Can't keep greylisting disabled on Lion Server.

If I remove the greylisting settings from /etc/postfix/main.cf, If the mail server is restarted, the greylisting entry is recreated.  Is there any way around this?
I know why greylisting works, and I know it does its job well.  But it's incompatible with the way we work here.  Many of our emails are time-sensitive and often from new people.  I also find that a lot of auto-response type emails just plain don't get past greylisting (password resets and such).

claytonfromgermantown hills wrote:
How do you manually replace the line.
We stated it above, but here's the run-down:
Edit: /etc/postfix/main.cf
Toward the bottom, change the line beginning with with smtpd_recipient_restrictions to be: 
smtpd_recipient_restrictions="permit_sasl_authenticated permit_mynetworks reject_unauth_destination permit"
(essentially, you'll just remove the check_policy_service unix:private/policy entries from the line).
Save the file, then reload postfix:
$ sudo postfix reload

Similar Messages

  • How can I reset my password via Lion Server web front-end?

    I'm trying to enable my users to be able to change their passwords from the default value I've given them. This can be done from the user's profile page but when with the new Lion Server web interface, I select the "Change Password" at the bottom of the page and I get the following result:
    Changing passwords is turned off.
    You can turn it on by using the Server app on the server.
    I'm assuming I cannot use the Server app on my client computer (a MacBook Pro) so I use the Server app on the server.  I cannot find out how to enable this feature.  I've been all over the Lion Server help documentation but can't find out how.
    I've selected my server in the Hardware section on the left-hand side of the Server app and gone to the Settings tab and checked the "Enable screen sharing and remote management" box but I still get the message above.
    Thanks in advance...

    You will have to enabled "Profile Manager" tab.
    Inside this tab, enable also the "Device Management", which will start a network directory.
    This make sense for a centralized user mgmt.
    But a bit not user-friendly enough.
    After setting above two,
    go back to the "Web" tab, and click the pencil to see the grayed-out activated.

  • Server App can't connect to a Mountain Lion server

    Hi,
    I installed OS X Mountain Lion Server (2.2.1) on a 2012 Mac Mini running OS X 10.8.4. I am able to access all the options using the Server.app on the Mini. Then I installed the Server.app (2.2.1) on a 2010 MacBook Pro running 10.8.4. On trying to configure the Server options on the Mac Mini from the MacBook Pro by providing the correct Mac Mini admin credentials, the password is not validated correctly. This happens when both the systems are on the same network or on different networks.
    I am certain that the username / password provided is correct, since using the same credentials I can successfully remote into the Mac Mini using Apple Remote Desktop (3.6.1) when both the systems are on the same network or on different networks.
    My situation supersedes the resolution provided in http://support.apple.com/kb/TS3960?locale=en_US. Note that the command sudo launchctl list | grep -q com.apple.servermgrd && echo loaded || echo not loaded returns loaded on the Mac Mini.
    Please help!

    I am having exactly the same setup and exactly the same problem - nevertheless I would like to add some more information in order to hopefully find / get help from other readers in here.
    I am using DynDNS - not a dedicated domain. I do not utilize an AirPort Extreme for port forwarding and else. All the necessary port forwardings were triple checked!
    - First of all "Apple Remote Desktop" is able to connect to my server over the internet (screen sharing) and locally in my LAN. No troubles here.
    - My iOS devices can connect using various VNC clients without any troubles.
    - VNC connections started within Safari (MacBook Pro) do work very well, too.
    - All kinds of WebDAV connections are working like a charme.
    - When connecting with "Server.app" from my MacBook Pro it asks if I would like to trust the self-signed certificate before I can enter name and password. After trusting that certificate it doesn't matter which account information I am entering: none is accepted. It does not make any difference if I am using a local user account or a user network account (both configured as being allowed to administer that server). "Server.app" does not accept any information provided.
    I've been following the KB advice, too that c xavier mentioned. "servermgrd" is loaded!
    For some odd yet unknown reason neither WAN nor LAN FTP login does work, too. It just gives me a time out, as already mentioned WebDAV is working fine.
    Sorry I could not help You, c xavier! I just thought that some additional information could help...

  • How can i connect windows(laptop) to lion server?

    Hi..
    We in our company use mac's as clients. We use Mac OSx 10.7 lion server. We have a lenovo laptop for general purpose. Now can we connect that laptop in network. So that can we remotely use mac screen sharing.

