Can´t create a date attribute for basic asset

Hi
I created a basic asset where I want to have a date attribute to pick up a date for calendar.
My question is: How can I create a date attribute for a basic asset? For what I understand I have to create an element attribute in my descriptor file like this
<PROPERTY NAME="imagedate" DESCRIPTION="Image date">
<STORAGE TYPE="TIMESTAMP" LENGTH="8"/>
<INPUTFORM TYPE="ELEMENT" WIDTH="24" MAXLENGTH="48" REQUIRED="NO" DEFAULT="" INSTRUCTION="Format: yyyy-mm-dd hh:mm"/>
<SEARCHFORM DESCRIPTION="Image date" TYPE="ELEMENT" WIDTH="48" MAXLENGTH="128"/>
</PROPERTY>
Then, when I create a new instance of this asset, this attribute appears with this error:
Date: Unable to find element OpenMarket/Xcelerate/AssetType/Oportunidade/ContentForm/imagedate
But the element (imagedate.xml) is there!!
I request help.

It seems that the table does not have the entries, maybe b/c we are on R3 4.7. Could you tell me what the entries are suppossed to be to allow the Asset and Cost Center lookup? The search does work for WBS element though and I don't see anything specific to WBS element in that table. In any case if you know the entries that would be great, also this table is not modifiable via SM30, here are the entries that I have in that table.
AUF_NETNR     PLM_HELPVALUES_AUTHCHECK
BU_PARTNER     BUPA_BAPI_F4_AUTHORITY
DAENR     PLM_HELPVALUES_AUTHCHECK
DOKNR     PLM_HELPVALUES_AUTHCHECK
EQUNR     PLM_HELPVALUES_AUTHCHECK
KUNNR     PARTNER_BAPI_F4_AUTHORITY
LIFNR     PARTNER_BAPI_F4_AUTHORITY
MATNR     PLM_HELPVALUES_AUTHCHECK
NW_AUFNR     PLM_HELPVALUES_AUTHCHECK
PARNR     PARTNER_BAPI_F4_AUTHORITY
PS_POSID     PLM_HELPVALUES_AUTHCHECK
PS_PSPID     PLM_HELPVALUES_AUTHCHECK
QMNUM     PLM_HELPVALUES_AUTHCHECK
S_AGNCYNUM     INT_FLBOOK_F4_AUTHORITY
S_AIRPORT     INT_FLBOOK_F4_AUTHORITY
S_BOOK_ID     INT_FLBOOK_F4_AUTHORITY
S_CARR_ID     INT_FLBOOK_F4_AUTHORITY
S_CITY     INT_FLBOOK_F4_AUTHORITY
S_CONN_ID     INT_FLBOOK_F4_AUTHORITY
S_COUNTNUM     INT_FLBOOK_F4_AUTHORITY
S_COUNTR     INT_FLBOOK_F4_AUTHORITY
S_CUSTOMER     INT_FLBOOK_F4_AUTHORITY
S_FLCONN     INT_FLBOOK_F4_AUTHORITY
S_FLCONN1     INT_FLBOOK_F4_AUTHORITY
S_FLCONN2     INT_FLBOOK_F4_AUTHORITY
S_PLANETYE     INT_FLBOOK_F4_AUTHORITY
S_TRNUM     INT_FLBOOK_F4_AUTHORITY
TPLNR     PLM_HELPVALUES_AUTHCHECK
USCOMP     SUSR_BAPI_F4_AUTHORITY
XUBNAME     SUSR_BAPI_F4_AUTHORITY

Similar Messages

SRM 7.0 - Can't Create a shopping cart for an Asset

Hi,
I am trying to create a SC with account assignment Asset in SRM 7.0, extended classic.
Once I change the Account Assignment Category to Asset and I search for the asset number I receive the following message.
Missing Authorization check to display master data.
The user ID has SAPALL, also communication between R3 4.7 and SRM is working fine for vendors, PO's, Confirmations, Invoices, material groups, etc....so the system users would appear to be working ok I assume.
Also, if I click the Create Asset Master button on the detailed account assignment screen it is not able to generate/retrieve an asset number as it should.
Any ideas? The account assignment configuration should be fine, it matches our production SRM 3.0 system, which has no issue with this functionality.
Thanks,
Matt

