Merge field label of two fields in ALV report

Hi,
Greetings of the day !!
I have a requirement to create a ALV report and the alv report has three fields(say F1, F2, F3). Where F1 and F2 fall under same category and i need to have single field label for both these fields.
How can I merge the field label of the fields F1 and F2?
Pl. share your knowledge regarding this.
Thanking you.
Regards,
Raghu

Hi Jodeswara Rao,
I need to display a ALV report with fields F1, F2 and F3. But F1 and F2 should have same field Label.
Header 1
Header 3
F1
F2
F3

Similar Messages

Field description in two line in ALV report

Hi ,
In ALV report I want the description for each field to be displayed in two lines . For example
the description for field matnr is " Material No for grade A " which is displayed in one line . But i want to display it as : Material No
for grade A
in two lines . Is it possible . Please help me out .
Neetesh

Hi Neetesh,
Its not possible to display as you like in 2 lines header for single column. But i can provide the alternative way , it won't good logically. Please try the following logic.
Let suppose you have 10 fields F1-f10. Each field has the 2 lines header. So take 20fields in your fields catalog ie take 10 dummy fields which are equal lenght of the fields F1-f10. and for the last 10 fields(F11-F20) set the row pos as 2, set the second line header to these field(F11-F20). So you will succed to display the 2 level header for single column. But the problem here is you will get one empty row additional row for each row. Because you have taken (F11-F20) fields are dummy and don't have the data also. This solution will works only in the case of ALV List display not in Grid Display.
But Before that tell to your customer about this problem , Because I have done the same things when my customer giving important to 2 lines header and he accepeted that also.
If suppose you have the data in 2 lines for each column then this solution will work fine. Thats what i implemented in my ALV Report.
Warm Regards,
Vijay.

How to display two lables in alv report

Is there any chance to display two lables in alv report
for example..
AMOUNT
Rs | Ps
|
like that this for an example.
thanks,
JB

