Can't set UIView's frame origin?

Hi, I'm stumped by something that didn't use to give me a compile error, and now for some reason I get "invalid lvalue in assignment", which should mean the lvalue is read-only. Surprising:
theView.frame.origin = CGPointMake(10,10);
It doesn't make any sense, and the docs specifically state you can change the origin of a frame. Do I need to give theView some other attribute that allows it to be moved?
Thanks.

Fixed the problem: I had to create a new CGRect from the existing frame, change the CGRect's origin value and then set the frame to it.

Similar Messages

Can I set a static frame (jpg or png) image as a poster image when embedding flash video into a dreamweaver page?

hello everybody - my subject line pretty much says it all...
i'm looking to have my users see a single static frame (a
poster image) that they can then click on to start playing a video.
how do i set this in either flash or dreamweaver?
anybody have any info?
much appreciated!

Will the video appear in place of the image clicked on? Or
will it be in a
separate window?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"mitrzne" <[email protected]> wrote in
message
news:fvangc$9rd$[email protected]..
> hello everybody - my subject line pretty much says it
all...
>
> i'm looking to have my users see a single static frame
(a poster image)
> that
> they can then click on to start playing a video. how do
i set this in
> either
> flash or dreamweaver?
>
> anybody have any info?
>
> much appreciated!
>

Where can i set mij laptop to original software en settings?

Ik heb een gebruikte hp pavilon laptop gekocht, maar er staat zo veel troep op dat ik deze wil terug zetten naar de fabrieks instellingen en fabrieks software. Systeem herstel of systeem recovery blijken niet in te schakelen zijn, hoe kan ik de zaak resetten naar originele fabrieks instellingen.

Click here and find the article for the OS on those disks.
(53158)

Can I set camera registers in version 1.1 of the IMAQ 1394 driver to values outside of the DCAM 1.3 specs?

I have an imaging system that includes a Pt Grey Dragonfly camera. I know that using the manufactures SDK, I can set different camera parameters outside of the DCAM specs by setting camera registers. If I am using version 1.1 of the IMAQ 1394 driver can I set, say the frame rate to a value outside the DCAM specs?

http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=5065000000080000009B580000&ECategory=Vision

I upgraded to an iPad2 and recently pulled out my old iPad 1to re-gift to a family member. I can't remember the password I originally set up - is there a way to get beyond this?

I upgraded to an iPad2 and recently pulled out my old iPad 1 to re-gift to a family member. I can't remember the password I originally set up - is there a way to get beyond this? Each time I try a different password (trying any that I thought I might have originally used) it times out the tablet for up to an hour before I can try again. Help?

You can restore the device. That is what you have to do if you forget the passcode. You don't have to worry about syncing to your own computer either since you don't want to restore your data - you want to wipe it clean. Read these articles for more instructions
iPad disabled -Wrong Passcode
http://support.apple.com/kb/ht1212
Updating or Restoring
http://support.apple.com/kb/HT1414
Sometimes you may not be able to bypass the passcode at all when you try to restore. You may need to restore by putting the iPad into recovery mode. I have heard from some users that they did not have to do this when they restore after forgetting the passcode - but just in case you need the information, this will help you with that procedure.
Unable to Update or Restore
http://support.apple.com/kb/ht1808

How can I print a full frame photo from iPhoto 11? Even though I click on scale to fit paper size, it crops both ends of the photo in landscape set up. I have an Epson R1800 with the latest drivers.

How can I print a full frame photo from iPhoto 11? Even though I click on scale to fit paper size, it crops both ends of the photo in landscape set up. I have an Epson R1800 with the latest drivers. (I'm also 3 days new to iMac and iPhoto 11 from an eMac and iPhoto 6.)

" Hello Jeff. Here at Oki Data, we do not support programming. I would recommend contacting Adobe for further assistance. You can also browse their website at http://www.adobe.com/products/postscript/.

Can't set Poster Frame for Movies on site

Hi - Any insight into this problem is much appreciated - I've built a simple site, a few pages have 2 or 3 compressed MPEG-4 movie files on the page (they are roughly 30MB each clip). I built the clips in FCP then exported them using Compressor and saved them as MPEG-4 files. I then dragged the files onto blank pages and built the site that way. I have set the Poster Frames for these clips in iWeb08, but after I publish the site the Poster Frames only save on a few files, most do not. Also, some of the clips stop playing mid-way through. Any simple fixes for this/these problem(s)? Thanks.

"This whole thing stems from me being 41 and still bowing down to my Mother's every wish and guilt trip.
Sorry to tell you so late in your life that you only have one job when it comes to moms and grand-moms. Give them what they want!
Part of your "monicker" best describes the issue.
You can edit your published pages using hundreds of tools but the are best edited with a plain text editing app like BBEdit (any plain text editor works).
You can use Safari to view your page and even "save" the source code (Command-Option-U) and then "save as". Edit this new page to make your changes and drag it back into the appropriate Web older of your iDisk (replacing the older version).
I did it to one of my pages to add a sound file to one of my slideshow pages:
http://web.mac.com/kkirkster/iWeb/Maya/Maya_files/slideshow.html
just because others said it couldn't be done.
Darn. Now you have another mother, or worse, an in-law. Sorry.

