Can't start Mavericks

Maybe my question title is a little misleading, but I've been trying to search for a solution all over the web, so I don't really know how to put it.
I just updated my mac from lion OS to Mavericks, a lot of things happened while downloading, like a stalled download but once I restarted it, mavericks seemed to be installed as my computer started in mavericks
But now every time I restart it when my safari seemed to hang (and other annoying things seem to happen) , it takes awhile to reach the log in page and after I log in, it stays at the white/grey empty page for a LONG time. I've waited for over an hour but it won't get to the home page.
I've tried repairing the disk at Disk Utility many times, but the same thing still happens. I downloaded Mavericks without backing up (stupid I know) and my macintosh HD drive is full, so I'm afraid if i try to reinstall lion or mavericks I might lose my stuff.
I can't even get to the home page to finally back it up either.
Really frustrating D:
I'm a newbie so if anyone could possibly know what to do, please help me?

Hello charisgrace,
I would be concerned too if my MacBook Pro was booting just to the gray screen with the Apple logo on it. I recommend following the steps in the article below for the issue you are experiencing:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

Can not start Mavericks because of Time Mashine Backups on the Drive

I want to update OS Lion with Mavericks. But if I try to start it i got the answer that i can not use my drive for that, because it was used for Time Mashine backups before. I never wanted to use my drive for those backups. I got an second drive for them. How do i find this backups and put them in the Basked so i can start Mavericks

If you have a good time Machine Backup of your drive on which you want to upgrade to Mavericks, one option is erase the drive and install a clean installation of Mavericks. This will erase the designated drive and overwrite it, so please ensure you have a good backup or two. Once you have a clean installation, you can restore from the latest TM backup of your drive, what you need.
Your Mac internal drive is usually never used for TM backups. What type of Mac year/model do you have? Do you use an external drive for TM backups? During the installation, please ensure you are pointing to the correct drive.

How can I start an app on OSX Mavericks without switching to it?

What's up to all my Appleheads!
I usually do my research (extensively if I'm particularly annoyed) regarding any of my Apple questions, but I can't seem to find an answer to the following:
Let's say I'm working in a full screen app (e.g. - Safari) window/space and I bring up spotlight/dock/launchpad to initiate/open/start an app, how can I prevent Mavericks from automatically "pulling" me to the designated window where the app is loading? I would like to be able to continue working on whatever it is I'm working on while at the same time have my app of choice start up in the "background" without being brought to it while it's still starting up. I know I'm not the only person that finds this behavior annoying, as I've seen it phrased a number of ways, but this question in particular hasn't been addressed (that I can find).
A little info:
Early 2011 13" MBP
8gb RAM
500gb HDD
OSX 10.9.4
P.S. I've already tried the 'When switching to an application, switch to a Space with open windows for that application' within Mission Control settings. This does not yield the result I am searching for.

Welcome to the Apple Support Communities
On the iPhone, open Settings > iTunes and App Store, and turn off Apps

Can't start any program after upgrading to Mavericks from Mountain Lion.

After upgrading my Macbook Pro from Mountain Lion to Mavericks, I can't start any program from the dock or finder. The screen flashes briefly gray, then returns to the desktop. I repairded permissions from the recovery partition.

No need to repair permissions from the recovery partition. You can do that using the Disk Utility app located in HD > Applications > Utilities.
As for the issues with your Mac. Check to see if the startup disk needs reparing. (not the same as permissions)
The startup disk may need repairing ...
Launch Disk Utility located in HD > Applications > Utillities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If DU reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to acces the built in utilities in OS X Recovery
Make sure to back up all important files first before using OS X Recovery.

After installing Mavericks my iMac opens with the "rolling surf" desktop. I can then start my preferred desktop from a saved 'photo but when I retsart the iMAc it reverts to "rolling surf". How can I get it to remeber to open with MY choice rather than Ap

After installing Mavericks my iMac opens with the "rolling surf" desktop. I can then start my preferred desktop from a saved 'photo but when I retsart the iMac it reverts to "rolling surf". How can I get it to remember to open with MY choice rather than Apple's?

