Can't connect via ethernet after iBook wakes up from sleep

I'm running 10.4.0 on a 1.33 GHz G4 iBook. Since buying the computer in 2005, I've been connecting to the internet in various locations via AirPort, though I have hooked my iBook up to ethernet connections in the past and had no problems.
Recently I moved to a university where I must connect via ethernet, as the wireless network doesn't extend to the areas where I do most of my work. I bought a new cable. Much of the time, my connection is fine. But frequently I am unable to connect to the internet at all via ethernet, and I've noticed that it's always after I've woken the computer up from sleep. I've tried various ridiculous "kick the car and maybe it will start" techniques like unplugging the cable at both ends and waiting, restarting five or six times in a row, etc., and it starts connecting eventually, but I have NO idea why or why not. When I check my network preferences, I get the message "Built-in Ethernet is currently active and has the IP address [xxx.xxx.x.xxx]. You are connected to the Internet via Built-In Ethernet." But I'm not. What's going on here?

Sorry, meant to indicate an IP address without giving the exact numbers, and it came up as an HTTP address. My network connections system preference panel indicates a normal IP address. (And it's not self-assigned.)

Similar Messages

Internet connection not working after computer wakes up from sleep. OSX Lion

After upgrading to Lion, I noticed that my internet connection doesn't work when I wake my computer from sleep. I have to turn off the WiFi connection, turn it back on and it will work. I guess this is a glitch that will be fixed later on. Just wanted to point it out. I don't know if someone else is having the same problem? I am not very happy with the upgrade to Lion, things seem to be slower, I've had several freezes requiring to reboot. I guess Lion needed a little more twicking before release. Not worth the $29.99 price tag.

I had this problem on SL and on Lion as well, and it occures for WiFi and Ethernet connections.
In fact the internet connection was not broken as I could ping the destination usin the IP (not DNS name).
In this case the problem was related to mDNSResponder task which handles all dns queries.
It was the most frequent problem in my day to day work with SL and now Lion. It was never fixed by any patch from Apple. I tried almost all voodoo including fresh install, all possible config changes - no solution.
The only version with no problems related to network was 10.5.8. All the other versions had issues of different kind (WiFi instability (lost signal), DNS problems (for wireless and wired connection) sometimes associated with machine sleep and wake up and sometimes with no reason.
QUESTION: Is your problem independent of the access point / router you connect to.
I must say networking was (and still is) the weakest part, besides the other OS X weaknesses I experienced during 4 years of OS X usage.
No problems in the same network with Linux or Windows beeing ran natively on my iMac So hardware is OK.
Software is of poor quality. Not much more to say in this matter.
I found a very interesting article dated 1996 about programming which I think is still valid.
Link to the article: http://www.fastcompany.com/magazine/06/writestuff.html
Below the fragment (with some connection to Apple)
Software is everything. It also s***s.
"It's like pre-Sumerian civilization," says Brad Cox, who wrote the software for Steve Jobs NeXT computer and is a professor at George Mason University. "The way we build software is in the hunter-gatherer stage."

Officejet 6500A Plus E 710n. Can I connect Via Ethernet & WIFI SIMULTEANOUSLY?

Officejet 6500A Plus w/ Windows XP on Desktop, Windows7 on Laptop. Can I connect Via Ethernet & WIFI SIMULTEANOUSLY?

No. You can have one or the other. How the printer connects does not have to match how the computers connect.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

IBook G4 Can't connect via Ethernet?

While we were away lightning took out several devices. Among them was the Airport Extreme Base Station and the cable modem. The modem has been replaced. I have an iMacG5 and an iBookG4 both running 10.4.11. The iMac can establish a connection via Ethernet (all this happened yesterday so I have yet to replace the Airport). The laptop apparently won't accept an IP address from the router/modem and won't connect to the internet.
I did see a message saying that my network settings had been changed by another application but don't know if this figures in the mix.
Anyone have any ideas how I ought to approach getting the iBook back online?