It seems that the table does not have the entries, maybe b/c we are on R3 4.7. Could you tell me what the entries are suppossed to be to allow the Asset and Cost Center lookup? The search does work for WBS element though and I don't see anything specific to WBS element in that table. In any case if you know the entries that would be great, also this table is not modifiable via SM30, here are the entries that I have in that table.
AUF_NETNR     PLM_HELPVALUES_AUTHCHECK
BU_PARTNER     BUPA_BAPI_F4_AUTHORITY
DAENR     PLM_HELPVALUES_AUTHCHECK
DOKNR     PLM_HELPVALUES_AUTHCHECK
EQUNR     PLM_HELPVALUES_AUTHCHECK
KUNNR     PARTNER_BAPI_F4_AUTHORITY
LIFNR     PARTNER_BAPI_F4_AUTHORITY
MATNR     PLM_HELPVALUES_AUTHCHECK
NW_AUFNR     PLM_HELPVALUES_AUTHCHECK
PARNR     PARTNER_BAPI_F4_AUTHORITY
PS_POSID     PLM_HELPVALUES_AUTHCHECK
PS_PSPID     PLM_HELPVALUES_AUTHCHECK
QMNUM     PLM_HELPVALUES_AUTHCHECK
S_AGNCYNUM     INT_FLBOOK_F4_AUTHORITY
S_AIRPORT     INT_FLBOOK_F4_AUTHORITY
S_BOOK_ID     INT_FLBOOK_F4_AUTHORITY
S_CARR_ID     INT_FLBOOK_F4_AUTHORITY
S_CITY     INT_FLBOOK_F4_AUTHORITY
S_CONN_ID     INT_FLBOOK_F4_AUTHORITY
S_COUNTNUM     INT_FLBOOK_F4_AUTHORITY
S_COUNTR     INT_FLBOOK_F4_AUTHORITY
S_CUSTOMER     INT_FLBOOK_F4_AUTHORITY
S_FLCONN     INT_FLBOOK_F4_AUTHORITY
S_FLCONN1     INT_FLBOOK_F4_AUTHORITY
S_FLCONN2     INT_FLBOOK_F4_AUTHORITY
S_PLANETYE     INT_FLBOOK_F4_AUTHORITY
S_TRNUM     INT_FLBOOK_F4_AUTHORITY
TPLNR     PLM_HELPVALUES_AUTHCHECK
USCOMP     SUSR_BAPI_F4_AUTHORITY
XUBNAME     SUSR_BAPI_F4_AUTHORITY

Can I create my own attributes in iDS?

I know to store my photo I can use the jpegPhoto attribute, but what about if I want to store other binary objects like maybe my fingerprints, can I create my own attributes for it, and how?
Or I can't do that?