    Are you asking how to connect to FileSharing from the PC ?
    Or are you asking about screensharing?
    On Server
    If file sharing, edit the SharePoint and make sure that
         Windows File Sharing (SMB) is enabled
    On the PC:
    Map a network drive
    \\10.0.0.1\Share
         (your IP and the share name)
    Make sure you check the box to use another account or user/password
    It will then ask you to enter a password.
    In general, the above should work.
    There are some cases where it requires a few other tricks.
    Good Luck

  • Windows can't connect to shares on Lion Server

    I can't connect any windows machines (XP, Vist, or 7) to a Mac Pro running Lion Server. When attempting to connect, the windows user is prompted for credentials, and nothing entered in this box works even the server admin account info, once entering account credentials, it comes back with NAMEOFWINDOWSCOMPUTER\USER as if it's trying to sign into a domain, which we don't have domains.
    I can't seem to find anything relevent when searching...

    There are a couple things you can try:
    1.\ go to the apple server, sys prefs, sharing, selct file sharing and then select option. from there make sure the both check boxes are selected. then select done.
    2.\ while you are there, in the shared folders section, selct the folder you would like to share (or add if its not) and make sure the user is in the users pane that you want to share the folder with.
    3.\ restart your windows machine to make sure it forgets any passwords you may have put in.
    4.\ if it still doesnt ask for a user account go to map network drive. and select the option to put another username and password in. for the user name user SERVERNAME\username - ensure the servername is in CAPITAL letter...
    hope this helps...

  • How can I setup mail serveice in Lion server

    Where can I set the smpt and pop server's name?Why my mail account cannot link the server ?

    Maybe you need to ask in the Lion Server Forum?

  • Where can I configure mail quotas in Lion Server?

    One (minor) problem for me, after upgrading from SnowLeopard Server to Lion Server is the fact, that I can't figure out where to administer the mail quotas. So far I have just managed to find the "Server Admin". Here, under Mail -> Maintenance I can see the quotas and under Mail->Settings->Quotas I can enable quota warnings and edit them. But I can't find a place to configure individual quotas. The quota settings from SnowLeopard server have been migrated and are still in place. But how should I change them. It used to be in WorkgroupManager. But in WorkgroupManager this item is gone.
    Many thanks for your replies.

    Followng up a bit,
    In looking into OD records on my Snow Leopard Server via the Inspector in WGM, I see the following attribute for one of my users for whom I've set a 1024mb mail quota.
    Name:
    MailAttriute
    Value:
    <?xml version="1.0" encoding="UTF-8"?>
    <dict>
              <key>kAPOPRequired</key>
              <string>APOPNotRequired</string>
              <key>kAltMailStoreLoc</key>
              <string></string>
              <key>kAttributeVersion</key>
              <string>Apple Mail 1.0</string>
              <key>kAutoForwardValue</key>
              <string></string>
              <key>kIMAPLoginState</key>
              <string>IMAPAllowed</string>
              <key>kMailAccountLocation</key>
              <string>[redacted].[redacted].org</string>
              <key>kMailAccountState</key>
              <string>Enabled</string>
              <key>kPOP3LoginState</key>
              <string>POP3Allowed</string>
              <key>kUserDiskQuota</key>
              <string>1024</string>
    </dict>
    I'm wondering if manually entering this attribute, and an XML value with at least the kUserDiskQuota key included will be all I need to do to implement per-user quotas in Lion Server.
    If I get time, I will test and report back.

  • Why can't I uninstall the Mountain Lion Server?

