Can't set a menu loop point for my buttons to come in

because my menu loop background video has text that flies in, i need my menu buttons that correspond to that text to come in on a delay. reading my dvdsp3 book, it seems i would need to set a loop point in the menu to trick it into doing this, however i cannot set a loop point on my menu - that option is greyed out and i cannot toggle it.
the guide i have says looping isn't possible if i add drop zones or text, but i have done neither within dvdsp3.
any help appreciated
thanks

ok i think i know what happened
i was using moving video as an asset for my buttons
once i changed that i could set a loop.
i guess i will edit my moving video into small "buttons" in FCP and then create the real selection buttons in DVDSP3.

Similar Messages

  • Setting motion menu loop point to 1 second or under causes Encore CS3 to crash

    Has anyone else had this problem?  I created a motion menu that I want to loop to a point just 24 frames after the beginning (the motion background fades in over 24 frames), but every time I try it causes Encore to crash when I go to preview the DVD and get to the loop point.

    No.
    VOB files (or Video OBjects) are the multiplexes for the timelines, and also (in the VTS_xx_0.VOB) the menu files themselves.
    IFO (or InFOrmation files) tell the player what should be there.
    Cells are the smallest part a menu or a timeline can be broken down into, and they need to be at least 1 second long.
    (If you could see "under the hood" and have multiple cells in a motion menu, and a return call is made (after the movie has played) to cell 2 ignoring cell 1 (which could be, EG, a copyright warning or whatever) you might see:
    CallSS VMGM (menu ROOT, rsm_cell 2)
    which would tell the player to return to the Root menu at the second cell, bypassing the first cell completely.

  • How can i set up multiple user accounts for my new ipad mini?

    How can i set up multiple user accounts for my new ipad mini?

    The iPad mini is basically a one user device. There are no Accounts. You can set up restrictions so that only you can do certain things.

  • Can I set up storage in icloud for the entire family?

    Can  I set up storage in iCloud for the entire family under 1 account?

    See:Family Sharing and also the site http://www.apple.com/icloud/family-sharing and see if that helps.

  • I have an iPhone and iPad on the same account.  I gave my iPad to my daughter.  Can I set up a new account for my iPhone only so I can back up photos, etc, in privacy?

    I have an iPhone and iPad on the same account.  I gave my iPad to my daughter.  Can I set up a new account for my iPhone only so I can back up photos, etc, in privacy?

    If you set up a new account on your iPhone you won't have access to all the data associated with the prior Apple ID.

  • How can i set a global error page for all error cod

    how can i set a global error page for all error code?
    i don't want to leave a long list in the web.xml file.could any one help me?
    thanks

    If u have a common Error JSP named as ErrorPage.jsp
    You need to have the following piece of code in the JSP as :
    <%@ page isErrorPage ="true"%>
    This makes it as the Common Error Page for the Application. Now all you need to do is from other JSP's throw the Exception to teh container. The container will redirect to this Page and process accordingly.
    Thanks and regards,
    Pazhanikanthan. P

  • HT201269 How can I set up same back up for all my apple devices

    How can I set up same back up for all my apple devices
    I use online tools all from apple devices 2 iPhone 5g &amp; 5s &amp; iPad mini
    I want same back up for all devices
    Specially I use appointments app
    I don't want to loose any appointment
    So can I use same backup for I devices
    Please help !,,,,,

    You can also just use the same restore backup for all your  devices you will get the same notifications BUT you have to click on Sync over wifi so it can work if not they will only work when you sync them when you sync on computer

  • Can I set up a default time for iCal events?

    Can I set up a default time for iCal events?

    That's actually how Guest Access feature works. You can share internet to your guest/visitors without giving them access to your local network. You may configure the Guest Access settings on the router using Linksys Smart Wifi through the local access interface; check this site for the instructions, http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=b509a1805dd6416ebb0e35a7e5a58937_Configuring_Guest...
    Added Info:
    Guest Network Frequently Asked Questions
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=f35bd58fda4148929ac482f3c7968e04_Guest_Network_Fre...

  • Can I set up a spam filter for my iPad like I have on my Mac?

    Can I set up a spam filter for my iPad like I have on my Mac?

    The Mac OS X Mail application has a "Junk" function that works locally, on the Mac, and just puts emails from previously designated "junk" addresses into a separete folder, so you don't have to wade thru all that spam in your Inbox. It's a very elegant and simple, local solution, that I dearly miss on iOS.
    I did submit a request for it at Apple Feedback page.
    http://www.apple.com/feedback/

  • Menu Loop Point 1-second skip

    I'm hoping somebody can help me...
    I've created a menu that has a video clip background, and set a loop point about 4 seconds in (after everything flies in, and the image remains static).
    The problem is that from the "At End:" dropdown list, "Loop" is selected, but in the box next to it, the duration (number of seconds) input field is not available to me -- I can't change it. So it's set on "1 sec"... but that leaves a terrible pause at the end of the clip before it goes back to the loop point, and I'm trying to give it a seamless loop (which seems like it should be the logical default).
    What am I doing wrong?? I've searched the manual and this forum, and can't find an answer. Please help ASAP... thanks!
    OZ

    It's a great suggestion, Hal. Thanks. But are you really saying that that skip is unavoidable? What's the point in being able to "loop" something, if the loop can't appear seamless?
    I'm not doubting that you know what you're talking about, I'm just surprised if such a fundemental problem hasn't been resolved by the manufacturers. Or am I really that much more pedantic than everyone else out there? (From what I've seen on this forum, I'd find that hard to believe!)
    Thanks for the great suggestion, anyway. (I've done something similar, where the music fades out at the end of a 2-minute menu, and when it loops, you can very clearly see the stutter, but it almost looks intentional. Not nearly as efficient (or effective) as the looping 20-second menu I was originally planning, but if that's the technology's limitations, well, whaddya do?)
    OZ

  • How can I make a while loop wait for input boolean?

