Can't get driver to work for HP Laserjet 1150 and Windows 7 laptop

windows 7 64 bit PS driver for Laserjet 1150 is looking for .inf file. Not in driver folder. won't connect to printer.
Help

For the 1415 you need to download an application that runs on your computer and then installs the new firmware in the printer. You can find that firmware program here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=4089468&
I hope this helps.

Similar Messages

Can't get itunes to work for windows xp 64 bit

I can't get itunes to work for windows xp 64 bit. It won't even download.

These are the Windows requirements according to the iTunes dpownload site http://www.apple.com/uk/itunes/download/http://:
Windows XP Service Pack 2 or later; 32-bit editions of Windows Vista, Windows 7 or Windows 8
64-bit editions of Windows Vista, Windows 7 or Windows 8 require the iTunes 64-bit installer
xp 64 bit is not mentioned but it doesn't seem to be supported for the latest ITunes so it seems that you're out of luck.

...I just bought this and i can't get it o work for me, I had noticed chat windows right up until I

..I just bought this and i can't get it o work for me, I had noticed chat windows right up until I Paid for it now I am left alone I need help. or my Money back. I knopw I am writing to no one.

Good day,
How can I help?
Kind regards,
David
Adobe Systems

Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

Hi jayhrab,
Currently, the system requirements listed for an Apple Thunderbolt Display are:
Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
OS X v10.6.8 or later
Apple - Thunderbolt Display - Read the tech specs.
Regards,
- Brenden

Can't get Extreme to work for me

I bought an Airport Extreme in May and just cannot get it to work for me. It most likely has to do with my settings as it seems complicated for me. My ISP refuses to help me other than providing me with some router/IP info. They claim they have had problems with Airport Extremes (anti-Mac) and do not know how to help me and I should contact Apple. My ISP also claims they have been successful with their few Mac clients using NetGear and they can help with that.
This is depressing to me because I am loyal Mac user and have never had problems with any Mac product. But I can't figure this one out on my own. I do not see phone support for the Airport Extreme and I feel exhausted by this.
Is anyone is willing to walk me (could be painful) through this or willing to buy my Extreme and I will concede to my pro-Windows ISP. In the end, all I want is one of my computers to be online wireless.
Sigh.
Jeanine
PowerMac G5, dual-2.0 ghz Mac OS X (10.4)

Hi Jeanine,
Don't assume that it is just a question of anti-Macness. There are legitimate reasons why an ISP (or a business) decides not to support this weird device. It goes against most of what is considered reasonable by the leading manufacturers, but hey, it's Apple. They usually don't care about that as long as they have loyal customers who still trust Apple.
I'd say that the critical settings are in the Internet tab. Assuming you have your computer connected to the airport using an Ethernet cable, and that you have the Admin Utility running, go to the Internet Tab and make sure that:
1. Connect using: Ethernet
2. Configure IP - It depends. You say that your ISP has given you some router/IP info. In that case, you need to choose "Manually" and enter all the fields following this setting. Otherwise, they might have told you that you will be assigned a DHCP address, and in this case choose "Using DHCP." The last two boxes ("Domain Name" and "DHCP ID") are usually not utilized.
3. For "Ethernet WAN Port" Automatic should suffice, but in my case, I had to force it to 100 Full Duplex or otherwise wouldn't work. Go figure!
4. For Connection Sharing, most probably you'll have "Share a public IP address" but if the ISP gives you a set of addresses, you may need to choose "Distribute a Range..." Not probable, though.
Leave the other two tabs as default, but make sure that your computer has DHCP enabled.
Following this steps won't give you a fully working wireless network (we have not configured anything yet) but at least should give you a working state for computers connected via Ethernet wire. We can take the next step then.
Good luck. This router (and the iPhone for similar reasons) are going to make may Apple loyal customers rethink future purchases. It has certainly happened to me.
Paco

