How do you add a format to the "Date Picker Format Mask" available formats?

Hi,
When I select the Date Picker Format Mask or "Number / Date Format" they doen't have YYYYMMDD or others that may be desired...
How do you add a format to the available formats?
Thank you, Bill

Bill - From the popup help text:
If you need to create a Date Picker item, but the format you need does not appear in the Display As list, select Date Picker (use application format mask). When an application uses this type of date picker, the Application Express engine derives the date format from an item named PICK_DATE_FORMAT_MASK. You can populate this item in two ways:
- By defining an application substitution string named PICK_DATE_FORMAT_MASK
- By creating an application-level item named PICK_DATE_FORMAT_MASK
See the doc for more details.
Scott

Similar Messages

  • How do you add an image in the signature

    Hi,
    How do you add an image to the signature area.
    The Insert/edit image is not available when in My Settings | Personnel Info | Signature
    Regards
    Ray Farmer

    You need to link the image.  See the example for the Canada flag below.
    <img src="http://forums.ni.com/ni/attachments/ni/130/6908/1/Canada-small.PNG" border=0>
    Replace with the image you like.  This goes into the signature box within the profile tab of the personal settings.
    RayR

  • How do you add an entry in the monitor log from the update rules?

    How do you add an entry in the monitor log from the update rules?

    Check this link for relevant SAP recommended implementation.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0c22e690-0201-0010-9581-832abdb5d50d
    Sample Code (Routine) available on the last page of the document.
    award points if useful

  • How do you add safari favourites with the new iOS?

    How do you add safari favourites with the new iOS?

    Do you mean you want to sync your desktop Safari bookmarks to iOS? This is done in iTunes when you sync the iOS device. There is a box to check to make this happen.

  • How do you add a mailbox to the iphone4s?

    How do you add a mailbox on the iphone4s?

    If you have an IMAP account, then add it on your server and it will appear on the iphone.
    If you have a POP account then you cannot.

  • How do you add a grid on the viewer?

    How do you add a grid on the viewer so you can lign up text and whatnot?  Thanks!

    I do just as you outline. It's covered in my article on Alignment Grids: http://forums.adobe.com/message/4319250#4319250
    I also agree that the Snap Tto Grid would be nice, like in Photoshop. I have sent in several Feature Requests for Grids, with full functions, like Snap To, though not recently.
    Hunt

  • How do you add a custom label to dates in contacts.....

    How do you add a custom label to dates in contacts- I have multiple birthdays in contact group and want to change label through customise to add additional birthday- unless another way to add second birthday to contacts and identify each one?????? or way to link contacts with same address phone number etc but id birthdays?????

    You have some contacts with more than one birthday?
    To add a custom label for a date, select Edit for an existing contact. Select Add Field. Select Date. Scroll up with the Info window above the date selection and select Other for the new date selection. Select Add Custom Label and then select this label for the new date field for the contact.
    As far as linking dates with multiple contacts, the answer is no to that.

  • How do you add multiple effects to the same clip

    How do you had multiple effects to the same clip. I have tried for hours
    I would like to add sepia and aged movie to the same clip. I heard it can be done, but have not figured out how to do it.
    anyone please.

    Normally you can apply only one video effect at a time. But for Sepia, black and white, and others that can be done through the video Adjustments tab, you are in luck.
    Aged Movie should already have a bit of a sepia tone.
    If you want more of a sepia tone or you want to fine tune the sepia effect you can do it with the Clip Inspector/Video Adjustments tab.
    Note: Thanks to Jeff Carlson of MacWorld for this tip.
    If you're looking for a washed-out sepia appearance, first open iMovie's preferences and turn on the Show Advanced Tools option, which adds more controls to the Video Adjustments HUD and other areas of the program. Select the clip you want to alter and press the V key. Set Saturation to 0 percent, and then drag the Red Gain slider to 143 percent, the Green Gain slider to 90 percent, and the Blue Gain slider to 53 percent (feel free to tweak these settings to customize the results). Click on Done when you're finished. Note that the clip thumbnail still appears in color, as the video was shot, but the preview reflects your changes.--JC
    If you need to apply the same settings to all clips, first select the clip you have adjusted. Then Edit/Copy. Then Edit/Select All. Then Edit/Paste Adjustments.

  • How do you add a source to the Health app?

    How do you add a source (ie, Nike +) to the new Health app?

    http://help.apple.com/iphone/8/

  • How do you add a percentage in the preloader?

    How do you add text that changes on the preloader as your site loads? for example a standard "0%" ... "100%" or even controll what frame a gif image displays?
    Thanks

    It is not easy to see and I found it by messing around. First of all put them in daye order by dragging the screen down and touching the little alarm clock at the top.  Then touch the space below the earlies reminder and a new one comes up. It defaults to 'today' so you have to touch the new reminder and then touch the 'i' button that appears. You can then change the date and time etc. No easy.
    I dont understand why Apple do these thongs before updating the user guide!
    Hope this helps.