Hai Babu
Go through the following Code
using Classes & Methods
try with the following Code( Just copy the code & try with in SE38 Tcode & Execute it that all)
REPORT ZALV_SALES_HEADER_DETAIL MESSAGE-ID Z50650(MSG) .
TABLES
TABLES: VBAK . "SALES DOCUMENT HEADER
DATA OBJECTS DECLARATION
DATA: IT_VBAK TYPE STANDARD TABLE OF ZVBAK_STRUC,
IT_VBAP TYPE STANDARD TABLE OF ZVBAP_STRUC,
GS_LAYOUT TYPE LVC_S_LAYO,
GS1_LAYOUT TYPE LVC_S_LAYO,
GRID TYPE REF TO CL_GUI_ALV_GRID,
CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
VBAK_CONTAINER TYPE REF TO CL_GUI_CONTAINER,
VBAP_CONTAINER TYPE REF TO CL_GUI_CONTAINER,
WA_VBAK LIKE LINE OF IT_VBAK,
WA_VBAP LIKE LINE OF IT_VBAP,
SPLITTER TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
TOP_OF_PAGE_CONTAINER TYPE REF TO CL_GUI_CONTAINER,
GRID_VBAP TYPE REF TO CL_GUI_ALV_GRID,
TOP_PAGE TYPE REF TO CL_DD_DOCUMENT,
FLAG(1).
*"EVENT RECIEVER CLASS DEFINITION
CLASS LCL_EVENT_RECIEVER DEFINITION DEFERRED.
DATA: OBJ_EVENT TYPE REF TO LCL_EVENT_RECIEVER.
SELECTION-SCREEN
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN.
PARAMETERS: P_VBTYP LIKE VBAK-VBTYP DEFAULT 'C'.
SELECTION-SCREEN: END OF BLOCK B1.
CLASS DEFINITION AND DECLARATIONS
CLASS LCL_EVENT_RECIEVER DEFINITION.
PUBLIC SECTION.
EVENTS:DOUBLE_CLICK,
TOP_OF_PAGE.
METHODS:HANDLE_DOUBLE_CLICK FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW .
METHODS: HANDLE_TOP_OF_PAGE FOR EVENT TOP_OF_PAGE OF CL_GUI_ALV_GRID.
ENDCLASS. "LCL_EVENT_RECIEVER DEFINITION
CLASS LCL_EVENT_RECIEVER IMPLEMENTATION
CLASS LCL_EVENT_RECIEVER IMPLEMENTATION.
METHOD: HANDLE_DOUBLE_CLICK.
READ TABLE IT_VBAK INDEX E_ROW-INDEX INTO WA_VBAK.
PERFORM FETCH_ITEM_DETAILS USING WA_VBAK.
PERFORM ALV_GRID.
ENDMETHOD. "HANDLE_DOUBLE_CLICK
METHOD: HANDLE_TOP_OF_PAGE.
CALL METHOD TOP_PAGE->ADD_TEXT
EXPORTING
TEXT = 'SALES HEADER & ITEM DETAILS'.
CALL METHOD TOP_PAGE->DISPLAY_DOCUMENT
EXPORTING
PARENT = TOP_OF_PAGE_CONTAINER.
ENDMETHOD. "HANDLER_TOP_OF_PAGE
ENDCLASS. "LCL_EVENT_RECIEVER IMPLEMENTATION
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
IF S_VBELN IS NOT INITIAL.
SELECT COUNT(*)
FROM VBAK
WHERE VBELN IN S_VBELN.
IF SY-DBCNT = 0.
MESSAGE E000 WITH 'NO TABLE ENTRIES FOUND FOR LOW KEY SPECIFIED'.
ENDIF.
ENDIF.
START-OF-SELECTION.
START-OF-SELECTION.
PERFORM FETCH_SALES_HEADER_RECORD.
PERFORM CREATE_CALL. "CREATION OF OBJECTS & CALLING METHODS
END-OF-SELECTION.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'ZSTATUS'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Form FETCH_SALES_HEADER_RECORD
text
--> p1 text
<-- p2 text
FORM FETCH_SALES_HEADER_RECORD .
SELECT
VBELN
AUDAT
VBTYP
AUART
AUGRU
NETWR
WAERK
FROM VBAK
INTO CORRESPONDING FIELDS OF TABLE IT_VBAK
WHERE VBELN IN S_VBELN
AND VBTYP = P_VBTYP.
ENDFORM. " FETCH_SALES_HEADER_RECORD
*& Form CREATE_CALL
text
--> p1 text
<-- p2 text
FORM CREATE_CALL .
IF CUSTOM_CONTAINER IS INITIAL.
CREATE OBJECT CUSTOM_CONTAINER
EXPORTING
PARENT =
CONTAINER_NAME = 'CUSTOM_CONTAINER'
STYLE =
LIFETIME = lifetime_default
REPID =
DYNNR =
NO_AUTODEF_PROGID_DYNNR =
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
CREATE_ERROR = 3
LIFETIME_ERROR = 4
LIFETIME_DYNPRO_DYNPRO_LINK = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT SPLITTER
EXPORTING
TOP = 5
PARENT = CUSTOM_CONTAINER
ROWS = 3
COLUMNS = 1
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD SPLITTER->GET_CONTAINER
EXPORTING
ROW = 1
COLUMN = 1
RECEIVING
CONTAINER = TOP_OF_PAGE_CONTAINER.
CALL METHOD SPLITTER->GET_CONTAINER
EXPORTING
ROW = 2
COLUMN = 1
RECEIVING
CONTAINER = VBAK_CONTAINER.
CALL METHOD SPLITTER->GET_CONTAINER
EXPORTING
ROW = 3
COLUMN = 1
RECEIVING
CONTAINER = VBAP_CONTAINER.
CREATE OBJECT GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = VBAK_CONTAINER
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
GS_LAYOUT-GRID_TITLE = 'SALES HEADER DETAILS.'(100).
CALL METHOD GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME = 'ZVBAK_STRUC'
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
IS_LAYOUT = GS_LAYOUT
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
IT_OUTTAB = IT_VBAK
IT_FIELDCATALOG =
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
CREATE OBJECT OBJ_EVENT .
SET HANDLER OBJ_EVENT->HANDLE_DOUBLE_CLICK FOR GRID.
SET HANDLER OBJ_EVENT->HANDLE_TOP_OF_PAGE FOR GRID.
CREATE OBJECT TOP_PAGE
EXPORTING
STYLE = 'ALV_GRID'
CALL METHOD TOP_PAGE->INITIALIZE_DOCUMENT.
CALL METHOD GRID->LIST_PROCESSING_EVENTS
EXPORTING
I_EVENT_NAME = 'TOP_OF_PAGE'
I_DYNDOC_ID = TOP_PAGE.
CALL SCREEN 100.
ENDFORM. " CREATE_CALL
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form FETCH_ITEM_DETAILS
text
--> p1 text
<-- p2 text
FORM FETCH_ITEM_DETAILS USING WA_VBAK TYPE ZVBAK_STRUC .
SELECT
VBELN
POSNR
MATNR
MATWA
PMATN
CHARG
FROM VBAP
INTO TABLE IT_VBAP
WHERE VBELN = WA_VBAK-VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'NO RECORDS FOUND FOR SPECIFIED KEY'.
ENDIF.
ENDFORM. " FETCH_ITEM_DETAILS
*& Module STATUS_0200 OUTPUT
text
MODULE STATUS_0200 OUTPUT.
SET PF-STATUS 'ZSTATUS'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0200 OUTPUT
*& Module USER_COMMAND_0200 INPUT
text
MODULE USER_COMMAND_0200 INPUT.
CASE SY-UCOMM.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Form alv_grid
text
--> p1 text
<-- p2 text
FORM ALV_GRID .
IF FLAG = ''.
FLAG = 'X'.
CREATE OBJECT GRID_VBAP
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = VBAP_CONTAINER
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
others = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
GS1_LAYOUT-GRID_TITLE = 'SALES ITEM DETAILS.'(100).
CALL METHOD GRID_VBAP->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME = 'ZVBAP_STRUC'
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
IS_LAYOUT = GS1_LAYOUT
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
IT_OUTTAB = IT_VBAP
IT_FIELDCATALOG =
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " alv_grid
Thansk & regards
Sreenivasulu P

