Can't run Domain Configuration Wizard in GUI mode
I work on a Java development team where each developer has a local WebLogic 10.3.2 server for Windows x86 installed. A small handful of these developers are unable to run the Domain Configuration Wizard (i.e. <WLS_HOME>\common\bin\config.cmd) in GUI mode. When they start it the splash screen will appear briefly and then disappear with nothing more to see. The majority of the developers have no problem with this. Where should I start looking to identify the possible causes for this problem?
I will suggest following:
1) instead of clicking on config.cmd in windows browser; run config.cmd at command prompt. You can see error there
2) check version of java, and if it is certified.
3) as an alternate you can start the installer in console mode using 'config.cmd -mode=console'
Similar Messages
-
Memory error while running DI configuration wizard
Hi
We have installed NW 7.0 with DI usage. After Installation, we are running DI configuration Wizard. During step (at 48% ) Assign Role NWDI.XDeveloper to Group NWDI.XDevelopers its giving error:
Exception Class:java.lang.OutOfMemoryError
Following is the screen shot of error:
Assign Role NWDI.XDeveloper to Group NWDI.XDevelopers
Description
No specified detailed description
State
START_ACTION
Support Information
Type of Action
InvokeServiceDebug Events
InvokeService:Assign Role NWDI.XDeveloper to Group NWDI.XDevelopers
Library: sap.com/tclmconfig~content
SourcePath ./DIStandaloneProcess/DICommonProcess/DIUserConfigProcess/DIAssignRolesToAddtlGroups/DIInvokeAssignRoleToXDevGroup
Time 2009/02/03 at 23:38:01
WSDL /content/common/service/usermanagement/assignRoleToGroup.wsdl
InvokeService- Result: Failed
Exception Message:null
Exception Class:java.lang.OutOfMemoryError
Stacktrace
Messages at cancel time
Messages at exception time
WebDynpro
<WebDynpro> <loggedInUser>J2EE_ADMIN</loggedInUser> <initial>true</initial> </WebDynpro>
Can anybody help me solving this problem
Thanks in advanceRead,
http://help.sap.com/saphelp_nw70/helpdata/en/43/54cdc48d395f6ce10000000a1553f6/frameset.htm
That should fix your problem
regards
Juan -
Can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server
im my environment we are trying to upgrade from server 2k3 to 2k8, out testing done on server 2k3 to 2k8, but can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server ...kindly suggest
Nitin Gaurav
[email protected]Yes you can. If you have two 2003 AD servers currently and upgrade one of them to 2008 AD then they'll continue to be able to work together. The domains functional level will remain as 2003 across both servers so at this stage you won't get any benefit from
the new AD functionality available in 2008.
Once you've then upgraded the second 2003 server to 2008 you can then upgrade the functionality levels in AD to make it 2008. It's been a while, but I believe it doesn't happen automatically, so once all AD servers have been upgraded you have to go into
AD and upgrade the functionality levels yourself. -
Unable to complete: configuration Assistants in GUI mode
Dear All,
I am tring the install RAC 10g clusterware software on HPUX 11i v1 machine
I excuted the root.sh file on both nodes and then while trying to excute the VIPCA script its getting an error
and also i am not able to complete 1st step in Configuration Assistants in GUI mode
Please find the below error....Kindly help on this issue
# /opt/oracle/product/CRS/bin/vipca
PRKH-1010 : Unable to communicate with CRS services.
[Communications Error(Native: prsr_initCLSS:[3])]
PRKH-1010 : Unable to communicate with CRS services.
[Communications Error(Native: prsr_initCLSS:[3])]
PRKH-1010 : Unable to communicate with CRS services.
[Communications Error(Native: prsr_initCLSS:[3])]
# ./crsctl check crs
Failure 1 contacting CSS daemon
Cannot communicate with CRS
Cannot communicate with EVM
Regards,
VeeraHi!
I suppose your failure it's easy: your CRS server is stopped. Start it and all will be fine.
Chao! -
How to change default run-time mode at Domain configuration wizard
Hi
is there any way to change default selected value for servers start mode while you are creating a new domain based on a template, through configuration wizard? By default development mode radio button is selected but I would like to change default selection to production mode at wizard screen
thanks.Hi,
In GUI wizard there is no such option you have to select manually to change from development to production mode only.