Can't get Themes to work for movie using iMovie on ipad

I finsished a trailer using iMovie on my iPad successfully and LOVED it! Sooo fun!
Now I'm trying to make a movie for a friend's wedding, but I can't get it to work with the themes. When I select my theme and start a new project using a few pictures the theme music works when I replay, but no visual elements of the theme I selected show up (or available for selection). when I click on the gear wheel, it does show what theme I selected.... What am I missing???? The only place the theme shows up is on the tile in the "projects" section.
Then I tried the same thing on my iphone 4S (iOS7) and the same thing happens.
I looked at the tutuorials etc...and I think Im doing it right (after all, I got the trailer to work perfectly) and I think I'm not technologically challanged - but I just would like to have the theme visual elements to show up.
Please help
Mir

Tap the Transition points and choose the star icon. This is for theme associated transitions including their graphic elements.

Since i can't get Adobe to work for my games on ipad what do i do

I can't get Adobe to work on my IPAD, i get something that says Adobe and apple are having problems. Is there anything else i can use other than Adobe flash?

Flash is not supported on the iPad, and probably never will be.
Depending on what sites you are trying to access, you might find that some of them (probably more so if they are news sites) have their own apps in the App Store which might let you get some of the content that you want (and there is the built-in YouTube app). Also there are browsers such as Skyfire, iSwifter, and Puffin which 'work' on some sites - but judging by the reviews not all sites. If you want to play flash games then you are probably out of luck if you want to play on-line though the iSwifter app might work on some of them, but again some flash games have app versions in the store.

Can't get cnet to work anymore. Have uninstalled and reinstalled and it still doesn't work. Any suggestions?

Can't get cnet+ to work. Have uninstalled and then re installed and it still opens and then closes . Any suggestions ?

Your serial number is available form the Adobe website. Sign into your Adobe Account on the Adobe website and click on the My Adobe link at the top of the page. It will take you to a page to find ALL of your serial numbers for products you have registered.

Can't get printer to work for my life

kernel 2.6.25
printer: HP laserjet 4
usb
CUPS
Even if printer is on at boot, printer won't work.
This has happened before, and I can usually get it working after fiddling with it for 10-15 minutes, then it stops working promptly.
I had it working a few nights ago, now it has stopped again.
dmesg
input: Video Bus as /class/input/input6
usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x0557 pid 0x2006
usbcore: registered new interface driver usblp
sdhci: Secure Digital Host Controller Interface driver
What should the URI for a usb printer be?
USB is not an option for "Device for PrinterName" in the CUPS web interface
I can print from vbox on this machine, so this is slightly less urgent.
Last edited by Raccoon1400 (2008-06-18 23:07:06)

Raccoon1400 wrote:
There is no hub. The laptop has 2 ports on the front, 2 on the back, with the printer plugged into the back.
If it matters, this is a parallel printer, with a parallel to usb cable connecting it to the machine.
Now that we know the usb port number the printer is plugged into, we should be able to figure out the uri.
EDIT: lsubs shows the same whether printer is on or not.
An adapter, my mistake.
I had a parallel printer plugged into a USB port through an adapter for a while, and it exhibited the same behavior. My "solution" was to delete the printer and then recreate in CUPS. Sometimes the interface would reappear and sometimes it wouldn't.
Dusty started a thread about this a while back, and I was the last one to answer. Maybe you can get a hold of him and see if he had any success.

I bought a magic mouse today, they told it would work with the new iPad, I can't get it to work for me, does anyone know how or if it works?

I bought a magic mouse, was told it works with the iPad, how can I get it too?

A mouse, which is a pointing device, will not work with an iPad...there is no cursor for the mouse to move around. You must use the touch screen.

Can't get Flashplayer to work for Mac

I am having an issue with my Flashplayer. I recently thought it was specific to Firefox but it appears to be all browsers. I used to just crash all the time, but now I can actually no longer watch many videos, though youtube still appears to work. I have seemingly tried everything. Uninstalled and reinstalled, activated plugins, made sure they're up to date, etc. I have tried every suggestion I've found anywhere on the web and nothing has worked. I am growing quite frustrated. I am using Mac OS X Lion 10.7.
Any suggestions, I'd really appreciate it. Thanks.

