Can't export files in XPPro

I just shelled out 30 duckets for the pro version to convert files to view in my new ipod nano. It will not convert files properly. The files are .flv type, when I click to export it opens box saying file already exists. then I check no to write a new file and it converts to a very small 60 - 80 mb file. I have tried every documented way from quick time and web advice and this will not convert a file.
I have found a free version after, I purchased the $30 version, and the free one works.

QuickTime can't work with Flash Video without third party software help.

Similar Messages

Can't export files

Post processing, I can't export files from the application to my hard drive. I keep getting this message " some problems ocured exporting your files" and gives me a list of all the files I was exporting. I also get just one option, to click "ok" how do you move files post processing, I'm using an iMac OSX 10.7.4. My LR4 is the trial version but I can't buy if it is not compatible with my system

Permissions?

Access 2013 - I can't export files to dBaseIV

Hi,
Access 2013 - I can't export files to sBaseIV, and i need this for mi job.
Can you help me please?
Thanks,
Regards

Thanks Dear!
Please, check my comment, may be can you help me.
See: http://jonwilliams.org/wordpress/2014/03/21/enabling-xbase-dbf-support-in-microsoft-office-access-2013/#comment-54026
Thank you so much.
Regards

Can I export files in mp3 format?

Can I export an audio file in the mp3 format?

http://help.apple.com/logicpro/mac/10/#lgcp8314da07

How can I export files from my ipod classic and reset it without losing content and syncing it to a new library?

I'm trying to export the files that exist on an ipod classic. It belongs to my girlfriend, and she doesn't want to lose any of the music on it. But she wants to sync to a new PC and not lose the content. So, I want to export all the files and then place those files plus start a new itunes library with it. If I were to sync to my PC, would it erase all of the existing data? Can I buy/download a program that would allow me to upload all of the existing content on her ipod classic to my PC and then take that and place it back on by syncing it through her new laptop and adding the exported files....?

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Can't export file as pdf?

trying to export idd cs6 file as pdf and get message "cannot save to the file... you may not have permission or the file may be in use. I tried closing the idd file but then cannot save -- catch 22!!!

In a situation where you cannot save the file and close it you can try and export to .idml (see Remove minor corruption by exporting) and if that also is unsuccessful, try a force quit on ID, then restart ID and hope the autorecovery works. You really haven't got anything left to lose at that point, and you have some chance for recovery on the force quit where cloing without saving loses all your changes.

Exporting files in Unicode

Hi,
I am using UTL_FILE.FOPEN_NCHAR and utl_file.PUT_line_NCHAR to write files in Unicode but instead it is exporting in UTF8 format, my database characterset is UTF8, it might be happening due to characterset.
Can i export files in Unicode rather in UTF8.
Thanks
Zubair

I think you must reverse the parameters it's destination first the source is optional
Regards
Etbin
Looking at 11g documentation: http://docs.oracle.com/cd/E11882_01/appdev.112/e25788/u_file.htm#autoId0
FOPEN_NCHAR Function
This function opens a file in national character set mode for input or output, with the maximum line size specified. You can have a maximum of 50 files open simultaneously. With this function, you can read or write a text file in Unicode instead of in the database character set.
Even though the contents of an NVARCHAR2 buffer may be AL16UTF16 or UTF8 (depending on the national character set of the database), the contents of the file are always read and written in UTF8. <font color="blue">UTL_FILE converts between UTF8 and AL16UTF16 as necessary.</font>
I'm not sure what the last statement means (no Database at hand to try it, besides the usual procedure is not to do it row-by-row but to obtain a clob which gets written out in 32767 byte chunks)
Edited by: Etbin on 26.2.2012 9:13

Can I Export to Text File?

hi,
can i export my ical events to a text file?
thanks.
samantha

I have figured out a way to do this with free available programs:
Download this program:
http://www.nirsoft.net/utils/faview.html
Faview will allow the bookmarks exported in html format to be saved as a text file. This text file is in a uniform state.
Open the text file with a spreadsheet program. I used the free program called spread32.exe that can be found anywhere on the internet.
Highlight all the columns and do a sort by Column A. The urls will now be in alphabetical order at the bottom of the spreadsheet. Cut and paste into a new text file.

How can I export a compressed mp4 file from iMovie (mavericks)?

Hello everyone,
I had just downloaded the new version of iMovie.
I'm very amazed to see that the funcion "Export movie with QuickTime" is not available.
I used this funcion to customize parameters of exported videos;
How can now customize parameters? I have to use another external software to produce mp4 files???
Thankyou for answers.
Gianmarco

If you use "Share" and choose 540P, 720P or 1080P it will be mp4, withH264 codec. You just have to once figure out what spefic settings (for example bitrates) are used with the defaults from iMovie 13 (look-up the exported files with info in Quicktime), and wether they are ok with you.
In the former version I already used automator to achieve some specfic settings for my web-video's, now I think I don't need that anymore.
The only way around as far as I know is the usage of QTPro7 or compressor. Export as 1080P and open the file with one of those apps.
HtH
Ben

How can i export a 24bit avi file from photoshop for mac?

how can i export a 24bit avi file from photoshop for mac? i have a client that specificly needs the files to be avi and in 24bit what are the settings that i need to use to export the video using photoshop on a mac?

