Can't ping other server and more.
This is a weird one. I have a few problems going on. I have 2 netware 6.5 servers. My BM3.9 sp1 server is on Netware 6.5sp7 and my other server is Groupwise 7.03 on Netware 6.5sp6. My Groupwise server is strictly used for Groupwise. My BM3.9 server runs everything else for my enviornment; it is our main server for all of our data. I can vpn into and login to my BM server with no problems; however I can't ping or connect to the Groupwise server. Also I can't ping any internal workstations through the vpn. And what is even weirder is that I can't ping the private IP address of the BM3.9 server and yet I can log into it. I have the default address set up on the Groupwise to point to the private address of the BM server. I have the default address setup on the BM server to point to the ISP router that we have in our office. Also I can't browse the internet when I'm connected to the vpn and I do have as my last traffic rule to not encrypt (bypass). I have noticed that when I'm connected to the vpn that my dns settings on my laptop change to the office dns and yet I have not configured dns to be pushed through the vpn. One more thing, I have set up the hosts file on my laptop to point to internal computers. Any help is greatly appreciated.
Thanks in advance.
Originally Posted by Mysterious
Sksgl wrote:
> This is a weird one. I have a few problems going on. I have 2 netware
> 6.5 servers. My BM3.9 sp1 server is on Netware 6.5sp7 and my other
> server is Groupwise 7.03 on Netware 6.5sp6. My Groupwise server is
> strictly used for Groupwise. My BM3.9 server runs everything else for
> my enviornment; it is our main server for all of our data. I can vpn
> into and login to my BM server with no problems; however I can't ping or
> connect to the Groupwise server. Also I can't ping any internal
> workstations through the vpn. And what is even weirder is that I can't
> ping the private IP address of the BM3.9 server and yet I can log into
> it. I have the default address set up on the Groupwise to point to the
> private address of the BM server. I have the default address setup on
> the BM server to point to the ISP router that we have in our office.
> Also I can't browse the internet when I'm connected to the vpn and I do
> have as my last traffic rule to not encrypt (bypass). I have noticed
> that when I'm connected to the vpn that my dns settings on my laptop
> change to the office dns and yet I have not configured dns to be pushed
> through the vpn. One more thing, I have set up the hosts file on my
> laptop to point to internal computers. Any help is greatly
> appreciated.
>
> Thanks in advance.
>
>
Wrong traffic rules?
I have gone over and over the traffic rules that are listed in Craig's book and have followed them exactly. My first rule in an admin to all rule that applys to me and the destination is to the network.
Thanks.
Similar Messages
-
Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.
Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.
-
This is a recent development but I can not print anything from within Firefox. The print functions open normally, it is going to the correct printer which works..I can print from other browsers and applications. It acts like it is spooling and then a print error occurs and it won't print. I closed and reopened Firefox, opened it in safe mode, cleaned out history/cache/cookies, and rebooted twice. Nothing makes any difference. Also tried printing from the print preview which had the same result. I can print from all other browsers and applications without a problem so it must be within Firefox.
See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages -
Cannot order AT&T iPhone 6 Gold 64gb in BEAST but can order every *other* model and color combo?
Been going into Best Buy for the last few days trying to order this phone thinking that they'll get this problem fixed and I can order the iPhone 6 I want. But every time they pull up the iPhone 6 order screen the AT&T iPhone 6 Gold 64gb is the *only one* that doesn't show up. I can get any other size and color but that one. The employees are stumped and one even said it seems like a bug in the system.
I can go to Apple, Target, Radioshack, etc. and order this phone and have it in '7-10 business days', but it's bugged in Best Buy's system for some reason. What gives? Is it actually a bugged item? The SKU is 7640053 please help!Hello smith839-
As far as I know, this is not a bug. Availability of all models of the iPhone 6 is still limited and once they become available again, the store should be able to order.
Thanks,
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message -
i purchased gems from a game and didnt get them because my method was declined i want to remove the order so i dont pay for it and so i can update my other apps and i want to remove the method i will be thankfull if someone help me without updating the payment method i cant update my apps in my iphone i want to remove the method and remove the order i dont want it
Click here and ask the iTunes Store staff for assistance.
(125742) -
How come when I place a call through FaceTime on my iPad I can see the other person and they can't see me?
Is your camera sitched on?
