Can't control the HP3325b (error code:Hex:BFFA0010)

Dear all,
i am now writing a vi to control the HP335b,
when i run a simple driver's vi (like getting started.vi) i found that the "ag3325b Configure Standard Waveform.vi" got a error and the error code is Hex:BFFA0010
ag3325b Configure Standard Waveform.viDriver Status: (Hex 0xBFFA0010) Invalid value for parameter or property.
what should i do to recover the error?
p.s.i am now using LV6.1 with visa3.0 and IVI Compliance Package 2.1 installed.
Thanks all~~

Hello MusicIsLive,
Thank you for your inquiry regarding an IVI driver for the HP335b. It sounds like you are receiving an out of range error while running the Getting Started.vi. I have tried to replicate the problem on LabVIEW 6.1 with the Getting Started.vi in simulation mode and have been unsuccessful. I assume that you are not running the driver in simulation mode but you may want to give this a try. This would ensure that all of the components of your system are configured correctly before connecting any instruments to it. Give this a try so we can start from the beginning of the problem. The help file in LabVIEW also gives some useful tips when using IVI drivers. To access this got to Help>>VI, Function, & How-To-Help, and in the Contents ta
b select Instrument Drivers.
Other resources similar to these can be found on the ni.com website by clicking the support tab at the top of the home page. Then search for �Out of Range IVI errors� from Technical Resources at the top of the page or topics similar to this. I hope these resources help. Let me know if I can further assist you.
Shea C.
Applications Engineering

Similar Messages

Can't empty the trash error code -8003

Can't empty the trash error code -8003

Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

How can i solve the constant error code 2330

My itunes stopped working when battery came out of my laptop and removed itself somehow and now everytime i try and re download it an error code 2330? It still exists in files but will not repair or let me unintall the same 2330 code appears....any ideas?

The 2330 error often means some sort of damage to the filing system as might happen if the battery fell out while the disk was in use.
Try running a disk check to see if it finds and fixes any errors.
http://support.microsoft.com/?kbid=315265

HT201210 Iphone 6 can't complete the restore error code (56)

I'm getting this msg :
The iPhone "iPhone" could not be restored. An unknown error occurred (56).
after I try all the steps in apple site to fix it but it still the same.
after searching I found it stop in the last. Failed when trying to send the baseband file.
any idea how to pass or fix this baseband file ?
Thanks.

The original post referred to a jailbroken phone, and the error is because the phone is jailbroken and probably cannot be fixed. As I've never seen that error on a phone that was not jailbroken, can I assume that yours is jailbroken also?

The operation can't be completed because one or more required items can't be found. (Error code -43)

When I attempt to add files to...or copy to the desktop of my mac, my icloud (idisk ..the blue icon on my desktop) is giving this error:
The operation can’t be completed because one or more required items can’t be found.
(Error code -43)
I've been searching for info on that error code, but I'm not find anything on (many different error codes, but not -43).

I get an error -36.
I did the dot_clean in the terminal.
Did not fix it.

I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can't be completed because one or more required items can't be found. (Error code -43). What do I do?

I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can’t be completed because one or more required items can’t be found. (Error code -43). What do I do?

Post in Microsoft's Powerpoint (Mac) message boards.

Can anyone tell me what the following error code means? 4MOT/2/40000004: BOOSTA-1235

Can anyone tell me what the following error code means? 4MOT/2/40000004: BOOSTA-1235
Fans are running permanantly and this is the error I get when running apple hardware test.

SNS is a sensor error. The sensors read actual temperatures at several points inside the Mac chassis to decide when things are heating up, and which fan or fans speed up to improve cooling.
Some of those sensrs are just a thermal-sensitive transistor mounted to a surface that conducts heat, and replacement does not run into big money. Disconnected wires are sometimes a possibility, especially if things were changed nearby, e.g., new heatsink.

Hi can someone explain what the following error code mean and how i can recifty to download a copy of ebook purchase Error getting License. License Server Communication Problem: E_ACT_NOT_READY

Hi can any one help
I keep getting the following error code when I try and down a ebook which I have purchase
Error getting License. License Server Communication Problem:
E_ACT_NOT_READY
can someone advise me what this means and how I recifty the problem to enable me to read the ebook purchase?
Thanks

I am having this exact issue. I just downloaded a book and went to open it and got this exact problem.
I purchased he book through indigo/kobo edition and paid for it and immediately went to open it and am getting the same error
Error getting License. License Server Communication Problem only mine says Bad Device key after.
Not sure why someone has not answered this question yet...i am using windows 7 and this is how i always do it. Never had this problem before when purchasing a book.
i hope someone answers this soon.

How can I control the node execution sequence?

I have invoked several nodes for controls which are to "Reinit To Dflt". How can I control the sequence of there initialization?

to ensure code (any code) is going to execute in the order you want, you can use some error cluster to controll data flow, so you need your individual code in a subVI with error in and out. Another posibility is to use sequences, but most people will say they hide code, so you can use one sequence only, and pass dummy data from one to another to ensure data flow.
Hope this helps

Crystal Server 2013: How to troubleshoot "Can not create temp file---- Error code:-2147215357"

We have a Java7 web app, which generate PDF report by calling Crystal Server 2013 SP4.
The app is being deployed on many different servers. We sometimes got the error below when generating report:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.controllerExportInternal(PrintOutputController.java:280)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:152)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:130)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:113)
Problem is, this seems to be a pretty generic exception. It could be caused by many different reasons.
e.g. network connection problem, wrong DB login, wrong folder path, lack of folder access right, etc.
Each time we could only guess what's wrong.
We are running into it again, and this time everything seems correctly configured so far.
We wonder if there are more info we can get to troubleshoot? For example, any log file of Crystal Server we should look into? Or does Crystal Server has debug mode which prints more details to tell us what goes wrong?

