Can't connect to all sites outside from inside

Dear forum,
For some reason there are some sites that I cannot access websites from inside interface.
One such example is lxer.com where I am receiving this message in the browser:
The connection has timed out
          The server at www.lxer.com is taking too long to respond.
This has "suddenly" happened, and so I am wondering what others have done when such things has happened.
My outside has a dhcp-IP, and I have noticed that this address had changed, so I corrected this in my router settings.
ASA version is 5505
These are my settings:
: Saved
ASA Version 8.4(2)
hostname ciscoasa
domain-name example.no
enable password 123412321 encrypted
passwd 1231231 encrypted
names
interface Ethernet0/0
switchport access vlan 2
speed 100
duplex full
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
switchport access vlan 12
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp
interface Vlan12
no forward interface Vlan1
nameif DMZ
security-level 50
ip address 192.168.2.1 255.255.255.0
ftp mode passive
clock timezone CEST 1
clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
dns domain-lookup inside
dns domain-lookup outside
dns domain-lookup DMZ
dns server-group DefaultDNS
name-server 193.75.75.75
name-server 192.168.1.11
name-server 192.168.1.12
name-server 193.75.75.193
domain-name example.no
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network inside-net
subnet 192.168.1.0 255.255.255.0
object network NETWORK_OBJ_10.10.10.0_28
subnet 10.10.10.0 255.255.255.240
object network NETWORK_OBJ_192.168.1.128_27
subnet 192.168.1.128 255.255.255.224
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object network NETWORK_OBJ_192.168.254.0_28
subnet 192.168.254.0 255.255.255.240
object network dmz-ftpserver
host 192.168.2.101
description FTP server Host Object
object network dmz-webserver
host 192.168.2.100
description Web Server Host Object
object network ftp-server
object service FTP
service tcp source eq ftp
object service WWW
service tcp source eq www
object network DMZ.net
subnet 192.168.2.0 255.255.255.0
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group network NET-VPNPOOL
network-object 86.62.136.0 255.255.255.0
access-list outside_access_in extended permit tcp any host 192.168.2.101 eq ftp
access-list outside_access_in extended permit tcp any host 192.168.2.100 eq www
access-list VPN-FOO_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list inside_access_dmz extended permit tcp any object DMZ.net range 1 65535
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu DMZ 1500
ip local pool VPN-Pool 192.168.254.1-192.168.254.10 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (DMZ,outside) source static dmz-webserver interface service WWW WWW
nat (DMZ,outside) source static dmz-ftpserver interface service FTP FTP
nat (inside,outside) source static any any destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
nat (inside,outside) source static any any destination static NETWORK_OBJ_192.168.1.128_27 NETWORK_OBJ_192.168.1.128_27 no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_192.168.254.0_28 NETWORK_OBJ_192.168.254.0_28 no-proxy-arp route-lookup
nat (outside,outside) source dynamic NET-VPNPOOL interface
object network obj_any
nat (inside,outside) dynamic interface
object network inside-net
nat (inside,outside) dynamic interface
object network DMZ.net
nat (DMZ,outside) dynamic interface
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 86.62.136.44 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
aaa authorization command LOCAL
aaa authorization exec authentication-server
http server enable
http 192.168.1.0 255.255.255.0 inside
http 192.168.1.1 255.255.255.255 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
    308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
    0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
    30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
    13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
    0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
    20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
    65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
    65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
    30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
    30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
    496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
    74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
    68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
    3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
    63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
    0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
    a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
    9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
    7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
    15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
    63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
    18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
    4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
    81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
    db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
    7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
    ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
    45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
    2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
    1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
    03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
    69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
    02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
    6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
    c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
    69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
    1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
    551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
    1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
    2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
    4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
    b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
    6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
    481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
    b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
    5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
    6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
    6c2527b9 deb78458 c61f381e a4c4cb66
quit
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 30
console timeout 0
management-access inside
no vpn-addr-assign aaa
no vpn-addr-assign dhcp
dhcpd domain inside-sport.no
dhcpd auto_config outside
dhcpd address 192.168.1.20-192.168.1.49 inside
dhcpd dns 192.168.1.11 192.168.1.12 interface inside
dhcpd domain inside-sport.no interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp authenticate
ntp server 193.150.22.7 source outside
webvpn
group-policy VPN-FOO internal
group-policy VPN-FOO attributes
dns-server value 192.168.1.11 193.75.75.193
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value VPN-FOO_splitTunnelAcl
default-domain value inside-sport.no
username polkadott password 12332131 encrypted privilege 15
username afrocircus password 123132 encrypted privilege 15
username foobar password sdafsdfsda encrypted
username foobar attributes
service-type remote-access
username barfoo password 1313131 encrypted privilege 0
username barfoo attributes
service-type remote-access
tunnel-group VPN-FOO type remote-access
tunnel-group VPN-FOO general-attributes
address-pool VPN-Pool
default-group-policy VPN-FOO
tunnel-group VPN-FOO ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:f3b732b91e291d6ad7ae12aaa271b31b
: end
no asdm history enable
Output of show version
Cisco Adaptive Security Appliance Software Version 8.4(2)
Device Manager Version 6.4(5)
Compiled on Wed 15-Jun-11 18:17 by builders
System image file is "disk0:/asa842-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 230 days 23 hours
Hardware:   ASA5505, 512 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
                             Boot microcode        : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode     : CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode       : CNlite-MC-IPSECm-MAIN-2.06
                             Number of accelerators: 1
0: Int: Internal-Data0/0    : address is ccef.4892.00b0, irq 11
1: Ext: Ethernet0/0         : address is ccef.4892.00a8, irq 255
2: Ext: Ethernet0/1         : address is ccef.4892.00a9, irq 255
3: Ext: Ethernet0/2         : address is ccef.4892.00aa, irq 255
4: Ext: Ethernet0/3         : address is ccef.4892.00ab, irq 255
5: Ext: Ethernet0/4         : address is ccef.4892.00ac, irq 255
6: Ext: Ethernet0/5         : address is ccef.4892.00ad, irq 255
7: Ext: Ethernet0/6         : address is ccef.4892.00ae, irq 255
8: Ext: Ethernet0/7         : address is ccef.4892.00af, irq 255
9: Int: Internal-Data0/1    : address is 0000.0003.0002, irq 255
10: Int: Not used            : irq 255
11: Int: Not used            : irq 255
Licensed features for this platform:
Maximum Physical Interfaces       : 8              perpetual
VLANs                             : 3              DMZ Restricted
Dual ISPs                         : Disabled       perpetual
VLAN Trunk Ports                  : 0              perpetual
Inside Hosts                      : 10             perpetual
Failover                          : Disabled       perpetual
VPN-DES                           : Enabled        perpetual
VPN-3DES-AES                      : Enabled        perpetual
AnyConnect Premium Peers          : 2              perpetual
AnyConnect Essentials             : Disabled       perpetual
Other VPN Peers                   : 10             perpetual
Total VPN Peers                   : 25             perpetual
Shared License                    : Disabled       perpetual
AnyConnect for Mobile             : Disabled       perpetual
AnyConnect for Cisco VPN Phone    : Disabled       perpetual
Advanced Endpoint Assessment      : Disabled       perpetual
UC Phone Proxy Sessions           : 2              perpetual
Total UC Proxy Sessions           : 2              perpetual
Botnet Traffic Filter             : Disabled       perpetual
Intercompany Media Engine         : Disabled       perpetual
This platform has a Base license.

