Can't get JCOP tools

Hi everyone,
I need to develop a Java Card application for NXP JCOP 21 - 36Kb cards. I don't have cards so far but want to look at JCOP API to ensure it is what I need and can work with.
However, it seems that I simply can't get JCOP from anywhere! I tried to download it from IBM and here's what I got it tools.zip:
As of July 1st 2007, all support activities for the JCOP operating system on NXP/Philips silicon will be serviced by  NXP Semiconductors.
Please email requests for the JCOP Tools to: [email protected]
As you may have guessed I wrote them to NXP. They don't reply for 4 days already. What am I supposed to do? Any ideas would be appreciated.
Thanks in advance.

Hi DomElion
Ive been researching extensively on java smartcard project for a while since I got involved in one such project very recently. Im a total newbie hence need some guidance regarding the same. Came across this posting and thought maybe I could get some help (which I desparately need now :(( )
Ive got SETECS 256k java smart card and a card reader. I installed java card 2.2, gpshell and java 6 (for smartcard IO). But sinct smart card IO can be used only to communicate with the card (and applets already on card) I still need java card kit and GPShell to install/load applets on the card. Hence Im now trying to understand the helloWorld applet loading given as example in the GPShell installation. But Im unable to understand few things in their script (which Im sure might be very basic and foolish of me to not understand that too :( ). But Ive successfully tried simulator, but I really need to write something and read it back from the "real" card !!
Request to please please help me understand how to write and read back using GPShell. For example this is the script provided as sample by GPShell
mode_211
enable_trace
establish_context
card_connect
select -AID a000000003000000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
delete -AID a00000006203010c0101
delete -AID a00000006203010c01
install -file HelloWorld.cap -nvDataLimit 2000 -instParam 00 -priv 2
getdata
# close_sc // Close secure channel
# putkey // Put key
// options:
// -keyind Key index
// -keyver Key version
// -key Key value in hex
card_disconnect
release_context
As seen above the line in bold is installing the helloworld on the card. But where is the AID assigned to it? What are the AIDs which are getting deleted? And what is the "select -AID a000000003000000" meaning?
Also now that I have the helloWorld on the card how can I read that applet back to return to me "hello world" using smartcard io or even java card 2.2?
Please please please please help !
Thanks so much
WAITING to hear back
Best Regards

Similar Messages

  • Build event announced that you can convert your android app to windows platform ! How can I get the tools to do it?

    From the build event I heard that you will be able to convert Android and iOS application to windows 10 phone platform! How can I do that ? Where can I get the tools ?

    Here you go!
    Universal Windows Platform Bridge for the Android Runtime:
    http://aka.ms/projectastoria
    Jeff Sanders (MSFT)
    @jsandersrocks - Windows Store Developer Solutions
    @WSDevSol
    Getting Started With Windows Azure Mobile Services development?
    Click here
    Getting Started With Windows Phone or Store app development?
    Click here
    My Team Blog: Windows Store & Phone Developer Solutions
    My Blog: Http Client Protocol Issues (and other fun stuff I support)

  • Where can I download JCOP tools and activate it

    as I have learned that :As of July 1st 2007, all support activities for the JCOP operating system on NXP/Philips silicon will be serviced by NXP Semiconductors.
    Please email requests for the JCOP Tools to: [email protected]
    It means that I have to request the JCOP Tools from the above mail and have no any other means?
    can you tell me other way to get the JCOP Tools, thank you very much!

    A guy from NXP explained to me that they need to follow export control regulations strictly as it is basically an U.S. product. The second thing is that most JCOP products are Common Criteria certified and this requires that also the simulation included in JCOP is handled under NDA. To remove JCOP Tools from all this constraints would mean that all crypto functionality is minimized to the same level as in Sun's Java Card development kit (tools + simulation).
    Maybe IBM had a smarter way of deailing with this or had a special deal with the U.S. customs, don't know.

  • I can't get my tool bar to get the return arrow or the forward arrow so i can browse. i have to quit the browser and start all over again everytime i go to another site and want to return. not on tool bar and get it on.

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/787149]''
    second time i have had to go through this, so here goes, i can't get the return or forward buttons on the tool bar and can't return to the website i am in have to quit the web site altogether and restart the firefox after viewing any site, as i have no return arrows or forward buttons on the toolbar.

    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • I have student CS3, can't get reshape tool to work as it says it will

    I select the points and/or segments with reshape tool, but when I click and drag it moves the entire path and not just the points I highlighted with the reshape tool.  Same with the white selection arrow = always moves the entire collection of paths because I can't get it to select just a portion.  Is there something I'm doing wrong?  I follow the directions exactly but there are several things that don't operate as described in manual.  Another example is the saved workspace.  It never brings back the color swatches I save onto my workspace - they're lost every time I close a file even though I save it per instructions.  Is this because it's a student version or is it user error?

