Can the Date be Formatted in BPC? - Version: BPC Release 7.5.112.07/MS

Hi BPC Community,
We want to format a dimension property in BPC 7.5 to display the date as: Day-Month-Year, e.g., 8-Aug-14. In our existing database we have different formats such as: 01-Oct-2002 or 12/31/2014.
Is there a way to set this property to display dates as: 01-Oct-2002 no matter what the actual input is?
Thanks. Barry

Hi Barry,
not sure I've understand but if the data entry is full of evsnd instead of one or some evdres then this could be the cause, better convert the sheets with evdres.
I don't know what "modify application with process application enabled," means. If you can provide the steps I can try this.
go to admin console select the application and click on modify application (right in the action pane)
select the application and click on the checkbox of process application and run it, see if there are errors, if ok retry to open the data entry.
Regards
Roberto

Similar Messages

How do you add a format to the "Date Picker Format Mask" available formats?

Hi,
When I select the Date Picker Format Mask or "Number / Date Format" they doen't have YYYYMMDD or others that may be desired...
How do you add a format to the available formats?
Thank you, Bill

Bill - From the popup help text:
If you need to create a Date Picker item, but the format you need does not appear in the Display As list, select Date Picker (use application format mask). When an application uses this type of date picker, the Application Express engine derives the date format from an item named PICK_DATE_FORMAT_MASK. You can populate this item in two ways:
- By defining an application substitution string named PICK_DATE_FORMAT_MASK
- By creating an application-level item named PICK_DATE_FORMAT_MASK
See the doc for more details.
Scott

How we will pull the data from Sap-Bi to sap-Bpc

Dear Experts,
Thanks for watching this thread.The whole data is available in SAP-BI.
My system environment is SAP-BPC MS7.5.
Now i want to load the data from Sap-Bi to Sap-Bpc ms.For that we need any Interfaces.
How we will pull the data from SAP-BI to BPC-MS for Master data and Transaction Data.
could you please provide me step by step guide.
Please guide me what should i do.
Regards,
Srinivasan.
Edited by: srinivasan.singari on Jul 22, 2011 8:20 AM

Tough Ask..
Because i have done dashboarding thru scritping (Dyanamic fashion tough) ..It is very good ..But when, coming to the one you asked i have the idea how it works but cannot really tell you wich would be better.
Each Route has its own limitations.That really depends on what exaclty your client is looking after..
So if you new to xcelsius and eager to learn ..I suggest you to give a go at all those..May be you can let me know wich is the best one..
1. QAWS,
2. Bex Query --> Crystal Reports --> Live office --> DashBoard.
3. Bex Query --> WebI --> Live Office --> Dashboard..
4. Webservices consuming BI Query,
5. Xcelsius SAP Netwever Connector.
But i suggest as of now use Xcelsius SAP netweaver Connnection...

Is any difference in the CDR output format of CUCM version 6.1.5 and 7.1.5?

Hello,
Customer has a CUCM 6.1.5 cluster which is getting upgraded to 7.1.5. currently the CUCM CDR is sent to a external system (performix) which generates required reports. I would like to know if there is any difference in the CDR output format of CUCM version 6.1.5 and 7.1.5/ its vital to confirm this prior to upgrade as the performix is managed by a different vendor.
Please advise !
Shahid

You can review the CDR documentation here to find that out, most likely there might be some changes
Maintain and Operate Guides
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
CDR admin guides have the field definitions.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

How do i change the $Date variable format on an Ironport ESA to be DD/MM/YYYY

I have an Ironport ESA running ASyncOS 7.6 and i use the $Date variable in notification emails. It is currently formatted in the US way of MM/DD/YYYY but we need it to be formatted as DD/MM/YYYY. Is there any way to do this? The time zone is correct but i can't find anywhere to modify system variables.

There doesn't appear to be any way to change the formatting of that variable. Perhaps you can make use of $Timestamp or $GMTimeStamp instead?

How To change the Date display format to dd.mm.yyyy format

Hello friends
I am expected to display the date fields in my BEx reports in the standard dd/mm/yy format. However, I find that it is getting displayed in mm/dd/yyyy form.
This is creating a bit of a confusion for the client.
Hence can someone please let me know, if I can make any change to the way the date is displayed in the reports.
Looking for a prompt reply
Thanks in advance
regards
Zubin Kurian

Hi Zubin,
There are some corrections in that coding.
year = year+2(2).
CONCATENATE day month year INTO l_date SEPERATED BY u2018/u2019.
Regards,
Yokesh.

