Can't enable FIPS after 34.0.5 update

When Firefox updated to the latest version all of my saved passwords disappeared. After a lot of trial and error I found the only way to recover my passwords was to restore Firefox from a backup and disable FIPS before updating. However, now I have updated to 34.0.5 I cannot re-enable FIPS. The instructions to enable it on Mozilla's website are outdated and do not apply to the latest version. The enable FIPS option is still there in security devices but when it is clicked nothing happens, except my passwords disappear again until I restart Firefox, and FIPS remains disabled. Does anyone know of a fix?

After downloading three app updates today, I find that I can no longer rearrange my app icons.
I hold the icon I wish to move and slide my finger once the icons begin to boogie but the image of the icon I'm moving is delayed by a full page distance from my directing finger. Then when I release my touch, the icon I'm trying to move simply snaps back into its previous location.
I've rebooted, reset, and resynced to no avail.
I sure hope I don't have to repeatedly go through the restore cycle to correct this problem.
Also, the backup while resyncing takes forever after this icon problem appeared. Is my iTunes calling home with excessive error reports the cause of this slowness?
Is the app update software is failing to write to disk correctly? There sure seems to be a corrupting influence somewhere in this updating process.
Can anyone offer a cure or even a clue here?

Similar Messages

Can not open itunes after installing latest version update 11.2

Can not open itunes after installing latest version update 11.2

See Troubleshooting issues with iTunes for Windows updates.
tt2

Thinkpad E440 can't use wireless after 2.07 BIOS Update

Hi all, I need some help. I just bought a new thinkpad edge e440-Q01 last sturday. After I installed Win 7 ultimate 64 Bit, all the driver, everything work fine, i can connect to the internet, start working etc.
Then I update the BIOS, first it was 1.61 version then I upated my BIOS using BIOS utility for win 7 (downloaded from http://support.lenovo.com/en_US/downloads/default.page). After that i can't connect to the interter via wireless LAN. It was said that I need to turn on the "hardware radio switch", both intel wireless utility and thinkvantage connection utility says i need to switch the wireless on, but, i can't find the hardware switch for wireless on thinkpad edge e440.
I try to push F8 button, as there is a symbol of wireless LAN, but nothing happens.
Then when I open the device manager, there is lenovo connect 1.0 device and i can't find it's driver, so it remain as unknown device.
I try to reinstall the windows, but now i don't have bluetooth to.
Other driver such as GT740, Ethernet, chipset, usb, etc are working just fine.
Anyone can help?

just for addition, lenovo bios update utility have 2 option task. to update bios and model number. ican update the bios but not the model number.

HELP! I can't use SKYPE after the 7.0 update!!

After my SKYPE automatically updated to the latest version (7.0 i guess, because i already uninstall it), signed in but the message windows can't be seen... I only can see the incoming message notification on my PC's taskbar... Need help right now! I got a lot works to do with SKYPE... Need to reply my clients message...
Solved!
Go to Solution.

Stop Skype from running on your computer. Quit or use Windows task manager to kill any Skype.exe processes.
Go to Windows Start and in the Search box type %appdata%\skype and press Enter. Find now a folder with the name of your Skype account. Open this folder. You will find there a file named config.xml. You may see only config but with XML Document in the Type column. Delete this file. Restart Skype.

Can't Enable XMP after BIOS flash to V1.4 on P55-GD85

I didn't put this in the BIOS section because while the BIOS is involved, I don't think it's necessarily a BIOS issue. However, if it should go there please move it.
While not new to computers by any stretch I committed the cardinal sin of updating my BIOS when I didn't absolutely have to. While their were some issues I'd hoped would be fixed with a new BIOS revision, they weren't critical.
I have a i7 860 Lynnfield system running Win 7 Home Premium 64 with a MSI P55-GD85 mobo which has been running fine since being built in March of this year. This was the first BIOS flash since I've built the system. The system came with either V1.0 or V1.1 (I think it was V1.1). I checked using Live Update (yes, I now know this is bad) and found there had been several udpates since my current version. I went ahead and used Live Update to flash the BIOS (yes, I know...not a good idea). Contrary to the horror stories the flash itself went fine. I watched it flash the BIOS and everything verified fine. Of course after the update I had to reset my BIOS settings to get the system to run which went fine. The problem is that the one thing I can't do is enable the XMP option for the memory without the system crashing. If I enable this option the system will POST and then do a memory dump before ever getting to the desktop. Without turning this option on I can't take full advantage of my RAM. I am running G.SKILL Trident 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 2000 (PC3 16000) which are XMP compliant and ran without issue up until the BIOS update. It is possible that there is some other setting that I didn't reset after the BIOS change to allow this to work that I am missing. I know I did a bunch of tweaking and changing of settings trying to get things to run correctly when I first built the system. I've gone over and over the BIOS and can't find anything else to try to get me to allow to enable the XMP option without crashing. By simply enabling that option my system would normally run stable at about 3.6-3.7GHz.
Does anyone have any ideas as to why this might be happening or what I can do about it? About the only other thing I can think of is to reflash the BIOS back to a previous version to see if that helps. I am sure there is something I am missing as there is no reason the BIOS shouldn't allow the XMP feature to be enabled without crashing. Any help would be most appreciated. Thanks.

