Can't see the bonjour printer in the printer list but if I turn wi-fi off, I see the printer in the list briefly before it goes away.

I am trying to add a printer; after clicking "add printer," the list is blank. But if I turn off wi-fi, I see the bonjour printer for a moment (along with other printers on the network) and then (of course) the list is blank. When I turn on wi-fi, same thing - there and gone! And the list is blank. Printer works fine with USB connection. I am running 10.8.2

The dark bar is caused by the option "Show metadata below image".
Check the settings for the metadata overlays in Grid view (basic and expanded) by clicking the little "badge" icon below the Browser and selecting "Edit". Is the filename still enabled in the list? And in a high enough position to have precedence for other metadata tags, if the space does not suffice to show all selected tags?
Regards
Léonie

Similar Messages

I cannot open Adobe photoshop CS2 which I was using 10 days ago. Can I restore the system to before 10 days, so it will work again?

I cannot open Adobe photoshop CS2 which I was using 10 days ago. Can I restore the system to before 10 days, so it will work again?

The hatter wrote:
Rosetta can have a 2GB RAM "tax" to manage PowerPC code as well as how that affects performance.
I think real world performance shows both statements to be wrong; consider this:
If that were the case, how come Apple does not include that information in its Snow Leopard installation requirements, since Rosetta is an optional install?
Also, running a PowerPC app on an 2011 i7 Mac with Snow Leopard will run faster than running that PowerPC app on a PowerPC Mac.

I have recently moved all of my files to a larger external hard drive, but when I am reminder of an itunes upgrade it's still attempting to go to the old drive. How can I change the settings so it automatically goes to my new hard drive?

I have recently moved all of my files to a larger external hard drive, but when I am reminder of an itunes upgrade it's still attempting to go to the old drive. How can I change the settings so it automatically goes to my new hard drive?

lisacooney wrote:
I have recently moved all of my files to a larger external hard drive
How did you move these files?

I am using a bluetooth LG HBS700 headset. Since upgrading my Iphone 4 to IOS 6 I can't have the Iphone more than 1 foot away from the headset without loosing connectivity.

I am using a bluetooth LG HBS700 headset. Since upgrading my Iphone 4 to IOS 6 I can't have the Iphone more than 1 foot away from the headset without loosing connectivity.

You are a genius! Thank you so much; my LG HBS700 now works with my iPhone 5. It is so wonderful that there is this facility for people to help each other. And it is so agrivating that there are these mysterious, unexplained, magic tricks necessary to make my phone work. Do you happen to know how the button combination resolved the Bluetooth issue? What was the Bluetooth problem and how did this fix it. Again thank you for passing this on.

Can we simulate the accounting document before releasing in SD

Hi Gurus,
Can we see the document in simulation view before releasing it to accounting, Is there any other way out? please help me...
Regards,
Divyesh

Hi
It is not possible in standard transaction. However, in VF02, you can view the respective G/L in Condition analysis.
Regards
Sanil Bhandari

How can i find the file size before downloading

I am trying to decide if I want to download a tv show [Doctor Who] in standard definition or high definition. How can I see the file size before I purchase the show from iTunes?

1. That's only getting the file size of the Preview.
2. Click on a photo to select it. Then click on the info button. You can get the dimensions and the file size in the top of the pane
Note that the final size of any image will depend on the export settings you choose.

How can I see which purchased items are not transferred before making an update?

When I try to update I get the:
"There are purchased items on the iPad “Yours iPad” that have not been transferred to your iTunes library. You should transfer these items to your iTunes library before updating this iPad. Are you sure you want to continue?"
I have done a back-up and have in iPhotos transferred all non-importated images, so I just don't know what isn't there and what I will loss.
How can I see what it is that I am missing?
Can it have anything to do with that my boyfriend have downloaded some apps using his own apple account, and that these might therefore not have been back-uped?

If the drop-down menus aren't showing at the top of the iTunes screen then control-B on a PC should get them to show
e.g. (screenshot from a Mac)

How can I make the red unread messages bubble go away? I have no unread messages and I can't stand seeing the red bubble.

I am on the latest 10.10.1 Yosemite, but this problem has happened to me on previous operating systems. On my dock I have a red bubble that says I have unread messages waiting. When I go to messages, I have no unread items. I even went as far and deleted every single conversation. The bubble went away but returned quickly.
I cannot stand to look at the red bubble. I hate ever having red bubbles on anything because I am type A and it drives me insane. Please help. I find it very distracting.

You can simply turn it off.
>Sys Prefernces>Notifications<Messages> turn off badge icon

Can no longer discover Bonjour printer after logic board replacement

Since the logic board in my MacBook Pro was replaced, I can no longer "see" or print to an HP Laserjet 1200 printer connected to the USB port of my AirPort Extreme (ie, using Bonjour). The printer is not listed when I attempt to add a printer via the Print & Fax dialog. A Windows Vista laptop using the same network can print OK to this printer wirelessly, and I can print OK to the printer if I disconnect it from the AirPort Extreme and connect it directly to the USB port of my MacBook Pro. However, I can no longer print to this printer via a wireless connection. My internet connectivity is fine.