Regards,
Kal -
Dears,
We have a problem upgrading sharepoint
From: SharePoint 2007 SP2 12.0.0.6535 - April 10 cumulative Update
To: SharePoint 2007 SP2 12.0.6557.5000 - April 11 cumulative Update
We start installing WSS CU in our standalone environment
Then we start running the SharePoint Configuration Wizard and it is failed in step 9 with the following error in "PSCDiagnostics" log:
File reader could not understand line 15679. Line was: 06/26/2011 10:11:35 1 INF Entering function PsconfigLinkLabel.LinkLabelClickedEventHandler. Error was: System.FormatException:
The string was not recognized as a valid DateTime. There is a unknown word starting
at index 24.
at System.DateTimeParse.Parse(String s, DateTimeFormatInfo dtfi, DateTimeStyles styles)
at UlsGump.Column.TimeColumn.ParseTime(StringFacade timeString)
at UlsGump.UlsEntry.SetEntryFromThread(StringFacade[] threadFacades, StringCacheFile stringCacheFile, Int64 messageLocation)
at UlsGump.UlsEntry.ReadFromUlsBuffer(Char[] buffer, Int32 bufferStart, Int32 bufferCount, StringCacheFile stringCacheFile, Int64 fileStart)
at UlsGump.FilePump.ReadJob()
Please help and advise to solve this error in order to get upgrading sharepoint succeed
Regards, Anas N. Alhussein | Sharepoint Senior DeveloperHi,
From your narration, you can clear the configuration cache, then re-run the SharePoint Configuration Wizard, check the effect.
Cleared the cache of config database by following below steps.
1. Stopped the Windows SharePoint Services Timer service.
2. Started on the SharePoint Server where Central Administration Site is hosted. Browse to
C:\Documents and Settings\All Users\Application Data\Microsoft\SharePoint\Config\
3. Deleted all the xml files. (But do not delete the cache.ini file.)
4. Then Edited the cache.ini and replaced the current value with "1".
5. Restarted the Windows SharePoint Services Timer service on the Central Admin server .
Thanks,
Rock Wang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Regards, Rock Wang Microsoft Online Community Support -
Running BI Configuration Wizard
Hi,
I am using Netweaver 04s system with BI JAVA and EP usage types and Spend Analytics installed.
Currently, all the BI configurations have been done and BU has been integrated to EP. The system is released to the users.
I had a check and found the BI configuraiotn wizard is not yet run on the server.
Is it possible to run the BI config wizard now? That after ths system is released and daily operations are running ccan we run config wizard at this point of time? Or we can just run config wizard only after the installation?
And if we run the config wizard now will it not affect the current settings and configurations?
Please suggest.
Regards,
Chintanhttp://help.sap.com/saphelp_nwpi711/helpdata/en/98/fa9b6ec510404dbcfebf35cb107c04/frameset.htm
looks like the configuration has already been made - this would make the running of the BI config wizard unnecessary and also it has restrictions on usage which need to be followed... -
Can't run Release configuration
Hi everyone,
I can run Debug configuration of my application for Mac OS X, but when I try to run Release configuration Xcode writes "The program being debugged i not being run".
I checked project settings several times. The file exists. XCode 6.2.4.
Can anyone help?Klaus (guest) wrote:
: : 8i EE for Linux i have 2 components that fails:
: : - Net8 Configuration Assistan;
: : - Oracle Database Configuration Assistant.
: now, it seems that many of us are having this "problem" taht we
: cannot install NET8 or DBCA !!
: CAN PLEASE ANYBODY OF THE GUYS WHO FOUND A SOLUTION ON THIS
: SUMMARIZE ANSD HELP u s ???!!!!!
: P L E A S E
a) Install the patch. It will take care of your problem.
b) Be a little more descriptive about the Linux version and
manufacturer. For SuSe 6.2, contact Michael Haselstein, he
did quite a bit of good work. You'll find his address easily
by searching the old postings on this group.
null -
Can you run the Import Wizard more than once at the same time?
We're going to run the Import Wizard to import content from one BO environment to another. Can we, at the same time, run the Import Wizard to import different content between those two environments (using the same source and destination both times)? Obviously we'd have to run the wizard on different workstations.
Would this cause any issues? If so, what kind of issues would you expect?
