Can the user unlock his AD account in FIM 2010 R2

Hi all
can a user unlock his AD account from FIM portal.
Thanks
Teka

Hello,
currently not out-of-box, but you can do this by customizing the portal.
MIM vNext will provide Self-Service Account Unlock, you can check the
preview on connect for that.
I currently have Account Unlock through helpdesk but it is possible to change this to self service.
You can use the
powershell activitiy for that for example:
1. Change RCDC for user UI and add a boolean attribute for account unlock.
2. On change of this attribute trigger a MPR with the PS activity that unlocks the account.
3. Reset the unlock account attribute to normal state (false).
4. create approp. permission MPRs to allow users to change only their own account unlock attribute.
thats it.
-Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com

Similar Messages

HT202233 If I made the mobile account for a network user, can this user unlock the FileVault2-disk?

My Mac is connected to Microsoft Active Directory. Every time I schould unlock the disk with the local admin, then login as network user.
If I made the mobile account for a network user, can this user unlock the FileVault2-disk?
Thanks.

Yes, but the FileVault password won't be updated automatically if the login password changes.

Can RH8 be installed by the admin using his own account?

Please excuse this basic yes/no question, I could not find any info about RH8. In older releases it was once recommended to install RoboHelp using the account of the USER who would later use the program (not the admin). For this, admin rights had to be assigned to the user during installation and removed again afterwards.
Is this procedure still required for RH8 or can RoboHelp now be installed by the admin using his own account?

The options are the user account with admin rights attached or the admin account that will have those rights by default.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Okay i my friend gave me his iPhone 4 and i tried to reset everything but i couldn't so i rebooted it and now I'm stuck on the activate iPhone screen but the thing is his apple account dose not work so what can i do plz help

plz help!!!

Get your friend to remove the iPhone from his iCloud account: Find My iPhone Activation Lock: Removing a device from a ...

What is the user exit for automatic account determination in PO

Hi Experts
I ned to know what is the user exit for automatic account determination in PO
my client needs the document type to defines Account Assignment Category.
choosen a document type Account Assignment Category is defined automatically. you can't choose
a wrong Account Assignment Category from the drop down list.
thanks form you help.

If this is the case than why don't you use the Transaction variant
SHD0: http://www.mortenhjorthnielsen.dk/Security/transactionvariants.htm
If you have knowledge of Transaction variant then you can use SHD0 tcode and generate the transaction using default type and give that transaction to user instead of ME21N so they will not have the issue.
The exact solution for your problem is as follows
Go to Tcode SHD0 and enter the transaction variant
In T code field enter ME21N and then enter the ZXXXX or the name you want to keep in transaction variant field and hit create button
This will take you to ME21N transaction and here you just enter the data but make sure you enter the A/c which you want to default.
Once you finish system will save this one as a variant
Every time you hit or enter the pop up screen comes here you just hit enter and whichever data you want to default that you have to select in the Popup by checking the Box
W content and output only for your case the field XXXXXXXX should be selected for W content and output only
Make sure you have value 1 in contents field
If not then restart the variant again and on the ME21Nscreen reselect the invoice field
Later exit and save (save in the object which you can transport)
Then from SHD0 transaction select GOTO create variant transaction and here you careate the tcode and use that tcode for ME21N (e.g ZTRAN - For specifix sto)

My husband wiped out the library on his itunes account and replaced it with mine. Any ideas on how to get it back? Our laptop does not have his library either. only mine.

My husband wiped out the library on his itunes account and replaced it with mine. Any ideas on how to get it back? Our laptop does not have his library either. only mine.

How exactly did this happen? Were you using separate iTunes libraries on separate user accounts on the laptop?
B-rock

How do I replace someone else's Mac ID with my own? Bought iPhone second hand. Previous owner re-set the phone but his ICloud account stayed on now my phone. He uses his macID on his new iPhone now?? Any ideas, as this issue is blocking my access to iTune

How do I replace someone else's Mac ID with my own?
Bought iPhone second hand on TradeMe.
Previous owner re-set the phone but his ICloud account stayed on now my phone. He uses his AppleID on his new iPhone now and, understandably, does not want to give me his password. Any ideas?? Please.
This issue is blocking my access to iTunes and any other file from my home computer. It keeps on telling me that I have to autorise my computer to pass on files, yet, it seems, for all this to happen, I need to get logged in through the phone's Apple ID. This of course is different to my one on my computer - and I have no password for it.
This phone is not stolen!! I payed still a fair bit for it. Am still in contact with the previous owner. He doesn't know how to fix the problem either.
Would appreciate any suggestion ????
Thanks
SamSings

Settings>general>resets>erase all content and settings.
That will put it back to its out of the box state. Set it up with your own apple Id.

Help!!! How do I get the bit color depth the user has his screen set to?

Help!!! How do I get the bit color depth the user has his screen set to?
Thank you.

i'm not sure if it's what you 're looking for but it worked for me:
GraphicsEnvironment ge = GraphicsEnvironment.getLocalGraphicsEnvironment();
GraphicsDevice[] gs = ge.getScreenDevices();
for(int i=0;i<gs.length;i++){ //length is 1 (= i have only one screen? )
GraphicsDevice g=gs[ i ];
int nBits=g.getDisplayMode().getBitDepth(); //method getDisplayMode() only in jdk1.4 , i think
System.out.println( nBits+"");
output is 32 if i set my screen color to 32bits, 24 if...24, ...

