Can't Log in with regular user & pass

I am trying to get a question answered. I was always able to access this forum with my usual username and password. Now the forums won't allow me to log in; instead they require that I re-register as a new user under my .Mac address. Though I have done that, I don't understand why they are putting me through all this fuss. I am unable to use my usual alias...duh! because I am already registered under that alias! But I'm not allowed to log in under it. When I click the login link I get a register as new user page with my address already set to my .Mac address. Can anyone explain this?

Greetings,
sorry to report same problem here, despite being very familiar with registering & use of web forums
and other sites requiring user sign up... in fact, this type of snafu has never happened to me over
years of use across dozens/hundreds of sites. Site Admins--Any clues or info based on some recent change of this forums config??
10.27.07: initially registered new account & alias (MeanPony) for use in the discussion forums;
can't access that account or retrieve password;
11.02.07: have now got 2nd new account with 2nd alias (switt44) apparently linked to the same email??
don't need two accounts & two aliases, even-though that is now the case!
Please, help me sort this out, so I can access the original account with the MeanPony alias.
very hesitant to publicly post email, so admin please contact me via the currently registered email,
to update MeanPony account and/or delete this switt44 account, because i don't need it or plan to use a new .mac email address. I'd actually like this whole post deleted, once this issue is solved if possible!
kind regards,
current alias: switt44 (needed to make this post)
previous alias: MeanPony (would like to access/update profile, subscribe/unsubscribe to previous posts etc.)

Similar Messages

Can't log on with administrator user by finding the message "The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on.

Hi,
Now, my Windows 2008 R2 Enterprise server are running in the domain. It have problem about some one in my team have remote my server with the user administrator while I'm remote it now. It make my session loss. I tried to remote it again but I found
the message at the log on screen about "The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on."
Now, nobody can't remote with administrator user into this server. I have check the application log. I found the error message like this.
++++++++++++++++++++++++++++
Source: Desktop Window Manager
Event ID: 9003
Detail: None The Desktop Window Manager was unable to start because a composited theme is not in use
++++++++++++++++++++++++++++
Source: Microsoft-Windows-Winsrv
Event ID:10002
Detail: The following application was terminated because it was hung: mmc.exe.
++++++++++++++++++++++++++++
Source: Microsoft-Windows-Winsrv
Event ID:10002
Detail: The following application was terminated because it was hung: javaw.exe.
++++++++++++++++++++++++++++
Source: Microsoft-Windows-Winsrv
Event ID:10002
Detail: The following application was terminated because it was hung: Explorer.exe.
++++++++++++++++++++++++++++
Source:Desktop Window Manager
Event ID:9009
Detail:The Desktop Window Manager has exited with code (0x40010004)
++++++++++++++++++++++++++++
Source:Microsoft-Windows-Winlogon
Event ID:6005
Detail:The winlogon notification subscriber <Sens> is taking long time to handle the notification event (Logoff).
++++++++++++++++++++++++++++
In addition, I can log on this server with other user but I can't log off by it's showing the message "please wait for the system Event Notification service". Normally, the problem can solve by reboot the server. But how can be solve this problem
by we do not reboot the server?

Hi,
The cause of unable to remote back to the server seems to be services hung, please try to reset session as the article below guides to see if it works:
Windows Server: Remote Desktop Error: The task you are trying to do can't be completed because Remote Desktop Services is currently busy
http://social.technet.microsoft.com/wiki/contents/articles/28636.windows-server-remote-desktop-error-the-task-you-are-trying-to-do-can-t-be-completed-because-remote-desktop-services-is-currently-busy.aspx
If the issue can always be re-produced, then I would suggest you fully patch the system.
More information for you:
The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on
https://social.technet.microsoft.com/Forums/windows/en-US/c58bfbd5-1d63-47e3-a489-6d8c8778b76b/the-task-you-are-trying-to-do-cant-be-completed-because-remote-desktop-services-is-currently-busy?forum=winserverTS
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

After Using Migration Assistant Can't Log On With That User Account

I used Migration Assistant to move only my Settings and Users from my Power PC (User name RLE 5) to my Mac Pro. Because of what I have read in these forums I did not migrate applications or and files/folders. I will do that manually. After migrating I tried logging in to my user account RLE 5 on my Mac Pro, but it is telling me I am using the wrong password. I used the same password I used on my Power PC, but with no luck. On my Mac Pro I went into System Preferences>Accounts>RLE 5 account and changed the password. I then rebooted and tried again. No luck.
Can somebody help me with this problem?
Thank you.