Dynamic value help for a table field to fill two fields, how to?

Hi all gurus,
In SRM 7 I defined a dynamic value help for a single field (ZZ_PROLE_R3) of my header custom table.
That's the code from WDDOMODIFYVIEW in the webdynpro /SAPSRM/WDC_DODC_CT, view V_DODC_CT:
DATA: lo_tabnode        TYPE REF TO IF_WD_CONTEXT_NODE.
      DATA: lo_tabnode_info   TYPE REF TO IF_WD_CONTEXT_NODE_INFO.
      DATA: tab_value         TYPE WDR_CONTEXT_ATTR_VALUE_LIST,
            wa_value          TYPE WDR_CONTEXT_ATTR_VALUE.
      lo_tabnode = wd_context->GET_CHILD_NODE( name = 'THCUS' ). "the custom table node
      lo_tabnode_info = lo_tabnode->get_node_info( ).
      wd_this->GET_VALHELP_ZZ_PROLE_R3( EXPORTING iv_guid = lv_guid
                                        IMPORTING ZZ_PROLE_R3_VALHELP = tab_value ). "this method returns the dyn value table
      lo_tabnode_info->set_attribute_value_set( name = 'ZZ_PROLE_R3'
                                                 value_set = tab_value ).
The method GET_VALHELP_ZZ_PROLE_R3 dynamically builds the value help table tab_value; such table is made up by two fields:
value : contains the value of the field
text   : contains a description of the value
The above solution works; now I'd like to enhance it. The custom table THCUS contains also a field called ZZ_PROLE_R3_DESC, which represents the description of ZZ_PROLE_R3. It is, exactly, the TEXT field in tab_value.
So I'd like to do as follows:
- the user clicks on the search help for ZZ_PROLE_R3 field of the table;
- the above described value help appears;
- after the selection, both ZZ_PROLE_R3 and ZZ_PROLE_R3_DESC are filled with the selected couple value - text chosen from the value help.
Could anyone help me achieving such a behaviour?
Again, a little request... when I open the above value help dialog box, the window itself has a label "Floorplan Manager application for OIF.." that obviously I'd like to redefine (e.g. "Role selection value help"). Is there any way to do that?
Thanks in advance