Can't set a still to 1-frame duration

Hi,
I cannot seem to set a still image to 1- or 2-frame duration. I click on "Clip Properties", and enter "0:01" or "0:02" and it just seems to jump to 4 frames (0:04). How can I set still clips (images) to last just one or two frames?
Cheers

AppleMan1958 wrote:
Esteemed forum member Jon Walker has created a video tutorial on this topic. [Click here to see it|http://web.me.com/jrwalker4/QuickNotes/iMovie08-09/Entries/2008/4/25_Tutorial024.html]
+breathtaking, awesome, groundbraking!+
it works!
thanks for sharing, AppleMan, I did miss this on Jon's excellent website..

Can you set up a key frame on a movie published through iPhoto on .Mac?

Does anybody know if you can set up a key frame on a movie published through iPhoto on .Mac? I mean the thumbnail for the movie...

lnbs:
Welcome to the Apple Discussions. Not in iPhoto. I don't know if you can import the movie into iMovie and set a key frame that way. But that would include some additional encoding to get it out of iMovie and might degrade the quality.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Can clone be set to sample the original targeted area with every click (regardless of location)?

Can the clone be set to sample the original targeted area over and over again regardless of x/y coordinates? it currently pins the original area to the result- it won't let me apply the targeted area in various locations (unless I target the specific area after every click). I am used to GIMP, where this is default... Thanks

Good day!
Do you mean »Aligned Sample« (in the Options Bar)?
http://helpx.adobe.com/photoshop/using/retouching-repairing-images.html
Regards,
Pfaffenbichler

Hi please help me , how can i set my ringing tone on my iPhone from my playlist. I wanna set some normal music from my floder not some ringing tones from iPhone origin . Please help me . Thank you :)

Hi please help me , how can i set my ringing tone on my iPhone from my playlist. I wanna set some normal music from my floder not some ringing tones from iPhone origin . Please help me . Thank you

You need to make your own ringtones in iTunes then sync them to your phone. Follow the directions here:
http://osxdaily.com/2010/09/04/make-free-iphone-ringtones-in-itunes-10/

Can I set up my new iPad as new device with my original Apple id then transfer which apps etc I want later from my cloud, thank you

Can I set up my new iPad as new device with my original Apple id then transfer which apps etc I want later from my cloud, thank you

You can download the apps again by opening App Store app on the iPad and tap Purchased at the bottom. That will display all apps that you have previously purchased on that Apple ID and you can download any of them by using the icon to the right of each (icon of a cloud with a down arrow).

I undocked a panel while working on a project how can I get back to the original setting?

I was trying different settings and can't get back to the original ones

Window>Workspace>Reset X
Where X is the name of the workspace you've been working in.

Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

Hi
I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
Anyone who can help? Thanks..
Br. Bo

Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
Or try the methods apple recommends..
OS X Yosemite: Set permissions for items on your Mac
It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

I recently tried to burn some photos to a disc. It did not work, but then I ended up with a .fpbf folder on my desktop. Can't trash it, and when trying to burn again, I get this "... can't be burned because the original items can't be found". Help???

I recently tried to burn some photos on a CD. For some reason, It did not work. Now I have a .fpbf folder on my desktop. I can't seem to get rid of it. I tried dragging it to the trash, but then I get a box asking my to type my password it, so Finder can make the changes. Doing so, does nothing at all. And when I try to burn another CD from the same .fpbf file, I get a the following message: "There are 35 items that can’t be burned because the original items can’t be found. Skip the items and continue burning?". When I skip and continue burning, nothing shows up on the CD. In the meantime, the .fpbf folder is still in my desktop. I tried changing the aliases on each pic, but it still doesn't work. Any ideas of how I can remove this folder from my desktop?
Thank you.

Beavis2084,
Thank you for your detailed explanation but something is seriously wrong with my computer. Although the method you have described is very similar to the one I tried in step 2 from my second post, I have since "done things" which may have complicated matters—or suggests that my computer has a more serious problem.
Here's what I did:
1). Installed Onyx and discovered that I had a .plist file (com.apple.iphotomosaic.plist) that was causing a Syntax error: "Conversion of data failed. The file is not UTF-8, or in the encoding specified in XML header, if XML." After doing some research online, I was given the understanding that downloading the iLife update 9.0.3 (I installed the more recent version, 9.0.4) would solve this problem because it would also fix some system issues. So, I downloaded it...and when it didn't solve the problem, I decided to just deleted that .plist file.
2). I read your knew post and decided to follow your directions, even though I realized they were basically the same steps I followed in the 2nd method I mentioned earlier. I say "basically" because, for some reason, after inserting a blank disc, my computer does not open the disc in the Finder. Instead, it places the blank disc's image on the Desktop, even though the Finder's Preferences and the System's Preferences are set to have it open in the Finder—nothing should be on my Desktop! (Note: When transferring the items (all folders) I want to burn to the blank disc, I did not use the Option-Click-Drag method as before, I used the Click-Drag method, which created the curved arrow in the lower left corner of each item.)
Now, for the result of "method 2," the method we basically have in common, the computer goes through the burn stage but, in the verify stage, tells me that it is unable to verify the disk, suggests that my DVD may be unreliable and that I should try another disc, and then tells me about some "fork" (?) error (-43).
I don't know what to do anymore...

Can't set UIView's frame origin?

Similar Messages

Maybe you are looking for