How do you change the date/currency format for every user in OSX 10.6?

I imaged a bunch of mac labs at work only to realize the base image has the date/currency set for United States rather then United Kingdom. The regional settings are correct.
I tried changing it on the local admin account but it does not affect a new user that logs onto an AD account.
Workgroup manager does not seem to offer anything either unless I am missing it.
Any ideas?

Hi Uncle,
Page 116 of the Pages'09 User Guide: Control Click the date, Edit Date and Time.
Date and time can also be in a table. Format the table cell.
The User Guide is well worth a read. Download it from the Help menu in Pages.
Regards,
Ian.

SAPUI5 : How to set the date value format for DateTimeInput?

Hi SAPUI5 experts:
I'd like ask 2 things regarding the control: sap.m.DateTimeInput
1: Here is I want to do: show the current date (May 1, 2014) in the control in format as "01-05-2014". But by default the following code shows "May 1 2014". How can I show it as "01-05-2014"?
var oDateTimeInput = new sap.m.DateTimeInput({});
oDateTimeInput.setDateValue(new Date());                   //shown as "May 1 2014"
2. Can someone explain what difference is between the following settings of DateTimeInput?
   ValueFormat
   DisplayFormat
Please write a short code example.
Thanks very much in advance!
Br,
Dong

Hi,
to understand ValueFormat and DisplayFormat, you can refer this example from ui5 testsuite sap.m.DateTimeInput and check the source code.
in one of the example, this is how valueformat and displayformat is used.
// free style date value assingment according to valueFormat
                                                dti3 = new sap.m.DateTimeInput({
                                                                value : "05-29, 2012",
                                                                valueFormat : "dd-MM, yyyy",
                                                                displayFormat : "dd MMMM, yyyy",
                                                                width : "20%",
                                                                change : function(e) {
                                                                                console.log(dti3 + " : " + e.getParameters().newValue + " # " + e.getParameters().newDateValue);
also in both cases, Default value is taken from locale settings.
Regards,
Chandra

The data field format for the sql* loader

the data field in my data file was surrounded by ",", such as "1","2","3",...
so in my control file, I coded
fields terminated by ',' enclosed by '"'
no error after I execute sqlldr command.
however, on data has been inserted into table either.
if I remove "" and ,
the data field changed to 1 2 3 ...
and the data has been inserted into my table
However the first format is what I want. can anyone experienced silmilar situation? please give me a hint.
your help is highly appreciated
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Renali ():
say:
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS (
colname1,
colname2,
colname3)
the data field in my data file was surrounded by ",", such as "1","2","3",...
so in my control file, I coded
fields terminated by ',' enclosed by '"'
no error after I execute sqlldr command.
however, on data has been inserted into table either.
if I remove "" and ,
the data field changed to 1 2 3 ...
and the data has been inserted into my table
However the first format is what I want. can anyone experienced silmilar situation? please give me a hint.
your help is highly appreciated
<HR></BLOCKQUOTE>
null

How can I get Firefox to "grab onto" and then "hold onto" the data signal until I tell Firefox to release it at the end of my session of internet browsing?

ok, I hope that my description of this problem does not come out in such a disorganized fashion that it makes the description difficult to follow. here goes: every 30 seconds to 1 minute (or thereabouts, I'm estimating) my mobile phone's browser (whether Firefox or any other) loses the data signal, so that tje next time that. I click on something, I get an error message that the "data connection timed out, retry" or "network unavailable" or "check that you are connected to that internet", etc. etc. etc. I have downloaded many apps that are supposed to boost data connectivity and/or improve internet speed, blah, blah, blah, till I discovered that was a problem with the server being able to keep up with staying locked onto my browser. in one of these apps diagnostic screens, I found a notation that therr was something wrong with my cell's relative position. well, how could that be, I wondered, since I had "GPS tracking" "GPS reporting" and "location sharing" all enabled? but, then I noticed, on the image of my cell's location as represented by this particular app, that every half minute, or so, the blue dot which represented my cell's location would slip to the left about one quarter of an inch, or so, and in the longitude and latitude part of this app's diagnostic screen I saw that the numerical designations of my cell's longitude and latitude were zero and zero. it suddenly occurred to me that the server had lost sight of my cell because my cell had moved too far out of the range of that server's sight due to the rotation of the earth. well, blow me down, what am I supposed to do to fix that? how can I tell my cell phone's OS to send out some kind of identifying info on a constant basis, so that the server could keep track of it (and I would not lose the signal)? or, conversely, how could I get my cell phone's browser to grab onto the signal and not let go of it until I was done with that internet session, at which time I would then manually release the signal myself? I hope that my explanation of the problem made enough sense that you could follow it and that you can come up with a workable solution for me. oh yeah, my phone is an LG OPTIMUS ELITE 696. thanx, from the enragedkangaroo.