    Background
    My windows laptop failed and my iMAC's hard drive was recalled recently.  During this time I decided to buy a MacBook Pro and migrate everthing from my Windows laptop.  I also bought Airport Extreme.  As I got recently unemployed, I wanted to create a private network accessible from my MacBrook and MacBook Air (until I could afford to buy the Mac Mini Server).  So I downloaded the Lion Server from the App Store using my MacBook Pro (I didn't realize it would install automatically).  So, I redownloaded from my iMac and went through the configuration.
    Issues
    I was unable to log in using my existing user accounts from the MacBook/Air.  I turned on the screen sharing (as I had lots of applications and documents on the iMac).  But my firewall reported access to screen sharing service, web service etc from external IP addresses.  iMac frequently went into freeze modes (no response to mouse/keyboard) and sometimes blank screen (monitor off).  So I turned off screen sharing.
    I struggled with finding a way to make the local accounts into network accounts.  I even tried adding them to a Network Group.  I was unsucessful in being authenticated by the iMac server.  The login window always showed "... unavailable ..".  I went through and tried all suggestions posted in this site. Nothing seemed to work.
    I decided to unistall the Server and do a fresh install.  Even here there were no clear documentation/instructions with the server app.  According to suggestions here and as per this http://support.apple.com/kb/HT4827 article, I removed the turned off all services, deleted the Server.app and also the /Library/Server folder.  Rebooted.  The iTunes store's purchased page still shows the Server as Installed.  I did the same on the MBP and it shows up asInstall.
    I don't see any of the server applications in the Activity Monitor.  But my firewall reported incoming requests to Kerberos, Port 464, 5000, 625, 749, and Program Linking.
    Airport Extreme is letting in external requests.  I did not use public domain for my server nor any dynamic dns service.
    Questions
    How do I remove completely the Server app from my iMac?
    The first time I installed the server, I used it to control the Airport Extreme.  So how do I reset the Airport Extreme to factory settings (assuming Apple's marketing literature is correct) so that it acts as a barrier between the wild, wild internet and my home network?
    Is there better control of the Airport Extreme base station? Like MAC filtering?
    How do you elevate existing users on iMac to the level of network users?  I want any of my family members to be able to use the MBP or MBA using their own account and see their documents and settings.
    Recommendations Solicited
    I cannot add a Mac Pro/Mac Mini Server at this point (unless Apple comes out payment plans for the consumers).  That is why I purchased the MBP/MBA from BestBuy.  So need the best way to use my existing resources to create a small home network for school, development, testing etc.

    I have captured the install log.  Right now I don't have the Sever.app and related files in the system.  But log shows the server is running or installed today.  I have seen MiniLauncher tag (don't know what it is).  And if the server is running, it is not appearing in the Activity log.

  • HT4827 How to disable Mountain Lion Server?

    Typical of Apple to release software without documentation
    Please help me find current information for http://support.apple.com/kb/HT4827
    There is no "Dedicate system resources to server services" in Mountain Lion Server.....
    HELP

    Does not look like that would be verry effective - as I see many items in various lovcations from this app - sigh...