I did a little research on this, as I found some strange things with the .plist files.
It appears that Apple has changed the way that the plist files are handled, and there is now an extra step in the trashing-the-.plist-file fix:
1. hold down the option key
2. in the Go menu in the Finder, scroll down to Libary
3. in Library, find Preferences
4. in Preferences, find com.apple.desktop.plist and drag it to the trash.
5. go to Applications > Utilities > Activity Monitor
     1. Sort by Process Name and look for two processes named cfprefsd.
     2. Make sure you select the one that has your user account, not "root", listed as the User.
     3. Click the X up at the top left to kill that process
5. restart
6. this will generate a new .plist file, so you will have to reenter your preferences.
Sorry for the confusion. Could you try this and let us know-

After reading and resetting everything with Keyboard I still get blank white screen. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans at full speed.

After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
EtreCheck version: 1.9.15 (52)
Report generated August 30, 2014 at 6:56:41 PM EDT
Hardware Information: ?
    iMac (21.5-inch, Mid 2011) (Verified)
    iMac - model: iMac12,1
    1 2.5 GHz Intel Core i5 CPU: 4 cores
    4 GB RAM
Video Information: ?
    AMD Radeon HD 6750M - VRAM: 512 MB
        iMac 1920 x 1080
System Software: ?
    OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
Disk Information: ?
    ST3120026AS disk0 : (120.03 GB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted>: 209.7 MB
        Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
    HL-DT-STDVDRW GA32N
USB Information: ?
    Apple Inc. FaceTime HD Camera (Built-in)
    CHICONY USB NetVista Full Width Keyboard
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Internal Memory Card Reader
Thunderbolt Information: ?
    Apple Inc. thunderbolt_bus
Gatekeeper: ?
    Anywhere
Kernel Extensions: ?
    [loaded]    com.nvidia.CUDA (1.1.0) Support
    [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
    [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
    CUDA: Path: /System/Library/StartupItems/CUDA
    FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Launch Daemons: ?
    [loaded]    com.adobe.fpsaud.plist Support
    [running]    com.arcsoft.eservutil.plist Support
    [running]    com.bjango.istatmenusdaemon.plist Support
    [loaded]    com.oracle.java.Helper-Tool.plist Support
    [running]    com.sophos.autoupdate.plist Support
    [running]    com.sophos.configuration.plist Support
    [running]    com.sophos.intercheck.plist Support
    [running]    com.sophos.notification.plist Support
    [running]    com.sophos.scan.plist Support
    [running]    com.sophos.sxld.plist Support
    [running]    com.sophos.webd.plist Support
Launch Agents: ?
    [running]    com.arcsoft.esinter.plist Support
    [running]    com.bjango.istatmenusagent.plist Support
    [loaded]    com.nvidia.CUDASoftwareUpdate.plist Support
    [loaded]    com.oracle.java.Java-Updater.plist Support
    [running]    com.sophos.uiserver.plist Support
User Login Items: ?
    Macs Fan Control
    Firefox
Internet Plug-ins: ?
    FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
    Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    JavaAppletPlugin: Version: Java 7 Update 67 Check version
    Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
    CUDA Preferences Support
    Fan Control Support
    Flash Player Support
    Java Support
Time Machine: ?
    Time Machine not configured!
Top Processes by CPU: ?
         1%    WindowServer
         1%    fontd
         0%    firefox
         0%    SystemUIServer
         0%    SophosWebIntelligence
Top Processes by Memory: ?
    229 MB    firefox
    156 MB    SophosScanD
    152 MB    InterCheck
    131 MB    com.apple.IconServicesAgent
    115 MB    SophosAntiVirus
Virtual Memory Information: ?
    424 MB    Free RAM
    1.53 GB    Active RAM
    1.37 GB    Inactive RAM
    699 MB    Wired RAM
    1.26 GB    Page-ins
    0 B    Page-outs

