accessing the License Server Console remotely on your intranet, use the following URL:<br /><br />   http://<hostname>:<port>/agent/<br /><br />You can also use:<br /><br />   http://<IP_address>:<port>/agent/<br /><br />You can review the License Server Tools guide at http://www.adobe.com/elicensing/licensemanagement/alm/pdfs/server_tools_user_guide.pdf for additional information.

  • TS3274 I can't access some web pages with safari like, forever 21, express. Even though I used to access them previously. Why?

    I can't access some web pages with safari like forever 21, express .com. Even though I used to access them previously

    Ashlee...
    Since the apps you mentioned require an internet connection try running the connectivity tests >  iTunes for Windows: Network Connectivity Tests

  • My ipad mini doesn't have a web browser! Help. I can't access the internet or iTunes or the app store. The web browser icon isn't even there.Anyone know what to do?

    My ipad mini doesn't have a web browser! Help. I can't access the internet or iTunes or the app store. The web browser icon isn't even there.Anyone know what to do?

    I'd maybe try doing a search for Safari on your iPad first (swipe to the left to search). If it shows up in that search you can go to Settings > General > Reset and choose 'reset home screen layout' which will put it back where it would be by default.
    All else fails? Restore it.

  • Haveing problems with Safari. It gives me an error message. Safari can't open the web page, because it can't establish a secure connection to the server. It only seams to have a problem on https sites. Any help would be apreciated.

    Safari keeps giving  and error message. " Safari can't open the web page( insert web page here) , because it can't establish a secure connetion to the server.
    It only seams to have a problem with https sites.
    Any help would be appreciated

    The "s" in "https" indicates the site is a secure server--usually a site that will require a password.  Connections to secure servers can be blocked by parental controls.  Are you using any parental controls, either through OSX's settings (in System Preferences) or third party parental control software (such as Netnanny)?  If so, check the settings to make sure they will allow the connection.

  • HT201380 Yesterday this was automatically installed.  Today I can't access a document in Pages.  A prompt says I need a Pages update.  But the next screen tests for updates and informs me everything is up to date.  What's up?

    Yesterday this was automatically installed.  Today I can't access a document in Pages.  A prompt says I need a Pages update.  But the next screen tests for updates and informs me everything is up to date.  What's up?

    It's highly unlikely that the Pages update problem has anything to do with the ARD client update, since the client is not involved in any way with Software Update. I'd suggest asking for assistance with the update problem in the forum appropriate for your version of Mac OS X.
    Regards.

Maybe you are looking for