Hello,
I'm afraid I don't think there is going to be much we can do to help you here. The description sounds like an issue with the phone rather than with Firefox specifically.
I don't think the problem can be caused by you moving out of range of the cell, due to the rotation of the earth. The cell towers (that provide phone signal) are sitting on the earth, just like you, and so move at the same speed as you. This might be a concern with satellite phones using Low Earth Obit satellites but this isn't the case here.
I think the best thing to do would be to get in touch with your Phone Operator or Device Manufacturer for support. If you are out of the support period or can't get support from them for some other reason then a standard 'cure-all' for mobile phones is to do a Factory Reset. This will return your phone to its default factory settings and wipe all of your data / modifications off the phone. This tends to solve most problems and is probably what the official support team would tell you to do. I can't guarantee that it will help but it has a good chance.
There are instructions on resetting your phone here:
http://www.hard-reset.com/lg-optimus-elite-hard-reset.html
I hope that helps.

Smart Album : Inconsistency in the Date Type format used inside Aperture ?

Hello,
After using Aperture 2.0 for some days, I tried to create a Smart Album using as creation option for the Album the Date + "is in the Range" option which is leaving two blank fields for filling the two dates which are supposed to be the date limits of the pictures that the user wants to select.
My OS X is set to the italian language so our date format is the dd/mm/yy type.
When I tried to insert some dates in our format (dd/mm/yy) the SmartAlbum seemed to not work at all (not selecting any picture, or was coming out with weird results).
After checking carefully that there was no filter set which could prevent the correct visualization of the pictures I had no explanation for the problem.
At first I thought that this specific option was buggy as the other Smartalbum creation options (Keywords etc.) seemed to work properly.
Then I had the idea and I tried to use the english format (mm/dd/yy) for the two dates inside the date range fields and to my surprise everything worked properly.
So basically it seems that Aperture recognises the dates correctly only giving in input the american date format mm/dd/yy.
What is not so noice is that there is no check on the date limit correctness so basically it is possible to really mess up with the dates.
I'm also actually surprised the Aperture doesn't complies with the OS X date type which could seem the logical thing to do or at least is not consistent with the date type management inside the program because for example the pictures Dates are instead correctly listed in the List View of the browser according to the OS X date type (dd/mm/yy).
I was wondering what is happening in countries where the date separator is not the "/" but the "." like typically used in Germany which would add another variable to the software routine which is interpreting the date input fields.....
Maybe this could help other non english users who could have been confused like me on the same issue....
Did you notice the same behaviour ? Am I missing something ?
Uby

Smart Albums will search in the Folder/Project that is shown at the top of the search HUD as well as all Folders and Projects "below" in your structure. However, it will not search through any Albums in that structure. Here is an example:
You images are always stored in Projects (yellow icons) and lets say this is how it looks:
FolderA/ProjectA (this Project stores: ImageA1, ImageA2)
FolderA/ProjectB (this Project stores: ImageB1, ImageB2)
Let us say that you have two Albums like below but there is an image from ProjectB in AlbumA, which looks like this:
FolderA/ProjectA/AlbumA (this Album has pointers to: ImageA1, ImageA2, ImageB1)
FolderA/ProjectB/AlbumB (this Album has pointers to: ImageB1, ImageB2)
If you create a Smart Album below ProjectA it will only show ImageA1 and ImageA2 since it only search ProjectA and not AlbumA.
This may be the issue you have.
Are you 100% sure that the Project your Smart Album is pointing at does include the images you are trying to search through. As you see above then it won't find them if they are only in the albums below that project.
Here are a few rules that I follow in order to avoid getting confused over where my images are located: A) Only include images in albums below a project that are stored in that project. B) Create all my smart albums at top library level and if necessary add extra filters like project name.
Hope you understand.
Karsten