I'd start by getting rid of the following software responsible for these extensions.
Kernel Extensions: ?
    [loaded]    com.nvidia.CUDA (1.1.0) Support
    [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
    [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
    CUDA: Path: /System/Library/StartupItems/CUDA
    FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
    1. AppZapper
    2. AppDelete
    3. Automaton
    4. Hazel
    5. AppCleaner
    6. CleanApp
    7. iTrash
    8. Amnesia
    9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.
Be sure to remove your two Login Items. Finally do this:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Can not start up with internal HD after 10.9.4 update

After installing 10.9.4 update, can no longer startup from internal HD on late 2012 iMac, 2.9 ghz, 8 gb ram, 1 TB internal
Used Disk Utility to starup from external 10.9.3 drive and that works fine.
Loaded the manual 10.9.4 update onto external, and tried updating the 10.9.4 internal. No luck.
Attempting internal startup with 10.9.4 results in black screen, followed by several seconds of lit screen and spinning icon, then back to black screen.
After starting up on 10.9.3 external, 10.9.4 internal shows mounted, files appear fine, and can copy back and forth. Just can't start with that drive, and can't risk updating external 10.9.3 to 10.9.4 until I find out and fix the problem.
Thank you

This was reported by another user:
I had the same issue with my 2008 iMac and Apple support walked me through the fix yesterday...
1. Shut the computer down by holding the power button for 10 seconds
2. Restart the computer and press shift at the same time until you see the progress bar start moving
3. Once you reach the point where your screen goes dark and you see the cursor, type the first letter of the username for your computer, then hit Enter, then type your password, then hit Enter.
4. After a moment, you should see the spinning beach ball
5. Your screen should then move on to something along the lines of "Completing OSX Installation" (I can't remember the exact wording). Let it finish. After that it should go to your normal desktop and the issue should be fixed. (If your screen goes pitch black during this process, hit the space bar. I thought it wasn't working, but the screen was just sleeping).
Apparently it's an issue with an automatic update that never quite got past the login screen.
If the above doesn't help, then move on to these:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).

I can't download Mavericks from the Mac App Store

I can't download Mavericks, I don't know if the Apple's server are full but Mac App Store show me an error when I try to upgrade my MacbookPro Retina, just sometimes the download starts and It stops at 358 mg and after it give me the error.
How I can solve the problem ?

Thanks for the link, Niel. I'm kind of disappointed with Apple that they're making us buy an upgrade to her OS to get all of her Apple products to work together. It seems weird that we could have any old Windows machine and this would work great, but the fact that she has a MacBook is screwing this up.

I can't start the computer after idle state

after idle state or sleep time i can`t start any programm

Which OS is installed? You posted in the Mavericks forum but it does help to have have information in your profile.

I have a mid2009 MacBook Pro for which I have been using a USB WD HD for Time Machine. I'd like to get a wireless HD and start a new Time Machine backup for this Mac and retire the 5 year old WD drive. Can I start over?

I have a mid2009 MacBook Pro running Mavericks for which I have been using a USB WD HD for Time Machine. I'd like to get a wireless HD and start a new Time Machine backup for this Mac and retire the 5 year old WD drive. Can I start over?

