Can't record with my MOTU 896 in Audition 1.5 - halp!

I have a MOTU 896 (the old one, not the HD or the other new one), and I'm trying it out again for the first time in about a year.
The MOTU is picking up the mic, but Audition (I'm using 1.5) won't record a darned thing. The computer is recognizing the device. I have the device options set to use the MOTU in Edit Mode, and I have it at the top of the device order. I've tried both the analog and digital options. Nothing.
That's a really expensive piece of hardware to be using as a paperweight, so... any ideas?

Try going to Options>Device Properties>Wave In and set the MOTU to 4 byte PCM and put a check in the 'try as WDM' box. Also, make sure there's a check in 'Use in Edit View'....
My Traveler, which uses essentially the same driver, works fine with 1.5 and these settings.

Similar Messages

  • Can i record with more than one audio interface

    I need to record 16 tracks, I have two different audio iterface, in GarageBand i can only find one of them, if i go to prefrenses-audio, I can set any of them as my audio interface, but only one at the time.
    Any tips to how I can use bouth simultanious? Cubase, Logic mabye, GarageBand no can do? :-)

    josteinfromoslo wrote:
     can i record with more than one audio interface
    yes, create an aggregate device:
    http://www.bulletsandbones.com/GB/Tutorials.html#allaboutaggregatedevices
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    josteinfromoslo wrote:
    I need to record 16 tracks
    GB can only record 8 tracks at a time, however that is 16 channels, so with some extra effort you can get the outcome you desire, see the second tip here:
    http://www.bulletsandbones.com/GB/TricksHacks.html

  • How can I record with GarageBand 1.3 in the background using other app?

    How can I record with GarageBand 1.3 in the background using other app?
    I use iPad 2 with iOS 6 and GarageBand v1.3.
    I'd like to play an other app like Sunrizer synth while the GarageBand is recording in the background in a track.
    By now I can do it only using the build-in mic of iPad, but this is not the point.
    Can I record other apps in a GarageBand track?
    Thanks a lot for your time.

    I suspect you are probably correct about the reasoning, although there are already a myriad of ways to do that.
    Don't get me wrong - I never said I like this. But it is consistent with other Apple applications, that are similar restrictive; you cannot take a screenshot, when dvd-player is running for example.
    That are the moments, when I am glad that MacOS X is a unix system under the hood

  • Problem Recording with a MOTU Ultra Lite

    Hi, everyone:
    I'm not getting any green bar movement on the audio/recording display. It worked yesterday, but now, suddenly, nothing. Here's the thing: I CAN RECORD. My MacBook Pro is showing a connecton with the MOTU - the meter goes up and down in system preferences. Also, the MOTU is showing a connection with my MacBook - meter on MOTU going up and down.
    But in FCP X...no green in recording meter. Yet I AM recording. Difficult to monitor levels, obviously.
    I checked the channel (channel 1, mono, only one mic). Everything seems OK.
    Thanks either way

    Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

  • Can't record with Sound Blaster Live Va

    I have a Sound Blaster Li've Value (on-board) card and can't record streaming audio with it. It plays streaming audio fine, and seems to record it, but the resulting wav or mp3 files are "empty", playing them results in silence. I noticed that there was an old thread about this, but I couldn't find a reply. I tried to find out if this sound chip was indeed full duplex, but couldn't find that information. Any help would be greatly appreciated.
    Cheers,
    Ron

    I have the same message error.
    "The SBPCI Interrupt has been routed incorrectly by the system. AudioPCI Inacti've. Use Automatic setting in the Device Manager."
    I have a Compaq computer and win 98. Ever since we moved, the speakers stopped working.
    I tried going thru system properties and Device manager...it shows that the device is working properly. And the Automatic setting box was already checked. I bought new speakers thinking the speakers were bad but I still get no sound. I followed all the steps for Sound Troubleshooting. I did notice when I went to control panel, multimedia, devices, audio...one of the sound cards said: driver is enabled but inacti've due to an unknown problem. But it didn't tell me how to fix the problem?
    I don't know how to get the sound.
    Can someone help me? I really don't know anything about the computers.
    Thanks in advance.

  • New ipod 60GB can you record with it?

    Hi,
    I have a new 60GB ipod. Can I record, by pluging a mic into the headphone jack? If I can record with the ipod, do i need to download some software onto my ipod? Where are the settings, to start recording?
    Thanks

    You can't just plug in any mic.
    Here are a couple of options for now...
    http://www.xtrememac.com/audio/earphones_recorders/micromemo.php
    iTalkPro
    Hopefully more options will be available soon,
    btabz

  • How can i records with date format using web services?