Chris Paine wrote:
It seems to me - given that your code is in wddomodifyview that you are trying to have different dropdowns per row
- I'm not sure where you are populating lv_guid - but I'd guess it is an attribute of the row selected? If it isn't then I can't see any reason that you would do this code in wddomodifyview and not wddoinit.
Hi Chris and thanks for your help,
lv_guid is the GUID of the document's header; I need to pass it to the method that populates my value help table because the values in it are derived from some fields on the document. (the situation actually is more complex; there's an RFC call on the backend for which the document is intended for to retrieve the data that populate the value help...).
I'm quite unexperienced on webdynpro and terminology; if dropdown menus are fixed selection option that appears on a field, I guess this is not my case. I did a pair of screenshot to provide an idea of what the solution by now is, and what "I would like to have":
[Pre-selection (F4 icon on the field in table)|http://imagebin.ca/view/npIsaqF.html]
[Value Help popup for the field ZZ_PROLE_R3|http://imagebin.ca/view/8fZUh3T.html]
[Result by now |http://imagebin.ca/view/3PaqdvE.html]
[Result I'd like to have.|http://imagebin.ca/view/dExR0J.html]
Chris Paine wrote:
However - by your comment on the "value help dialog box" I am guessing you are using an input field? If this is the case then I would strongly suggest that you change/enhance the structure of the context node THCUS (btw, better coding practise to refer to it as wd_this->wdctx_thcus when using the get child node construct) so that you refer to an actual SAP ddic search help, if you then associate in the structure the value and text fields then populating the text field should happen automatically. Also you'd have the nice side effect that your value help dialog would be named after the associated ddic search help.
Thanks for the code suggestion, I'll apply that. For what concerns the context node THCUS... It is, by standard, a node which I can't explictly find in the context for the view V_DODC_CT. The problem is that ZZ_PROLE_R3 and the corresponding description field ZZ_PROLE_R3_DESC of the table must be filled with data retrieved dynamically @ runtime from the backend. So I guess I can't populate a val help referring to a dictionary table/field; I'd rather do as follows:
- retrieve what's the target backend for the document (to do so, I have to process the document .. that's why the header guid passed to my method);
- RFC call to a custom method that extracts possible values for the specific backend;
- bind the ammissible values to the value help.
Chris Paine wrote:
I realise that this is rather a lot - so if you have any specific question please do respond - hopefully I or someone else will be able to clarify.
Thanks again for your help; additional info as well as code examples would be highly appreciated

How to add 2 more field to the Header of FBL5N ALV report output

Hi All,
I have copied and made some modification to the standard transaction FBL5N and added some fields to the ALV report line Items but how to add fields to the header part i.e if you execute the transaction FBL5n, you will get the ALV report, in the header part customer no, company code then I need to add the 2 more fields. can any one tell me that which structure or where I need to add these fields to be appear in ALV output screen.
Thanks in advance.
Swapna.