  • Still can't get VPN running on Lion Server

    Hi Guys.
    I'm runinng 10.7.2.  I had VPN running on SL, but have never had it working on Lion.
    I'll start off by saying I have NO airport or any other router.  My box is hooked up straight to the net.  I have 5 vlan interfaces.
    One if for the internet, one is for the lan, one is for a guest, one is just for configuring the switch, and one is for configuring the aruba wireless gear.
    I can connect to the VPN from inside the network, but not from the outside.  You would think this might be a firewall issue, but I have tried with the firewall disabled and it makes no difference.
    This is what I'm seeing in the logs when I attempt to connect externally:
    2011-11-24 13:57:14 PST          Incoming call... Address given to client = 192.168.3.143
    Thu Nov 24 13:57:14 2011 : Directory Services Authentication plugin initialized
    Thu Nov 24 13:57:14 2011 : Directory Services Authorization plugin initialized
    Thu Nov 24 13:57:14 2011 : L2TP incoming call in progress from '166.147.81.230'...
    Thu Nov 24 13:57:14 2011 : L2TP received SCCRQ
    Thu Nov 24 13:57:14 2011 : L2TP sent SCCRP
    2011-11-24 13:57:14 PST          Incoming call... Address given to client = 192.168.3.144
    Thu Nov 24 13:57:14 2011 : Directory Services Authentication plugin initialized
    Thu Nov 24 13:57:14 2011 : Directory Services Authorization plugin initialized
    Thu Nov 24 13:57:14 2011 : L2TP incoming call in progress from '166.147.81.230'...
    Thu Nov 24 13:57:14 2011 : L2TP received SCCRQ
    Thu Nov 24 13:57:14 2011 : L2TP sent SCCRP
    2011-11-24 13:57:16 PST          Incoming call... Address given to client = 192.168.3.145
    Thu Nov 24 13:57:16 2011 : Directory Services Authentication plugin initialized
    Thu Nov 24 13:57:16 2011 : Directory Services Authorization plugin initialized
    Thu Nov 24 13:57:16 2011 : L2TP incoming call in progress from '166.147.81.230'...
    Thu Nov 24 13:57:16 2011 : L2TP received SCCRQ
    Thu Nov 24 13:57:16 2011 : L2TP sent SCCRP
    2011-11-24 13:57:21 PST          Incoming call... Address given to client = 192.168.3.146
    Thu Nov 24 13:57:21 2011 : Directory Services Authentication plugin initialized
    Thu Nov 24 13:57:21 2011 : Directory Services Authorization plugin initialized
    Thu Nov 24 13:57:21 2011 : L2TP incoming call in progress from '166.147.81.230'...
    Thu Nov 24 13:57:21 2011 : L2TP received SCCRQ
    Thu Nov 24 13:57:21 2011 : L2TP sent SCCRP
    2011-11-24 13:57:25 PST          Incoming call... Address given to client = 192.168.3.147
    Thu Nov 24 13:57:25 2011 : Directory Services Authentication plugin initialized
    Thu Nov 24 13:57:25 2011 : Directory Services Authorization plugin initialized
    Thu Nov 24 13:57:25 2011 : L2TP incoming call in progress from '166.147.81.230'...
    Thu Nov 24 13:57:25 2011 : L2TP received SCCRQ
    Thu Nov 24 13:57:25 2011 : L2TP sent SCCRP
    2011-11-24 13:57:29 PST          Incoming call... Address given to client = 192.168.3.148
    Thu Nov 24 13:57:29 2011 : Directory Services Authentication plugin initialized
    Thu Nov 24 13:57:29 2011 : Directory Services Authorization plugin initialized
    Thu Nov 24 13:57:29 2011 : L2TP incoming call in progress from '166.147.81.230'...
    Thu Nov 24 13:57:29 2011 : L2TP received SCCRQ
    Thu Nov 24 13:57:29 2011 : L2TP sent SCCRP
    2011-11-24 13:57:33 PST          Incoming call... Address given to client = 192.168.3.149
    Thu Nov 24 13:57:33 2011 : Directory Services Authentication plugin initialized
    Thu Nov 24 13:57:33 2011 : Directory Services Authorization plugin initialized
    Thu Nov 24 13:57:33 2011 : L2TP incoming call in progress from '166.147.81.230'...
    Thu Nov 24 13:57:33 2011 : L2TP received SCCRQ
    Thu Nov 24 13:57:33 2011 : L2TP sent SCCRP
    2011-11-24 13:57:34 PST             --> Client with address = 192.168.3.143 has hungup
    2011-11-24 13:57:34 PST             --> Client with address = 192.168.3.144 has hungup
    2011-11-24 13:57:36 PST             --> Client with address = 192.168.3.145 has hungup
    2011-11-24 13:57:41 PST             --> Client with address = 192.168.3.146 has hungup
    2011-11-24 13:57:45 PST             --> Client with address = 192.168.3.147 has hungup
    2011-11-24 13:57:49 PST             --> Client with address = 192.168.3.148 has hungup
    2011-11-24 13:57:53 PST             --> Client with address = 192.168.3.149 has hungup
    I'm all out of ideas.  If anyone else has had an issue running VPN with multiple VLANs and has some insight, I would love to hear it.  From what I can tell I'm dialing in, but the servers response packets are never going back to the client.  I don't know how to trouble shoot that.

    I am having this exact same issue. Sounds like you're on Comcast also? I can connect from inside but not out... and I've even talked to Comast on the phone but it made no difference. I really think this is a Comcast issue, because, if you're like me, you can access all other services the server is providing
    Do you know if there's a way to change the port for the VPN service for testing purposes? This might help clarify what's going on...
    Also-- I should add that Comcast suggested disabling Gateway Smart Packet Detection as that can apparently interfere with secure packets. Try that out and post if it helps!
    Message was edited by: iKenny

  • How can I keep messages on the iCloud server?

    I now compute from two locations, home 1 and home 2, with home 1 being my main machine.  When I'm at home 2, how can I use Mail to read my messages but keep them on the server so that when I return to home 1, I can download to my main Mac?  I can't find a switch in preferences that allows me to do this.
    Rocketman

    If you have verified that the iPad and iPhone cannot see the messages after the Mac Pro at home2 downloads them, it's probably something on that Mac Pro. The smart mailbox on the other system was a false lead.
    Please verify that the messages are still in the Inbox on the Mac Pro after the same messages have disappeared from view on the iPad and iPhone. I think that's what you said, so I'll assume for the moment that that's the case.
    If you have multiple email accounts set up on the Mac Pro and not all are set up on the other devices, it is possible that the messages have somehow found their way into the wrong Inbox.
    Can you check the individual Inboxes to verify that the messages are still in the iCloud Inbox specifically? You can click the disclosure triangle on Inbox to show the various inboxes.