I did a wget to www.digi.no and in the capture I am seeing this:
5965: 11:47:13.287948 802.1Q vlan#1 P0 192.168.1.22.56369 > 74.125.143.109.993: . ack 4203439682 win 331
5966: 11:47:13.289779 802.1Q vlan#1 P0 192.168.1.22.33903 > 81.27.47.164.143: P 1147057306:1147057319(13) ack 4094693130 win 331
5967: 11:47:13.317488 802.1Q vlan#1 P0 81.27.47.164.143 > 192.168.1.22.33903: P 4094693130:4094693156(26) ack 1147057319 win 91
5968: 11:47:13.317717 802.1Q vlan#1 P0 192.168.1.22.33903 > 81.27.47.164.143: . ack 4094693156 win 331
5969: 11:47:13.335660 802.1Q vlan#1 P0 192.168.1.22.33905 > 81.27.47.164.143: P 1946962938:1946962951(13) ack 3747978698 win 190
5970: 11:47:13.362942 802.1Q vlan#1 P0 81.27.47.164.143 > 192.168.1.22.33905: P 3747978698:3747978724(26) ack 1946962951 win 91
5971: 11:47:13.363094 802.1Q vlan#1 P0 192.168.1.22.33905 > 81.27.47.164.143: . ack 3747978724 win 190
5972: 11:47:13.387751 802.1Q vlan#1 P0 192.168.1.22.46864 > 192.168.1.1.22: P 3937008649:3937008697(48) ack 2079733693 win 65535
5973: 11:47:13.387827 802.1Q vlan#1 P0 192.168.1.1.22 > 192.168.1.22.46864: . ack 3937008697 win 32768
5974: 11:47:13.388987 802.1Q vlan#1 P0 192.168.1.1.22 > 192.168.1.22.46864: P 2079733693:2079733741(48) ack 3937008697 win 32768
5975: 11:47:13.391062 802.1Q vlan#1 P0 192.168.1.22.46864 > 192.168.1.1.22: . ack 2079733741 win 65535
5976: 11:47:13.391916 802.1Q vlan#1 P0 192.168.1.1.22 > 192.168.1.22.46864: P 2079733741:2079733789(48) ack 3937008697 win 32768
5977: 11:47:13.392618 802.1Q vlan#1 P0 192.168.1.1.22 > 192.168.1.22.46864: P 2079733789:2079733853(64) ack 3937008697 win 32768
5978: 11:47:13.392664 802.1Q vlan#1 P0 192.168.1.22.46864 > 192.168.1.1.22: . ack 2079733789 win 65535
Some more setup.
In the host server that runs some guest virtual box virtual servers I have this route.
route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0
192.168.254.0   192.168.1.1     255.255.255.0   UG    0      0        0 eth0
192.168.2.0     0.0.0.0         255.255.254.0   U     0      0        0 eth1
0.0.0.0         192.168.2.1     0.0.0.0         UG    0      0        0 eth1
where 192.168.2.1 is the IP for the DMZ
On the two DNS-servers I have, the routing table looks like this:
routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0
0.0.0.0         192.168.1.1     0.0.0.0         UG    100    0        0 eth0