Hello,
To make a 24-bit AVI file in Photoshop, go to File>Export>Render Video. Then, under File Options, choose AVI from the Quicktime Export drop-down menu. Click the Settings button. Click the Settings button in the AVI Settings window. Change Compression to None, and then choose "Millions of Colors" from the Depth drop-down under Compression.
The Millions of Colors option is for 24-bit video (8-bit R+G+B channels, 8x3=24). Millions of Colors+ is for 32-bit video (24-bit video plus an 8-bit alpha channel).
-Brett

How can I export an SD 16:9 self contained file from FCX?

Hi folks,
I'm playing with the trial. Used another thread to figure out how to import mts files (Loving the fact I don't have to clipwrap them!
Original footage is in HD - 1920 x 1080. Upon importing it looks like it converts to ProRes422 1440 x 1080 - is that correct?
Regardless, my client doesn't want blu ray. They want DVD and I used BitVice to compress mpeg2s (much better than compressor 3 for quality imho).
Plus, I don't want to pay for compressor 4 or x (whatever it's called).
I've tried Share - Export Media, but can't see any option for outputting to an SD file (720x480 16:9) ?
Thanks in advance for reading and possibly helping me out!
Cheers,
Keebler

Original footage is in HD - 1920 x 1080. Upon importing it looks like it converts to ProRes422 1440 x 1080 - is that correct?
No, that's not correct, but it depends on the exact type of HD media and your import settings.
You can't export to that without compressor 4. You'll have to export a ProRes master and take that to BitVice.

How can I export an Adobe illustrator CC .AI file to a DWG or DXF file suitable for SolidWorks?

Hi
Can anyone help?
How can I export an Adobe illustrator CC .AI file to a DWG or DXF file, without SolidWorks enlarging the file & converting every curve into hundreds of short little straight lines rather than a single continuous line/s.
I have made sure the file is ungrouped or has any compound paths or colours.
Opening it in Autocad 2010 still converts the DWG file into hundreds of short little straight lines!
The file is needed to laser cut out an aluminium shape using SolidWorks 2008 (Metal soft)?
Formats they can handle are:
DWG, DXF, IGES, IGA
There must be a way to export it without re-drawing the whole design in Soildworks again!!??
Can anyone help?
INCA

Not really. This is a limitation you will have to live with. Unless you are extremely careful, most paths will be converted to polyline segments by AI and in particular in AI CC this is somehow busted, so it happens more often. You might have much more luck opening a native AI file in DraftSight or a 2D CAD program like TurboCAD and exporting a DWG or 2D IGES/ STEP file from there. The sizing issue is a different matter, but without knowing what units you actualyl used, nobody can advise.
Mylenium

How can I export an edited image to a file?

I can't seem to find a way in iPhoto 09 do this. Can I export an edited image to a file, keeping the edits intact, or do I have to use a 3rd party editing app when I edit from inside iPhoto 09?
I would prefer to use iPhoto's editing tools so should I import previously cropped images into iPhoto? If yes, what file should I use? I was wondering if anyone does this on a regular basis and if there issues doing this.
I like the editing tools in iPhoto very much. In other apps I have always cropped, resized, corrected levels and a bit of color. I am not a power user by any means and I am close to doing this all in iPhoto if I could only export the edited image to a file.
The reason I want to do this is because the printing portion of my work flow is to upload files to my merchant who prints them and are ready for nearby pickup within an hour. This is all done at a very reasonable price and the color accuracy is very close.
Any advice would be greatly appreciated.
Regards,
Jim

You can edit from iPhoto by dragging to the desktop or exporting using the File -> Export command, setting the Kind to anything except original.
But you probably don’t need to:
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 Only*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and 10.5* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

HT2486 how can I export the contact book data to a csv file for editing?

how can I export the contact book data to a csv file for editing?

You can edit a card right in Contacts. No need to export and re-import.
Select a name and on the right side, click the Edit button:

Can i export an album from iphoto to a memory stick with the album title to identify the the file

I would like to put my photos as per album on to a memory stick, can this be done with the named albums, so I can highlight the album then open the chosen title and then select the chosen photo, I only have iphoto on my mac and have a 32GB memory stick, Hazel

If you want you can export the contents of that album via the File ➙ Export ➙ File Export menu option and select File Name = Use Album Name with Number and each photo will be exported with the Album Name as the file name followed by a sequential number, i.e. Album Name-01.jpg, Album Name-02.jpg, etc.
Then put them in a folder and drag the folder onto the memory stick.
OT

Can't export files in XPPro

Similar Messages

Maybe you are looking for