Can't use cf administrator

I got ColdFusion MX Bible book and used the cd to install CF
Administrator. I have Vista and I go
Start-Programs-Macromedia-Adminstrator, Firefox is opened up and it
tries to go to
http://localhost:8500/CFIDE/administrator/index.cfm
but I get and error with this in the stack:
java.lang.NoClassDefFoundError
at javax.crypto.Cipher.getInstance([DashoPro-V1.2-120198])
at coldfusion.compiler.TemplateReader.decrypt(Unknown
Source)
at coldfusion.compiler.TemplateReader.(Unknown Source)
at
coldfusion.compiler.NeoTranslationContext.getPageReader(Unknown
Source)
at coldfusion.compiler.NeoTranslator.translateJava(Unknown
Source)
at coldfusion.compiler.NeoTranslator.translateJava(Unknown
Source)
at coldfusion.runtime.TemplateClassLoader$1.fetch(Unknown
Source)
at coldfusion.util.LruCache.get(Unknown Source)
at
coldfusion.runtime.TemplateClassLoader$TemplateCache.fetchSerial(Unknown
Source)
at coldfusion.util.AbstractCache.fetch(Unknown Source)
at coldfusion.util.SoftCache.get(Unknown Source)
at coldfusion.runtime.TemplateClassLoader.findClass(Unknown
Source)
at coldfusion.filter.PathFilter.invoke(Unknown Source)
at coldfusion.filter.ExceptionFilter.invoke(Unknown Source)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(Unknown
Source)
at coldfusion.filter.BrowserFilter.invoke(Unknown Source)
at coldfusion.filter.GlobalsFilter.invoke(Unknown Source)
at coldfusion.filter.DatasourceFilter.invoke(Unknown Source)
at coldfusion.CfmServlet.service(Unknown Source)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:241)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
at
jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:348)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:451)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:294)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
Why can't I connect to administrator?
Thanks,
Mark

Two quickies, download the evaluation copy from adobe.com. A
lack of serial number locks it into developer edition which is fine
for your purpose. It's free and might beat the problem you see
here. Note however you should download the version referenced by
your book, ie I'm still using MX 7 which was still available as of
the other week.
Second, I prefer using 127.0.0.1:8500 instead of
localhost:8500 - I know it should work, but I have lots of
variables set based on whether I'm running local or live on the
server and the IP address has proven to be more stable over the
years.

Similar Messages

Can not use repository administration tool

Hello,
I'm a newby at Oracle Designer and I have a problem create a repository for Oracle Designer.
On my computer I have installed the following software:
x Java SDK & JRE 6
x Oracle Database 10g R2
x Oracle Designer 10.
While I'm installing Oracle Designer the OUI says that it can't find Java JRE but the installation completes.
If I want to use Designer with the hr-schema it says I have to create a repository for the user hr.
If I want to open the repository administration tool nothing happens nothing. If I want to open the repository command line tool it says that it can't find ORACLE_HOME but I have set the environment variable ORACLE_HOME to the database home c:\oracle\product\10.2.0\db_1.
I presume that I have to install the complet Developer Suite. Is this correct or does anybody know the answer?
Please Help me!
Thanks to everybody.