Similar Messages

Can only connect to HTTPS (secure) sites and can't connect to HTTP sites

In short I CAN ONLY connect to HTTPS sites, meaning secure.
I've narrowed this down to an issue regrading my mac book pro and the wireless router.
Router:
- not sure of the make model
- other computers CAN connect to this router and go online
My Mac:
- Mac Book Pro
- OS X 10.6
- I can connect to other wireless networks just fine
- I can surf the web for about 10 minutes or so then it blocks ALL http traffic
and i'm only allowed to https sites
going to a http site results in a "page is taking to long to respond"
please anything?

The router is a Verizon MI424WR
hope that helps, but i doubt it will...
just to also clairfy http sites either go really slow then time out only never to come back, https are blazing fast

How can I connect to a windows server from a mac book pro

How can I connect to a windows server from a mac book pre?

I have a Dell Power Edge T110 ii in the office that has files and software I need to access when away from the office, when I am on the road I use a mac book pro and an iPad.
I am sorry if I am being a bit vague but this is all new to me, I have tried 3 IT guys but they can not find a way.
Any help is greatly appeciated.

Can't connect to my VPN server from the WAN addres...

I've setup a PPTP VPN server on a Raspberry Pi, so that I can connect to it when out and about and avoid having my android internet use sniffed by random public wi-fi hotspots.
It seems to be working as I setup a Windows 7 connection to it using the LAN address (192.168.1.85) and that connected fine but I can't get it to work through the BT HH3 via the WAN address. I've forwarded port 1723 to 192.168.1.85 and tried disabling the firewall, enabling port clamping and putting the RPi in the DMZ, none of which made any difference.
Is anyone able to help please?