Thanks,
LauraYes, this is possible. The source and destination CMSs treat the requests from the Import Wizard like any other -- increasing the number of active Import Wizard sessions just increases the load on these CMSs. Before running multiple Import Wizard sessions, be sure there is ample processing power (CPU / memory) to handle the increased load. and of course, avoid 'touching' the same content in the two sessions in order to avoid unpredictable results.
-Mike -
Can't run Net8 Configuration Assistant & DBCA
Dear Friends,
I have the following problems - after installation of Oracle
8i EE for Linux i have 2 components that fails:
- Net8 Configuration Assistan;
- Oracle Database Configuration Assistant.
The error is the same (JAVA - class not found):
After few debuging I see that the error reason is the
following:
"can't find resource for oracle.net.ca.mesg.NetCASR_en"
When I open the jar file:
$ORACLE_HOME/product/8.1.5/network/jlib/netca.jar
I see that the class oracle.net.ca.mesg.NetCASR_en is
missing. There are:
oracle.net.ca.mesg.NetCASR_de.class
oracle.net.ca.mesg.NetCASR_es.class
oracle.net.ca.mesg.NetCASR_fr.class
oracle.net.ca.mesg.NetCASR_ja.class
oracle.net.ca.mesg.NetCASR_pt_BR.class
oracle.net.ca.mesg.NetCASR_zh_CN.class
It is very strange that there are many languages except
English language.
If in your distribution you have this class, please send to
me the class or NetCA.jar file:
oracle.net.ca.mesg.NetCASR_en.class
Regards,
Miro
nullKlaus (guest) wrote:
: : 8i EE for Linux i have 2 components that fails:
: : - Net8 Configuration Assistan;
: : - Oracle Database Configuration Assistant.
: now, it seems that many of us are having this "problem" taht we
: cannot install NET8 or DBCA !!
: CAN PLEASE ANYBODY OF THE GUYS WHO FOUND A SOLUTION ON THIS
: SUMMARIZE ANSD HELP u s ???!!!!!
: P L E A S E
a) Install the patch. It will take care of your problem.
b) Be a little more descriptive about the Linux version and
manufacturer. For SuSe 6.2, contact Michael Haselstein, he
did quite a bit of good work. You'll find his address easily
by searching the old postings on this group.
null -
Domain configuration fails in console mode
Hi everybody,
I've got a problem trying to configure a domain based on Portal Template.
If I use the wizard all works fine but if I try to use the custom mode I get a Security Configuration error.
It happens but I didn't change any security parametrs, I'd not added users or groups, I didn't enter in security session.
Did anyone get the same problem?
My system is a Solaris (I get the error with both 9 and 8 version) on Sun Spark and Weblogic Platform 8.1
Thanks a lot
MassimilianoHi,
There is no console mode in WebLogic 12.1.2. It has been remove.
See MOS note: "WebLogic Server 12.1.2 Generic Install Jar File Fails To Recognize Console Install Mode (Doc ID 1577869.1)"
Regards Peter -
Can I run DW4 in Safe/Single User mode?
I have downloaded DiskWarrior 4, biut I am unable to create a boot disc from the .dmg file. Is it possible to run the DW4 application from Safe Boot/Single User mode?
Once you get the physical CD in the mail, that one should boot your computer. Until then, you'll have to boot from a different drive.
I keep a copy of OS X installed on my iPod for troubleshooting purposes. It's got DiskWarrior, the AppleCare TechTool, Intech Speed Tools, etc. installed on it. -
How can i run the ie extension in compatibility mode
I have installed the IE extension but I need to view a web page in IE Compatibility Mode. Does anyone know how to do that? Thx in advance.
Maybe the extension's author can answer that. Usually there is a support link on the download page on the Add-ons site.
On another subject, the forum software detected your Firefox as version 15. Is that correct?
Version 15 is not secure; Mozilla discloses [https://www.mozilla.org/security/known-vulnerabilities/firefox.html security flaws] after each new release. Is something holding you back from upgrading to Firefox 26? Please let us know so we can suggest solutions or workarounds.
If Help > About Firefox shows Firefox 26.0, you may need to clear the preference that is misreporting your version number. See: [[Websites say that Firefox is outdated or incompatible even though it's the latest version]]. -
SharePoint 2013 Configuration Wizard Missing Components after Install ServicePack 1
Hello,
today we have installed SharePoint Service Pack 1 for SharePoint Server 2013 inclusive Service Pack 1 for all language packs (we used the new released Service Packs).
Our SharePoint Environment has only one SharePoint Server.
