Can't create Theme using a View - Help

Has anyone created a theme off of a table view?
I'm new to the GIS world. When I try to create a new Theme using a View as my source 'Base Table'. It says that 'the base table <mytableviewname' does not have any sdo_geometry column defined.'
I created the view using PL/SQL developer and it shows the geometry data field named: SHAPE
TABLES
VW_OD_COUNTY
COLUMNS
OBJ - SHAPE
TYPE (Folder)
MDSYS.SDO_GEOMETRY (Yellow cube)
other stuff.....
Anyone have luck using views instead of tables?
Thanks -Joseph-

If you have not inserted a record into USER_SDO_GEOM_METADATA for this view that you have created, then you must do that so it is "recognized" by Spatial Advisor and any other application. See the Oracle Spatial Users Guide and Reference for how this is done. Its quite simple.

Similar Messages

I have many hours of home movies copied years ago to DVDs. Can I edit them using iMovie? All the Help instructions assume that you will be transferring info from cameras.

I have many hours of home movies copied years ago to DVDs. Can I edit them using iMovie? All the Help instructions assume that you will be transferring info from cameras not from DVDs.

See my User Tip here.
https://discussions.apple.com/docs/DOC-3951

How can I create a full-screen view of Keynote slide in Snow Leopard?

How can I create a full-screen view of my Keynote slides in Snow Leopard?
I'm going to be importing into ScreenFlow to create a video.
Thank you!!

Welcome to Apple Support Communities.
Do you want static screen captures or motion video of slides as titles, bullet points, and the like are presented?
Run the Keynote slide presentation in full-screen mode, then...
Static full-screen captures - use Command+Shift+3.
Static partial-screen captures - use Command+Shift+4 and use cursor to select the area of the screen to capture.
If you want motion video as builds occur, why not use Keynote's built-in Share, Export function?
(I'm on iLife '09.)
Also understand that the default slide format for Keynote is 1024x768, not full-screen MacBook 1280x800 screen size, so you'll have wide black borders unless you change the default size or crop the finished screen captures.
Message was edited by: kostby

We can't create form using dblink and synonim

We have created a dblink pointing to a table in the remote database.
When we create a form based on table or view using this dblink, we get the error "page not found".
We read from
Re: I can't create form using dblink
that we must create a synonim, and this was done creating one in the same schema of the db-link using the "Database Objects" of oracle portal 10g (external db is an oracle 9.0.2).
The new synonim work (tested with reports and pl/sql page)
but if we click on "Grant Access" (of the synonim) we get the following error :
Error: The underlying object of the synonym does not exist, is a remote object or is not of type function, procedure, package, sequence, synonym, table or view. (WWV-17076)
Does form work only with table and view of the portal database (not external one)? or have we loose something in the creation of the synonim?
Have someone succesfully created a form based on a db-link towards an external database?
Thanks to all.

Hei guys, has nobody created succesfully a data-driven forms based on a dblink towards an external database?
I can't believe this!!!!

Can i create SalesOrder using SalesQuotation

Hi all,
    I want to create SalesOrder with reference using the SalesQuotation. How can i achieve this.
    I am using JAVA to develop this. I am using DI API to achieve this. I am creating SalesOrder directly by giving the items and their quantities and succeded. But when i want to give the SalesQuotation number Reference while creating salesOrder it is giving error.
-5002Item no. is missing [ORDR.ObjType]
com.sap.smb.sbo.wrapper.com.ComFailException: Invoke of: DoQuery
Source: SAPbobsCOM.Recordset.6.7
Description: 1). [Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near the keyword 'FOR'.
2). [Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared.
     at com.sap.smb.sbo.wrapper.com.Dispatch.invokev(Native Method)
     at com.sap.smb.sbo.wrapper.com.Dispatch.invokev(Unknown Source)
     at com.sap.smb.sbo.wrapper.com.Dispatch.callN(Unknown Source)
     at com.sap.smb.sbo.wrapper.com.Dispatch.call(Unknown Source)
     at com.sap.smb.sbo.api.Recordset.doQuery(Unknown Source)
     at SalesOrderCreate.main(SalesOrderCreate.java:133)
Can any body give me a sample code that how can we create salesOrder using SalesQuotation.
regards,
JAYA