Using FaceTime
http://support.apple.com/kb/ht4319
Troubleshooting FaceTime
http://support.apple.com/kb/TS3367 -
One router on ASA 5505 Site to Site VPN can't ping other router
I have two Cisco ASA routers and I have a site to site vpn set up between the two. The VPN link works but Site A can't ping anything on Site B. Site B can ping Site A. Site B can ping other pcs on it's own network. Site A has been in place for a while and has other site to site VPNs that work fine, so I think the problem is with Site B. Here is the config for Site B:
Result of the command: "show running-config"
: Saved
ASA Version 8.4(4)1
hostname SaskASA
enable password POgOWyKyb0jgJ1Hm encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.16.1 255.255.254.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
ftp mode passive
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network NETWORK_OBJ_192.168.16.0_23
subnet 192.168.16.0 255.255.254.0
object network NETWORK_OBJ_192.168.2.0_23
subnet 192.168.2.0 255.255.254.0
access-list outside_cryptomap extended permit ip 192.168.16.0 255.255.254.0 192.168.2.0 255.255.254.0
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static NETWORK_OBJ_192.168.16.0_23 NETWORK_OBJ_192.168.16.0_23 destination static NETWORK_OBJ_192.168.2.0_23 NETWORK_OBJ_192.168.2.0_23 no-proxy-arp route-lookup
object network obj_any
nat (inside,outside) dynamic interface
nat (inside,outside) after-auto source dynamic any interface
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable 444
http 192.168.16.0 255.255.254.0 inside
http 0.0.0.0 0.0.0.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto map outside_map 1 match address outside_cryptomap
crypto map outside_map 1 set pfs group1
crypto map outside_map 1 set peer 207.228.xx.xx
crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside_map interface outside
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcp-client client-id interface outside
dhcpd auto_config outside
dhcpd address 192.168.16.100-192.168.16.200 inside
dhcpd auto_config outside interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy GroupPolicy_207.228.xx.xxinternal
group-policy GroupPolicy_207.228.xx.xx attributes
vpn-tunnel-protocol ikev1 ikev2
username User password shbn5zbLkuHP/mJX encrypted privilege 15
tunnel-group 207.228.xx.xxtype ipsec-l2l
tunnel-group 207.228.xx.xxgeneral-attributes
default-group-policy GroupPolicy_207.228.xx.xx
tunnel-group 207.228.xx.xxipsec-attributes
ikev1 pre-shared-key *****
ikev2 remote-authentication pre-shared-key *****
ikev2 local-authentication pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f06bd1d6d063318339d98417b171175e
: end
Any ideas? Thanks.I looked over the config for Site A, but couldn't find anything unusual. Perhaps I'm overlooking something. Here is the config for site A:
Result of the command: "show running-config"
: Saved
ASA Version 8.2(1)
hostname SiteA
domain-name domain
enable password POgOWyKyb0jgJ1Hm encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.2.1 255.255.254.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns domain-lookup inside
dns server-group DefaultDNS
name-server 192.168.2.6
domain-name domain
object-group network DM_INLINE_NETWORK_1
network-object 192.168.14.0 255.255.254.0
network-object 192.168.4.0 255.255.254.0
network-object 192.168.6.0 255.255.254.0
network-object 192.168.8.0 255.255.254.0
object-group network DM_INLINE_NETWORK_2
network-object 192.168.12.0 255.255.254.0
network-object 192.168.14.0 255.255.254.0
network-object 192.168.4.0 255.255.254.0
network-object 192.168.6.0 255.255.254.0
network-object 192.168.8.0 255.255.254.0
access-list outside_1_cryptomap extended permit ip 192.168.2.0 255.255.254.0 object-group DM_INLINE_NETWORK_1
access-list inside_nat0_outbound extended permit ip 192.168.2.0 255.255.254.0 object-group DM_INLINE_NETWORK_2
access-list inside_nat0_outbound extended permit ip any 192.168.15.192 255.255.255.192
access-list inside_nat0_outbound extended permit ip 192.168.2.0 255.255.254.0 192.168.16.0 255.255.254.0