Many
language packs
are
installed
on
this
server.
If we try to run the configuration wizard through the GUI, then we get the following error:
If we try to run "psconfig -cmd upgrade -inplace b2b -wait" then we get also an error:
SharePoint Products Configuration Wizard version 15.0.4569.1503. Copyright (C) Microsoft Corporation 2012. All rights reserved.
The upgrade command is invalid or a failure has been encountered.
The server farm will not work with missing installs. Add "-cmd installcheck -noinstallcheck" to the command-line to ignore this warning.
The following is missing on :
Service Pack 1 for Microsoft SharePoint Server 2013 Language Pack (KB2880554) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 Language Pack (KB2880554) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
We checked the Installation in "Programm and Features", result see below:
Next step we run the PowerShell command: Get-SPProduct -local, result see below:
ProductName
Required Missing Servers
Language Pack for SharePoint 2013 - Bulgarian/български True
{ServerName, }
Language Pack for SharePoint 2013 - Croatian/Hrvatski True
{ServerName, }
Language Pack for SharePoint 2013 - Romanian/Română
True {ServerName, }
Language Pack for SharePoint 2013 - Thai/ไทย
True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Chinese (PRC)/中文(简体) True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Chinese (Taiwan)/中文 (繁體) True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Czech/čeština True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Danish/dansk True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Dutch/Nederlands True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Finnish/suomi True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - French/Français True {ServerName,
Language Pack for SharePoint and Project Server 2013 - German/Deutsch True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Greek/Ελληνικά True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Hebrew עברית True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Hungarian/magyar True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Italian/Italiano True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Japanese/日本語 True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Korean/한국어 True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Norwegian/norsk True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Polish/Polski True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Portuguese/Português True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Portuguese/Português (Brasil) True {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Russian/русский True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Slovak/Slovenčina True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Spanish/Español True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Swedish/svenska True {ServerName,
Language Pack for SharePoint and Project Server 2013 - Turkish/Türkçe True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Ukrainian/Українська True {ServerName, }
Microsoft SharePoint Server 2013
True {ServerName, }
What's the mistake?
Why we can't run the configuration wizard?
Has anyone answers?
Thanks a lot.
Regards Mariotry to run the below command on all server in the farm and then run the config wizard
Get-SPProduct -Local
Above command basically update the product information into the configuration database. Read this blog from the Trevor.
http://thesharepointfarm.com/2013/12/the-magic-of-get-spproduct-local/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Does anyone know the call to make to run the domain configuration wizard in silent
mode (directly, without using the weblogic installer)?
Thanks,
JamesHello all, I am trying to execute the domain configuration wizard in silent mode,
but appear to be having some classpath problems. The class that is complains
about not finding exists in the weblogic.jar of the ebcc and server lib, but I
have tried several times and different ways (ie. export CLASSPATH, pass -classpath,
execute set-environment, etc.) to include these classes in the classpath. Any
help would be greatly appreciated. The wizard still returns that it completed
successfully, however, all of the files for the domain template have not been
copied to the new instance. An excerpt from the dmwiz filent log containing the
error receieved is as follows:
2002-12-17 22:19:47,198 INFO [dwstringsubs] com.bea.wizard.domain.tasks.DWStringSubsTask
- pname=WLS_PASSWORD before=@B