no archive/ backup is perfect, HD clones can be set to make incremental additions, same as time machine however, though they are more time involved in doing so.
See the + and - of all data backup/ archives below and "spread it around".... or the "dont put your eggs all in one basket" philosophy.
Peace
Data Storage Platforms; their Drawbacks & Advantages
#1. Time Machine / Time Capsule
Drawbacks:
1. Time Machine is not bootable, if your internal drive fails, you cannot access files or boot from TM directly from the dead computer.
2. Time machine is controlled by complex software, and while you can delve into the TM backup database for specific file(s) extraction, this is not ideal or desirable.
3. Time machine can and does have the potential for many error codes in which data corruption can occur and your important backup files may not be saved correctly, at all, or even damaged. This extra link of failure in placing software between your data and its recovery is a point of risk and failure. A HD clone is not subject to these errors.
4. Time machine mirrors your internal HD, in which cases of data corruption, this corruption can immediately spread to the backup as the two are linked. TM is perpetually connected (or often) to your computer, and corruption spread to corruption, without isolation, which TM lacks (usually), migrating errors or corruption is either automatic or extremely easy to unwittingly do.
5. Time Machine does not keep endless copies of changed or deleted data, and you are often not notified when it deletes them; likewise you may accidently delete files off your computer and this accident is mirrored on TM.
6. Restoring from TM is quite time intensive.
7. TM is a backup and not a data archive, and therefore by definition a low-level security of vital/important data.
8. TM working premise is a “black box” backup of OS, APPS, settings, and vital data that nearly 100% of users never verify until an emergency hits or their computers internal SSD or HD that is corrupt or dead and this is an extremely bad working premise on vital data.
9. Given that data created and stored is growing exponentially, the fact that TM operates as a “store-it-all” backup nexus makes TM inherently incapable to easily backup massive amounts of data, nor is doing so a good idea.
10. TM working premise is a backup of a users system and active working data, and NOT massive amounts of static data, yet most users never take this into consideration, making TM a high-risk locus of data “bloat”.
11. In the case of Time Capsule, wifi data storage is a less than ideal premise given possible wireless data corruption.
12. TM like all HD-based data is subject to ferromagnetic and mechanical failure.
13. *Level-1 security of your vital data.
Advantages:
1. TM is very easy to use either in automatic mode or in 1-click backups.
2. TM is a perfect novice level simplex backup single-layer security save against internal HD failure or corruption.
3. TM can easily provide a seamless no-gap policy of active data that is often not easily capable in HD clones or HD archives (only if the user is lazy is making data saves).
#2. HD archives
Drawbacks:
1. Like all HD-based data is subject to ferromagnetic and mechanical failure.
2. Unless the user ritually copies working active data to HD external archives, then there is a time-gap of potential missing data; as such users must be proactive in archiving data that is being worked on or recently saved or created.
Advantages:
1. Fills the gap left in a week or 2-week-old HD clone, as an example.
2. Simplex no-software data storage that is isolated and autonomous from the computer (in most cases).
3. HD archives are the best idealized storage source for storing huge and multi-terabytes of data.
4. Best-idealized 1st platform redundancy for data protection.
5. *Perfect primary tier and level-2 security of your vital data.
#3. HD clones (see below for full advantages / drawbacks)
Drawbacks:
1. HD clones can be incrementally updated to hourly or daily, however this is time consuming and HD clones are, often, a week or more old, in which case data between today and the most fresh HD clone can and would be lost (however this gap is filled by use of HD archives listed above or by a TM backup).
2. Like all HD-based data is subject to ferromagnetic and mechanical failure.
Advantages:
1. HD clones are the best, quickest way to get back to 100% full operation in mere seconds.
2. Once a HD clone is created, the creation software (Carbon Copy Cloner or SuperDuper) is no longer needed whatsoever, and unlike TM, which requires complex software for its operational transference of data, a HD clone is its own bootable entity.
3. HD clones are unconnected and isolated from recent corruption.
4. HD clones allow a “portable copy” of your computer that you can likewise connect to another same Mac and have all your APPS and data at hand, which is extremely useful.
5. Rather than, as many users do, thinking of a HD clone as a “complimentary backup” to the use of TM, a HD clone is superior to TM both in ease of returning to 100% quickly, and its autonomous nature; while each has its place, TM can and does fill the gap in, say, a 2 week old clone. As an analogy, the HD clone itself is the brick wall of protection, whereas TM can be thought of as the mortar, which will fill any cracks in data on a week, 2-week, or 1-month old HD clone.
6. Best-idealized 2nd platform redundancy for data protection, and 1st level for system restore of your computers internal HD. (Time machine being 2nd level for system restore of the computer’s internal HD).
7. *Level-2 security of your vital data.
HD cloning software options:
1. SuperDuper HD cloning software APP (free)
2. Carbon Copy Cloner APP (will copy the recovery partition as well)
3. Disk utility HD bootable clone.
#4. Online archives
Drawbacks:
1. Subject to server failure or due to non-payment of your hosting account, it can be suspended.
2. Subject, due to lack of security on your part, to being attacked and hacked/erased.
Advantages:
1. In case of house fire, etc. your data is safe.
2. In travels, and propagating files to friends and likewise, a mere link by email is all that is needed and no large media needs to be sent across the net.
3. Online archives are the perfect and best-idealized 3rd platform redundancy for data protection.
4. Supremely useful in data isolation from backups and local archives in being online and offsite for long-distance security in isolation.
5. *Level-1.5 security of your vital data.
#5. DVD professional archival media
Drawbacks:
1. DVD single-layer disks are limited to 4.7Gigabytes of data.
2. DVD media are, given rough handling, prone to scratches and light-degradation if not stored correctly.
Advantages:
1. Archival DVD professional blank media is rated for in excess of 100+ years.
2. DVD is not subject to mechanical breakdown.
3. DVD archival media is not subject to ferromagnetic degradation.
4. DVD archival media correctly sleeved and stored is currently a supreme storage method of archiving vital data.
5. DVD media is once written and therefore free of data corruption if the write is correct.
6. DVD media is the perfect ideal for “freezing” and isolating old copies of data for reference in case newer generations of data become corrupted and an older copy is needed to revert to.
7. Best-idealized 4th platform redundancy for data protection.
8. *Level-3 (highest) security of your vital data.
[*Level-4 data security under development as once-written metallic plates and synthetic sapphire and likewise ultra-long-term data storage]
#6. Cloud based storage
Drawbacks:
1. Cloud storage can only be quasi-possessed.
2. No genuine true security and privacy of data.
3. Should never be considered for vital data storage or especially long-term.
4. *Level-0 security of your vital data.
Advantages:
1. Quick, easy and cheap storage location for simplex files for transfer to keep on hand and yet off the computer.
2. Easy source for small-file data sharing.