    Yes
    On a closed path select the white arrow and click on the path not inside the path but on the path itself.
    That selects just that segment then you can reshape at will and when you go to another segment it will allow you to reshape that as well without reselecting the path.
    Again do not drag the white arrow or click within the path just click on a segment.
    If you draw the closed path with a shape tool then it is all selected so you have to delectit then select it withthe direct select tool clicking on the path segment.

  • Can't get Crop Tool to stay in Custom LR4

    I can't get the crop tool to crop in Custom mode. I unlock the lock and set to Custom and relock the lock. As soon as I begin the crop it reverts to Original. I've restarted. Any suggestions? Thanks!!

    Sound's right - you didn't change the aspect ratio before you locked it so it's still at the original aspect ratio.  Just unlock it and start dragging.

  • Can't get pencil tool into merge drawing mode

    I have downloaded the trial version of Adobe Executive Suite CS5. In the Flash Professional CS5 program I am trying to do a drawing with the pencil tool.  In the old version of Flash that I have (4.0) if I draw two lines that overlap, I can delete the line past the point where they cross.  In this version I can't do that.  It treats each line I draw as a separate item and won't combine them.  I notice the properties panel says I am in Object mode which would be the reason.  However I can't get it to go to merge mode, which is supposed to be the default.
    Is this because it's the trial version and not all features work in that version?  Or could there be some other reason?
    Thanks for any help anyone can offer.  My email address is [email protected] and I can be phoned at 541 782-5904 (Oregon).
    Ron Coleman

    Thank you.  I tried what you said and the button simply didn't respond.  However I was using the line tool or the pencil tool when I did this. I later tried using the rectangle tool and then it worked.  Once I got it switched back it stayed that way.  I appreciate your emailing me, it's so hard to get answers to problems with Adobe.  I had the old Flash program by Macromedia and I honestly believe it is easier to use than the new one.  But maybe that won't be so once I've spent more time with it.
    Thanks again.
    Ron Coleman

  • How can I get CS4 tools to work in Open GL?

    Facts--Bought CS4--installed fine--problem noted with pop up that my video card needed upgrading--looked on Adobe site for suitable video cards, talked with Dell--installed nVidia G9500 which I was told should solve all problems--reinstalled PHOTOSHOP CS4 number of times when subsequently program tools refused to work (example--clone brush shows area chosen but does not deposit chosen texture/color, brush won't put down color, etc)--found update for video driver and installed--CS4 tools worked for 5 min then stopped--repeated former steps of reinstalling. Talked with both Adobe and NVidia, each points the finger at the other. I'm a Photoshop professional and need this program for my work.
    I have multiple drive Dell XPS system, 4G RAM using WinXP32
    Any Windows/Photoshop genuises out there with answers that neither vendor can offer?
    Will be profoundly grateful!!!
    RL Sealey

    Did you go to the Nvidia website and download the newest drivers? You did say if it was a laptop or not. Here is the driver page for the card. Just run the driver update on the webpage again if you have a laptop.
    http://www.nvidia.com/object/winxp_196.21_whql.html
    Did you update CS4 to 11.0.1?

  • Can't get my tools to work in photoworks

    Having touble with some of my tools in photoworkshop (CS4), like the blur tool doesn't respond, making it very difficult to do touch ups. Any ideas? Should I uninstal, then reinstal?

    harry&bella wrote:
    Having touble with some of my tools in photoworkshop (CS4)
    What product is "photoworks" or "photoworkshop"?
    You really need to take the time and make the effort to be accurate.  "Close enough" doesn't have meaning; things need to be exact.  Yes, I know you're talking to people here, and we can all figure out that you mean Photoshop, but if you apply the same looseness to your computer work you will mess things up more than make them work.
    What do you mean by "the blur tool doesn't respond"?  We are not mind readers.
    Did you mean, "I select the Blur Tool from the tools panel, then stroke it on my document, but it doesn't seem to blur anything"?
    Curt's suggestion would fix it, but the reason you've gotten into the condition you have is probably because you have not got the Strength or Mode set properly in the Options bar:
    -Noel

  • Can I get Google tool bar that is compatible with Firefox 8

    Window7 Professional 32 bit running Firefox 8.
    When I try to download ? latest version of Google toolbar I get a message to say it is not compatible

    My main need for the Google Toolbar is to use the synchronized bookmarks that I can access from anywhere. I am required to use Firefox at work, so unless I can get the toolbar for Firefox I will not have access to my bookmarked.
    Is there anyway to be able to access the Google bookmarks in Firefox without the toolbar?

  • Where can i get a tool kit to open my macbook pro and install my RAM?

    thanks for to ever helps me.

    OWC / MacSales sells the tools you need, as well as memory that will work.
    If you did not purchase your RAM from OWC, Crucial, or Apple, don't bother opening its case. You might as well return it right now because most manufacturers don't sell memory that meets Apple's stringent specifications.

  • Can't get google tool bar with firefox 5. How do I get it?

