Can't hide text field label..only text field

I'm trying to display text field boxes on a form to fill out when a box is checked. I'm able to do this for the actual text field, but can't figure out how to hide then show the associated text field label. Can you tell me what I'm doing wrong?
Thanks!
var nHide =
event.target.isBoxChecked (0) ? display.visible:display,hidden;
this.getField ("Name").display = nHide; this.getField

First of all, you're using Acrobat JavaScript in an XFA form, which doesn't work.
LiveCycle Designer has its own interpretation of JavaScript, which is different to Acrobat.
There is also a second scripting language called FormCalc available.
Its syntax is much easier to learn and is matches perfectly to manipulate XFA forms.
Check the help (F1 button) in Designer to get the Designers scripting guide.

Similar Messages

Merge field label of two fields in ALV report

Hi,
Greetings of the day !!
I have a requirement to create a ALV report and the alv report has three fields(say F1, F2, F3). Where F1 and F2 fall under same category and i need to have single field label for both these fields.
How can I merge the field label of the fields F1 and F2?
Pl. share your knowledge regarding this.
Thanking you.
Regards,
Raghu

Hi Jodeswara Rao,
I need to display a ALV report with fields F1, F2 and F3. But F1 and F2 should have same field Label.
Header 1
Header 3
F1
F2
F3

Can a workflow e-mail notif. only show fields that have changed?

I'd like to send an e-mail to an end user whenever any field in a Solution has changed. The e-mail notification workflow for my Solution works and starts out like this:
(PRE('<ModifiedDate>') <> [<ModifiedDate>]) AND...
However, I run into max character limitation in the e-mail message body. (will look at ToChar next) What I tried to do was display the new and previous values for the fields. This worked till I reached the char limits. Even if I could key in all the lines of characters necessary for this, the mail recipient would have to carefully go through all the fields and compare them to see which one(s) has changed. This takes too much time for the end user to do.
Is there I way (using a single workflow) to display in an e-mail only the fields that have changed? I've looked through the posts and have not yet found an answer. Thanks.
Edited by: user11167975 on Jun 16, 2009 1:34 PM

You can resolve this by creating One workflow for each field or a small group of fields you want to track. Only thing is the user may receive more than one email reguarding the same Solution.

Can't hide the content in a text msg!! Help??

Each time I receive a new text msg it is open for anyone to see! I turned on the passcode feature but then I have to unlock it each time I want to do anything on my phone! If someone is talking on my phone for example, and I get a text msg, all that person has to do is look at the phone w/o touching anything and they are able to read the message! It would be great if it only showed that you had a new text or maybe who it was from...but not the actual message!! Can anyone help with this? Every phone I have ever had in the past allows you to "hide" your messages! Also, it would be nice if you could save parts of the "conversations." Individual messages!

Actually, I have put a lock on the SMS preview option and selected 0 words to view but that only had an effect on the emails that I received and not the text messages??? It would make sense that if you can change it in the emails previews that you also could in the text messages!! When the phone is locked it does only show the number but if it is unlocked it still shows the whole text! You would have to lock it each time you sent and received a text to keep it from being visible!! What a pain!!

How can i hide a portion of the text inside a spry dataset "stackedcolumn"?

Hi all
I have a spry dataset set up reading a .xml file for the price/name/description/etc. I want to only show some of the text (a certain number of characters) at the start then give the visitor the option of clicking a toggle button to see more of the description and help with size of the pages. How do i do that exactly?
I know I have to probably implement jquery toggle but how does it work with a spry?
here is the code as it stands.
   <div spry:region="catalog" class="SpotlightAndStacked">
      <div spry:repeat="catalog" class="SpotlightAndStackedRow">
        <div class="SpotlightContainer">
          <div class="SpotlightColumn"><a href="_images/catalog/Art/{Picture_File}" title="{Headline}"><img src="_images/catalog/thumbs/Art/{Picture_File}"></a></div>
        </div>
        <div class="StackedContainer">
          <div class="StackedColumn"> {Item_Last_Name}, {Item_First_Name}</div>
          <div class="StackedColumn"> {Item_Code_Number}</div>
          <div class="StackedColumn"> {Headline}</div>
          <div class="StackedColumn"> {Complete_Description}</div>
          <div class="StackedColumn"> {Item_Code_Number}</div>
          <div class="StackedColumn"> <strong>Retail price: {Retail_Price}</strong></div>
        </div>
        <br style="clear:both; line-height: 0px" />
      </div>
    </div>
Thanks in Advance

There are many options for editing objects/layers in the time line. You can split tracks, slip videp, trim, delete, cut, copy and paste etc. Without more specifics about what you want to do I would suggest you review the users guide. Select help to open the manual and then go to Timeline>Edit objects in the timeline. I am sure you will find the answer to your question.