  • How do you add a reminder on the ipad in iOS 7?

    I hate to admit defeat, but I'm stumped. How do you add a reminder in Reminders on the iPad 2 in iOS 7?

    It is not easy to see and I found it by messing around. First of all put them in daye order by dragging the screen down and touching the little alarm clock at the top.  Then touch the space below the earlies reminder and a new one comes up. It defaults to 'today' so you have to touch the new reminder and then touch the 'i' button that appears. You can then change the date and time etc. No easy.
    I dont understand why Apple do these thongs before updating the user guide!
    Hope this helps.

  • How do you add Jam Packs to the Logic Express 8 Loop Library?

    I'm new to both Logic Express and Jam Packs. I just installed the new Voices Jam Pack and it is installed in the audio folder in my user library but it isn't recognized by logic, since the loops don't show up in the loop browser. I do not know how to add them to my loop library so if anybody knows how to add them I would greatly appreciate any advice. Also, when I installed logic express, my garageband loop library disappeared; is this just because all the loops were converted to a new format for logic to use?

    Simply drag & drop your Voices Jam Pack folder into the LE8 loops browser and they will be indexed and added to the library. See page 644 in the manual for more information.
    Re: GarageBand loops, you can check your HD/Library/Audio and your ~/Libray/Audio for all your Apple loops to make sure you still have your GB loops in either .aif or .caf formats. I still have both versions on my iMac, but if I remember correctly, when I installed LE8 I created a new folder for Apple loops in order to preserve my originals. Once you find your GB loops, try dragging & dropping them into GB's loop browser. If their format was changed perhaps GB just needs you to point to them.

  • How do you add multiple cells to the LARGE function?

    I want to add several cells which are contained on different sheets and tables to the same LARGE function and select the first ranking cell value.
    How do I add these cells as a single argument for this function?

    "...and select the first ranking cell value."
    Hi eobet,
    If your actual goal is as stated, you could use MAX, which will accept a list, a range, or a list of ranges as arguments.
    LARGE accepts only a single argument to establish the set of values, plus a single argument to establish the rank of the desired value. That means you need to collect all of the vlues into a sngle contiguous group/range, then specify that range as the set. The avantage, ofcourse, is that with LARGE, you can specify that you want the 'third largest' value in the set.
    Here's an example.
    The data set is column B on tables Data 1 and Data 2.
    The set is collected into a single contiguous range on the table Aux (which may be hidden, or placed on a separate sheet).
    LARGE collects the nth value from the collected set in Aux, using this formula in the table Summary:
    A2, and filled down: =LARGE(Aux :: A:B,ROW()-1)
    MAX returns the largest value from the original data set on Data 1 and Data 2, using this formula on the table Summary-1:
    A2: =MAX(Data 1 :: B,Data 2 :: B)
    Regards,
    Barry

  • How do you add Blind Copy to the options listed in the mail address book?

    My I-Mac is the 20 inch Intel model running OS 10.4.7 and mail is 2.1.1.
    When trying to forward mail I can chose Bcc by going to "View" and selecting Bcc, but then when I go to the address book to select the names that I want to Bcc there are only two options listed in the address book and they are "To and Cc". The only way that I have been able to set the addresses into the forwarding message is to drag each address from the address book and place it into the Bcc field on the forwarded note. There must be some way to enable the address book to list Bcc. Does anyone know how? Thanks
    Bill
    I-Mac Model 5,1   Mac OS X (10.4.7)   1 Gig ram/Intel core 2 Duo
    I-Mac Model 5,1   Mac OS X (10.4.7)   I-Mac Intel 2 Duo

    Hi Austin,
    Thanks for the response, but you kind of misunderstand my question. I actually want something much simpler than this:
    When the Mail.app Data Detection recognises a telephone number or address, via a drop-down menu, I have the option to create a new contact or add the data to an existing contact. If I want to create a new AddressBook contact I am presented with a pop-up. This pop-up gives me the choice to enter a persons name, or by ticking the box, designate the entry as a company. I can edit the person's or company's name - this is often necessary as Data Detection, though generally quite good, doesn't always pick the correct data; for instance when the data is in the body of a forwarded e-mail. But what I can't seem to do is edit the entry to include a Contact Name and a Company Name. I may have to hand enter this information, I can accept that, but what I want to avoid is having to move away from Mail, open AddressBook and complete the contact creation therein.
    What I simply require is the option to enter at least the standard AddressBook 'new contact' template fields from within Mail. So I need to know: Is there is a way of configuring the pop-up fields beyond the Mail.app defaults?
    I hope this makes sense..
    Thanks again..

  • How do you add a hyperlink on the latest Keynote?

    I want to know how to add a hyperlink in the latest Keynote.  I am running Yosemite.  I have a Macbook Pro 13 inch.  Thank You.

    right click an object on the slide
    choose;   Add Link
    in the Link To, dropdown menu;    select Webpage
    in the Link text, entry box;   type the URL in the form:   www.mypage.com

Maybe you are looking for