access-list VPNGeo_splitTunnelAcl standard permit any
access-list outside_2_cryptomap extended permit ip 192.168.2.0 255.255.254.0 192.168.6.0 255.255.254.0
access-list outside_3_cryptomap extended permit ip 192.168.2.0 255.255.254.0 192.168.4.0 255.255.254.0
access-list outside_4_cryptomap extended permit ip 192.168.2.0 255.255.254.0 192.168.8.0 255.255.254.0
access-list outside_5_cryptomap extended permit ip 192.168.2.0 255.255.254.0 192.168.16.0 255.255.254.0
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool GeoVPNPool 192.168.15.200-192.168.15.254 mask 255.255.254.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable 444
http 192.168.2.0 255.255.254.0 inside
http 0.0.0.0 0.0.0.0 inside
http 0.0.0.0 0.0.0.0 outside
http authentication-certificate inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set pfs group1
crypto map outside_map 1 set peer 207.228.xx.xx
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map 2 match address outside_2_cryptomap
crypto map outside_map 2 set pfs
crypto map outside_map 2 set peer 208.119.xx.xx
crypto map outside_map 2 set transform-set ESP-3DES-SHA
crypto map outside_map 3 match address outside_3_cryptomap
crypto map outside_map 3 set pfs group1
crypto map outside_map 3 set peer 208.119.xx.xx
crypto map outside_map 3 set transform-set ESP-3DES-SHA
crypto map outside_map 4 match address outside_4_cryptomap
crypto map outside_map 4 set pfs
crypto map outside_map 4 set peer 208.119.xx.xx
crypto map outside_map 4 set transform-set ESP-3DES-SHA
crypto map outside_map 5 match address outside_5_cryptomap
crypto map outside_map 5 set pfs group1
crypto map outside_map 5 set peer 70.64.xx.xx
crypto map outside_map 5 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
management-access inside
dhcp-client client-id interface outside
dhcpd auto_config outside
dhcpd address 192.168.2.100-192.168.2.254 inside
dhcpd auto_config outside interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy VPNGeo internal
group-policy VPNGeo attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value VPNGeo_splitTunnelAcl
username user password shbn5zbLkuHP/mJX encrypted privilege 15
username namepassword vP98Lj8Vm5SLs9PW encrypted
username nameattributes
vpn-group-policy VPNGeo
tunnel-group 207.228.xx.xxtype ipsec-l2l
tunnel-group 207.228.xx.xxipsec-attributes
pre-shared-key *
tunnel-group VPNGeo type remote-access
tunnel-group VPNGeo general-attributes
address-pool GeoVPNPool
default-group-policy VPNGeo
tunnel-group VPNGeo ipsec-attributes
pre-shared-key *
tunnel-group 208.119.xx.xxtype ipsec-l2l
tunnel-group 208.119.xx.xxipsec-attributes
pre-shared-key *
tunnel-group 208.119.xx.xx type ipsec-l2l
tunnel-group 208.119.xx.xx ipsec-attributes
pre-shared-key *
tunnel-group 208.119.xx.xxtype ipsec-l2l
tunnel-group 208.119.xx.xxipsec-attributes
pre-shared-key *
tunnel-group 70.64.xx.xxtype ipsec-l2l
tunnel-group 70.64.xx.xxipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:e3adf4e597198f58cd21e508aabdbab9
: end -
I have applied IPsec policy on local machine(ip address:10.82.138.76) with windows server 2008 ent r2 installed,only permit local machine to comunicate with itself,one other server(ip address:10.82.138.77) and the gateway device(ip address:10.82.138.1).After
i asigned this policy,i can ping the gateway (ip address:10.82.138.1),and the other server(ip address:10.82.138.77),but i can't ping local machine itself(ip address:10.82.138.76),could anybody tell me why and how to solve this problem?When i applied the same
policy to windows server 2003 ent,i can ping the local machine ip address.Hi,
Thanks for your post.
First, try to ping the loopback address 127.0.0.1. If the loopback test succeeds but you cannot ping the local IP address, please post the unedited
ipconfig /all and route print of the problematic computer.
For test purpose, you may refer to the following lab step by step guide to deployment Tunnel Mode IPsec. Hope it helps.