Hi Mohamed,
If you copied Z-FM successfully, then you have to go to subroutine TOP_OF_PAGE to add your field:
*&      Form TOP_OF_PAGE
FORM top_of_page.
DATA: b_suppress   LIKE boole-boole,
        opfi_text    LIKE eptext OCCURS 10 WITH HEADER LINE,
        n_color      TYPE i.
* IF     NOT it_items-bukrs IS INITIAL               "737295
*     AND NOT it_items-konto IS INITIAL               "737295
*     AND NOT it_items-koart IS INITIAL.              "737295
gs_items = gt_alv.
* ENDIF.                                             "737295
* skip first call at top of page:
IF NOT gd_first_top IS INITIAL.
    CLEAR gd_first_top.
    EXIT.
ENDIF.
IF x_grid = c_x OR x_inet = c_x.                          "1012201
    PERFORM grid_top_of_page.
    EXIT.
ENDIF.
*... open FI: get header text.
* first fill some RFXPO fields for general info:
CLEAR: s_rfxpo, wa_kna1, wa_lfa1, wa_ska1.
s_rfxpo-bukrs = gs_items-bukrs.
s_rfxpo-kkber = gs_items-kkber.
s_rfxpo-koart = gs_items-koart.
s_rfxpo-konto = gs_items-konto.
s_rfxpo-vrbez = gs_variant-variant.
s_rfxpo-waers = gs_items-waers.
* update master record:
PERFORM fill_master_rec USING gs_items-koart
                                 gs_items-konto
                                 gs_items-bukrs. " note 698396
CALL FUNCTION 'OPEN_FI_PERFORM_00001640_E'
    EXPORTING
      i_rfxpo             = s_rfxpo
      i_kna1              = wa_kna1
      i_lfa1              = wa_lfa1
      i_ska1              = wa_ska1
    IMPORTING
      e_suppress_standard = b_suppress
    TABLES
      t_lines             = opfi_text.
*... display open FI text:
IF x_konto_sort = 'X'.
    LOOP AT opfi_text.
      CASE opfi_text-color.
        WHEN 1.
          FORMAT COLOR 1.
        WHEN 2.
          FORMAT COLOR 2.
        WHEN 3.
          FORMAT COLOR 3.
        WHEN 4.
          FORMAT COLOR 4.
        WHEN 5.
          FORMAT COLOR 5.
        WHEN 6.
          FORMAT COLOR 6.
        WHEN 7.
          FORMAT COLOR 7.
      ENDCASE.
      WRITE: / opfi_text-text.
    ENDLOOP.
    FORMAT RESET.
ENDIF.
*... display other header text:
IF b_suppress NE 'X'.
    PERFORM display_custom_header.
    PERFORM display_ccard_lines.
ENDIF.
" Put your field somewhere...
ENDFORM.                               " TOP_OF_PAGE
Good luck,
Thanks,

How to add field to the header for FBL5N ALV report

Hi,
I need to add fields to the customer line item display ALV report(FBL5N) header part.Right now there are four fields in the header like customer, company code, name and city, after that I need to add first name last name and phone no. Can any one tell me where exactly I need to add and populate there fields to be appear in ALV output list.
Thanks in Advance
Swapna

Yes I have tried, I have place a break point in that perform but it does not stop. I think that is not the correct place to added and populate fields. That routine is for populate selection screen ranges single and multiple values and parameters only.
Thanks
Swapna

How to make checkbox field inactive in the output of ALV report.

Dear All,
I am having one ALV report in whose output there are checkboxes against each record. Example: the output columns of my ALV report are:
Checkbox, Sales Document No, Billing Document No.
Now, my requirement is that if for the Sales Document No there exists any Billing Document No in the output then the Checkbox should be inactive but if the Billing document coloumn is empty for a particular Sales Document No then only the Checkbox field should become active.
Kindly guide me on how to make this checkbox field inactive.
Waiting for your reply.
Warm Regards,
N.Jain

Hello,
Follow the below steps:
1.Define as--> GS_STATUS TYPE SLIS_STATUS,
2.check layout check box fieldname is not initial.
then set the status according to your logical conditions
GS_STATUS-FLG_CHECKBOXES_ACTIVE = 'X'
Hope this would help you.
Let me know your feedback.
Regards,
Raju