Yes you have to install the complete Developer suite for Windows. Then you will need to install a repository on an existing database.
Here are some quick instructions on doing that:
After you install the IDS 10G in a new oracle home on the Client windows PC you will find the intall manual under:
start - programs- Oracle Developer Suite - Designer documentation - Repository instalation Guide
The following are the step I use to build a new repository
You will need to set paths and names as you desire for your local PCs and repostiory.
-- Step 1
Log on as SYS
This is so you can get the path name of your datafiles:
select file_name, tablespace_name from dba_data_files;
-- D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\TEMP_65.DBF
create tablespace constant_grow_indexes
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\constant_grow_indexes_01.dbf'
size 4000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace constant_grow_TABLES
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\constant_grow_tables_01.dbf'
size 15000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace dependency_indexes
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\dependency_indexes_01.dbf'
size 5600k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace dependency_tables
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\dependency_tables_01.dbf'
size 9000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace diagram_indexes
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\diagram_indexes_01.dbf'
size 1000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace diagram_tables
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\diagram_tables_01.dbf'
size 2000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace lob_data
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\lob_data_01.dbf'
size 1200k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace rapid_grow_indexes
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\rapid_grow_indexes_01.dbf'
size 250000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace rapid_grow_tables
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\rapid_grow_tables_01.dbf'
size 500000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace system_meta_indexes
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\system_meta_indexes_01.dbf'
size 20000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace system_meta_tables
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\system_meta_tables_01.dbf'
size 30000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace temporary_indexes
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\temporary_indexes_01.dbf'
size 5000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace temporary_tables
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\temporary_tables_01.dbf'
size 9000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace version_indexes
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\version_indexes_01.dbf'
size 9000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
create tablespace version_tables
datafile 'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\version_tables_01.dbf'
size 12000k
default storage (initial 100k next 100k minextents 1 maxextents UNLIMITED pctincrease 0);
-- Step 2
Make sure you ave plenty of space in your system tablespace
select tablespace_name, sum(bytes)/1024/1024 from dba_free_space
group by tablespace_name;
alter tablespace system add datafile
'D:\ORACLE2\PRODUCT\10.2.0\ORADATA\ORCL1022\system03.dbf' size 140m;
-- Step 3
As SYS
create user owner identified by owner default tablespace users
temporary tablespace temp;
Run this file as SYS
@ D:\Designer_Home\IDS10_1_2\repadm61\UTL\CKROROLE.SQL
GRANT EXECUTE ON DBMS_LOCK TO owner;
GRANT EXECUTE ON DBMS_PIPE TO owner;
GRANT CREATE TABLE TO owner;
GRANT CREATE VIEW TO owner;
GRANT CREATE PROCEDURE TO owner;
GRANT CREATE SYNONYM TO owner;
GRANT CREATE SEQUENCE TO owner;
GRANT SELECT ON v_$nls_parameters TO owner WITH GRANT OPTION;
GRANT SELECT on sys.V_$PARAMETER TO owner;
GRANT SELECT ON dba_rollback_segs TO owner;
GRANT SELECT ON dba_segments TO owner;
GRANT CREATE ANY SYNONYM TO owner;
GRANT DROP ANY SYNONYM TO owner;
GRANT CREATE PUBLIC SYNONYM TO owner;
GRANT DROP PUBLIC SYNONYM TO owner;
GRANT ck_oracle_repos_owner to owner;
GRANT CONNECT, RESOURCE TO owner;
GRANT dba TO owner;
(If you want Row Level Security (RLS) on)
GRANT execute on dbms_rls to owner;
-- Step 4 Adding a user
create user user65 identified by user65 default tablespace users
temporary tablespace temp;
GRANT CONNECT, RESOURCE TO user65;
GRANT CKR_OWNER TO USER65;
GRANT CREATE TABLE TO user65;
GRANT CREATE VIEW TO user65;
GRANT CREATE PROCEDURE TO user65;
GRANT CREATE SYNONYM TO user65;
GRANT CREATE SEQUENCE TO user65;
GRANT SELECT ON dba_rollback_segs TO user65;
GRANT SELECT ON dba_segments TO user65;
GRANT CKR_OWNER TO USER65;
GRANT EXECUTE ON SDD_ACC_PRIV_LIST TO USER65;
GRANT EXECUTE ON SDD_SYS_PRIV_LIST TO USER65;
GRANT SELECT ON SDD_DEPENDENCY_TYPES TO USER65;
GRANT SELECT ON I$RM_ELEMENT_TYPES TO USER65;
GRANT SELECT ON SDD_GLOBAL_NAMES TO USER65;
GRANT EXECUTE ON JR_UTIL TO USER65;
GRANT EXECUTE ON JR_SYSTEM_UTIL TO USER65;
GRANT EXECUTE ON CKMIGFUN TO USER65;
-- Step 5
The following are the recommended minimum settings.
optimizer_mode = Choose
compatible = 9.0.0 # for an Oracle9i database
compatible = 8.1.7 # for an Oracle8i database
max_enabled_roles = 30
sort_area_size = 262144
sort_area_retained_size = 65536
hash_area_size = 1048576
optimizer_index_caching = 50
optimizer_index_cost_adj = 25
shared_pool_size = 32000000
db_block_buffers # comment out on an Oracle9i database
db_block_buffers = 2000 # on an Oracle8i database
open_cursors = 3000
processes = 100
db_file_multiblock_read_count=16 # for a 4K Oracle block size
db_file_multiblock_read_count=32 # for a 2K Oracle block size
db_file_multiblock_read_count=8 # for a 8K Oracle block size
Step 5b - (Oracle 9i or 10.2 DB) Install Oracle 9i or 10.2 Import and Export Utilities
Before installing Designer Repository on an Oracle 9i or 10.2 database, you need to set up the installation workstation to use the Oracle 9i or 10.2 import and export utilities. To do so, perform the following steps at the workstation from which you will be running the repository installation:
From the Oracle 9i or 10.2 installation media, install the Oracle 9i or 10.2 import and export utilities in a dedicated Oracle home.
In the Windows Registry, locate the key named:
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_HomeName\REPOS61
where HOMEn is the home number of the home installed into for a multiple Oracle home environment, but is not present where the default Oracle home is being used.
Change the value of the EXECUTE_IMPORT and EXECUTE_EXPORT variables to point to the new Oracle home. Thus, if the new Oracle home is d:\des_9i, the settings would be:
d:\des_9i\bin\exp.exe
d:\des_9i\bin\imp.exe
-- Step 6
Log on to the Repository Admin Utility of Designer
start - programs- Oracle Developer Suite - Designer - Repository Admin Utility
Install Repository button
Make sure both check boxes are checked(one is grayed out) Next
Select the proper tablespace for the seletced box
Start the install.
Hope this helps.
Michael.