EA_WEBLOGIC_SERVER_ADMIN_PASSWORD@ after=$C_password$ value=q1w2e3r4
2002-12-17 22:19:47,199 INFO [dwstringsubs] com.bea.wizard.domain.tasks.DWStringSubsTask
- pname=WL_HOME before=@WL_HOM
E after=$USER_INSTALL_DIR$ value=
2002-12-17 22:19:47,199 INFO [dwstringsubs] com.bea.wizard.domain.tasks.DWStringSubsTask
- pname=BEAHOME before=@BEA_HO
ME after=$BEAHOME$ value=
2002-12-17 22:19:47,200 INFO [dwstringsubs] com.bea.wizard.domain.tasks.DWStringSubsTask
- pname=JAVA_HOME before=@JAVA
HOME after=$JAVAHOME$ value=
2002-12-17 22:19:47,200 INFO [dwstringsubs] com.bea.wizard.domain.tasks.DWStringSubsTask
- pname=DOMAIN_NAME before=@DO
MAIN_NAME after=$C_domainName$ value=portalDevDomain
java.lang.ClassNotFoundException: weblogic.security.internal.InstallProxy
at com.bea.installer.utils.classloader.GenericClassLoader.reallyLoadClass(GenericClassLoader.java:352)
at com.bea.installer.utils.classloader.GenericClassLoader.loadClass(GenericClassLoader.java:165)
at com.bea.installer.utils.classloader.GenericClassLoader.loadClass(GenericClassLoader.java:140)
at com.bea.installer.tasks.SecurityTask.invokeMethod(SecurityTask.java:175)
at com.bea.installer.tasks.SecurityTask.updateFileRealm(SecurityTask.java:105)
at com.bea.installer.tasks.SecurityTask.run(SecurityTask.java:75)
at java.lang.Thread.run(Thread.java:479)
2002-12-17 22:19:47,912 ERROR [updateSecurity] com.bea.installer.tasks.SecurityTask
- Error creating ldift file for doma
in: /home/agrohs/web7.0/portalDevDomain
java.lang.ClassNotFoundException: weblogic.security.internal.InstallProxy
at com.bea.installer.utils.classloader.GenericClassLoader.reallyLoadClass(GenericClassLoader.java:352)
at com.bea.installer.utils.classloader.GenericClassLoader.loadClass(GenericClassLoader.java:165)
at com.bea.installer.utils.classloader.GenericClassLoader.loadClass(GenericClassLoader.java:140)
at com.bea.installer.tasks.SecurityTask.invokeMethod(SecurityTask.java:175)
at com.bea.installer.tasks.SecurityTask.updateLDAP(SecurityTask.java:150)
at com.bea.installer.tasks.SecurityTask.run(SecurityTask.java:78)
at java.lang.Thread.run(Thread.java:479)
2002-12-17 22:19:48,340 INFO [BEAInstallController] com.bea.installer.BEAInstallController
- Terminating.
Thanks,
Adam S. Grohs
[email protected]
Simon Nunn <[email protected]> wrote:
James,
Here is how to start in silent mode:
#!/bin/sh
# $1 is the xml file for the installer.
cd /export/home/snunn/cust/bea/weblogic700/common/lib
echo `date`
if [ "$1" = "console" ]; then
/export/home/snunn/cust/bea/jdk131_02/bin/java
-Dplatform.properties=platform.properties -Dprod.name="WebLogic Platform"
-Dprod.version=7.0 -Dprod.maintlevel=SP0 -jar dmwiz.jar -mode=console
else
/export/home/snunn/cust/bea/jdk131_02/bin/java
-Dplatform.properties=platform.properties -Dprod.name="WebLogic Platform"
-Dprod.version=7.0 -Dprod.maintlevel=SP0 -jar dmwiz.jar -mode=silent
-silent_xml=/export/home/snunn/$1 -log=/export/home/snunn/install.log
fi
Thanks,
Simon
James Weavers wrote:
Does anyone know the call to make to run the domain configuration wizardin silent
mode (directly, without using the weblogic installer)?
Thanks,
James
Maybe you are looking for
-
Query working in sql but not in forms
hi this is my query insert into sa_prod_temp select sa_idno,sa_srno_desc,count(*) qty from sa_master, select sa_code,sa_idno,sa_prod_date,sa_srno,sa_srno1 from select sa_code,sa_idno,sa_prod_date,sa_srno,sa_srno1 from bom_sa_
-
How can a table cell span more than one page?
I need to configure a table of text that permits a single cell containing a large quantity of text to automatically span several pages. This works easily in WORD but not (apparently) in PAGES. I have used the Inspector to check that the table is conf
-
Stops after printing first page and does print graphics, etc. on page
I am using WIN 7 64 bit, and until I got a new computer with this on it, my Photosmart 5580 worked fine. I bought the CD with the correct driver and software for WIN 7 from HP. However, when printing a web page, it leaves blank wherever a graph etc.
-
Pan/Zoom during transitions
(This is a follow-up question to: How to automate pan/zoom ? - That issue itself was solved so I did not want to reopen that thread.) Version: Adobe Premiere Elements 12 OS: Windows 7 After creating a slideshow from Organizer > Create Slide Show, the
-
Do we have driver available for Lake Shore Model 128 temperature sensor?
Do we have driver available for Lake Shore Model 128 temperature sensor? I want to make sure before we start writting our own drivers to communicate with this hardware. Thanks, Marivell Baez