I did see a message saying that my network settings had been changed by another application but don't know if this figures in the mix.
Anyone have any ideas how I ought to approach getting the iBook back online?
I think you ran across the security update bug in 10.4.11 the deals with an ethernet connection. Here is the workaround:
http://discussions.apple.com/message.jspa?messageID=8185915#8185915
Here is more of the story:
http://discussions.apple.com/thread.jspa?threadID=1730909&tstart=0

Powerbook G4 can't connect via ethernet but connects via airport

We have a small office network connected to an Efficient Networks DSL router that's managed by our isp. The router has 4 ports and a linksys 8 port switch is connected to one of those ports. Another D-Link wireless router/switch is connected to another port.
2 i-macs connect without problem via ethernet cable. They are set to DHCP and get 192.xx private addresses. Both run 10.4.5. Another older imac running 9.2.2. also has no problems.
I recently purchased a powerbook G4 and it will not connect via ethernet to the Efficient networks router. At first it was connected to the linksys, so decided to connect it direct to the Efficient Networks router. With DHCP, it acquires a 169. internet address which is self generated (i.e. no real connection). I tried to give it a static private address (talking to the isp provider). They could see the powerbook but saw all zero's (presumable mac address). By the way the Powerbook works perfectly at home connected via ethernet cable to a D-Link router connected to a cable modem so it's not a physical problem. I even checked the ethernet cable I used in the office with another computer - no problem.
When I switch to airport in the office, the powerbook connects to the network and the internet. I get some strange warning messages showing the server's and the router's private ip addresses. I click ok, and the powerbook finds an unassigned private ip address. It's the only way it will work, but it causes problems, because I can't connect to one of the network printers. Speed also isn't great.
Can anyone give me advise how to proceed. I am no expert on this stuff so keep it as simple as possible.
Tks

Tim,
Thanks for your help. Here's what I've done before reading your e-mail. The D-Link DI-524 wireless router is connected to the Effiicent Neworks DSL router as you mentioned. One ethernet port of the EFF.Net. router is connected to the WAN port of the DI-514.
Because I have a D-Link router at home which works flawlessly with my powerbook, I decided to connect the ethernet cable of the powerbook to the D-Link which has 4 ethernet ports. Lo and behold, the powerbook acquired a private ip address and connected to the LAN and internet!
When I connected the powerbook direct to the Efficient Networks router, it could not communicate. I believe that there must be some software incompatibility between the powerbook and the Efficient Networks router. By connecting to the D-Link, the D-Link assigned an ip address to the powerbook, and it could connect to the server, lan, etc..
Only problem is that I have a Brother network printer that cannot connect to the powerbook. My powerbook cannot find it on the network. Because there is a linksys switch connected to the efficient networks router's third ethernet port, maybe as you said, going through the D-Link via DHCP (when the Linksys is also acting as a DHCP server, might cause this type of problem. What do you think?
As a final note, other imac G5's connected to the linksys switch (which then connects to the Efficient Network's router) have no problem connecting to the lan or internet and have no problem connecting to any of the printers. When I put the powerbook on that switch, I could not connect to the internet - i.e. whether connecting via the lynksys switch or direct with the efficient networks router - same results: no internet connection whether manually or via DHCP.
So the imac G5 has no problem with the efficient networks router but the powerbook G4 hits a brick wall. The G4 likes the D-Link router. I am concerned (and I will have to check this) that if I turn off the dhcp server feature from the D-Link, that whatever software issue crops up between the powerbook and the Efficient Networks router, will rise up again, because the D-Link will act like a simple switch (just like my linksys switch), and we'll be back to square zero. In any case, no harm in trying. This may be the cause of the Powerbook not seeing that Brother printer (even though it sees another printer and other macs).
Having spent hours reading about network problems, I think it's safe to say that macs have problems with certain routers. Why a G5 works and a powerbook G4 doesn't is beyond me, but clearly software must play a role.

Self-assigned IP !!! Can't connect via Ethernet

Hi all,
This is my problem:
- Now every time I connect my MBP (running 10.6.4) to my hall's network (staying on campus, in uni) it appears as "Self-assigned IP" and cannot connect to the internet for the Ethernet. It suddenly happened a few days ago and I have no clue what caused that
- Airport's working well
- Using Windows on Parallels and can still connect to the Internet despite that the Mac OS X does not at the same time, my friends' laptops have no problems as well
- Tried taking the IP, subnet mask, router( I suppose in Windows it is called Gateway ) details and typing in manually for the Ethernet settings on OSX but still cannot connect to the Internet. The status is Connected and "Ethernet is currently active and has the IP address 137.xxx.xx.xx."
- When I bring my laptop to a different place and connect via Ethernet, it works well, too, I just leave the setting to be "Using DHCP"
I've seen that lots of people have met this issue, also loads of advices have been given:
- reset the router ... --> I'm connecting to the hall's network, so that's impossible for me to do
- sudo ipfw list , sudo ipfw flush .. --> nothing changed afterwards
- someone suggested uninstalling any VMware --> tried uninstalling parallels desktop and the problem's still there
- untick the "Use Passive FTP Mode" for ethernet --> no difference
- Security settings ,Firewall --> firewall was even off when the issue 1st appeared
So ANY SUGGESTIONS PLEAAASSSSSSSSSEE !!!! I'm sick of having to turn to Windows just to access the internet
Thanks in advance