Hi
I've never tried doing it in java. But i here is an example of how it is done in VB.Net, im sure it will help you connect the dots. This example makes a invoice based on a sales order
Dim oInvoice As SAPbobsCOM.Documents
        oInvoice = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices)
        oInvoice.CardCode = BPCode.Text
        oInvoice.DocDueDate = Now
        oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
        'OrderStr is sales order DocEntry,not Docnum
        oInvoice.Lines.BaseEntry = CInt(OrderStr)
        oInvoice.Lines.BaseLine = 0
        oInvoice.Lines.Add()
        oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
        oInvoice.Lines.BaseEntry = CInt(OrderStr)
        oInvoice.Lines.BaseLine = 1
        lRetCode = oInvoice.Add
        oCompany.GetLastError(lErrCode, sErrMsg)
        If lRetCode <> 0 Then
            MessageBox.Show("Not Added" & lErrCode & " " & sErrMsg)
        ElseIf lRetCode = 0 Then
            'oCompany.GetNewObjectCode(OrderStr)
            MsgBox("Added Invoice")
        End If
please not, OrderStr is sales order DocEntry,not Docnum
Hope this helps

How do normal maps work in photoshop? Can I create them?

Hi i am new to photoshop!
I am using photoshop to make textures for my pinball simulator. I've learned how to add color with the lasso select but I want the textures to look better so I wanted to add in more, so I was wondering if I could create a bit-map or normal maps? So I guess, the easiest way to say it is.
How do normal maps work in photoshop? Can I create them?
Chhampion

NVIDIA Texture Tools for Adobe Photoshop

Can I create and use more than one repository on OVM 2.1.5

The version of Oracle VM I am using is 2.1.5 .
I wonder can I create and use more than one repository on OVM 2.1.5. Because I want to install different GOS on different disks.
I know in Oracle VM 2.2 we can use following commands to realize that.
a. #/opt/ovs-agent-2.3/utils/repos.py –n /dev/mapper/mpathxp1
b. #/opt/ovs-agent-2.3/utils/repos.py –r UUID
c. #/opt/ovs-agent-2.3/utils/repos.py –i
And other repositories can also be mounted and found under /var/ovs/mount/UUID.
But in Oracle VM 2.1.5, seems just one repository can be created and mounted. For example:
At first, I create a repository using mpath1p1:
a. # mkfs.ocfs2 /dev/mapper/mpath1p1
b. #/usr/lib/ovs/ovs-makerepo /dev/mapper/mpath1p1 C "cluster root"
c. I can find the repository has been mounted under /OVS.
But if I want to use "/usr/lib/ovs/ovs-makerepo /dev/mapper/mpath2p1 C "cluster root" to create another repository, and check the mount status using command "mount", these two disks are all have been mounted under /OVS.
"# cat /etc/ovs/repositories", only mpath1p1 with UUID was recorded there.
After reboot, only repository with mpath1p1 was mounted under OVS.
Can anyone tell me how to use more than one repositories on OVM 2.1.5. Do I have to install all the GOSs on the same disk and repository.
Thank you very much.

Now I've known how to create different repository. They will be mounted under /OVS/UUID. Thanks.

How can I create index in a view?

Dear all,
How can I create index in a view?
Best Regards,
Amy

A view is a stored query. It gets executed at run time. A view does not occupy any physical space in the database (other than the insignificant amount of space required to store the query in the data dictionary).
A materialized view actually materializes the results of a query in a separate table structure, so it consumes physical space in the database. It also has to be refreshed at some interval, either synchronously with DML or asynchronously on a set interval.
Justin

Where are my movies on my iPad...they are sync'd according to iTunes...I just can't find them!!! Help...I'm going on holiday in a few days and want to watch the movies I paid for and thought I downloaded!!! :-}

Where are my movies on my iPad...they are sync'd according to iTunes...I just can't find them!!! Help...I'm going on holiday in a few days and want to watch the movies I paid for and thought I downloaded!!! :-}

They should be in the Videos app :
If they aren't in there then have you got a film age rating set in Settings > General > Restrictions that is hiding them ?