You can use Directory Server Console to create new attributes. After adding new attributes to your schema, you must create a new object class to contain them.
Creating object class:
1.Click Create on the Object Classes tab.
2.Enter a unique name for the object class in the Name text box.
3.Enter an object identifier for the new object class in the OID (Optional) text box.
4.Select a parent object for the object class from the Parent drop-down menu.
5.To add an attribute that must be present in entries that use the new object class,highlight the attribute in the Available Attributes list and then click the Add
button to the left of the Required Attributes box.
6.To add an attribute that may be present in entries that use the new object class,highlight the attribute in the Available Attributes list and then click the Add
button to the left of the Allowed Attributes box.
7.To remove an attribute that you previously added, highlight the attribute in the Required Attributes list or the Allowed Attributes list and then click the
corresponding Remove button.You cannot remove either allowed or required attributes that are inherited
from the parent object classes.
8.Click to OK.
To create a new attribute:
1. Display the Attributes tab.
2. Click Create.
The Create Attribute dialog box is displayed.
3. Enter a unique name for the attribute in the Attribute Name text box.
4. Enter an object identifier for the attribute in the Attribute OID (Optional) text box.
5. Select a syntax that describes the data to be held by the attribute from the Syntax drop-down menu.
6. If you want the attribute to be multi-valued,select the Multi-Valued checkbox.The Directory Server allows more than one instance of a multi-valued attribute
per entry.
7.Click OK
This is repersenting binary data.
You can represent binary data, such as a JPEG image, in LDIF using one of the following methods:
The standard LDIF notation, the lesser than (<) symbol. For example:
jpegphoto: < file:/path/to/photo
If you use this standard notation, you do not need to specify the ldapmodify -b parameter. However, you must add the following line to the beginning of your LDIF file, or your LDIF update statements:
version:1
For example, you could use the following ldapmodify command:
prompt% ldapmodify -D userDN -w user_passwd
version: 1
dn: cn=Barney Fife,ou=People,dc=siroe,dc=comchangetype: modify
add: userCertificate
userCertificate;binary:< file: BarneysCert
Using base 64 encoding. You identify base 64 encoded data by using the ::
symbol. For example:
jpegPhoto:: encoded_data
In addition to binary data, other values that must be base 64-encoded include:
Any value that begins with a semicolon (;) or a space
Any value that contains non-ASCII data, including new lines Use the ldif command-line utility with the -b parameter to convert binary data to LDIF format:
ldif -b attribute_name
where attribute_name is the name of the attribute to which you are supplying the binary data. The binary data is read from standard input and the results are written to standard output. Thus, you should use redirection operators to select input and output files.
The ldif command-line utility will take any input and format it with the correct line continuation and appropriate attribute information. The ldif utility also assesses whether the input requires base 64 encoding. For example:
ldif -b jpegPhoto < mark.jpg > out.ldif
This example takes a binary file containing a JPEG-formatted image and converts it into LDIF format for the attribute named jpegPhoto. The output is saved to
out.ldif.
The -b option specifies that the ldif utility should interpret the entire input as a single binary value. If -b is not present, each line is considered to be a separate input value.

Unable to create a data server for xml file

Hi ,
I have created a data server for a xml file but when i test the connection i am getting the below error.
java.sql.SQLException: class org.xml.sax.SAXException
Prefix not found: xsi
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java:1100)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.getLocalConnect(SnpsDialogTestConnet.java:371)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.localConnect(SnpsDialogTestConnet.java:794)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.jButtonTest_ActionPerformed(SnpsDialogTestConnet.java:754)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.connEtoC1(SnpsDialogTestConnet.java:137)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.access$1(SnpsDialogTestConnet.java:133)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet$IvjEventHandler.actionPerformed(SnpsDialogTestConnet.java:87)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
at java.awt.Component.processMouseEvent(Component.java:6263)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6028)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4630)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Can any one help me out with this issue ?
Thanks in advance,
Balajitk

HI Balaji,
Below is the sample xml file which i have saved as test.xml and placed it @ D: drive
Test.xml:
<employee>
<emp>
<eno>1</eno>
<ename>Test1</ename>
</emp>
<emp>
<eno>2</eno>
<ename>Test2</ename>
</emp>
<emp>
<eno>2</eno>
<ename>Test2</ename>
</emp>
</employee>
Goto Topology >Expand Technologues>right click on XML and select new data source
in Defination Tab, provide the physical architecture name
in JDBC Tab, provide the below details
JDBC Driver: com.sunopsis.jdbc.driver.xml.SnpsXmlDriver
JDBC URL: jdbc:snps:xml?f=d:\test.xml&d=test.dtd&re=employee&s=TEST&ro=false
Save it
Click on Test Connection and again click on test, it should show test connection as "Successfully Test"
Hope this may helps you
Regards,
Phanikanth

An error occured while creating the original attribute for

Hi All,
We encounter this error in "An error occured while creating the original attribute for " DMS very often when a user edits a file & tries to check in.
I searched the forums & realized that this is caused by the inconsistencies in the KPRO & DMS server and removing these
inconsistencies will repair this issue.
I have been deleting the inconsistencies using DMS reports DMS_KPRO_READ & DMS_KPRO_CHECK1 and it resolves the error
so the file is unlocked. But I haven't been able to figure out the ROOT cause of this issue.I couldn't find any information on the root cause of this issue. What can be done to fix this error permanently.
Regards
-Neha