fr1d4y13 wrote:
Apart from this one "*4) In the folder /Library/Preferences (not <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.* " , I've tried all the other ways suggested but didn't work.
I'm wondering what it means by "move" here :? Is that "copying and then delete the original" :??
A "move" operation is normally considered equivalent to (although more efficient) than "copying and delete the original". Just drag the folder out of its original folder and onto the Desktop, which will make it be no longer in its original folder.
I've seen others post advice about moving out specific files in that folder. That probably works just as well if not better (as it leaves in place other files not involved in networking), but I haven't spent the time to determine just which files should be moved.

Can't Connect Via Ethernet on new MacBook Pro

Hello,
I'm running into a frustrating problem and hoping someone can help.
I have a new MacBook Pro that won't connect via Ethernet. My old computer (Powerbook G4) with the same settings works flawlessly.
Details: under Network Settings I have Automatic/Using DHCP. When I click on Assist Me>Diagnostics, I get green lights all the way down (Built-In Ethernet, Network Settings, ISP, Internet, Server). The Diagnostics tool therefore proudly announces that my Internet connection is working correctly.
When I open Safari, however, it won't open any page. Using Ping I also get no responses.
When I plug the exact same ethernet cable into my Powerbook G4, everything works flawlessly. The only difference is that the IP address ends in .25 instead of .30 (I assume that's from the router assigning different IP addresses to the two computers.)
On another forum i read about someone having a problem with a long/lossy ethernet cable, but I just took my computer to the router and tried with a 2-foot ethernet cable. Same situation.
Help!
Thanks

i rebooted the firewall and it worked.

Wireless not working after laptop wakes up from sleep mode

After my laptop wakes up from sleep, the wireless network stops. Even when the wireless is enabled, it is unable to scan the wireless networks. In order to make it working again, I have to restart my laptop. Here are some of the details that might be useful.
%lspci | grep Network
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
%rfkill list all
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
%iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
%iwlist wlan0 scan
wlan0 no scan results
%ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
ether e0:cb:4e:fe:e2:00 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 45
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436 metric 1
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 336 bytes 26572 (25.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 336 bytes 26572 (25.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 metric 1
ether 1c:4b:d6:75:ae:67 txqueuelen 1000 (Ethernet)
RX packets 22619 bytes 27403217 (26.1 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 22393 bytes 2574830 (2.4 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
/var/log/messages.log: (from the point where the laptop goes to sleep and wakes up)
Dec 9 12:28:12 localhost NetworkManager[745]: <info> (wlan0): now unmanaged
Dec 9 12:28:12 localhost NetworkManager[745]: <info> (wlan0): device state change: activated -> unmanaged (reason 'sleeping') [100 10 37]
Dec 9 12:28:12 localhost NetworkManager[745]: <info> (wlan0): deactivating device (reason 'sleeping') [37]
Dec 9 12:28:12 localhost dhcpcd[1927]: wlan0: removing interface
Dec 9 12:28:12 localhost NetworkManager[745]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 1927
Dec 9 12:28:12 localhost NetworkManager[745]: <info> (wlan0): cleaning up...
Dec 9 12:28:12 localhost NetworkManager[745]: <info> (wlan0): taking down device.
Dec 9 12:28:13 localhost NetworkManager[745]: <warn> (pid 1927) unhandled DHCP event for interface wlan0
Dec 9 12:28:25 localhost NetworkManager[745]: <info> (wlan0): now managed
Dec 9 12:28:25 localhost NetworkManager[745]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Dec 9 12:28:25 localhost NetworkManager[745]: <info> (wlan0): bringing up device.
Dec 9 12:28:25 localhost NetworkManager[745]: <info> (wlan0): preparing device.
Dec 9 12:28:25 localhost NetworkManager[745]: <info> (wlan0): deactivating device (reason 'managed') [2]
Dec 9 12:28:25 localhost kernel: [ 3612.851109] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Dec 9 12:28:25 localhost NetworkManager[745]: <info> (wlan0): supplicant interface state: starting -> ready
Dec 9 12:28:25 localhost NetworkManager[745]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
Dec 9 12:28:25 localhost NetworkManager[745]: <info> (wlan0): supplicant interface state: ready -> inactive
%uname -r
3.1.4-1-ARCH
%uname -m
x86_64
I want to know what is going wrong here. Any help/suggestions will be useful.
Last edited by geeky_sh (2011-12-09 07:27:37)

Well, the above two links have the problem similar to mine but not exactly. In first one there is a problem with network manager - that it is unable to restart after coming from sleep mode while that is not a problem in my case and I tried all the solutions provided in the second link, but didn't work.
What I figured is when I execute '#pm-suspend' and then close the lid. Then, after I open the lid I wireless works fine. 'pm-suspend' is not invoked if I close the lid. So I needed to invoke the above command when an acpi event is generated when I close the lid. So here is what I added in the /etc/acpi/handler.sh file
button/lid)
case "$3" in
close)
(sudo /usr/sbin/pm-suspend) #added
open)
This works fine for now. Still, I don't know why this solution works - Why executing pm-suspend solves my problem?