Took my MacBook Pro and AirPort Extreme to the Mac shop this morning. Technician was able to connect a USB printer to my AirPort Extreme and print to it from my MacBook Pro just fine. He suggested I do the following at home:
(a) Use a new cable to connect my AirPort Extreme to my USB printer
(b) Remove battery from MacBook Pro, put it back, then hold down power button for 6 seconds.
(c) Restart MacBook Pro while holding down Command + Option + P + R until I hear the chimes.
Tried all of the above steps at once, and my problem is now solved.

Can't find any Bonjour printer in XP

On my iMAC, I installed a Canon MP750 printer, which works fine for my iMAC.
I shared the printer on the iMAC via system preferences.
I installed Bonjour 1.4 on the 2 XP machines in the network.
In the bonjour wizzardhowever, I can't find any printers.....
The command dns-sd -B ipp.tcp results om my IMAC in:
Timestamp A/R Flags if Domain Service Type Instance Name
17:07:08.184 Add 2 4 local. ipp.tcp. Canon MP750 @ iMac
On the XP-machines I get no result at all. So for some reason the printer isn't visible for the bonjour wizzard on the 2 XP-pc's.
I disabled the firewall on the XP-machines.
I spend many hours reading tips etc, in trying to get this to work, but without any result yet.
I hope someone can help me to solve this, so I can print from the XP (SP2) pc's to this printer.
Thanks !

I had the exact same problem. Printing was fine via Bonjour in Parallels, but didn't work anymore after switching to Fusion. I solved it, though, by following the instructions from the vmware education site:
http://mylearn.vmware.com/mgrReg/plan.cfm?plan=3193&ui=www
Disable your pop-up blocker, then click on the "VMware Fusion 1.0 Printers" tutorial. If you are using Bonjour, you can skip down to step 9 in the presentation.
For me the crucial step was releasing and renewing the IP address that my VM uses, but there are a few steps, so you should watch the tutorial to make sure you are on the right track.
Hope that Helps

The sound on my iPhone 4S isn't working. When headphones are plugged in you can listen to music an watch videos but when you take the headphones out the option to adjust volume goes away and you can't hear music or videos. Any idea how to fix this?

Today I tried listening to music on my iPhone 4S, only to find that my volume adjuster had disappeared. And just to clarify, when I say that it disappeared, I mean that when I press the volume buttons on my phone, I see the speaker icon but the gauge bar is gone. I can't hear music or watch videos

Hi thecrane1137,
If you are having issues with the sound on your iPhone 4S, you may find the following article helpful:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Cheers,
- Brenden

I am trying to download the update to Photo Effects (Lite) v 3.0.0, for several weeks now without success. I press the update button and it goes away, then comes back again without any change. Can someone help please?

The update to Photo Effects (Lite) v 3.0.0 won't work. I've tried for several weeks without any result. I press the download button and it disappears, then reappears again. Can any one help, please?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ appstore.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

HT1310 Even when holding down the option key during the restart, I can't get the flashing file icon to go away

I have tried numerous times to restart my macbook pro to get to the startup manager. And even when holding down the option key, it will just take me back to the flashing file with a question mark in it. If anyone can help, I'd sincerely appreciate it.

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

How can i invoke the set method before value change listener?

Hi,
My code is like this:
<af:selectManyCheckbox value="#{bean.statusList}"
                                 binding="#{bean.statusCheckBox}"
                                 label=" " autoSumit="true"
                                 valueChangeListener="#{bean.changeStatusList}"
                                 id="dc_smc1" layout="vertical"">
            <f:selectItems value="#{bean.statusBuckets}"
                           id="statusBuckets"/>
          </af:selectManyCheckbox>
public void changeStatusList(ValueChangeEvent valueChangeEvent)
//in this method, i want to set the statusList by myself, this is not the same with the ui.
public void setStatusList(List<String> statusList)
        this.statusList = statusList;
    public List<String> getStatusList()
        return statusList;
As i set the autoSumit="true", then no matter what i set the statusList in the method changeStatusList, it will be reset the value after invoke the method setStatusList, Therefore, it will always change the checkbox status through ui operation, i cannot change it through code.
Pl help me!
Thanks,
Emma

Emma, which jdev version do you use?
As you have set the value property to the list you try to change in the valueChangeListener method this is expected behavior. If the list is bound to the af:selectManyCheckbox values you can't change it with a set method.
It would help if you tell us what you are trying to do in a broader scope.
Timo

My IPad will not turn on, despite charging all night and all day. The Apple pops up then goes away. What is wrong and how can I fix it?

My IPad will not turn on despite charging all night and all day. The Apple pops on but then shuts off again. It does this over and over. How can I fix this and get it up and running again?

Hey bellabeanbag,
Thanks for the question. The following resource outlines troubleshooting steps if your iPad is not responding:
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
If iPad won't turn on, or the display stops responding
Follow these steps, testing after each:
1. Turn the iPad off and turn it on again. Press and hold the Sleep/Wake button on top of iPad for a few seconds, until a red slider appears. Then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
2. Reset iPad. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
If iPad still won't respond after you restore it
Follow these steps, testing after each:
1. If you receive an alert in iTunes while restoring your iPad, refer to this article for instructions on how to resolve common issues with updating and restoring.
2. If you cannot restore your iPad in iTunes, or if iTunes does not recognize the device, refer to this article for instructions on restoring using recovery mode.
Thanks,
Matt M.

Can't see the bonjour printer in the printer list but if I turn wi-fi off, I see the printer in the list briefly before it goes away.

Similar Messages

Maybe you are looking for