Have you try to increase your RAM voltage to 1.55v ~1.6v?

Can't enable Bluetooth after 2.1 upgrade

Upgraded (original iPhone) to 2.1. After reboot Bluetooth will not turn on. It just spins forever in the pref pane.

After the 2.1 upgrade my iPhone would not recognize my Jawbone. Per this discussion, I restored the iPhone in iTunes 8. Pairing is back! Both the Jawbone and TomTom were immediately there.
Thanks!

Can't log in after 10.6.8 update

I just updated to 10.6.8 tonight, and went on the App Store to see if any more news about Lion. Noticed I had 4 updates, selected "Update All" and signed in.... gear wheel just spun and spun and after a minute or two told me login failed. Opened iTunes, shut off home sharing and then attempted to sign in to reopen it, and got "the password you entered is incorrect" (no, it's not). Tried a restart twice, checked my firewall, still no go. Are the servers just bogged down with people updating? earlier this evening when I tried downloading the update, it told me 4 hours(!?!?) to download 275 mb with a simultaneous dual band Airport Extreme, sitting 8 feet from my MBP. Later on it only took a few minutes, but still left me with this problem. Anyone else

Try booting in Safe Mode. Mac OS X: Starting up in Safe Mode
It can take a little longer to boot in Safe Mode then a normal boot. Once you are in Safe Mode, go to the Apple menu (top left in your screen) then click: Restart.
I just updated to 10.6.8 tonight, and went on the App Store to see if any more news about Lion.
Lion is not available until July. Apple - OS X Lion - Get Lion in July. Only from the Mac App Store.
And.... launch iTunes. From the menu bar click Store / View My Account / Edit Payment Information. Make sure the Security code and expiration date for your credit / debit card is available and correct then click Done. This is necessary even for updating software

Can't send mails after 10.4.6 update

Well, the topic pretty much says it all. After I upgraded to 10.4.6 I can no longer send mails. This happens with three completely unrelated SMTP servers, so I'm pretty sure it's a Mail problem. Receiving mails works without any problems and excepte the return of the ugly bubbles everything else is working fine as well.
I already re-entered my login values, didn't change a thing.

I didn't even update. One day Mail just stopped sending mail. Can't remember doing anything specific. Looks like a common problem these days from having read several discussion boards. I'm on the bandwagon. Reinstalled, created new accounts, triple checked, checked with ISP, disabled password authentication...
I even tried downloading another mail program, Revolver, but that can't send either, so I'm stumped, both recieved mail just dandy. In Revolver it gives a better hint to the problem "SMTP Error 103 (Name Resolution Error)", Doesn't help much though. As I understand, 103 is just a general error anyway.

How can I enable for-each loop in Creator update 1?

I try to use for-each loop, but I got error message from compiler is
" for-each loops are not supported in -source 1.4. (try -source 1.5 to enable for-each loops)"
How can I switch my source to 1.5.. I am using jdk 1.5. Confusing.
Thanks .
Richard

Hi!
Actually Sun Java Studio Creator doesn't support Java EE 5 projects. If You want to create Java EE 5 project, try to use NetBeans with Visual Web Pack installed.
Thanks,
Roman.

Can't open QuickTime after trying to install update 7.4

I've tried to update my Quicktime Software to the 7.4 that keeps popping up on my software update. After it loads, verifies, and goes to install I receive the notice the Quicktime can't be installed. an unexpected error occurred and the installer package has been moved to the Trash. It tells me to try again, open the package from the finder... besides not being able to install the update, now I can't open QuickTime at all. Ideas?

To The Apple Discussion Boards!
Repair permissions & restart your computer.
Install QT again either from the Software Update control panel or download the full installer directly from QT download site.
After you install QT, repair permissions & restart again.