Can I use iCloud to since many users to one account for my business and have me as a administrator to oversee and change peoples calendars?

Can I use iCloud to since many users to one account for my business and have me as a administrator to oversee and change my employees calendars and contacts??

Go to System Preferences and click Sign Out, select Delete at all the prompts, then sign back in with the changed ID? (Your iCloud data will disappear from your Mac when you sign out and choose Delete, but will still be in iCloud. Provided you are signing back into the same account your data will reappear on your Mac when you sign back in.)

Can I use the same administrator password on multiple devices

Can I use the same administrator password on multiple devices? (ie) MacBook Pro and Powerbook G 4

Hello,
I use the same password on all my Macs. Provided you have set the user accounts with the same password, you will be fine.

I can't use home sharing because it says Bonjour is not enabled. So I went to administrative tools and started it. Restarted my computer and home sharing still isn't working

I can't use home sharing because it says Bonjour is not enabled. So I went to administrative tools and started it. Restarted my computer and home sharing still isn't working

I have also tried repairing Bonjour in adminstrative tools and still a no go! Frustrated!!! Looking for another idea

I bought macbook pro at cash america used and loaded with windows 7 ultimate by boot camp.My questions is it has mountain lion loaded but original ower has name with password so how can I reload so I can sign on as administrator for downloads and upgrades

I bought a 13 inch macbook pro9.2 at Cash America with windows 7 Ultimate with boot camp program.
The Mac op sytem has Mountain Lion installed but the previous ower has his name and password attached to it and can only use as guest.
My question is how do I get around this to be administrator to reload software so i can use mountain Lion,and not loose the windows op .