Can i create report using more than one Business Area ?

Hi Gurus,
Can i create report using more than one Business Area?.Could anybody tell me that report will work?.
Vikram

You should have no problem creating a report using more than one Business Area, we share folders across BAs all the time for ease of management. As long as your joins exist its not a problem.
Matt Topper
TUSC, The Oracle Experts
[email protected]

HT4061 recently downloaded Ios7 to iphone4. am unable to get app icons on to home page. can only open by using spotlight. any help would be appreciated

recently ugraded iphone4 to Ios7. am unable to get app icons on home screen. can only access by using spotlight. any help appreciated

Hi, are you saying that your homepage is completely devoid of Apps, even the dock at the bottom of the screen?
Regards,
Steve

Have upgraded to Lion 10.7 from 10.6 and now it keeps logging off abruptly though the power settings are proper and i can not take backup using timemachine. any help welcome...

Have upgraded to Lion 10.7 from 10.6 and now it keeps logging off abruptly though the power settings are proper and i can not take backup using timemachine. any help welcome...

Have upgraded to Lion 10.7 from 10.6 and now it keeps logging off abruptly though the power settings are proper and i can not take backup using timemachine. any help welcome...

How can I create Droplets using Actions with several Stops?

My Droplets (using Actions but with several Stops) work very nicely when using a single image source. However when using multiple images thing start to go crazy.
At the first stop on the first image a pop-up emerges asking me to continue to the next image or stop. If I select stop I can continue with the Action for this first image and complete the Action on that first photo.
If I select continue it halts the action on that photo at the first stop then opens the 2nd image and repeats the action to the first stop on the next photo then the pop-up appears again and the cycle repeats.
How can I create Droplets using Actions with several Stops?

I don't believe this is possible when starting from Java. I think you need to start with a WSDL to get this to work. I am curious as to why having multiple WSDLs is an issue, would you care to eloborate.
Thanks

I have bought ipads for my kids, so far i can only let them use my apple id and this means that any apps they download sync to my apple id, the problem is that one game they want to play wont allow them to have seperate profiles?? can anyone help?

i have an ipad mini, i have bought them for my kids too.
how can i get them seperate profiles so they can use or play their own apps and not sync with my account.
i have tried to create seperate apple ids but this wont let me due to their ages.
i have turned on and off home sgaring but this made no change.
any ideas??

Apple has a reptutaion of maintaining a high level of privacy and security. This means that accounts are not meant to be shared, though they can be, and defintitely not merged.
That does not come without a price however.
I completely understand that the kids would want their own profiles when playing games, but app developers are required to follow apple's protocols in order to distribute their apps via apples app store and be used on their products.
I'm going to go out on limb here and say the apple has chosen to put the job of parenting in the hands of parents.
What I do know is that as the kids get older and everybody gets their own devices and accounts, it will be a lot easier and lot less confusing when everyone has their own apple id. (especially when they start having their own contacts, calendar events and everyone in the home is syncing to icloud)
Frequently asked questions about Apple ID
Learn the answers to frequently asked questions about Apple ID.

How to create repository using a view in OBIEE

Hi,
Can any one explain the procedure how to create a repository using a view. For example
test_v
select a.col1,a.col2,b.col1,b.col4,c.col5,c.col6 from table a,table b, table c where a.col1= b.col1 and b.col1 = c.col1
1. Assuming that i have imported only one view.
Thanks and Regards,
Hanuman.

Hi,
You can create the vie in the physical layer of your repository, select "Select" from the dropdwan box when you create a new table. Next add the columns. They must have the same names as in your view.
If you don't have any other tables in your repository, created an alias of your view and make a "dummy" join with the original view. Next create your BM and PL.
regards
John
http://obiee101.blogspot.com/

Can't create Theme using a View - Help

Similar Messages

Maybe you are looking for