Hi Neha,
Please go to transaction SE16 and enter 'SDOKPROP' as table. Then enter 'DMS*' in the field PROP_NAME and press F8. Now all DMS related entries should be displayed to you. Please compare them with the following entries displayed in the attached screenshot and maintain the missing entries.
DMS_ACTIVE_VERSION 00 Active Version
DMS_APPLICATION 00 Logical application
DMS_CHECKOUT_USER 00 Checkout User
DMS_CREATE_AUDIT 00 Generate new version of the original
DMS_DEFAULT_LANGUAGE 00 Default Language
DMS_DELETEABLE 00 PHIO deletable
DMS_DOC_KEY 02 IWB_DMS01 DMS_DOCKEY Document info record
DMS_DOC_VERSION 00 Version of relevant document
DMS_DRAW_APPNR 00 Application number from DRAW
DMS_DRAW_DTTRG 00 Data carrier from DRAW
DMS_DRAW_FILEP 00 File name from DRAW
DMS_FILE1 00 File name(firstpart)
DMS_FILE2 00 File name(secondpart)
DMS_FILE3 00 File name(thirdpart)
DMS_FILE_ID 00 GUID that points to table DMS_PHIO2FILE
DMS_FRMTXT 00 Format description, ID of additional file
DMS_MUP_CAT 00 Markup category
DMS_MUP_FLAG 00 Markup flag
DMS_ORDER 00 Sequence of additional files
DMS_STATUS 00 Document status
DMS_STATUSNR 00 Number in status protocol
DMS_STATUSNR_X 00 References to Status Log
Please pay attention that all entries are typed well and that there are no spelling errors. If all these values are maintained correctly in table SDOKPROP the dump and the error message should no longer appear.
For further information you can also see the corresponding SDN WIKI page under
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/plm/error26296in+CV01N
Regards,
Ravindra

While creating the Data source for Sql server am getting this error?

Hi i new to Power BI sites and office 365,
For my first step
1. i have successful creaeted Gateway in Office 365
2.Now i have creating the Data source for that gateway using Sql server R2
3.While Creating the Data source using the Corresponding gateway i have given and next phase set Credentials phase i have noticed one pop up window and it will shows me like
Data source Settings and below in that window it will show's u the things like
Datasource Name.
Loading......
Credentials type:
Privacy Level:
Failed to verify parameter
I will get this results finally ,so hw should i achive this probelm ,Please let me know if any one knows
So kindly give me the proper answer for this.
Regards

Any suggestions for Chinnarianu?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

An error occured while creating the original attribute for message no26 296

Hi All,
I am new to DMS , we are trying to store PM documents on content server , created a storage category and while assigning files to storage category then on saving the document i get the below error :
An error occured while creating the original attribute for
Message no. 26 296
Diagnosis
An error occured while creating an original in the Knowledge Provider.
System Response
The original could not be created.
Procedure
Contact the systems administrator and check the log file (transaction Evaluate application log, object SDOK).
Please let me know what configs i am missing ...
Thanks in advance
regrds
pushpa

Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar

How to create an marketing attribute for the busines partner

hi guys,
can any body help.
how to assign/create the marketing attribute set to the business partner.
is there any function module which to create the marketing attribute for the business partner by passing the BP GUID.
if any body is having an sample code can u please post it.
regards
viswag

Hi Viswa,
In CRM 4.0, marketing attributes set can be created at T-code [CRMD_PROF_TEMPL]
The created attribue set can be assigned to BP at T-code [CRMD_PROF_BP]
The other way you can open the BP, in marketing at marketing attributes tab your can assign the created attribute set.
regards
satish kumar
*-Reward points if found helpful.

How can we create a data source on structures

Hi,
   How can we create a data source on structures.
Regs,
abdul

Abdul,
    Welcome to SDN!
    We can't create Datasource using Strcutres. We need to have base tables.
    For Function Module Extractors, we will create strctures. We will use these strctures as Extract Structures. But, we will get the data from Base tables only not from Strcutures.
Strctures won't contain data.
all the best.
Regards,
Nagesh Ganisetti.