Can't connect via aiport after using AOL connect w/modem

When we went to visit family over the holidays, we had to connect to the internet via AOL connect. But now that we're back home, I can't get my husband's iBook G4 to connect to our wireless network. When I look at the network status, it says that AirPort is connected, but has a self-assigned IP address & may not be able to connect.
I have restarted my Airport Extreme base and cable modem several times. I am not having this problem on my MacBook Pro (which used an external modem, btw). I have tried deleting my internet preferences, but that hasn't helped.
I can't find a way to delete the IP address. Is that in the iBook's settings, or the Airport base settings?

Try this on the iBook ...
o System Preferences > Network > Show > Network Port Configurations
o Note the order of the ports that are listed.
o If it is not already, verify that AirPort is checked and that it is at the top of the list.

Can't connect via Ethernet

I have an iMac G5 iSight and have been using Airport successfully to connect to the Internet via a DW6000 satellite modem. Since I have now retired and will no longer be using a Powerbook, I decided to stop using Airport and attempted to connect via a hardwired cable from the iMac to the Modem. It refuses to work. The settings show that it has acquired the correct address from my provider and is properly connected to Direcway via DHCP. I have rebooted the modem and the computer, renewed the DHCP licence all to no avail. The information says that although the Ethernet port is active, it has an internal address and cannot be connected to the Internet.
By the way, I was able to connect to the Internet via Airport or Ethernet with my G4 Powerbook. But I can't do it via Ethernet with the iMac.
What can I do to get this working?
Griff

Problem resolved!
I don't know what the problem was. I just tried again. This time I did not reboot the computer. I shut down the modem, attached the Ethernet cable and fired it up again and this time I was connected!
So I really don't have an answer except that it just decided to start working.
Griff

Arg! Airport Extreme to Extreme- Can't Connect via ethernet

Hello- Arg! Frustrated and can't figure out what's going on.
Goal: Wirelessly connect an airport extreme to another airport extreme and use the 2nd Extreme as a local wired hub.
Problem: Everything works fine, but any machine that is hooked up to the 2nd extreme isn't getting a DHCP assigned and can't see it. But wireless can see it and works great.
Setup: (here goes)
- Airport extreme 1 (AE1) is hooked up to a comcast cable modem. Works great
- Airport extreme 2 (AE2) has been configured to wirelessly join AE1- This also works great.
- 2 Mac pros are connected to AE2 via ethernet cable
visual example:
(comcast) - (AE1) ~~ (AE2) - Mac pros "~" = wireless, "-" = wired
I've tried different machines and cables... no luck. If I reset AE2, they can all connect.
What am I doing wrong here... seems like ethernet is being disabled.
All AE have been updated and along with computer software. All wireless works fine.
Thanks!
Message was edited by: mr.bill

Got it... Instead of joining, I had to select extend and ensure that AE1 had extend network enabled. Seems to be working now. Sweet!

Can't connect via Ethernet to Express. Airtunes works, no ethernet though

Hi,
I'm having trouble connecting an old iMac g4 without an Airport Card to an Express over Ethernet. My Extreme is running great, the Express says it is connected to it with WPA/WPA2 (green light and all) but can't connect it over Ethernet to the iMac for whatever reason.
I'm connecting to the main base station on a MacBook just fine.
Thanks in advance to whoever can help with this

Hi,
Thanks for your response. I've found a very odd, counterituitive, shouldn't work, kind of fix. I HOPE it stays fixed...
When working in the Airport Utility, devices will not always show up. If you click in the upper right corner of your screen where the Airport signal is and select the network, you can force the utility to see it. (Think of this as the doctor saying "Nope, can't find your kidney to do surgery" and you pointing out "Hey doc it's right there!")
After a long wait, you can do the same for your Express, if it pops up in that same menu (typically with an odd number attached to it perhaps the MAC address.)
So essentially, the Airport Utility has to be kicked around a bit by the select a network menu. Odd I know. Hope this helps someone who's had similar problems.