Prithviraj Shekhawat wrote:
Hi Henry,
I believe you are using RAS SDKs to export the reports to PDF.
Apply trace on RAS server and check what you find in RAS logs.
Check whether you can see timeout error is RAS logs. Usually if connection is lost and the RAS server no more have the session to write to the temp directory, we do see these errors.
Also, does the account that runs RAS have permissions to create a file in RAS's default temp directory? Are you getting any out of memory or out of disk space exceptions on App server or RAS, tracing RAS server is the way to move forward.
Thanks,
Prithvi
>>I believe you are using RAS SDKs to export the reports to PDF.
Yes
>>Apply trace on RAS server and check what you find in RAS logs.
>>Check whether you can see timeout error is RAS logs.
How to configure tracing, and where are RAS logs? Is it configured in CMC --> Servers --> Crystal Report Services?
>>Also, does the account that runs RAS have permissions to create
>>a file in RAS's default temp directory?
Pretty sure yes.
>> Are you getting any out of memory or out of disk space exceptions
>>on App server or RAS, tracing RAS server is the way to move forward.
Not on App server.
For RAS, that's the problem, I am not sure where to look.......

Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal

Hello,
While exporting Export reporting from BI4 getting exception
Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
In Trace Log I am getting
com.crystaldecisions.xml.serialization.XMLWriter||Failed to create an object instance for CrystalReports.TextObjectFormat
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CrystalReports.TextObjectFormat
at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
I tried following solution according to the all forums but still issue exist.
Done changes mention in KB article In <Installation-dir-of-BO>\Common\4.0\java\CRConfig.XML we have to increase the JAVA heap MIN and Max size
<JVMMaxHeap>64000000</JVMMaxHeap> <JVMMinHeap>32000000</JVMMinHeap>
Increase the value in the ReportApplicationServer Services in the CMC for "Number of database records to read when previewing or refreshing a report". The value -1 is for unlimited records but not recommended for performance.
Check for temporary read write permission on server
Using SDK library from C:\Program Files (x86)\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\java\lib
Can you please let me know is there anything missing.

Hi,
We face the same problem with some BI4 reports.
The same report works well with the "Crystal Reports Viewers API", as used in Infoview, but not with the "Report Application Server (RAS) API".
This error appears after some time working on a report. If we reproduce the same report, but from zero, no problem.
Hope it can help.
Ludovic.

How can i fix a 4280 error code when trying to burn cd's on itunes

How can I fix a 4280 error code when trying to burn cd's on itunes for windows? Model drive is drive D: TSSTcorpCDRWDVD TS-H492C

Did you by chance find out a solution with your problem? I am having the same issue with the same drive. I even uninstalled iTunes and completely reinstalled it.
Thank you for any help anyone can offer. I'm not having any luck finding answers on the net. Thx.

How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

Hey Debbiered1,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Take care,
Delgadoh

I got the Mac error code -36 while trying to move a backup file

I got the Mac error code -36 while trying to move a backup file (made by Time Machine) to another drive. The full text of the error message is:
The Finder can’t complete the operation because some data in “boot.efi” can’t be read or written. (Error code -36)

It's a disk error. Although Apple documentation says you should be able to copy Time Machine backups in the FInder, that doesn't necessarily mean it will work. I suggest that, instead of copying the existing backup, you start a new one on the other drive, and keep the old one. You need more than one backup anyway.

How can I control the size of the af:InputText?

Hi,
How can I control the size of the 'af:InputText' on the UI, without using columns & rows attributes. Even though I am using width & height attributes, the changes are not getting reflected in the UI.
Thanks,
Rajesh.

Hi,
It is inside a 'af:PanelBox'. So, the parent container also determines the size of the child? Here I need a create a 'pidgin chat window' kind of an interface with a fixed size top-level container, inside which I willl put all my components. The code looks something like this:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1" partialTriggers="it1">
<af:messages id="m4"/>
<af:form id="f1" partialTriggers="it1">
<af:panelBox text="" id="pb1" background="dark" type="stretch"
titleHalign="start" ramp="highlight"
inlineStyle="width:350pt; height:500pt; margin:0.5pt; padding:0.5pt; border-width:0.5pt; "
partialTriggers="it1">
<af:spacer height="15pt" id="s1"/>
<af:inputText id="ot1"
columns="82" rows="25" wrap="hard"
partialTriggers="it1"
value="#{ChatClientBean.chatLog}"
binding="#{ChatClientBean.outputChatTextBox}"
visible="false">
</af:inputText>
<af:spacer height="27pt"/>
<af:inputText id="it1" inlineStyle="width:200pt; height:100pt;"
valueChangeListener="#{sessionScope.ChatClientBean.sendMessage}"
autoSubmit="true" partialTriggers="it1"
binding="#{ChatClientBean.inputChatText}"/>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>
Thanks,
Rajesh.

Can't control the HP3325b (error code:Hex:BFFA0010)

Similar Messages

Maybe you are looking for