If you reformat the partition that contain Mountain Lion and reinstall Mountain Lion, it should not effect the Windows pratition.
Have said that I suggest you backup everything you might want to save just in case.
Allan

I can´t use my PH because adobe tell that is not actualized but the administrator say that my death line will be on september 2015... what can i do please

i can´t use my PH because adobe tell that is not actualized but the administrator say that my death line will be on september 2015... what can i do please

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

I've forgotten my administrator password and have lost the original install disc for my macbook but I do have the install disc for my imac; can I use the imac install disc to reset the administrator password?

I've forgotten my administrator password for my macbook pro and don't have the original OS X disc; I do have the OS X disc for my iMac. Can I use this to reset the password?

You have nothing to loose by trying it.
I doubt it will boot but try it anyhow.
You will need to contact Apple for replacement install disks.
Contacting Apple for support and service

HT5454 I'm in an educational environment. New student computers have ARD installed. We don't want them to use the administration features of ARD but to be clients only. How can I accomplish this?

I'm in an educational environment. New student computers have ARD installed. We don't want them to use the administration features of ARD but to be clients only. How can I accomplish this?

Unless you installed the ARD administration application on the computers yourselves, all they'll have is the client. The ARD admin app is not included with Macs; it must be purchased from the Mac App Store. If you did for some reason install the ARD admin app, just remove it.
Regards.

After Server Administration Software for 10.6.8 install on my mac- Now I can't use Disk Utility ?

I installed ServerAdministrationSoftware for 10.6.8 on my mac- NOW I can't use Disk Utility - get Dyld Error Message: Library not loaded: /System/Library/PrivateFrameworks/PlatformHardwareManagement.framework/Versions /A/PlatformHardwareManagement? Also, the only reason I installed this was for the Workgroup Monitor which kicks out the same error.
Any help would be appreciated!

FireFox can't open lots of files it isn't suposed to. DMG is opened by the Mac osx as a virtual volume file you just drag the FireFox icon to where you want it installed. Check your desktop for a FireFox volume... like a drive. Double click the DMG file if it is not there. This is how Mac works it has nothing to do with FireFox, many apps install this way!

I dont have a created card so thats mean i can't use my itunes or download apps on my ipad :( some one give me answer please

so how can i use it if i don't have created card beside i'am not the only one that have this problem too much can't use ipad because no created card so what should i do........ Do I return it to the vendor !!! :

Many thanks diesel. I cannot remember ever having an administrator password. Looks like I shall have to do a restore on my PC and not bother with the updates. Or maybe I could find my password from somewhere ? When I went into control panel I found a box with administrator and my name and it said password protected so I must have had one at some time. Any ideas on how I could find it ? Many thanks anyway. I always use a password to sign on but obviously that is not it. Eileen

TS1368 HELP!!! After upgrading to IOS 6.13 my IPAD Stucks in a plug-in screen and the Itunes. When i Try to connect to iTUNES pop-up message apear "iTunes has detected an iPad in recovery mode.. You must restore this iPad before it can be used with iTunes

I have windows 8 enterprise OS and iTunes ver. 10.5.0.142. I was upgrading my iPad to IOS 6.1.3. After finishing the upgrade my iPad Reboot and currently stucked-up in a plug-in screen and iTunes Logo. When I try to connect it to the iTunes pop-up message appear saying " iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes." In short, I push the restore button then another pop-up message appear saying " The iPad software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." I tried many ways but still no luck. I repeatedly reboot the iPad and open the iTunes still the same problem. I try also to uninstall the iTunes and installed the lower version but still the same problem, I even check the firewall if the ITunes was block or My privileges is administrator to run the iTunes or even reset my winsock but the problem still remain. PLEASE HELP! Thank you in advance!!!

Turn off your firewall and antivirus software.

Can I use Pages with more than one user?