When creating a fillable PDF form can I add a password to only selected fields?

I am creating a fillable form which will require data entry from several different people before being returned to my office. There are certain fields on the form that need to be restricted to personnel in my office only. I have tried to accomplish this restriction many different ways but have been unsuccessful.
The closest I have come to accomplishing this restriction is by adding a "For HRO Only" button which I can use to hide certain fields from personnel outside of my office and unhide the text field when the button is clicked. This would be perfect if I could add a password to the button. Unfortunately this is either not possible or I haven't figured out how to do it which means that personnel outside of my office can still access the fields with a click of a button.
The only other way I have thought of to accomplish this restriction is to mark those fields as "read only" but it seems as though it would be very time consuming for personnel in my office to complete the form due to the fact that they would have to open "edit form", open the properties for each field requiring their input, and uncheck "read only" for each one.
Any help/options/ideas you can provide will be greatly appreciate. Thank you!

Thank you so much for the quick response. This will be a huge help! I hate to be a bother, but can you tell me the steps to create the script or give me a reference/resouce to use? I have used adobe products quite a bit, but this is my first time creating a PDF Fillable Form that will be distributed for use by several people so I am a little lost.
Also, I seem to be running into one more problem that I am hoping you can help me figure out. On the form there is a question for the recipient to answer by checking one of two boxes, yes or no. Depending on the answer an action is initiated. This feature works perfectly, however the issue is that when the recipient choses "yes" he/she is directed to fill out four additional fields that I currently have set as "required", but when the recipient choses "No" the four additional fields are hidden yet still required. This becomes an issue when the recipient has completed the form and tries to submit the form. An error message pops up notifying the user there are required fields that are empty and must be completed before submission.
My thought is (in a perfect world) one of these two options would be ideal:
1. When the "No" option is chosen the four additional fields are changed from required to not required, or
2. When the "No" option is chose the four additional required fields are autopopulated with NA.
Either remedy would work just fine, however I am open to suggestions... Again thank you so much for your help with my previous question and thank you in advance for any information/help/advice you can provide in regards to my second question.

IPhoto 9.6 - slideshow to movie - text slides show only text and no image

Made slideshow in iPhoto 9.6. Runs fine in slideshow mode on my iMac. However, when I export it to my desktop as a movie, slides that I inserted text via the text slide feature (bottom right of iPhoto) - black with the text only - lost the image. This happens on most of the text slides. followed similar procedure before w/ no issues.

Made slideshow in iPhoto 9.6. Runs fine in slideshow mode on my iMac. However, when I export it to my desktop as a movie, slides that I inserted text via the text slide feature (bottom right of iPhoto) - black with the text only - lost the image. This happens on most of the text slides. followed similar procedure before w/ no issues.

How can I modify / update T002C's only one field

Hi everyone ;
I would like to write dialog programing code. After I am writing call screen screennumber, I would like to generate a design in screen painter.But screen painter doesn't open. There is an error.
Error says ' EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'#' and I search about this error. I solve the problem. Solution is T002C table's secondary language field must be writing , not empty.
When I would like to update the field's of T002C tables sap is giving an error. Error is 'Table maintenance not allowed for table T002C'.
How can I modify the field's of table T002C?

dont know about the stock taking object but may be the grpo object would help
HTH
Message was edited by:
Manu Ashok

Copying an internal table data to a field symbol(only corresponding field)

Hi,
   Iam having field symbol type standard table which has 4 fields in it already.
I am having an internal table which has 10 columns in it.
Now i want to copy the data from internal table to field symbol .But the problem is the fields which are matched in field symbol alone should be copied from the internal table.
for eg.
field symbol type table.
field1.
field2.
field3.
itab type internal table.
field1
field2
field3
field4
field5
field6.
i want to copy the first 3 fields alone from the internal table itab to the field symbols. Can anyone help me on how to do this. thanks...
Regards,
Rose.