Sub Total Field to be bold in a ALV report

Dear Experts,
Thanks for your help till date.
I have an issue with an ALV report where the sub total field is coming, it is highlited and showing in Bold. But when I take the print of that particular report, the sub total field is not coming in bold. Is there any way to make the sub total field bold in an ALV report and the print also the same.
Regards
OP

Hello Experts,
Any replies for the above Scenarios...
Waiting for your's valuable Feedback
Regards
Om Prakash gupta

How To Add Two Heading in ALV Report

Hello Guys,
Currently I am Working on a report Contain 45 Column. Each 45 Column have there own heading like Days Target,Days Achieve..like this.
Our Requirement is That
1.Upper side of the First 10 Column one more heading required like Production Details .
2. From 11 to 20 One More Heading Called Furnace Oil. like that only.
I ask users That is not possible in ALV but they are adhere to that requirement.
Can it's is possible in ALV Grid To have a two Heading Column.
Thanks in Advance.
Regards
Swati Namdev

Hi swati,
Normally the specified requirment is not possible with the ALV...
But you can try with the tricky way... where you need to use the Hierarchical ALV.
Here you need to specify the two fields in the header table for the specified headings, and you need to declare these two fields in the item table also.
But in this case you will have one blank line on the report output(for the header data).
Regards,
Satya.

How we can select two records in alv report

how we can select two records in alv report

Hello,
You can use the method get_selected_rows.
 CALL METHOD gv_alv->get_selected_rows
 IMPORTING
 ET_INDEX_ROWS =
 et_row_no = lt_selected_rows.
READ TABLE lt_selected_rows INTO ls_selected_row INDEX 1 .
The table lt_selected_rows will contain all the selected rows.
Regards,
Beejal
**reward if this helps

How to merge the contents of two rows in ALV for particular column data

Hi Experts,
I have a requirement to merge various rows in a ALV Grid with same data for particular columns.
Kindly Suggest,
Thanks and Best Regards,
Sahil

Hi,
Just fill the and pass the SORT table for what ever fields you want this functionality.
DATA: lwa_sort TYPE lvc_s_sort.
CLEAR lwa_sort.
MOVE: 'VBELN' TO lwa_sort-fieldname,
'X' TO lwa_sort-up,
APPEND lwa_sort TO i_sort.
Now pass this SORT table to ALV FM.
Thanks,
Vinod.

Find matching records from two tables, useing three key fields, then replace two fields in table1 from table2

I have two tables - table1 and table2 - that have the exact same schema. There are three fields that can be used to compare the data of the two tables, field1, field2, and field3. When there are matching rows in the two tables (table1.field1/2/3 = table2.field1/2/3)
I want to replace table1.field4 with table2.field4 and replace table1.field5 with table2.field5.
I have worked with the query but have come up with goobly goop. I would appreciate any help. Thanks.

If your field1, field2, and field3 combinations in these tables are unique, you
can do a join on them.
Select t1.field4, t2.field4 , t1.field5, t2.field5
from table1 t1 inner join table2 t2 on t1.field1 =t2.field1 and t1.field2=t2.field2 AND t1.field3=t2.field3
--You can update your table1 with following code:
Merge table1 t1
using table2 t2 on
on t1.field1 =t2.field1 and t1.field2=t2.field2 AND t3.field3=t2.field3
When matched then
Update Set
t1.field4= t2.field4
,t1.field5 = t2.field5 ;

Field column not found in the ALV Report

Hello all,
Sorry my problem is not solved.It is in hidden fields under the column set and it needs to be come
under displayed column for ever in the similar way the other fields like Bill to # , VAT registration number, company code etc. are getting dispalyed.
Thank you,
Sirisha

