Can we call a report program in smartforms
hai
I need my report progrm output should be called in smartforms.
i.e my report output is displayed in a table in smartforms
pls give suggestion
Hi,
You cannot call report program in smartform.
But,you can call the smartform in your report program.
Refer these links:
how to write driver programming in smartforms
what is the basic purpose of driver program
Regards,
Sravanthi
Similar Messages
-
Dear SAP Crew,
In dynamic action, we can call routines through indicatiors.
In that routine, Can we call a report program or schemas???
Kindly clarify with some scenario.
Thks & Rgds
Krish SathyaHi Krish,
In the routine you should be able to SUBMIT the program/report you need to execute.
Cheers,
Aditya -
Calling a Report Program In Web Dynpro Using Submit statment
Hi all,
Can any one suggest how can i call a report program form Web Dynpro using Submit statment. I tried to call it its showing Field symbols not defined error. Is their any other ways to call Report in a Web Dynpro?. I have posted the error message when i tried using SUBMIT ZRR AND RETURN CONTROL
Field symbol has not yet been assigned.
The error occurred on the application server mnghcmsap_HRS_00 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: CHECKBOX_OUT of program SAPLKKBL
Form: GEN_LINE_OUT of program SAPLKKBL
Form: DATA_OUT_SIMPLE of program SAPLKKBL
Form: LIST_OUTPUT_NEW of program SAPLKKBL
Form: FIRST_LIST_DISPLAY of program SAPLKKBL
Module: LIST_DISPLAY of program SAPLKKBL
Function: K_KKB_LIST_DISPLAY of program SAPLKKBL
Method: PRINT_BACKEND of program CL_GUI_ALV_GRID===============CP
Method: SET_TABLE_FOR_FIRST_DISPLAY of program CL_GUI_ALV_GRID===============CP
Form: PBO of program SAPLSLVC_FULLSCREEN
Edited by: VINMANO on Jul 22, 2009 2:54 PMHI,
Its possible to call report program from Web dunpro...
chk out dis link,
calling report(se38) in webdynpro abap
By the way are using field symbol anywhere and left it unassigned?
Thanks,
Divya.S -
Calling a report program in another program.
can we call on report program in another report program. If yes, please give me the right syntax. Thanks in Advance.
Hi,
Use SUBMIT AND RETURN statement. In below given codes,
I'm sending an internal table t_spfli to a memory id abc. After that I'm calling another program by using SUBMIT <program name> AND RETURN.
Check these two programs
PROGRAM 1
REPORT z_abap_memory.
DATA:
w_carrid TYPE spfli-carrid,
BEGIN OF fs_spfli,
carrid LIKE spfli-carrid,
connid LIKE spfli-connid,
fltime LIKE spfli-fltime,
END OF fs_spfli.
DATA:
t_spfli LIKE
TABLE OF
fs_spfli.
SELECT-OPTIONS:
s_carrid FOR w_carrid.
START-OF-SELECTION.
PERFORM get_spfli.
PERFORM disp_spfli.
AT LINE-SELECTION.
IF sy-lsind EQ 1.
EXPORT t_spfli TO MEMORY ID 'ABC'.
SUBMIT z_ABAP_MEMORY1 AND RETURN.
ENDIF.
END-OF-SELECTION.
PERFORM disp_spfli.
*& Form get_spfli
* text
* --> p1 text
* <-- p2 text
FORM get_spfli .
SELECT carrid
connid
fltime
FROM spfli
INTO TABLE t_spfli
WHERE carrid IN s_carrid.
ENDFORM. " get_spfli
*& Form disp_spfli
* text
* --> p1 text
* <-- p2 text
FORM disp_spfli .
LOOP AT t_spfli INTO fs_spfli.
WRITE: / fs_spfli-carrid,
fs_spfli-connid,
fs_spfli-fltime.
HIDE:
fs_spfli-carrid,
fs_spfli-connid.
ENDLOOP.
ENDFORM. " disp_spfli
PROGRAM 2
REPORT z_abap_memory1.
DATA:
BEGIN OF fs_spfli,
carrid LIKE spfli-carrid,
connid LIKE spfli-connid,
fltime LIKE spfli-fltime,
END OF fs_spfli,
fs_fl LIKE fs_spfli.
DATA:
BEGIN OF fs_flight,
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
END OF fs_flight.
DATA:
t_spfli LIKE
TABLE OF
fs_spfli.
DATA:
t_fl LIKE t_spfli.
DATA:
t_flight LIKE
TABLE OF
fs_flight.
IMPORT t_spfli FROM MEMORY ID 'ABC'.
t_fl = t_spfli.
SELECT carrid
connid
fldate
FROM sflight
INTO TABLE t_flight
FOR ALL ENTRIES IN t_spfli
WHERE carrid = t_spfli-carrid
AND connid = t_spfli-connid.
LOOP AT t_flight INTO fs_flight.
WRITE: / fs_flight-carrid,
fs_flight-connid,
fs_flight-fldate.
ENDLOOP.
Regards
Abhijeet -
Itz possible to call one report program into another program
hi guys,
i had a doubt that can i call a report program into another report program by declaring their name into the second program like as we calling Includes ,function modules and like class and their methods .
if anybody done this or know how to do this, give me the details and explination about this friends
if it possible with screenshots and codings
Thanks & Regards
SaigijeoPlease search before posting, do not ask basic questions here.