Can't connect via outlook after remote move request.

Hi All,
i want to ask something about outlook connectivity,i was do remote move request from different forest. after move request completed, i try login the account
using ms outlook 2010. but got some error like this, "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your
folder with your outlook data file (ost)."
if i try login using OWA, its successful,
i was enable/disable MAPI from this mailbox, but not the solution. finding in google, i found this
link . but not the solution.
anyone have some experience with my trouble?.
thanks in advance.

Hi Rambosality,
According to your description, I understand that outlook cannot connect to Exchange server with error “Cannot open your default e-mail folders. You must connect to Microsoft Exchange with….” When move mailbox.
I want to double confirm some points, please help to collect answers for following question:
1. All account or some special account experience this issue?
2. How about re-create Outlook profile for test?
Please try to use Test-OutlookConnectivity and Test-OutlookWebServices test end-to-end Microsoft Outlook client connectivity, availability service and etc. More details for this command, please refer to:
http://technet.microsoft.com/en-us/library/dd638082(v=exchg.141).aspx
http://technet.microsoft.com/en-us/library/bb124509(v=exchg.141).aspx
Additional, I find an article about RPC Client Access Cross-Site Connectivity Changes. It discuss about RPCClientAccessServer setting after move mailbox cross-site, for your reference:
http://blogs.technet.com/b/exchange/archive/2012/05/30/rpc-client-access-cross-site-connectivity-changes.aspx
Best Regards,
Allen Wang

Problems connecting to Monitor after waking up MacBook from sleep

Hi,
I am experiencing a lot of problems connecting my macbook pro to external monitor once I put it to sleep. I have tried every options like setting up PRAM and all, but it just wont work. Sometimes the restart works and sometimes it wont. I am using a Samsung monitor. I have no idea what to do, as I keep on clicking Detect displays and it just wont do anything. Can anybody please help me as to how I can wake up my macbook from sleep and get it connected to the monitor. I have a mac keyboard and bluetooth mouse, but neither would wake the mac. I have change my bluetooth settings so that the mouse should be able to wake it up..

William Rivas wrote:
William Rivas wrote:
William Rivas wrote:
Linc Davis wrote:
Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. Repair permissions on the startup volume.
7. Turn off Bluetooth and test.
8. Reset the System Management Controller.
9. Reset the PRAM.
10. Reinstall OS X.
Updating to 10.9.2 did the trick. So I thought. Does anyone have a solution?
Thanks!

Many programs hanging after computer wakes up from sleep

Hi!
Since teh upgrade to Snow Leopard (10.6) I experience many hang-ups / freezes on a variety of programs. I have traved this to I think only happenening after the MacBook has been sleeping. So put to sleep, wake up again, and at least the following froze (all have latest updates installed):
- Photoshop CS4 (hangs on welcome screen saying "Measuring Memory")
- Adobe InDesign CS4 (starts, becomes sluggish, and hangs when opening files or latest when trying to close requiring force quit; then doesn't start again)
- Adobe Illustrator CS4 (opens but freezes when trying to open a file)
- iTunes (never comes up, just keeps bouncing in the dock until the cows come home)
- Aperture 2.1.4 (shows splash screen and hangs then)
All work well after a fresh boot.
However, when I then try to restart the machine, it hangs before rebooting (my desktop background is still there, all other things gone, such as dock, menu bar etc). I have to switch it off the hard way (power button 5 sec or so) and restart. Then all works well until next sleep.
If anyone has ideas how to get around this I'd love to hear the answer. If you carry the MacBook around a lot, always rebooting makes it feel worse than Windows...
Cheers,
Hendrik

Similar sort of problem. iPhone will not wake my iMac from screen save using iPhone "Remote" and when I wake my iMac manually, iTunes reports that it cannot connect to my Airport Express, which I use a remote music player. If I go into the speakers pull down at the bottom right of the iTunes screen, I can immediately reconnect to the Airport Express by manually clicking to change it from "Computer". Both the Time Capsule which sends the wireless signal to the Airport Express and the Airport Express itself are showing green lights. The Time Capsule is connected wired to my my iMac. This system all worked well on 10.5.8. I had expected it to be better in Snow Leopard with remote wake from sleep. I am also getting various random hangs after updating to 10.6.1 and HP drivers 2.1. Syslog shows this often to be TWAIN related or HP printers. Not good at the moment. Spoke to Applecare yesterday and they had no constructive suggestions other than to reformat my hard disc and start from scratch - yea right. I have reinstalled SL and reupdated with no improvement.
Wilson

Can't connect via ethernet after iBook wakes up from sleep

Similar Messages

Maybe you are looking for