Did some testing from my parents house yesterday and whilst connected to their router (Virgin Media) and/or a local BTWiFi hotspot (I can't honestly remember if I tried both or if I only tested with one or the other), I was able to connect to the VPN Server from my phone.
I can also connect from my home PC using Putty to the VPN Server on SSH (port 22) with that forwarded in the router using the WAN address, so NAT travesal doesn't seem to be an issue.
Yet I still can't connect to the VPN Server from home, whether connected to my HH3 or a local BTWiFI-with-FON hotspot, using the WAN address, only the LAN address, which doesn't make any sense to me.
I don't think it's relevant to this problem but I want to ask a question about the router firewall as the description for Default (which is what I have enabled) says "Allow all outgoing connections and block all unsolicited incoming traffic. Games and application sharing is allowed." but it doesn't appear to block unsolicited incoming traffic as otherwise I don't think I'd have been able to connect to the VPN Server from my parent's house, or on SSH from my PC using the WAN address. So is the description incorrect?

How can I remove 'Open all in tabs' from my bookmarks?

How can I remove 'Open all in tabs' from my bookmarks? It's very annoying when you click on it by error. I downgraded from 29 to 28 because of the various bookmark issues I was having. I never had this issue with previous version of FF, why did they have to mess with stuff that was working.
I love the new layout. Thanks

Firefox 28 contains security vulnerabilities. It's best to start a new thread (ask a new question) about the other issues you're having with Firefox 29 and resolve them.
* https://www.mozilla.org/security/known-vulnerabilities/firefox.html
# Install Stylish and restart Firefox when prompted.
#* https://addons.mozilla.org/firefox/addon/stylish/
# Open the Add-ons Manager (Ctrl+Shift+A).
# Click User Styles on the left.
# Click the Write New Style button at the top. Paste the following in the text box, give the style a name, then click the Save button.
<pre><nowiki>
@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
#BMB_bookmarksPopup .openintabs-menuitem,
#bookmarksMenuPopup .openintabs-menuitem {
display: none !important;
</nowiki></pre>
If you don't want to install an add-on, you can use the ''userChrome.css'' file instead, but I don't recommend it.
* http://kb.mozillazine.org/UserChrome.css

My iphone storage is full due to my large photo library. As I want to go on taking more photos, if I back up my phone to icloud, can I then delete all my photos from my iphone to make room for new photos?

My iphone storage is full due to my large photo library. As I want to go on taking more photos, if I back up my phone to icloud, can I then delete all my photos from my iphone to make room for new photos? Or will the next time I back up lose all those previously backed up as it is a 'new' set of data?
I just want to find the easiest and safest way of not losing all my photos while being able to take more than my iPhones storage worth as it is already full - can someone help me please? I thought icloud was the solution to not uploading my photos to the mac but I'm not sure if the way it's going is working and don't want to delete photos or lose my phone and then find out what I'm doing isn't actually storing my photos permanently. Thanks

Hey EmilyEliza,
As you are clearly aware, it is important for you to have backups of your important data, including all of these photos you are currently keeping on your iPhone. While it is possible to use iTunes or iCloud to do backups of your iPhone, the problem becomes how to access those backups if you have deleted the photos from your iPhone. Once you have done the backup and then removed the photos from the iPhone, the only way to access the photos is by restoring the backups to the phone. See this article for information about backups made from the iPhone -
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
If you want to easily access the photos once they are off of the iPhone, another approach to this would be to import your photos from the iPhone into an application on your Mac, such as iPhoto. To learn how to do this, use the steps in this article -
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support
Once those photos are on your computer, it is still important to back up those photos to somewhere else, so you can be sure of their safety before removing them from the iPhone. Your Mac’s Time Machine application is one method of doing this -
Mac Basics: Time Machine backs up your Mac - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