    Down loaded Firefox 5.
    Went to Google to add tool bar and said not available to have a google tool bar with 5 version.

    Press and hold the Sleep/Wake button and Home button for 10 seconds.  Does it power on?    

  • Some how ive lost my firefox tool bar. i cant get to my bookmarks. ive re-installed without effect. how can i get the tool bar back?

    i have no more details. the tool bar is not there.

    * In Firefox 3.6 versions on Windows and Firefox 4 on Windows and Linux it's possible to hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu of a toolbar.
    * Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
    * Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
    See also:
    * [[Menu bar is missing]]
    * http://kb.mozillazine.org/Toolbar_customization

  • Can't get the tool to clone

    my spot fix tool will fix dust spots but will not allow me to select an area to clone? there is always an  error when I select the source I want and click. source area undefined!
    Message was edited by: sunriser95

    What version of Aperture?
    Are you holding down the Option key when clicking the source point?
    Full directions for Aperture 3 are here.
    Note at the top of that page the highlighted section "Which Adjustment should you use?".

  • Why can't I get Pro Tools LE to create a session on my new iMac?

    Summary
    I can't get Pro Tools LE to open a session on my brand new iMac.
    Detail
    Pro Tools launches but when I go to create a session it seizes up, the beach ball spins and I have to Force Quit and send yet another note to the Apple teacher. It does this without fail. I've tried to rectify this by saving to different locations and different external hard drives. The problem remains the same.
    I've tried uninstalling/reinstalling, stripping the computer of anything that says "digidesign," etc... it doesn't work.
    I am using the same Pro Tools with the same OS and the same Digidesign hardware on a MacBook Pro without a problem. Go figure.
    _*The Kit*_
    _The Troubled Computer_
    iMac
    Version: OS X 10.6.1 Snow Leopard
    Processor: 2.66 GHz Intel Core 2 Duo
    Memory: 4 GB 1067 MHz DDR3
    Startup Disk: Macintosh HD
    _The Untroubled Computer_
    MacBook Pro
    Version: OS X 10.6.1 Snow Leopard
    Processor: 2.4 GHz Intel Core 2 Duo
    Memory: 2GB 667 MHz DDR2 SDRAM
    (the previous model - all aluminium)
    _The Digidesign Interface_
    MBox2 / USB connection
    _The External Hard Drives_
    iMac: Maxtor One Touch 4 Plus 600GB / FW800 > FW400 with a converter
    MacBook Pro: Maxtor One Touch 4 Plus 750GB / FW400 > FW400
    _The Pro Tools LE Software_
    Pro Tools LE 8.0.3
    I know what you're thinking... Snow Leopard is the problem. Right?
    But the MacBook Pro has proven that theory wrong. The marriage between SL and LE8 on that notebook works fine.
    As for LE on the iMac... At first it was 8.0.1 but now it is 8.0.3.
    I upgraded to the supposedly Snow Leopard compatible Pro Tools LE 8.0.3 (pre-release) thinking that just maybe SL and LE8 weren't having as much fun together in the iMac bed as they were in the MacBook Pro. The result was identical -- stuck in Nowheresville.
    I've been to the Digidesign discussion boards and the best I've been told so far is that my 3 day old iMac is a dud. On the other hand, away from Digidesign intoxication, some of the pros in the biz around town have said it's probably Pro Tools. Pro Tools they say is, at best, troublesome.
    I'm planning on bailing out of Pro Tools altogether eventually and moving to an Apogee Duet with Nuendo 4 as I'm annoyed that I spend more time as an amateur paint-by-numbers technician than actually doing the job I'm paid to do. I'm also unhappy with expensive upgrades, lost paid for plugins due to upgrades and being railroaded into buying Avid gear only as demanded by the software.
    But, in the meantime... I'm stuck with it. My own suspicions are that the cause of my troubles is the external hard drive and the FW400>FW800 conversion configuration but I'm not about to blow a few hundred bucks for a new hard drive based on a hunch that may not work. Your thoughts?
    Any suggestions other than anything that involves screwdrivers and a cavalier mindset with the just out of the box hardware by a complete novice such as I are most welcome.
    Thanks.

    Hi
    I have the same problem.
    First I tried PT8LE 8.0 - didn't even start, afterwards i tried 8.0.3pr (1.25GB) - the same result. Now I downloaded the 8.0.3 normal (1.6GB) and it starts, but after I get to open/create new session dialogue box it just gives me the beach ball of death...
    When I force quit PT it won't even start again and gets stuck at loading plugins (and there are just the bundeled one, no third party - it's a clean install of the whole machine).
    I too have a week old 27" imac i5 with 10.6.2. On my old 24" with 10.6.1 it's runnig smoothly.
    My external drives were off during this so I guess it's not a thing of the FireWire ports.
    So I guess it's nothing positive or helpful, but You're not alone with this

Maybe you are looking for