Hi,
I recently purchased Pages and want to be able to use it with two different users (one personal, one business). Is this possible? If so, how? I have no problem using it with the user I purchased it with, but my business user does not the option for Pages in the launchpad. How can I use Pages across users?
Thank you,
Britta

Pages should be installed in the Applications folder at the top level of your hard drive to be available to all users of that Mac. By default, if you are logged in as an administrator, applications are installed in this folder. I haven't done it, but I understand that if you are not an administrator, applications are installed only in that user's applications folder.
My installation of iWork is from the retail disc from more than three years ago but I did check for an app purchased from the Mac App Store in another user account on my Mac & had no problems finding it or launching it from Launchpad. Launchpad can be very cluttered &, unless you take the time to organize it, it can be very difficult to find a particular application. I would suggest trying to launch Pages from a Finder window or with a Spotlight search. And keep the Pages icon in the Dock for easy access the next time.

Can´t use any Apple product (safari, iTunes, iCloud) on windows

Please need some help, I have 5 days I can´t use anything on my Laptop ...
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
LENOVO HuronRiver Platform
iTunes 10.6.1.7
QuickTime 7.7.1
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0038A9C40B97BCB0
Current user is an administrator.
The current local date and time is 2012-05-19 13:04:44.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
(Tipos de pantalla estándar), Tarjeta gráfica VGA estándar
Intel Corporation, Intel(R) HD Graphics 3000
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 14f3ef119a09197d6b1526a256c3b0c3
iPodService 10.6.1.7 (x64) is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {26AC8F50-B965-40AB-9899-BCDAF6B04CD1}
Description:          Microsoft Virtual WiFi Miniport Adapter #2
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name:          {F6CF4C4A-29FB-429A-9805-C1015AE13079}
Description:          Microsoft Virtual WiFi Miniport Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name:          {C1918355-9095-461D-8167-4AAE971D444B}
Description:          Intel(R) WiFi Link 1000 BGN
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name:          {1BA4E6AE-3D22-467C-94E7-8D001E50D656}
Description:          Realtek PCIe FE Family Controller
IP Address:          172.16.0.236
Subnet Mask:          255.255.0.0
Default Gateway:          172.16.0.1
DHCP Enabled:          No
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:          172.16.0.6
                    172.16.0.5
Adapter Name:          {D7CE17B8-C7C3-47FA-8823-528D1838435C}
Description:          VMware Virtual Ethernet Adapter for VMnet1
IP Address:          192.168.63.1
Subnet Mask:          255.255.255.0
Default Gateway:          0.0.0.0
DHCP Enabled:          No
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name:          {C029E97D-2B03-4BA1-93F9-7E6D84E542ED}
Description:          VMware Virtual Ethernet Adapter for VMnet8
IP Address:          192.168.218.1
Subnet Mask:          255.255.255.0
Default Gateway:          0.0.0.0
DHCP Enabled:          No
DHCP Server:
Lease Obtained:          Wed Dec 31 19:00:00 1969
Lease Expires:          Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection:          Conexión LAN
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2012-05-14 19:26:57.

Many thanks.
With those symptoms, let's start with the following document;
Apple software on Windows: May see performance issues and blank iTunes Store

How can I use Drupal as a third party CMS with ATG E-Commerce Application?

Hi Friends,
We are planning to use a third party Freeware Content Management System (CMS) for web site content in ATG E-Commerce Application, instead of ATG content Administration or merchandising.
Can anybody please let me know how can I use a third party CMS(Eg: Drupal) with ATG E-Commerce Application?
Regards,
Krishna.

I did create a rule to determine if anyone coming through time eval is a new hire based on vacation elig. date in IT0041. It compares Today to the vacation elig. date and if they match, set a time type indicator to 1. I also added another decision to determine if they were a part time employee and pro-rate their quota entitlement based on what's in their IT0007 weekly working hours. Instead of setting the time type indicator to 1, I recalculated based on a percentage of 40 hrs/wk and then updated the time type to that percentage. In my quota generation rule I use that time type as a multiplication factor to recalculate their new pro-rated amount rounded up to the nearest whole number.

Can't use cf administrator

Similar Messages

Maybe you are looking for