    Hello
    I can't record date records using web services. I get no message errors.
    I can import string values but no dates (YYYY-MM-DD). Do you have any clue about that?
    Regards
    Arturo

    hello,
    That's the code I'm using to update an opportunity. In the date fields (e.g. dFecha_de_entrega_al_cliente) I've tried to put an specific date in the correct format (If i put it in another format i've got an error message due the wrong format). The CRM accepted the code but it didn't update the values that are different of string.
    I don´t know if there is something missing in teh program or if the developer environment is not the adequate.
    Regards for your comments
    Arturo
    Private Sub ActualizarOportunidad(ByVal fila As Data.DataRow, ByVal TipoPersona As String)
    Dim oLog As New Log()
    Dim IdLog As Integer
    Dim NumSerie As String = ""
    Try
    oLog.Insert_Log("Activación Garantía - Crear Oportunidad", oLog.GetLastIdProceso())
    IdLog = oLog.GetLastId()
    Dim sr_input As Opportunity.OpportunityUpdate_Input
    Dim sr_output As Opportunity.OpportunityUpdate_Output
    sr_input = New Opportunity.OpportunityUpdate_Input
    Dim sr(1) As Opportunity.OpportunityData
    sr(0) = New Opportunity.OpportunityData
    NumSerie = fila("NumeroSerie").ToString().Trim()
    sr(0).ExternalSystemId = NumSerie
    sr(0).OpportunityName = fila("NumeroSerie").ToString().Trim()
    sr(0).SalesStage = "Deseo" '"Cerrada/Ganada"
    sr(0).dFecha_de_entrega_al_cliente = fila("FechaEmision").ToString().Trim()
    sr(0).dFecha_de_facturacin_al_cliente = fila("FechaCompra").ToString().Trim()
    sr(0).stNro_Factura = fila("NumeroFactura").ToString().Trim()
    sr(0).plActividad_Economica = fila("IdActividad").ToString().Trim()
    sr(0).plTipo_de_Venta = fila("TipoCompra").ToString().Trim()
    sr(0).CustomObject8ExternalSystemId = fila("ApellidoVendedor").ToString.Trim()
    'sr(0).CustomObject8ExternalSystemId = IIf(TipoPersona = "J", fila("DocumentoE").ToString().Trim(), fila("Documento").ToString.Trim())
    'sr(0).CustomObject7ExternalSystemId = fila("")
    Dim lofsr As Opportunity.ListOfOpportunityData
    lofsr = New Opportunity.ListOfOpportunityData
    lofsr.Opportunity = sr
    sr_input.ListOfOpportunity = lofsr
    sr_output = oOpportunity.OpportunityUpdate(sr_input)
    oLog.Update_Log(IdLog, "Si", NumSerie, "")
    Catch ex As SoapException
    Me.txtError.Text = ex.Detail.InnerText.ToString()
    oLog.Update_Log(IdLog, "No", NumSerie, ex.Detail.InnerText.ToString())
    End Try
    End Sub
    ************************************************************************

  • How many min. can i record with voice record with MuVo V200 1

    Hi,
    I'm going to buy the Creative MuVo V200 GB.
    Now my questions about this player.
    How many minutes can i record over voice recording.
    Maybe someone can tell me how much Megabytes minute of recording will take.
    Are there different quality levels of recording?
    In which format does the player save the recordings?
    I will use the player to record lectures at the uni'versity.
    Did anyone have done this?

  • Can I record with an external mic via my DV camera?

    I have a recording setup with a prosumer DV camera with an external mic. I have been using the voiceover tool in FCP to record VO, but now I have Soundtrack Pro and want to use that for recording VO. Can I do this? If so how? Also can someone tell me - does Garageband still have a place fro creating custom scores now that I have ST Pro? Thansk

    Your Mac does not have a microphone input, only a line-level input (in fact, no Mac has included a microphone input in quite a while). So you'll need 1) a self-powered microphone that outputs line level, 2) a USB microphone, or 3) an external audio device that supports microphone inputs, either a mixer that will give you line-level output or a USB audio input device. One possibility for a USB device that works for many people and that is relatively inexpensive (ca $40.00 US) the Griffin iMic. It works with any standard personal computer microphone.
    Hope this helps.

  • Can't Record with Audigy 4 Pro - Please He

    I've done several searches and read posts until my eyes crossed and haven't found the solution yet so here goes... I've had the Audigy 4 pro card for over a year and tried a couple of times to record but couldn't so I would just go away thinking I would figure it out later... Later is?today. I'm trying to record some of my vinyl (records) onto my computer in 24/96. I have a turntable with a pre-amp connected to the outboard Audigy box into the Line-3 RCA inputs. I can play my albums through the system with no problems at all. Good sound, plenty of volume (same as any other source). I set the recording source in the mixer?as Line-3 and "What you hear", when I go to the Media Source Player to record, the correct source shows up. I hit record, save the file,?and I get no?audio on the resulting file. I tried other output formats (mp3, etc) and still no audio on the resulting file. The monitor bars are checked on the Media Source player and they show no activity during recording. I also tried to record off a CD with the same results. Once again, the system plays fine it just won't record. Thanks for any and all help!