Windows Firewall and IPsec Policy Deployment Step-by-Step Guide
http://technet.microsoft.com/en-us/library/cc732400(v=ws.10)
Connection Security and IPsec
http://technet.microsoft.com/en-us/library/cc771593(v=ws.10).aspx
Connection Security Rule Wizard: Tunnel Endpoints Page - Client-to-Gateway
http://technet.microsoft.com/en-us/library/dd759083
Best Regards,
Aiden
Aiden Cao
TechNet Community Support -
Copy db 9i 32bit to other server and upgrade to 10g 64bit, how?
Hi there,
im trying to upgrade this 9i database 32bits that is in red hat enterprise 3, to other server that has red hat enterprise 5 64bits, but i couldnt make it work. searching i realice that 9i isnt certified by oracle to work in red hat enterprise 5 and im thinking that the other problem is the difference in 32 to 64bits,
so the next think i want to try, is making the upgrade to 10g in the source server (red hat enterprise 3 32bit) and then move this database 10g to the other server (red hat enterprise 5 64bit), looking Oracle Doc ID "+[ID 341880.1] How to convert a 32-bit database to 64-bit database on Linux?+" i found how to do it, but there isnt clear if the conversion of 32 to 64 can be make it between servers, i mean
- taking 32bit database and copying to the 64bit server
- make 32bit database work in the new server
- convert the database from 32 to 64bit
does anyone knows if this can be made or the path to make it?
Regards,
ASHi;
Follow below
1.Perform cold backups of the existing Oracle9i
2.install the 64-Bit release Oracle software on target
3.Close 32bit db cleanly
4.Copy 32 bit db files to target
5.copy initora file (initsid.ora) to the new Oracle home and edit it(If your path will be same as your source than you may not need to edit this file)
6. Than follow How to convert a 32-bit database to 64-bit database on Linux? [ID 341880.1] << step 9
Regard
Helios -
I bought a faik programme how can I inform other people and get my money back
I bought a faik programme from Apple Store.How can I get my money back and how can I inform other people to get out from this trap.Although I wrote comments on the application ,I could not see anything on the application comment forum.Application is also promising 5 free movie if you rate it high !!!
This is a user-to-user support forum. For refund requests contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
tt2 -
I am running 64bit version - can not get into istore but can get to other web sites. i have checked my settings i nIE
Hello trobrie
Start with the article below, it will provide multiple troubleshooting options as well as a link with more advanced troubleshooting steps.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G. -
Can a single Weblogic server host more than one Apex Listener?
Hi All:
Is it possible to deploy more than one APEX listener on a Weblogic server to service multiple APEX installations on different Database hosts?
I suspect it is just a matter of port configuration and deployment naming but has anyone experience with this?
Regards,
DavidHi David,
it is possible to have multiple instances of the APEX Listener deployed on the same JEE container. I didn't actually do this with WLS, but I don't know any reason why this should be different on WLS than it would be on other JEE containers.
You should start by preparing the apex.war to have the parameter config.dir set in the web.xml . We chose to let it point to a base directory for all config files having one subdirectory for each deployed instance, so we have to do this only once with every new release that comes in. By the way, this is the first location of the sequence to be checked by the APEX Listener upon startup.
Then you can deploy this war file multiple times giving each instance a different application name/context root. We chose +<apex_dbname>+ as pattern for this, but that's up to you.
Note that you may have to provide the static files ("images") for APEX multiple times as well if you don't have the same APEX version on each instance or if you use different custom files that shall not be the present on each instance or in different versions for at least some instances.
In that case, you'll have to configure your WLS to provide multiple "images-applications" as well. We chose to have one for each instance and use +</i_<dbname>/+ as pattern here. If you used the default image prefix +/i/+ so far, you can reset it using the corresponding script provided in the APEX installation package. I'd recommend to use the script version of the package that corresponds to the APEX version of the instance you want to configure.
That might sound complicated, but actually it's not. It's just a few things to keep in mind before starting and once you've set it up, it's really easy to handle.