    Hi.
    I'm trying to control a robotic arm with labview for my undergrad dissertation, and I have a decent polar coordinate control panel made, but there is one problem; it checks for changes in the coordinates every five seconds, while I want it to only check on the touch of a button (ie, go!, I've changed your coordinates!). The changes are calculated with a while loop comparing the last value of theta, x and z in a while loop with the current one. I can't find a way of putting that into a case structure. If there is a way of making the while loop progress at the push of a button, I think it would work. The VI's attached below.
    Thanks in advance for any help.
    Cathal Scanlon
    ps, sorry about the mess, I'm going to reorganise the while loop into 2 if I can get the control button working.
    Message Edited by CatScan on 02-08-2007 02:45 PM
    Attachments:
    Polar coord assignment1.vi ‏142 KB

    Have you tried using an event structure? To use one, right click on the structure to add an event. Set the event as whatever button you wish to monitor and set the event to "Value Change". If you put this inside a while loop any time the button is pressed, the event structure will run the contents inside the loop. There are a number of options to have the event structure activate.
    *** Warning! I'm probably the last guy you want answering your labVIEW questions, but I figured I might be able to help.

  • How can I set up breakpoints in eclipse for jsp?

    I saw somebody can set up breakpoints in eclipse for jsp.
    But I can not do that on my eclipse.
    What's the difference?
    Thanks.

    I don't think this had a keyboard shortcut even before (checked in CS6). There's an alternative though.
    1. Create a JSFL file with following code and save it in the commands folder as 'Remove Tween'.
         fl.getDocumentDOM().getTimeline().setFrameProperty('tweenType', 'none');
    2. Now goto Edit Menu > Keyboard Shortcuts..
    3. Search for 'Remove Tween' and assign a keyboard shortcut to it.
    Now everytime you press the assigned key - jsfl script is executed which essentially removes the tween from selected frame. (works for Classic and Shape tween but not Motion Tweens)

  • Iphone5 visit to Apple Genius Bar after phone would not connect to network.  Now phone is stuck in network set-up menu.  Suggestions for next steps?

    I am experiencing the never-ending searching on my iphone5.  Looking for solution and wanted to share some advice.
    I traveled out of the cellular network on 5/24 and turned off my phone.  The phone was turned back on 5/25 when I returned to an area where the phone previously connected to the network.  When the phone began searching for the network I performed the recommended trouble shooting steps, power on/off, reset network.  Once home I took it to the Spring store then to the Apple store.  No connection success.  Although the phone could connect via wi-fi and everything else worked fine the phone would not connect to the cellular network leaving the phone and internet service unavailable. 
    I asked  the Apple Genius Bar if their efforts would still allow me to update my phone via the backup information on the icloud.  The answer was yes.  However after all their efforts my phone was returned locked in the set up menu and is continues to search for a network.  I can no longer access a wi-fi connection or other apps on the phone following the factory reset and connecting the phone to the cellular service that work on 5/24.  Any tips are welcome since my phone is currently a paperweight.  Thank you.
    DO NOT ATTEMPT A FACTORY RESET or attempt removing/adding your device to existing cellular service unless your phone is under warranty or you are prepared to purchase a new phone.

    Sounds like a data issue on the iPhone. What does the carrier say? Sometimes hardware issues can cause the device to show 'searching' continuously.
    Basically, if you restore in iTunes, and the service is not activating after calling Sprint, you may be looking at a hardware replacement of the device.

  • My wife and I have been using the same iTunes account, but would like to have separate apps on our phones.  How can I set up a separate account for her?

    My wife and I have been using the same iTunes account for both our iPhones, but she wants separate apps from mine.  How can I set up a second account in her name, delete the apps on her phone and start from scratch with just the apps she wants on her phone?

    If you have the old phone, connect it to iTunes, right click on the device, and choose transfer purchases.  If you no longer have the old phone, I don't believe there is a way to recover them, as they were on your original device.

  • Can I set a default Playback preference for multiple users on same PC?

    I am setting up an editing suite for our University which has a "per machine" Creative Cloud licence. It is a PC installation. This machine will be used by a class of students who will log in with their own credentials. I need to set the preferences for Premiere (video output, workspace layout, default drives etc) so that it will be the same for all users logging in since we want a consistent setup for teaching purposes and dont want to have to help each student set up so that it shows correctly on the monitors. Is there a way of saving this setting as the default for every user?  In particular, as we have dual monitors, we want to save the preferences - Playback to always appear on the second monitor. This is really important for us - I need an answer before building more suites.
    (Adobe won't let me ask them directly, so I have to wait for someone to provide an anwser on the forums... not great customer support in my book)

    Firstly...is  this editing suite for the purpose of teaching editing or something else?
    Next ...what is your experience with PPRo?
    You can set up the machine(s) initially exactly how you want them  in regards to hardware and screen layouts etc.  Thats easy and can be called..'University of Waikato Default Edit Workspace' for example. That is  only part of it though.
    You can set up and share a common Key Board Short cut Preference File.  Same as Export Presets.
    There is no way you can "Default" all the USERS stuff for individual unique projects  though without creating a massive potential for disaster and confusion.
    Each will need to have access to many separate drive locations for their media (audio, graphics, footage) and the knowledge to create, access and locate it.
    THey will each need a separate Location for their Projects as well as their media.
    If they are editing students...they should be taught how to set up everything for themselves so they have an understanding of the fundamentals and basic s of NLEs

Maybe you are looking for