Can't connect to SQL Server 2000 from serlet

Hi,
I can connect to SQL Server 2000 from standalone program after set the classpath properly.
but I Can't connect to SQL Server 2000 from serlet, I am using Tomcat 4.1 and Win2K pro now. Do I need to set something for servlet just like CLASSPATH?
Any help will be appreciated.
package usingjsp;
import java.io.*;
import java.sql.*;
import javax.servlet.*;
public class JDBCServlet extends GenericServlet
protected Connection conn;
public void init()
try
// Make sure the JdbcOdbcDriver class is loaded
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
// Try to connect to a database via ODBC
conn = DriverManager.getConnection(
"jdbc:microsoft:sqlserver://hu:1433", "sa","");
catch (Exception exc)
// If there's an error, use the servlet logging API
getServletContext().log(
"Error making JDBC connection: ", exc);
public void service(ServletRequest request, ServletResponse response)
throws java.io.IOException
response.setContentType("text/html");
PrintWriter out = response.getWriter();
out.println("<HTML>");
out.println("<BODY>");
out.println("<PRE>");
out.println("The JDBC connection is:");
out.println(conn);
out.println("</PRE>");
out.println("</BODY>");
out.println("</HTML>");

i also have this problem..do u have any solution?

TS1363 I can't connect to the itunes store from my Windows Vista PC. I have run diagnostics and itunes have verified my internet connection as positive, but not the secure link to the itunes store. This comes up as failed. Any suggestions?

I can't connect to the itunes store from my Windows Vista PC. I have run diagnostics and itunes have verified my internet connection as positive, but not the secure link to the itunes store. This comes up as failed. Any suggestions?

everytime I try to open the store it endlessly says "accessing iTunes store" but it never opens.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

How can I globally mark all sites unvisited?

How can I globally mark all sites unvisited in Firefox 4?
I am familiar with extension Link Visitor, but it only marks the links on the current page as unvisited (with click in that command). There is no option in it to see links on subsequent pages as unvisited.
Also, I don't want this function to delete site history. Any way to do this? Anybody want to write an extension with a visible button to do this!

At startup, Firefox will check this registry key for externally installed extensions:
(64-bit Windows)
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Mozilla\Firefox\Extensions
However, in recent versions of Firefox, the user may need to approve extensions to run when discovered this way...

Find the names of all open forms from inside a PJC

Hi,
is it possible to find the names of all open forms from inside a PJC (pluggable java bean)?
I have tried the window bean but it retrieves currently open windows and reads the title of each window, but what i need is to find the form name not the window title.
oracle forms version: 10g
Thank you
Edited by: user542352 on Jun 26, 2009 1:07 AM

You don't need to know names of all open forms to close them.
Try to do someting like this :
When you need to close all forms, set some global variable flag and call exit_form
in WHEN-WINDOW-ACTIVATED of each form check your global flag and if set, also exit_form.

Can't connect to a site - all other sites working fine

Bizarre problem here: I can't connect to one particular site from my iMac. I have a WiFi network, using an Apple Airport Express. I can connect to this same site from my MacBook, connected to the same WiFi network.
Has any one encoutered this same problem before?

Have you tried resetting Safari or clearing the cache (vs a full reset)? The command is in the Safari menu. My wife's PC sometimes has a similar problem with IE occasionally and requires the cache to emptied to fix it.

I can't connect to the itunes store from my iMac...But can from all other devices?? Any ideas?

When trying to connect to the itunes store from my imac it says unable to connect to the itunes store at this time...please try again later. Has been for 2 days now. I'm able to connect from all other devices, just not our imac. Any suggestions??

Hi there Kevdog,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
-Griff W.