-Udo -
Dynamin VPN/GRE can't ping other side of tunnel
I am new at this VPN stuff and tryiong to setup a GRE Dynamic IP VPN between my offfice and home. Here is what I ahve done thus far:
OFFICE
interface Tunnel0
ip address 172.30.1.1 255.255.255.252
no ip redirects
ip mtu 1400
ip nhrp map multicast dynamic
ip nhrp network-id 1
ip tcp adjust-mss 1360
tunnel source FastEthernet0/0
tunnel mode gre multipoint
tunnel key 1
interface FastEthernet0/0
ip address 40.197.68.9 255.255.255.248
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
HOME
interface Tunnel0
ip address 172.30.1.2 255.255.255.252
ip mtu 1400
ip nhrp map multicast 40.197.68.9
ip nhrp map 172.30.1.1 40.197.68.9
ip nhrp network-id 1
ip nhrp nhs 172.30.1.1
ip tcp adjust-mss 1360
tunnel source GigabitEthernet0/0
tunnel destination 40.197.68.9
tunnel key 1
interface GigabitEthernet0/0
description Router
ip address 192.168.30.1 255.255.255.252
duplex auto
speed auto
When I ping 172.30.1.1 from the HOME router, I get 0/5 success. Not good! I have not setup any IPSec yet.
Results for HOME router
show ip nhrp nhs detail
Legend: E=Expecting replies, R=Responding, W=Waiting
Tunnel0:
172.30.1.1 E priority = 0 cluster = 0 req-sent 53 req-failed 0 repl-recv 0
sh int t0
Tunnel0 is up, line protocol is up
Hardware is Tunnel
Internet address is 172.30.1.2/30
MTU 17912 bytes, BW 100 Kbit/sec, DLY 50000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation TUNNEL, loopback not set
Keepalive not set
Tunnel source 192.168.30.1 (GigabitEthernet0/0), destination 40.197.68.9
Tunnel Subblocks:
src-track:
Tunnel0 source tracking subblock associated with GigabitEthernet0/0
Set of tunnels with source GigabitEthernet0/0, 1 member (includes iterators), on interface <OK>
Tunnel protocol/transport GRE/IP
Key 0x1, sequencing disabled
Checksumming of packets disabled
Tunnel TTL 255, Fast tunneling enabled
Tunnel transport MTU 1472 bytes
Tunnel transmit bandwidth 8000 (kbps)
Tunnel receive bandwidth 8000 (kbps)
Last input 00:40:28, output 00:00:25, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/0 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
106 packets output, 12612 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 output buffer failures, 0 output buffers swapped out
sh ip route
Gateway of last resort is 192.168.30.2 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 192.168.30.2
10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
C 10.110.0.0/24 is directly connected, GigabitEthernet0/1.110
L 10.110.0.1/32 is directly connected, GigabitEthernet0/1.110
C 10.115.0.0/24 is directly connected, GigabitEthernet0/1.115
L 10.115.0.1/32 is directly connected, GigabitEthernet0/1.115
172.16.0.0/30 is subnetted, 1 subnets
S 172.16.2.0 [1/0] via 192.168.30.6
172.30.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.30.1.0/30 is directly connected, Tunnel0
L 172.30.1.2/32 is directly connected, Tunnel0
S 192.168.2.0/24 is directly connected, GigabitEthernet0/0
S 192.168.10.0/24 is directly connected, GigabitEthernet0/0
192.168.30.0/24 is variably subnetted, 4 subnets, 2 masks
C 192.168.30.0/30 is directly connected, GigabitEthernet0/0
L 192.168.30.1/32 is directly connected, GigabitEthernet0/0
C 192.168.30.4/30 is directly connected, GigabitEthernet0/1.30
L 192.168.30.5/32 is directly connected, GigabitEthernet0/1.30
S 192.168.50.0/24 [1/0] via 192.168.30.6
192.168.69.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.69.0/24 is directly connected, GigabitEthernet0/1.69
L 192.168.69.3/32 is directly connected, GigabitEthernet0/1.69
S 192.168.100.0/24 [1/0] via 192.168.30.6
S 192.168.125.0/24 [1/0] via 192.168.30.6
S 192.168.200.0/24 [1/0] via 192.168.30.6
sh dmvpn
Interface: Tunnel0, IPv4 NHRP Details
Type:Spoke, NHRP Peers:1,
# Ent Peer NBMA Addr Peer Tunnel Add State UpDn Tm Attrb
1 50.197.68.90 172.30.1.1 NHRP 02:30:17 S
Results for OFFICE router
show ip nhrp nhs detail
sh dmvpn
sh int t0
Tunnel0 is up, line protocol is up
Hardware is Tunnel
Internet address is 172.30.1.1/30
MTU 17912 bytes, BW 100 Kbit/sec, DLY 50000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation TUNNEL, loopback not set
Keepalive not set
Tunnel source 40.197.68.9 (FastEthernet0/0)
Tunnel Subblocks:
src-track:
Tunnel0 source tracking subblock associated with FastEthernet0/0
Set of tunnels with source FastEthernet0/0, 1 member (includes iterators), on interface <OK>