I have no problem remembering where the album was saved...
apparently FW has problems finding it.
I think I have the problem solved - at least this one (I seem
to be having another one with saving to SPRY/HTML format).
I got the clue from another post. Apparently FW doesn't like
folder names with spaces and my site was buried pretty deep in the
directory structure. I copied the site to a location just under the
root of the drive and made sure there were no spaces in the folder
names so now it only has to look for DRV:/mywebsite/images and then
I export the gallery to DRV:/mywebsite/photo_gallery.
All the flash galleries seem to work fine but I'd like to
look at the SPRY/HTML gallery before I make a final decision which
to go with.
Al for FW defaulting to it's orignal program directory
everytime I go to look for an album I simply find it annoying...
thanks h,
al

Can't get audio to work for HD DVD

Anyone have any insight into what audio enoding works for HD DVD? I've tried both aiff and ac-3 to go along with MPEG2 video and my Toshiba HD A2 won't play back sound from either type. Help!

I have used both on the Toshiba A2. I assume the build file had sound when you tested it in the Apple DVD Player?
I have not played with the audio settings much on the Toshiba, do not know if there is a setting there that can change things.
I can take a look and run some tests to see if I can get it happening. Also if you like I can put together a small project to see if you can also get it to run.

Formscentral charged me twice for a yearly account. Can I get the money back for the second time (and be sure it wont' happen this month again ?

I got charged twice (the last two months) for a yearly account on formscentral. Can i get the money back ?

Here's a link to a procedure:
http://www.ehow.com/how_5590751_refund-itunes.html

Can't get Airprint to work with HP Laserjet Pro CM1415fnw

I'm recently purchased the Laserjet Pro CM1415fnw, but i can't find it in my iphone or ipad. evrythings were installed and configured properly even the latest firmware was installed. but still i can't find it in my devices.

Hello,
Thanks for the post. With this one, I've pasted a couple of links below that should assist. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02950715&cc=us&dlc=en&lc=en&product=4089468&tmp...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02623193&cc=us&dlc=en&lc=en&product=4089468&tmp...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02759940&cc=us&dlc=en&lc=en&product=4089468&tmp...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Can't get SSL to work for WebVPN

Hi all,
I'm trying to get webvpn setup, and have it all configured correctly.... but there seems to be a problem with the SSL part.
I can connect on port 80, it redirects to port 443... but never shows the login box, just keeps trying to load.
I can telnet to port 443 fine and i've disabled all other services using port 443 (like http secure-server).
The status is UP for the gateway and context. I've no idea what to do next. It appears to be trying, but not succeeding. I've tried different IPs, on different sides of the NAT. I've tried with loopback ip, ips on the VLAN, the public IP etc.
Please please help, here's some info...
MD1#sh webvpn gate MD
Admin Status: up
Operation Status: up
Error and Event Logging: Disabled
IP: 192.168.2.199, port: 443
SSL Trustpoint: SSLVPN
FVRF Name not configured
MD1#sh webvpn cont MD
Admin Status: up
Operation Status: up
Error and Event Logging: Disabled
CSD Status: Disabled
Certificate authentication type: All attributes (like CRL) are verified
AAA Authentication List: default
AAA Authentication Domain not configured
Default Group Policy not configured
Associated WebVPN Gateway: MD
Domain Name and Virtual Host not configured
Maximum Users Allowed: 25
NAT Address not configured
VRF Name not configured
MD1#sh webvpn install st svc
SSLVPN Package SSL-VPN-Client version installed:
CISCO STC win2k+ 1.0.0
1,1,3,173
Mon 12/11/2006 18:41:54.43
MD1#sh webvpn install st csd
SSLVPN Package Cisco-Secure-Desktop version installed:
CISCO CSD IOS
3,1,1,45
Mon 10/23/2006 11:18:00.42
Thanks
~Matt

PS: I've tried recreating the SSL certificate to no avail.
If i enable the https server for SDM etc, the SSL certificate works fine.

Can't get driver to work for HP Laserjet 1150 and Windows 7 laptop

Similar Messages

Maybe you are looking for