    Thanks for the response!?I can't get anything (CD, Wave, Mic, Line) to record at any of the settings (MP3, WMA, 44.-6), The Audigy is set as the Default Recording Device. The mixer is set up with the correct (and unmuted) source on the record slider. I've not tried Wavelab light, is it part of the Creative bundle or do I need to pull it off the install CD??Thanks again for the help.

  • Can't record with Toshiba DVR D-R410KU

    Phasing out my VCR - bought a DVR - Toshiba Model - D-R410KU. I can not get this thing to record to save my life. I can get it to play DVDs just fine. When I try to record I can not see the TV screen either - it's just a blue screen. Should there not be something like with a VCR that is TV/VCR or SOMETHING? I already set the L1/L2 - so I don't think it's that. I am using RCA cables and have cable TV. Any suggestions? I'm really new at this so not sure what info I need to submit for someone to better help me - so if you have questions and need more detail let me know. I would really love to keep this thing - I hate standing in line to return items!! One thing about this DVR - It's not easy to run in the least!!

    That just leads me to their tech support which is no help at all! Is there a DVR that anyone knows of that can record without being on that specific channel? I'm taking this thing back - if it's that hard to record then I'll just exchange it.

  • Can I record with the t5?

    Just got the camera and can not find the record button.
    Thanks
    Solved!
    Go to Solution.

    Isn't there a small button with a red circle next to it right by the viewfinder?  Yes, that is it.  
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 9, Lightroom 6

  • Just bought a new iPod touch 16G - I think it's a 5th gen. - I used my old iPod to record rehearsals.  The new one is stating that my Belken mic is not compatible.  Can I record with this new one?  If so, what do I need for a mic?

    Just bought a new iPod Touch 16G - (I think it's a 5th gen.).   I used my old iPod to record music rehearsals.  This new iPod is stating that my old Belken mic (with new adaptor) is not compatible.  Does this new iPod Touch have ability to record audio?     If so, what do I need for a mic??

    Thanks very much!   I found the app, tested it, and it sounds fairly lifelike.    Big help!!

  • Can't record with metronome on

    I'm using a 20" iMac 1.8GHz g5 with 512mb ram, 40 gigs free on the hard drive and OS 10.3.9. I have garageband 1.1.0 and I am using an M-audio Mobile Pre USB. I have no problem with recording or playback with the metronome turned off. When I turn the metronome on it ticks for one or two beats and then stops recording or playback (which ever I am trying to do). I have already followed the steps for optimizing garageband. Any help would be great. I also get the following warning when i start garageband "Mac OS X MIDI Services not available."
    thanks,
    Craig

    Hey Cab0899,
    Thanks for the question. If I understand correctly, you were having trouble with messages on 2 iOS devices. What was the error you were getting when you were trying to text? I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    iOS: Troubleshooting Messages - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • Query Based VO Can insert record (With out EO)

    I have question.
    I have Query Based VO (Not belongs to any EO).
    I need insert record using that.
    Is it possible?
    Hope quick response.

    No.

Maybe you are looking for

  • I can't watch received video messages on iPhone

    Someone in a group message sends a phone number to call a client - there doesn't seem to be a way to copy the phone number to the iphone dialer, or to tap the number to call from iphone, or even to tap to call from skype if we had skype credit. Is th

  • Web service in OSB

    Hi All, I am brand new to OSB, i was giving a schema to develop a web service with in OSB. How do i start? what are the steps? Please help its urgent.

  • RSTG_BUPA Push BW View to CRM

    Hi Folks RSTG_BUPA transaction allows BW to push query views into CRM for target groups. Target groups are created with reference to specific marketing activities, for example, an e-mail marketing campaign intended to introduce a new product or a tel

  • Transforming image inside of a drop zone?

    I placed an image into a drop zone in a template in Motion 4, and it is too big to display the whole graphic. I cropped the image and re-imported it into the drop zone, though it is still dot displaying the whole width of the text on the graphic. How

  • Please restart InDesign-Return to Finder

    Process:         Adobe InDesign CS6 [3579] Path:            /Applications/Adobe InDesign CS6/Adobe InDesign CS6.app/Contents/MacOS/Adobe InDesign CS6 Identifier:      com.adobe.InDesign Version:         8.0.1.406 (8010) Code Type:       X86 (Native)