Hi,
Chk below example, and match with ur scenario.
data: begin of itab,
      a , b ,c , d,e,
      end of itab,
      wa like itab,
      jtab like table of itab,
      begin of fsy,
      a, b ,c,
      end of fsy.
field-symbols:<fs> type any.
     assign fsy to <fs>.
     wa-a = 'x'. wa-b = 'y'. wa-c = 'z'. wa-d = 'r'.
     append wa to jtab.
      loop at jtab into wa.
        move-corresponding wa to <fs>.
      endloop.
REGARDS,
SENTHIL KUMAR.S

Hide/ Show Field Labels

On my form I have field labels that are part of base layer and set like below
Last Name____________________________________________________
Is there any way have them show and hide when their associated fields hide/show? or hide when printing them adobe or adobe reader?

Acrobat has an option to print only form fields.
Reader does not have this feature.
It is also possible to cover the field labels with form fields that have a fill color and only appear on the printed output.
You might want to learn more about the PDF format and forms. There are many free references about the PDF format and forms.

Changing Field Labels of module pool screen dynamically

Hi All,
Can anybody tell me how to change field label of text field in dialog screen dynamically.
The Screen/Transaction is standard one.
I have created a Enhancement point for this change in one of PBO module's subroutine for this screen.
This Field label is defined as a 'Text' field only. We can't change it any more as it is standard one.
Can anybody tell me the solution for the same.
I have to change this label value as per some validations and its corresponding text field value will remain as is.
Thanks,
Deep.

Hello,
I think it is not possible, but try changing the name by Looping on screen table on PBO,
Bye
Gabriel

What is Field Label ? and where do we use it .

What is Field Label ? and where do we use it .

Hi,
You can assign text information to a data element with the field labels.
The field labels are used to display a screen field. You can copy structure components and table fields from the ABAP Dictionary to the input template when you define a screen in the Screen Painter (Get from Dict. function). You can also assign a field a field label that is derived from the data element of the field.
The text of the field label can be translated centrally with the translation tools. The text is then displayed in the input template in the users logon language.
Short, Medium and Long Field Labels
Keywords of different lengths for identifying screen fields. Since the space available for such texts depends on the input template, you can define the text information in three different lengths.
A maximum length must be assigned for each field label. It is the upper limit for the lengths of all translations of the given text. The maximum length of the field label therefore should be somewhat longer than the given text in the original language.
Headers
This text is used as a column header when you output the contents of fields as a list in the Data Browser. It can also be assigned to a field in the Screen Painter.
A maximum length must also be assigned for the header. It is the upper limit for the lengths of all translations of the header. Choose the maximum length of the header to be somewhat longer than the given text in the original language. Also note that the header is often displayed above the corresponding column when preparing list output. The length of the header therefore should not exceed the length of the data element.
Short Field Label
Definition
One of the following:
- Short field label
- Medium field label
- Long field label
Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
Medium Field Label
Definition
One of the following:
- Short field label
- Medium field label
- Long field label
Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
Long Field Label
Definition
One of the following:
- Short field label
- Medium field label
- Long field label
Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
Heading
Definition
One of the following:
- Short field label
- Medium field label
- Long field label
Can be assigned as prefixed text to a screen field referring to the ABAP Dictonary. The text is displayed on the screen in the logon language of the user (if the text was translated into this language).
A heading can be defined to output the field values in lists. This heading is automatically included in the list header row, in the logon language.
Thanks,
Reward If Helpful.

Data Merge: Field Label control

Hello -
I am having a good time with DataMerge, except for one thing.
I am creating a document with multiple records per page.
That's fine - I understand how to do this.
However, I would like to have the field labels only appear ONCE per page - ie, at the extreme left
Right now, the field labels appear repeatedly, for each record.
Is there a way to put them in a margin, or another layer or something????
If this cannot be done by InDesign's merge, do you know of any alternative way to do this, or if InData can do it?
Thank you -
Marion

Very very clever -
and easy, although it would be great if I could place them on the master before the merge in a separate layer, and disable that layer prior to merging, and enable it after merge.
Thank you Peter.

Field Label in ALV Header

Hello
Is there a way to use the field label in the header of a ALV grid?
I am currently using a hard coded solution, and i know it's not good.
form buildfieldcat .
clear wa_fcat.
refresh it_fcat.
wa_fcat-col_pos = '1'.
wa_fcat-tabname = 'KNA1'.
wa_fcat-fieldname = 'KUNNR'. " I want to use the field label of this field in the header...
wa_fcat-seltext_l = 'Customer Number'. " ...To not use this line.
wa_fcat-outputlen = 15.
wa_fcat-key = 'X'.
wa_fcat-no_zero = 'X'.
I hope my query was clear. Thanks a lot!