VPN users can't connect to a Site-To-Site branch office

I have an asa 5510 that allows people to VPN into it. they get a private IP address of 10.1.4.x when they connect.
All of my sites (subnets) that are on my MPLS network were always accessible from a vpn connection.
these include the subnets
192.168.0.x (NY)
192.168.2.x (Main Office)
192.168.3.x (Main Office)
192.168.10.x (IN)
192.168.20.x (GA)
etc..
recently we converted our NY office from MPLS to a Cable Connection and added a ASA5505 for a site to site tunnel.
all of the networks in every site are able to connect to the new NY Configuration without issue.
the only issue I have is when someone VPN's into our network from home, they can no longer access the NY site.
if I try to ping anything in the NY office from a VPN connection I get this:
5
Mar 08 2013
16:22:49
192.168.0.4
Asymmetric NAT rules matched for forward and reverse flows; Connection for icmp src fiber:10.1.4.32(LOCAL\user) dst fiber:192.168.0.4 (type 8, code 0) denied due to NAT reverse path failure
I'm not sure what I need to do to get this working, so any help would be appreciated.
Thanks,
Lee

Hello Lee,
make sure you add a line in the crypto ACL of the 2 ASAs of the L2L tunnel to allow traffic between the VPN pool and the NY subnet.
make sure you add the NY subnet in the split tunnel ACL if you are using split tunneling for the VPN clients.
and make sure you have the correct NAT rules to allow communication between the 2 subnets.
also, make sure that you have the same-security-traffic command as Jay advised.
Regards,
Othman

Advice please! Installed Leopard update...now can't connect to certain site

Hi and thanks in advance for any help.
I updated Leopard (10.5.3) and Safari (3.1.1) with the apple patch a couple of days ago. After install, my MBP wouldn't connect to certain sites like Google or Yahoo. This happens for Safari, Firefox, and IE. Today, Google works but not GMAIL. The other sites remain inaccessible; I get the message "can't open page _ because it can't find the server _"
After the install and restart, I didn't change anything.
There are no firewalls in place.
I tried using openDNS and configuring the IP addresses.
Rebooted the MBP and the Router and AirPort Extreme.
Moved the System Config folder to the desktop and starting the browsers.
Also, my Mail can't access my GMail account.
Nothing has worked and I'm near my wits end.
I have a PC desktop that connects fine to everything so I don't think it's my ISP or the router.
I'm hoping for some help here in lieu of subjecting myself to phone **** or driving all the way to the Apple store.

Hi
Welcome to Apple Discussions
Seems like you covered most bases.
Rebooted the MBP and the Router and AirPort Extreme
If you didn't do so, unplug the router and AE. Wait about a minute, then plug-in again. Try Safari or another browser again. If no go I suggest reapplying the 10.5.3 Combo Update. Do not use the computer during the Install. Also, plug in the laptop.
When complete, "repair permissions" using Disk Utility in your Utilities folder.
Post back

Can't Connect To Certain Sites iPod Touch 2nd Gen

Hello.
I have an iPod Touch 2nd Generation, and I use an Arris modem to connect to the Internet. I do not have a router.
I've recently moved to a new location. I had to switch to a different ISP and modem. The internet has been working completely fine on all of my devices connected to the modem wirelessly except for my iPod Touch.
The best way I can describe the problem is: I cannot connect to certain sites. Due to Apple's complete abandonment of the older iPod Touch generations, I don't use it for anything but Facebook for when I am home and don't want to be sitting at the computer. That being said, there are only 3 sites I can report not working. Google, YouTube and Facebook all don't work for me. However, I have on rare occasion actually been able to connect to Google even though I haven't changed any settings. I can confirm that Reddit and Yahoo do work. I haven't tried other sites. The message I get when I try to connect to these sites is, "Safari could not open the page because the server stopped responding."
The steps I have taken so far (that I can remember) in hopes of fixing this problem are listed below:
Restored my iPod via iTunes to factory settings.
Restored my iPod to previously backed up data.
Reset network settings in iPod settings.
Disconnected and reconnected to modem wireless signal.
Turned off iPod and held down Home and Power button for 10 seconds or so.
Downloaded Facebook Messenger app to attempt to log in that way (did not work).
Reset modem.
Probably some other things too.
I would appreciate any help you fine folks over here could provide as I have no other options to turn to.
Thanks a lot.

Unfortunately, I have no other available networks to test it on. I can say that it was working before I moved. I can connect to the sites completely fine on all other devices connected to the same network. Unless there is some setting on the modem that specifically stops only my iPod Touch I figured it was something on the iPod causing the problem.

Can't connect to all sites outside from inside

Similar Messages

Maybe you are looking for