Hi jenaS, sorry to hear that you're havig an issue after refresh of the system, if ur logged in using a live account it shouldnt change or remove the pin, if you are usin a local account the issue there might be in the profile on the system it might be corrupted, do you have a screen shot of the issue?
Dont fake the funk............

Can't log in with new user and password i set up on new eprinter from HP

I am unable to get into the ecenter on eprinter. Even when I try to rest password it does not recognize the email address. When I try to create a new one, it says it already exists. I m using my personal email account. Please help.

Hello rgabriel24,
If you are having issues logging into your ePrintCenter account try logging in using the Snapfish icon on the "Sign In" page. It is the small blue icon with a black fish on it located on the far right of the icons below the login and password fields.
If you are still unable to login with this icon use the "Forgot Password" link with the Snapfish icon and try to have your password reset. If this works, you should receive an email with a temporary password you can use to login to ePrintCenter.
Let me know if this works for you or if you need additional assistance.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

Which keyboard layout you were using? German, French ... I suppose your layout is reset to the default: US and you are unable to find the "?" or "/" ...
Please have a look into the keyboard viewer, to see how the layout of your keyboard is actually.
marek

Hi, Trying to log in with my user id and password at iocbc but was not able to access. Problem message shown : Applet not initialised or may not be supported. Please refresh the page or check the browser setting Anyone can advise? or i need to download?

Hi,
i have the same problem?
Trying to log in with my user id and password at iocbc but was not able to access.
Problem message shown : Applet not initialised or may not be supported. Please refresh the page or check the browser setting
Anyone can advise?

You need to install Java for your Mac OS version, and/or make sure it's enabled in the Java Preferences application and your browser's preferences.

I set up a new user on my network today and am now in a location without access to that network. I just set her up as a user on her macbook but I can't log in with her credentials. Is that because I am not on the network and it is the initial setup?

I set up a new user on my network today and am now in a location without access to that network. I just set her up as a user on her macbook but I can't log in with her credentials. Is that because I am not on the network and it is the initial setup?

You need to set the option to create a mobile account using the Directory Utility app.

We are sorry, but we are unable to complete your request.•The Office 2007 Product Key provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.

Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone???

Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone???

Can't log in with LXDM

Another Arch newbie here!
Basically I have issues with logging in with my LXDM display manager. I installed Arch toward the end of October and I'm still trying to shape it to my liking.
What's supposed to happen : I can start my LXDE or Openbox session after selecting my username and typing my password.
What actually happens : everytime I type my password and press Enter, the screen goes blue for a second and reverts back to the login screen. The same happens if I try to log in as root.
Before running into this issue I was trying to configure keyboard shortcuts so that I can adjust the volume with fn/XF86 keys. I also performed an update at some point too.
The last files I created or modified were /etc/X11/Xsession ; openbox/rc.xml ; etc/rc.conf and ~/.bashrc
I can log in with both user and root account if I press ctrl + alt + F2 and the startx command works. I'm not using xinitrc.
I tried to get some informations on the arch wiki and other website but didn't find a solution so far. I also wouln't like to make it worse by performing wrong manipulation which is why I'm posting about my issue here.
Thanks in advance!
Last edited by Marchare (2013-11-03 15:04:14)

Well, only /home/user/.bashrc had something written on it. The others are empty. Just deleted them and nothing changed, it seems.
# ~/.bashrc
# If not running interactively, don't do anything
[[ $- != *i* ]] && return
alias ls='ls --color=auto'
PS1='[\u@\h \W]\$ '
Maybe I should try to update Arch? or perhaps replace LXDM with something else and more stable?
Last edited by Marchare (2013-11-03 17:16:11)

ICal Server - Can't log in with Kerberos?