  • Can't write/save files to Lion server after upgrading to Yosemite

    So I updated my "home" computer to Yosemite, I always test new OS on this computer for issues first as to not affect the all important "work" computer. Only issue I can find is I can't save/write files to my mac server running 10.7.5 (lion). It seems I have dissappeared from permissions. I can't add me back in because my mac on 10.10 states I don't have permission to do that (mind you I am admin on everything). I go to my work computer that is still on Mavericks and everything is fine, I can write to the server with no issues.
    Any ideas on where I should look to fix a setting that seems to have gone awry? It was late last night and I was getting tired of figuring out what to fix.
    I do see "me" for that "home" computer on the server....just not showing on the "home" computer itself.
    Than

    By looking at your post i have several questions to ask :
    Where are the temporary files stored ?
    Which data sharing scheme are you using for them ? AFP with POSIX or ACL behaviors, something Indesign uses ?
    Which versions of indesign are you using ? Some differences exists in between PPC installs and Universal install and may play havoc with that.
    There might as well be the question of ownership and rights that may differ as mentionned above in between your G5 workgroup and the MacPro.

  • How can I keep a newly created reports server running?

    I have had to create a second reports server under 9ias Rel.2. This server is in addition to the out-of-the-box server installed with 9ias Rel. 2. I created the new server logged on to a Solaris session using the command rwserver.sh server=<new name>. The creation went just fine. I am able to use the new server just fine, EXCEPT if I log off the Solaris session used for the startup of the new server.
    I know this sounds similar to the problem of the default server going down if the unix session is logged off. However, I solved that problem by installed XVFB, using a DISPLAY of other than 0, and changing the opmn.xml file. All that works great. But, it does not seem to have an effect on the new reports server I created.
    Does anyone have any ideas how to get around this issue for reports servers other than the default?

    I had similar prob. but with vnc instead of xvfb.(similar product)
    I put the startup of vnc in the same script as the start of the rwserver.. it looks like :
    export DISPLAY=servername:12.0
    vncserver startup
    wait 5 secs
    set oracle homes etc..
    rwserver.sh server=myrepserver
    I start this script using the unix nohup command :
    nohup startrepserver.sh &
    the vnc server starts and the reports server starts..
    I use a different port (12, 13,..) for reports/discoverer/forms compilation

  • Can imovie projects be shared using lion server

    Want to store iMovie projects and events on HDD (mybook studio edition) and work on projects from multiple macs. The HDD is connected to a time capsule and currently iMovie cannot see it.

    "iMovie 6 still works on OS X Mountain Lion without any problem"
    Hooray. Glad it will work.
    Thanks for the rapid reply.

  • Where can I download lion server app

    I can't find a copy of lion server app anywhere not even when I contacted apple. Does anyone know where can I find it?

    Now that Mountain Lion is out, you can't buy older versions of OSX directly from the Apple Store. However, you can try calling Apple (1-800-MY-APPLE) and tell them that your hardware doesn't support Mountain Lion. I'm sure they still have copies of Lion. It's not like they destroy all traces of previous versions of OSX every time a new version is released.

Maybe you are looking for

  • Leopard upgrade results in blue screen

    Finally going to make the jump from 10.3.9 to 10.5. Unfortunately, after running the Leopard disk all I can get is a blue screen. Two pertinent points that may have some bearing on this dilemma: 1. My onboard super drive isn't working so I'm using an

  • Performance Issue when setting connection information

    I am writing a Winforms application using VB.NET I have developed a method that sets the Crystal Reports Connection. This method first grabs the connection string from the config file creates a Crystal Reports ConnectionInfo object. The following cod

  • HP Laserjet Pro 1102w Wireless (Not working on MacBook Air 10.10)

    HP Laserjet Pro 1102w Wireless is not working on my MacBook Air Yosemite (v10.10). I tried setting it up via this link: (v10.10 Yosemite, Method 3: Wireless Setup Using a USB Connection) http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname

  • Currency of Base Planning Object, KKE1, CKUC

    Dear all, I have a question regarding the currency used to valuate base planning object. The system stores the total value only in what it calls the "local" currency, actually it is the controlling area currency. We need the figures in the company co

  • No tap & pay menu in setting

    i checked other z3c and they have tap& pay in the setting. how do i get this enabled? Solved! Go to Solution.