Hi,
If you want header columns from Dictionary field labels, instead of hardcoding, you can follow what fellow SDNs mentioned.
Here is the solution.
<li>define internal table like this.
TYPES:
      BEGIN OF t_mard,
       werks TYPE mard-werks,
       lgort TYPE mard-lgort,
       matnr TYPE mard-matnr,
       insme TYPE mard-insme,
       einme TYPE mard-einme,
       speme TYPE mard-speme,
      END OF t_mard.
DATA:
      w_mard TYPE t_mard.
DATA:
      i_mard TYPE STANDARD TABLE OF t_mard.
<li>Buidl fieldcatalog internal table like below . It works
PERFORM build_fcat USING:
        "Field   Int Tab ref field ref table
        'WERKS' 'I_MARD' 'WERKS'    'MARD',
        'LGORT' 'I_MARD' 'LGORT'    'MARD',
        'MATNR' 'I_MARD' 'MATNR'    'MARD',
        'INSME' 'I_MARD' 'INSME'    'MARD',
        'EINME' 'I_MARD' 'EINME'    'MARD',
        'SPEME' 'I_MARD' 'SPEME'    'MARD'.
*&      Form BUILD_FCAT
FORM build_fcat USING l_field l_tab ref_field ref_tab.
w_fieldcat-fieldname     = l_field.
w_fieldcat-tabname       = l_tab.
w_fieldcat-ref_fieldname = ref_field.
w_fieldcat-ref_tabname   = ref_tab.
* w_fieldcat-seltext_m    = l_text.
APPEND w_fieldcat TO i_fieldcat.
CLEAR w_fieldcat.
ENDFORM.                    " BUILD_FCAT
<li> You can check program [here|http://hr-abap-freeeducation.blogspot.com/2008/04/alv-list-display_17.html]
I hope that it solves your problem.
Thanks
Venkat.O

Problem with field label

Hello All,
I am having a strange problem with field label? I have created a table with three fields one is MANDT and and the remaining fields as PATID and PATNA.
I am maintaining the field label for these fields, but still i am not getting the names of the fields while i am calling the structure in my alv tree.
I d'nt know what is the problem here?
can any one tell me how can i solve this issue?
Regards,
Lisa

Hi lisa,
This is not the problem with Data Dictionary,
While declaring the fieldcatalogue for thr GRID.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE              =
   I_STRUCTURE_NAME             = 'ZTABLE'
I_CLIENT_NEVER_DISPLAY       = 'X'
I_BYPASSING_BUFFER           =
CHANGING
    ct_fieldcat                  = gt_fieldcat
EXCEPTIONS
INCONSISTENT_INTERFACE       = 1
PROGRAM_ERROR                = 2
OTHERS                       = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
If gt_fieldcat-fieldname = 'PATID'.
gs_fieldcat-ref_field = 'ZTABLE'.
modify gt_fieldcat from gs_fieldcat.
clear gs_fieldcat.
endif.
Because while calling the FM it is populatinh the fieldname
so you need to modify the fieldcatalogue with fieldname then it will pick the field labels from the Dictionary.
Hope this will solve your problem.
Regards,

Dynamic Field Label

Hi,
In the Lead application <b>appl=CRMD_BUS2000108&blview=MKT_LEAD_M</b> , in the tab General using the structure <b>CRMT_BSP_LEA_OVERVIEW</b> , the meaning of the field PARTNER_NUMBER_2 is indicated by the field PARTNER_FCT_DESCRIPTION_2.
How can I show the PARTNER_FCT_DESCRIPTION_2 as the field label of the field PARTNER_NUMBER_2, instead of the default label from data dictionary of the field, when it is displayed as a form?
Regards,
Tony

Hi Przemyslaw,
Thanks for your hint!
Making the PARTNER_FCT_DESCRIPTION_2 looks like a field label by showing as a no label textfield is an interesting solution. However, during new lead creation, this field is empty and making the screen weird. It makes this solution is not a good solution for user.
Finally, I simply show the PARTNER_NUMBER_2 with the field label renamed, although this is also not a perfect solution.
Regards,
Tony

Can't hide text field label..only text field

Similar Messages

Maybe you are looking for