Hello, I have been struggling the past few days getting ical server properly installed and configured to incorporate into our environment (just installed 10.6 server). I am very new to Kerberos, in fact never heard of it before getting into this, but would like to possibly use it as an authentication option. I have my master open directory installed and running, it says Kerberos is running, ldap as well as password server, all running. I created some test users in the LDAPv3/127.0.0.1 directory with open directory password types. I have opened ticket viewer and assigned tickets to these test users. In my Ical settings in server admin, I have authentication type set to kerberos. When I try to add an account via my ical client on my workstation (also 10.6 just installed), it searches and I get the message:
"Ical found the CALDAV server "servername" but couldn't log in with the user name "username". Make sure the user name and password you entered are correct, then try again"
If I click next and go to the calendar server options screen I select Ical server template, the port changes to 8443 I believe and I change it back to the default of 8008, and click use kerberos v5 for authentication, and uncheck Use SSL as I have that off. I then get the message of:
"Authentication failed. The server does not support Kerberos authentication."
Now, if I go completely backward, and change my iCal server authentication type to Digest, or Any Method, I can log in using any of my local user names and passwords and any open directory password users. This is great because it shows me the system is working, and I can get in, however what I don't quite understand is if I log in with a different/various usernames and passwords, I get a separate calendar for each login. When watching the apple demo video of Ical server here http://www.youtube.com/watch?v=7bzMTpLv-EE&feature=related , it seems there is one calendar, and multiple users are logging in using different logins, but accessing the same calendar.
So I guess my main questions are, why isn't Kerberos working, and how do I get it to work, am I missing something? And how do I get Ical server to operate the way it is in the video, so people log in with different various logins but are able to see the same "work" calendar as shown in the video.
I appreciate any help/insight. Thank you.

One additional piece of information that I don't know if it is a bug or if anyone else has this problem, but when I am logged in with a user, and access my address panel via my ical client, none of my locations, resources, people, or groups show up, every category is empty. However, if I start to type a search for a location name or user that I know the name of that I have added, THEN it will show up and I can click/select it. Almost behaving completely backwards, any ideas why these are not showing up without using the search??? Thank you again.

How can i share documents with different users on the same mac?

How can i share documents with different users on the same mac?

Shared how? The other users can read the documents or you all can read and write the documents?
The first is easy just place the documents in /Users/Shared anyone can access the files there and the other users will be able to read them.
The second is a bit trickier.

I know my Game Center username and password, but I don't know the email (or maybe apple id) that is for my account. It is not my normal one. I can't log in with just my username, so does anyone know how I can get my email?

I know my Game Center username and password, but I don't know the email (or maybe apple id) that is for my account. It is not my normal one. I can't log in with just my username, so does anyone know how I can get my email?
Can you help me please

Dear
I have worked renovation of the device and have an account, but I forgot my email
I do not know E-mail has been linked in game center
I have a name defined in game center
Do I have the possibility of knowing E-mail has been linked in game center

I am from Bangladesh. I can't log in with my gmail Apple ID. When I put in the mail and password, and press sign in, it says it has to review on iTunes. Then I am directed to opening a new account. But why should I , since I have one. Plz help :(

I am from Bangladesh. I can't log in with my gmail Apple ID. When I put in the mail and password, and press sign in, it says it has to review on iTunes. Then I am directed to opening a new account. But why should I , since I have one. Plz help

Hi Ishrak,
I apologize, I'm a bit unclear on exactly what you are trying to log into with your Apple ID, or what exactly you are seeing (alert message, directions, etc) when you try to do so. If you continue to have issues with your Apple ID, you may find one or more of the articles linked from the following page helpful:
Apple ID - Apple Support
Regards,
- Brenden

I can't log in with my ID

I can't log in with my ID

The paucity of details is amazing. Which iMac, which OS? Log in where? Into the computer? Mac OS X uses usernames and passwords and not an ID.

Can log in with my Skype account can't log in with...

I can log in with a Skype account can't log in with a Microsoft account

weird. isn't there an option for signing in with a microsoft account? do you have a skype name and password? if that's the case, then it's mostly likey that the only way to get into skype is using your skype name and password.
it's the most likley explataion.

Can't Log in with regular user & pass

Similar Messages

Maybe you are looking for