Can we create two dashboard prompts for the same column in the samepage

hi ,
can we create two dashboard prompts for the same column on the same page,
I have a date column and I am trying to create 2 dashboard prompts on the same page one as from date and the other one as to date.Is this possible to create.When I am trying to create it is giving me error like cannot use same column for creating the prompt
Any suggestions or ideas

863997 wrote:
hi ,
can we create two dashboard prompts for the same column on the same page,
I have a date column and I am trying to create 2 dashboard prompts on the same page one as from date and the other one as to date.Is this possible to create.When I am trying to create it is giving me error like cannot use same column for creating the prompt
Any suggestions or ideasYou are correct. You cannot build two prompts on the same column. Use this link for instructions on how to build a "between prompt" because of this fact:
http://oraclebizint.wordpress.com/2008/02/26/oracle-bi-ee-101332-between-prompts-for-date-columns-using-presentation-variables/

How to create the Data Type for the receiver end?

Hello Expertise
I wanted to Create a Data type for Receiver end in PI.
Sender end is ECC.
Receiver end is SRM
Here's the Data type for Sender end as
Can anyone help to create the Data type for Receiver end i.e SRM.
Thanks in advance.
Regards
karan

Hi Karan,
Please don't call Sir, we are just trying to help each other.
Please go through below scenario's and check your configuration.
ABAP Client Proxy to ABAP Server Proxy Scenario - Process Integration - SCN Wiki
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?overridelayout=true
http://wiki.scn.sap.com/wiki/display/XI/Step-by-step+FTP+to+ABAP+Proxy
regards,
Harish

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date?

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date? We are facing a scenario where trx date is lower than the actual ship to which logically sounds incorrect.
Appreciate any quick response around this.

Hi,
Transaction date will be your autoinvoice master program submission level date (If you haven't setup any logic.
Please check the program level default date, if user enter old date ststem will pick the same.
Customer is trying to set the value of the profile OM:Set receivables transaction date as current date for non-shippable lines at the responsiblity level. System does not set the transaction date to current date in ra_interface_lines_all.
CAUSE
Customer has used the functionality in R11i. But after the upgrade to R12, the system functions differently than R11i.
SOLUTION
1.Ensure that there are no scheduled workflow background process run.
2.Set the profile "OM: Set Receivables Transaction Date as Current Date for Non-Shippable Lines" at Responsibility level only as Yes.
3.Now switch the responsibility to which the profile is set.
4.Create order for Non-Shippable Lines and progress it to invoicing.
5.Ensure that the 'workflow background process' concurrent program is run in the same responsibility and this line is considered in it.
6.Now check if the 'SHIP_DATE_ACTUAL' is populated to ra_interface_lines_all

I have four iphones on my icloud account, can i create an icloud account for each phone?

I have four iphones on my icloud account, can i create an icloud account for each phone?

Welcome to the Apple Community Joe.
There is nothing stopping you doing so, but you won't be able to sync anything between them.

How can I create a Forms9i Runtime for client distribution

Currently we have an application developed in Forms 5.0.6.8.0 our Database has been upgraded to 9i DB. The application is working fine with this combination but we want to upgrade Forms in order to get Oracle Support. We just get the Developer Suite 9i package and we're trying to test our application with this software.
How can I create the client runtime for Forms 9i?
My application will work with Win 95 and 98?
Thanks.

Oracle9i Forms is web-only. Forms 6i is the last release of Forms to have client/server and character mode.
You can test Forms from the Builder by installing iDS. To deploy Forms using iAS follow the documentation. It's all there in the deployment guide.
iAS and Forms doco can be found on OTN.
Regards,
Robin Zimmermann
Forms Product Management

HT204053 how can i create multiple icloud accounts for my family members

how can i create multiple icloud accounts for my family members

Thanks... I appreciate the reply. Since I wrote the previous email, I actually went and changed my apple id (the main id) and the documentation I looked at said iCloud will set mail up automatically(?)... I had it working before.
Also, I tried to manually set up the ID via the Mail Accounts screen(s) and I can't figure out what my server information is... Pop or Imap? What's the outgoing server and the incoming server?
I typically have never had problems setting up mail accounts (in apple mail) with no problem.
Can anyone point me in the right direction?
Thanks in advance!

Can´t create a date attribute for basic asset

Similar Messages

Maybe you are looking for