Tunnel protocol/transport multi-GRE/IP
Key 0x1, sequencing disabled
Checksumming of packets disabled
Tunnel TTL 255, Fast tunneling enabled
Tunnel transport MTU 1472 bytes
Tunnel transmit bandwidth 8000 (kbps)
Tunnel receive bandwidth 8000 (kbps)
Last input 00:43:56, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/0 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 output buffer failures, 0 output buffers swapped out
show ip route
S* 0.0.0.0/0 [1/0] via 40.197.68.94
40.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 40.197.68.8/29 is directly connected, FastEthernet0/0
L 40.197.68.9/32 is directly connected, FastEthernet0/0
172.30.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.30.1.0/30 is directly connected, Tunnel0
L 172.30.1.1/32 is directly connected, Tunnel0
S 192.168.2.0/24 [1/0] via 192.168.10.5
192.168.10.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.10.0/24 is directly connected, FastEthernet0/1
L 192.168.10.1/32 is directly connected, FastEthernet0/1
S 192.168.69.0/24 is directly connected, FastEthernet0/0
Why can't Io ping from the HOME router to the OFFICE router?I fugured this problem out. I needed to setup PKI/IKE and once that was done on both routers, my tunned now passes some data.
-
I am using windows 7 and have used Firefox many years the last time I upgraded I could not connect to the World Wide Web sites but the direct connect sites ie. LOTRO work fine. Internet Explorer comes up with a "proxy server is not responding" and dose not load the page. When I follow the instructions to change the proxy server settings the page to do that all of the proxy buttons and wording is grayed out, not changeable. The other computers in the house work fine. The Upgrade of Firefox seem to corrupted the program for the proxy control.
jmaraszekNote that your System Details List shows that you have a user.js file in the profile folder to initialize some prefs on each start of Firefox.
The user.js file is only present if you or other software has created it, so normally it wouldn't be there.
You should check its content with a plain text editor if you didn't create this file yourself.
The user.js file is read each time you start Firefox and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
You do the network.proxy settings show on the <b>about:config</b> page?
network.proxy.type
network.proxy.http
network.proxy.http_port
Do they show as locked (italic)? -
If I buy a Mac Mini Server, can I remove Lion Server and just keep OS X Lion?
This is because it has much better specs than the regular ones.
Here was my solution to removing the 'server' software and running with standard Lion.
https://discussions.apple.com/thread/3108472?start=0&tstart=0
I had issue running certain software on the server version and now my machine just runs regular Lion as opposed to Snow Leopard server the issues are gone.
If you have multiple Macs you also only pay for OS X Lion once and not have to spend the extra on the server version.
Maybe you are looking for
-
Issue in Creation of Periodicals for Contracts in CRM7.0
Hello, I have a requirement to create Contracts in CRM7.0 system. And I am doing this using the BAPI *BAPI_BUSPROCESSND_CREATEMULTI* Good part is Contract Order gets created, but onlywith Header Details. The issues i am facing -- 1. I need to know wh
-
I have Photoshop CC 2014 installed and updated on a Win7 machine and a Win8.1 machine. When I go to edit>preferences>sync settings, everything is checked, but it seems that only my workspace settings get uploaded. It never seems to transfer my swat
-
Is CR or Live Office mandatory before installing Integration kit for SAP ?
Is CR or Live Office mandatory before installing Integration kit for SAP ? Can you please provide the check list about what are the things need to take care before installing Integration kit for SAP on BOXI 3.1 sp3. Regards Jeethender
-
MacBookPro OS 10.8.2, up to date. Have I fxxxxx up? Is it in OS version? Might I have etension conflict? -- lots of apps I intall for specific purpose and then store in separate folder. Downloads too, DMG, ZIP. 4 GB RAM, 105 GB free on 250 GB HDD, an
-
Apple Care Protection for previously purchased iPod...
Is it possible to buy an Apple Care plan for an iPod that has already been purchased and not purchased from an Apple Store?