Back to my mac can't start - problem with account

Having problems with Back to my Mac in Mavericks for one of my machines. Get the message, "Back to my Mac can't start because of a problem with your account. Sign out, sign back in, and try again. If this problem persists, restart your computer.
Tried cleaning out keychains and resetting icloud password, along with signing in/out of icloud, but no success. Anyone else see this problem?

Hi MarkDeBower,
Thanks for using Apple Support Communities. This article has some steps you can try if you are unable to use Back to My Mac:
OS X: Using and troubleshooting Back to My Mac with your iCloud account
http://support.apple.com/kb/ht4907
Cheers,
- Ari

Safari crashes after update 7.1! Can`t start it anymore!

After I make the update to version 7.1 I can`t start safari anymore
In the console I can read:
04.10.14 19:56:08,374 Safari[666]: Unable to load nib file: MainMenu, exiting
Can anybody help?
Greetings Peter

You ran a defective third-party "utility" such as "CleanMyMac" or "MacCleanse" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.
The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

I have a macbook pro. I recently upgraded it to mavericks. i also had windows 8 in the other partition. but now i accidentally deleted my mac os. how can i reinstall mavericks.? pls hlp me out

I have a macbook pro. I recently upgraded it to mavericks. i also had windows 8 in the other partition. but now i accidentally deleted my mac os. how can i reinstall mavericks.? pls hlp me out

paul dave,
to reïnstall Mavericks on your 13-inch Mid 2012 MacBook Pro, you can try booting into Recovery mode by holding down ⌘R as your MacBook Pro starts up. Eventually it will show an OS X Utilities menu on the desktop; select Reïnstall OS X from that menu, and follow the instructions which it provides to reïnstall it onto its internal disk.

Error "can not start the configuration in parallel does not correct"

Hello everybody,
I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
Thanks in advance!

Check this KB
1678498 - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error

Can not start data Collection service

I have installed Fabric Manager version 3.3.(4). In the Performance Web Client I can not start the service Data Collection is in starting forever.
I also could not stop it. I rebooted the server and the status for this service is in starting.
Thanks,

Please provide more details like: Server OS, Java version, and what type of database you are using for the FM Server. Have you considered using a newer version of FM Server?

Can't start Mavericks

Similar Messages

Maybe you are looking for