I recovered my stolen iPhone 4s thru' IMEI tracking and Police's help. The thief had set up the phone with his apple account. He is now out of police's contact and i could not retrieve his Apple/icloud PASSWORD which i need to ACTIVATE my iPhone. Any way?

i recovered my stolen iPhone 4s thru' IMEI tracking and Police's help. The thief had set up the phone with his apple account. He is now out of police's contact and i could not retrieve his Apple/icloud PASSWORD which i need to ACTIVATE my iPhone. Any way?

No, not without help from the thief.

Can multiple users access 1 iCloud account for file sharing?

I work in a team where everyone has an ios or mac device. Is it possible, if i were to create a new @me.com account, for all team members to use this as their iCloud ID and therefore be able to share documents?
Would there be a limit as to how many users could do this?

Ok have just spoken with Apple Support and the guy didn't fill me with confidence in terms of his knowledge.
He stated that the max users sharing a iCloud account would be 11 (random number IMO). Also that we could only share/edit docs if we were on the same network which kind of defeats the point.
Can anyone verify or correct me on the above?

Why can the users in one child domain logon to computers in a different child domain in Server 2012 R2?

I have setup a test system. It has a domain with 2 child domains. DomainA.xyz.com has users and workstations. DomainB.xyz.com is a resource domain and has servers. wyx.com is for IT administration.
Users in domainA can logon to the domainB computers. I searched to find out why it was so. I found a "NT AUTHORITY\INTERACTIVE" entry in the local users group that enables this.
This is rather confusing. 1. When a user enters his credentials, he is not logged on and therefore would not be "INTERACTIVE" at that time. 2. If everybody that signs on a computer is interactive, then does that mean
everyone in the forest can sign on?
So my issue is: Can I delete the "INTERACTIVE" entry in the local users group and not cause any problems? I want to protect the resource domain from users signing on to them and give them access to the resources they need.

Hi,
The Interactive group includes all users that have logged on locally.
In addition, it is not recommended to remove the
interactive group from the local user group since it would cause all kinds of problems. For more detailed information, please refer to the similar thread and link below:
Interactive
group
Staring
at a blank desktop, due to Interactive missing from Users group
Best regards,
Susie

How to identify the user who has created accounts,lead, Opp in portal

Hi experts,
I am working in CRM 5.0 now i want to know the user who has created a particular account, Lead, and opportunity in Portal not in GUI kindly give some inputs regarding this .
Thanks in advance
Amar

Hi Frederic,
Thanks for your reply.
But is there any way by which we can make it happen in PCUI.
The customer is very particular about it. They use only PCUI to create new accounts and they want a facility to view change history in PCUI Account Application itself. They are not interested to go back to GUI to know change history for that BP.
We have just checked whether any related BSP structures containing change fields are assigned to COMM_BUPA but not successful.
Kindly help with a possible solution.
Regards,
Amar

If the iOS app I create emails the user, can the user upgrade from the link in the email or is that against the guidelines?

I want to create an iOS app and for a variety of reasons (subscription, multiplatform, etc) I can't use the Apple app-store payment sytem.
However, if the user creates and account with my iOS app and we then email the user at a later date. Can they upgrade from the link in the email, or is that against Apple policy as well?
Thanks!
Ryan

i am faceing a file download problem too..........
i am protecting jboss application,,,,using apache, and jk....
all work fine except for open a file(word,excel,txt,etc).
Disable the policy domain, everything goes just fine. microsoft file dialogue opens,you can open the file directly, or save it to your computer........
Enable the policy domain,, you can only save the file to your computer(file content is also correct),,,but cannot open it directly.it says the file path could not be found......but if the word/excel application is already running, you can open it fine...
PS:not a computer issue,,,every computers faceing the same problem
any avoice from you is good to me...............thanks very much

Can the user download the report file to their own destination?

Hello,
I want to have a report run that will take a destination as provided by the user and save the report output there. Is this possible? (Its a delimited file.)
Thanks,
J

You can use WEB.SHOW_DOCUMENT to do this.

Can the user exit EXIT_SAPMM07M_004 be called from an FM exit in my code?

Hi ,
When I create a Goods Receipt by tx MB1C , an MM adapter(FM user exit) is kicked off in my workspace creating documents wrt to that goods receipt.However if a batch does not exist during MB1C , it says that a batch would be created.But when i do a save , the user exit is kicked off before it returns to the SAP code to create a batch.As a result no MM documents are created in my workspace.Now I want that the batch be created while in my user exit and I want to implement the customer user exit EXIT_SAPMM07M_004(for copying the batch characteristics) .Is it possible to call this exit from my code?Kindly suggest.

> When I create a Goods Receipt by tx MB1C , an MM adapter(FM user exit) is kicked off in my workspace creating documents wrt to that goods receipt.However if a batch does not exist during MB1C , it says that a batch would be created.But when i do a save , the user exit is kicked off before it returns to the SAP code to create a batch.As a result no MM documents are created in my workspace.Now I want that the batch be created while in my user exit and I want to implement the customer user exit EXIT_SAPMM07M_004(for copying the batch characteristics) .Is it possible to call this exit from my code?Kindly suggest.
Can you call the user exit? - Yes ofcourse.... but why dont you just add the same code that is in your exit instead of calling the user exit?
User exits are developed and called from appropriate places where sap can take the changes and apply to the transaction. there is no restriction on calling the user exit (atleast programmatically) but you need to think 100 times before you call the user exit.
For example, you want to call user exit 'A' in your program because you want to use the code in this user exit in your program '1'. Why dont you just write the code in program '1' with what is in user exit 'A' ?
Calling user exit in your program does not really helps. Better find out different ways. once again, user exits are embedded in sap business applications and remember they are not independent FM's as you think
Good luck

Can the user unlock his AD account in FIM 2010 R2

Similar Messages

Maybe you are looking for