Quicktime Can't open files after 10.4.10 update

I thought I had escaped all problems after installing the 10.4.10 combo updater, repairing permissions, etc. But today while trying to watch the iPhone Guided Tour video I discovered that Quicktime can't open it, nor anything else for that matter. Can't open audio files of any type, nor any video format. I have the current version of Quicktime, and after reinstalling it and reinstalling the combo updater, the situation remains broken. Quicktime Player will launch, but only to an error message :"Error Opening Movie. The movie could not be opened."
Curiously I can watch the iPhone movie in iTunes. And all other audio formats supported by iTunes play as usual. Any suggestions?

Hey Douglas,
Would you mind expounding on this .... there is more than one Library.
In the "main" (not the house user library) I did find a file in the Quick Time folder "Toast Video CD Support.qtx", and I removed it (that was the only file in there). Still getting the gray ? mark.
Trying everything suggested in this forum and then some ... no good.
did you try removing 3rd party codecs from the
/Library/Quicktime folder to see if one of them has a
conflict with the update?

Premiere/Media Encoder can't render/export after 10.9.3 update. Any Answers?

My computer ran the OSX 10.9.3 update a couple nights ago, and suddenly Premiere/Media Encoder can not export. It just freezes up the computer until I cold crash it. Same if I try to render a timeline in Premiere. This issue just started yesterday. It still persists after wiping my hard drive and doing a clean install of everything, which of course just put 10.9.3 back on there. This issue does not exist on my laptop that has not been updated yet. However, I have enough work and not enough time to be trying to edit everything on my laptop while this get worked out. Has anyone else got this issue in the past day or two?

Hey Todd,
I had two active projects that suddenly could not render/export. One is quite massive and has RG Colorista quite a bit throughout it, however I could not export a timeline without any plugins on it. The other project is also clean of plugins. Then I started a new project and it went out just fine until I put the RG plugin on it. But here is my newest glitch. I just made a change to an old show and all of my titles done in Title Tool were resized and positioned. Blown up and shifted to the right. If I take the same file and put it on my laptop which still has not got 10.9.3, they are just fine. Scaled properly and centered between title safe. But now on 10.9.3 they are blown up and going off the screen.

STILL can't open Mail after 10.6.8 update

I have tried everything suggested on previous posts. I went into CrashPlan, fetched my backup mail, dropped it in Applications. Tried opening it, to no avail, Then re-installed the update. Still nothing. Tried this several times. Further, I've just received my regular notice the CrashPlan backed up today, which I think means they have now backed up the messed up mail and I can no longer access my original mail application?? HELP.

Make an appointment with the Genius' at an Apple Store. This is a new problem with the "automatic update". My mail was working great until I did the normal automatic updates. After the update my mail icon would just bounce once and the message about my version not working. I also did the dropping in my ap folder, didn't work.
Prior to my Genius appt. I had re-installed mail from the "applications" from original "Install OS X" dvd. Not the "application install dvd". It gave me the original version. I then tried to do an update but it said it was updated. Which was impossible because the computer is 1 1/2 yrs old and there were many updates from then til now. Maybe my 2012-004 worked because i had re-installed mail from my original dvd that came with my computer.
Going to the Genius is free, (but an appt. is necessary) and they ask each other if they do not know right off the bat, it worked great for me. Best of luck...

Can't shutdown iMac after 10.5.3 update

Updated to 10.5.3 yesterday. No problems there, problems started hours later when I tried to shutdown computer. No luck, black/grey spinning timer thing (not beach ball) just keeps spinning away. Only way to turn off computer is to hold power button down. I also can't start computer successfully unless I unplug my FW 800 My Book Studio Edition external hard drive.
Computer will sleep/wake without problem.

I have the exact same issue on my MacBook after upgrading a few days ago. I get that little "loop", and my MacBook just won't shut down until I hold down the power button. It never happened with 10.5.2. It's the only problem I'm having with the upgrade. I'm sure it's only a short term thing, as Apple usually fixes such things rather quickly. Even so, I hope they fix it soon.

Can't repeat songs after iOS 5.1 update

After updating my iPhone 4S with iOS 5.1, I can't put my playlists or songs on repeat or shuffle. None of the icons appear on the now playing screen. Even the Genius and Ping icons don't appear on my screen. I've tried everything including googling the answer and rereading the current iPhone 4S manual to no avail. If someone can help me, I would be very grateful for that assistance.

Sorry if you already knew this, but when you are playing a song you have to tap the cover art to reveal the additional controls (tapping again hides them).

Can't enable FIPS after 34.0.5 update

Similar Messages

Maybe you are looking for