How to change the date time format in jsp

Hello Sir,
I am trying to convert the date from one format into another format.
In SQLServer one fields type as datetime.
when i tried to display it in jsp with String variable it shown like below,
2006-08-16 09:11:23.0
how to format this value as
Wed, Aug 16, 2006 09:11 AM
my code is
java.text.SimpleDateFormat fmt= new java.text.SimpleDateFormat("EEE, MMM d, yyyy K:mm a ");
fmt.format(string value fetch from dtabase field);
Plz provide me the solution asap. very urgent request.
Regards
venki.

Hello Sir,
I am trying to convert the date from one format into
another format.
In SQLServer one fields type as datetime.
when i tried to display it in jsp with String
variable it shown like below,
2006-08-16 09:11:23.0
how to format this value as
Wed, Aug 16, 2006 09:11 AM
my code is
java.text.SimpleDateFormat fmt= new
java.text.SimpleDateFormat("EEE, MMM d, yyyy K:mm a
fmt.format(string value fetch from dtabase field);
Plz provide me the solution asap. very urgent
request.
Regards
venki.Have a look in to the below code
import java.text.SimpleDateFormat;
import java.util.Date;
public class DateFormatTest
public static void main( String[] cmdArgs )
throws Exception
SimpleDateFormat sdfInput =
new SimpleDateFormat( "yyyy-MM-dd" );
SimpleDateFormat sdfOutput =
new SimpleDateFormat ( "EEE, d MMM yyyy hh:mm aaa" ); //Change the patterns in to what ever u need
String textDate = "2001-01-04";
Date date = sdfInput.parse( textDate );
System.out.println( sdfOutput.format( date ) );
i will suggest u to look in to the API doc you will come to know lot many things.

How to get the date time format in OCI

How to get a date time format in OCI instead of only date

You would have to use the OCIDateTime datatype for this. Refer to
OCI documentation for more details.

How long can the data in PSA be kept?

Hello all,
If a PSA is used for data staging, how long can/should the data be kept in it in a real-time scenario?
Your help will be very much appreciated,
points will be awarded too.
Thanks
S N

HI ,
It always depends on the Frequency of data load and the retention of the data in the system . Ideally we only keep 2 days of data in PSA in case of full load and then keep all the delta loads in the PSA including the Intialization Request in the PSA , so that any problem occurs we can load the data from PSA .
But before all that u need to diccuss with ur basis team regarding space or table space . And according to that u need to keep the requests in System.
Assign points if it helps....
Regards,
Vijay

Can the Date of the messages in Mail.app all appear as "date_sent"?

I have an IMAP mail account, and it has been added into the Mail.app on my Mac (OS X Yosemite 10.10.2).
As I known, a mail message has three "time stamps", which are date_sent, date_received, and date_internal.
The first two time stamps(date_sent & date_received) are stored in the source of the mail message,
and the last one(date_internal) is stored on the mail server.
This date_internal is the time when this mail message is received on the server for the first time.
Normally, date_received and date_internal are the same or very close to each other.
However, when some old mail messages are synced back to the mail server, these two time stamps are quite different.
For example, I miss-deleted some mail messages on the server, and I have the backup files on my Mac, so I can sync these messages back to the mail server through IMAP protocol.
In the situation above, the date_received is still the origin received time because it is always stored in the source of the mail message, while the date_internal then becomes the time when I sync this mail message.
Unfortunitly, Mai.app uses the date_internal as the default Date appearing in the list, not the date_received, not the date_sent, and even no settings about this can be found.
Can the Mail.app shows the date_received instead of the date_internal in my mail list? Thank you so much!
Btw, I have tried the AppleScript to change the dateReceived element, but the system said my operation is not allowed.

Maybe I'm missing something...?
In Mail.app -> View -> Columns you can add various columns to the view.
Is that not what you want?

Can the Date be Formatted in BPC? - Version: BPC Release 7.5.112.07/MS

Similar Messages

Maybe you are looking for