Snippet of the code
perform append_new_fieldcat USING:
'NAME1' 'TYPE_ALV' SPACE space 'Bill-To Name'
  space space SPACE CHANGING ct_fieldcat.
FORM append_new_fieldcat
USING       l_fieldname   TYPE slis_fieldcat_alv-fieldname
            l_ref_tabname TYPE slis_fieldcat_alv-ref_tabname
            l_ref_fieldname TYPE slis_fieldcat_alv-ref_fieldname
            l_cfieldname  TYPE slis_fieldcat_alv-cfieldname
            L_seltext TYPE SLIS_FIELDCAT_ALV-seltext_l
            l_no_out      TYPE slis_fieldcat_alv-no_out
            l_no_zero     TYPE slis_fieldcat_alv-no_zero
            l_do_sum      TYPE slis_fieldcat_alv-do_sum
  CHANGING  p_lt_fieldcat TYPE slis_t_fieldcat_alv.
  DATA: l_fieldcat TYPE slis_fieldcat_alv.        "Field string
  l_fieldcat-fieldname      = l_fieldname.
  l_fieldcat-ref_tabname    = l_ref_tabname.
  l_fieldcat-ref_fieldname  = l_ref_fieldname.
  l_fieldcat-cfieldname     = l_cfieldname.
  l_fieldcat-no_out         = l_no_out.
  l_fieldcat-no_zero        = l_no_zero.
  l_fieldcat-do_sum         = l_do_sum.
  if not l_seltext is initial.
    move l_seltext to l_fieldcat-seltext_l.
    move l_seltext to l_fieldcat-seltext_m.
    move l_seltext to l_fieldcat-seltext_s.
    MOVE 'L' TO   L_FIELDCAt-ddictxt.
  endif.
  APPEND l_fieldcat TO p_lt_fieldcat.
ENDFORM.                    " append_new_fieldcat

Displaying data in Two line in ALV report

Hi,
I want to know how to display the data in alv in two lines for Fild name as well as for fild value
like in below case
wa_fieldcata-fieldname = 'WRBTR'.
   wa_fieldcata-seltext_l = 'AMOUNT IN DOCUMENT CURRENCY'.
   wa_fieldcata-outputlen = 18.
   wa_fieldcata-DO_SUM     = 'X'.
   APPEND wa_fieldcata TO it_fieldcat.
   CLEAR wa_fieldcata.
by this on alv COLUMN headig is coming as 'AMOUNT IN DOCUMENT CURRENCY' in one linw i want to display 'AMOUNT IN '   in first line and then 'DOCUMENT CURRENCY' below that
'AMOUNT IN
DOCUMENT CURRENCY' ***
similarly how to display value of three fidls in one column
like for a vendor   I have one column Vandor name in that column i want to display from table LFA1,
NAME1
NAME2
NAME3
NAME4,
in one column only how to do it.
regards,
zafar

Hi,
Ref . early reply can u help me how to uset his in ALV code and can u give some example for this how to display it in two lines as my column heading is of 60 characters 5 word i want to display it in two line in one column only .
How to use : SLIS_EV_AFTER_LINE_OUTPUT
to get this.
or is there any other method.
regards,
zafar

Relate between two tables in ALV REPORT(SAP-ABAP)

Hi Friends,
 I want to retrieve name1 and city1 from kna1 , and kunrg from vbrk.
 Could u pls tell me on what basis i should pick these value ?
Thx and Regds,
Bapi

Hi
tables: kna1
select single KUNNR name1 ort01 from kna1 where kunnr = vbrk-kunrg.
or
select single KUNNR name1 ort01 from kna1 where kunnr = vbrk-kunag.
write: / kna1-kunnr, kna1-name1, kna1-ort01.

link between tables is
VBRK-KUNAG = KNA1-KUNNR (customer/Sold to party)
Reward points for useful Answers
Regards
Anji
Message was edited by:
 Anji Reddy Vangala

Merge field label of two fields in ALV report

Similar Messages

Maybe you are looking for