Always do your own work before turning to the community with specific problems.
Thread locked.
Thomas
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] -
Can we call a bdc program from report program
hi
can we call a bdc program from report programYes you can any program from another program using
SUBMIT <repname> statement
SUBMIT <repname> USING SELECTION-SCREEN dynnr.
or
SUBMIT <repname> VIA SELECTION-SCREEN USING SELECTION-SET variant
SUBMIT <repname> VIA SELECTION-SCREEN WITH SELECTION-TABLE rspar
etc.
Regards
Prax -
Calling one report program from another
Hi All,
i am calling one report program from my program & exporting it's output to SAP-SPOOL using SUBMIT statement. I want to fetch the spool no in my program for this spool. Please guide me how this can be achieved? i have tried SYST- SPONO but it's not working.
Thanks & Regards,
Chetan.Hi,
Initially check this it might be helpful to u.
http://help.sap.com/saphelp_sm40/helpdata/en/30/cc154219fce12ce10000000a1550b0/content.htm.
Even use the function module slike Job_open , Job_close this is also one of the methid to achive spool requests.
Regards,
Sana.
Reward with points if found helpful.. -
Calling a Report Program from Web Dynpro
Hi all,
I have a requirement, where i have to call a report program from web dynpro?. Wether its possible to call a report program in web dynpro?. Is we can call it, how this functionality has to be achived?Hello,
Yes it is possible to call report using SUBMIT statement from one of the method defined in COMPONENTCONTROLLER's method tab.
Once you define the method with SUBMIT statement then call that method with proper event.
Rest configuration will remain same for ABAP webdynpro.
Hope this helps.
Thanks,
Augustin. -
Can we call a report in another report?
I have developed a XMLP report for AR receivables for a customer and another XMLP report for AP vouchers for a customer.
Now my requirement is to develop a report for AR/AP Balance for a customer,which is combination of above 2(ie AR Receivables report + AP vouchers report).
What is the possible solution to above mentioned requirement??
Can I call a report from another report(for ex AP vouchers report from AR Receivables report).Is this possible?
If yes,please explain...
Or are there any alternatives to this requirement??
Thanks in advance!!Hi,
Calling another report in a report? Not sure about your requirement but you can do fnd_submit/fnd_request.
OR, if you need AR/AP balance,... here's an alternative solution:
If you're in R12, there is the "Automatic Netting (AP/AR)" feature in Payables. You could check on the available report if it fits your need.
In 11i, you may run "Supplier Customer Netting Report" (ARXSCN). This is an OReport(RDF) and could be converted to XMLP. This report is designed to display the net balances in AP and AR for Vendors and Customers with the same name, NIF Code, or VAT Registration.
Hope this helps.
Rownald -
Can we call a window of one smartform in another smartform
can we call a window of one smartform in another smartform?
hi
No it is not possible
regards
vijay
reward points if helpful -
Can I call a report from pl/sql?
How can I call a report from pl/sql? I would like the output to be pdf and have it outputted to the screen?
We are running Oracle 10g database and 10.1.2.3 application server on LInux Redhat 4.
Thanks.
Shirley
Edited by: jonesfnalgov on Jul 12, 2011 2:17 PM
Edited by: jonesfnalgov on Jul 12, 2011 2:18 PMHello,
a package is provided : srwAPIins.sql installs the Event-Driven Publishing API.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_evnt.htm
The Event-Driven Publishing API is a PL/SQL package that provides the basic functions required for the development of procedures that respond to events in the database. Event-driven jobs are submitted using the HTTP protocol. The server assigns a unique job_ident record to every call, useful for tracking the status of the job.
Regards -
Can we call 10g Report from Form-6i???
Hi buddies.....Can we call a report developed in 10g reports from a 6i Form using Run_Report_Object???
Hi,
you can run the reports in 6i. There won't be any problem. I have checked with the RDF file.
I don't know whether the REP file which is generated in 10g can be opened in 6i or not.
Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks. -
How can we call a report from a form.
how can we call a report from an existing form.
Have you searched the Forms help system? It shows you how to use RUN_REPORT_OBJECT
-
Can I call a C program in trigger, and pass updated data to this program?
Can I call a C program in Oracle trigger, and pass updated data to this program?
Thank youAn update trigger has access to both the old and new values. Your update trigger can call an external procedure (a C program) and pass the old and new values as parameters. For example:
CREATE OR REPLACE TRIGGER <tname> BEFORE UPDATE OF <tab> FOR EACH ROW
BEGIN
pkg.proc(:old.col, :new.col);
END;
Where pkg.proc has been created as an external procedure. -
How Can I call Crystal report from R3?
Hi experts,
How Can I call Crystal report from R3?Hi Bill,
Can you please be specific and could you please provide the steps
Thank you
Maybe you are looking for
-
Problems with Microsoft office after system problems with 10.3.9
I had some problems with my G5, it lost the memory for the dock etc but I have been able to fix that but now none of the programs in the Office package are working and there is also problems with Illustrator CS2 they all crash at startup, I have trie
-
Hello PI friends, I'm connecting PI to an external SOAP web service developed in .NET. I created a scenario which should be very close to what I need but I was getting an error when testing in RWB: SOAP: response message contains an error XIAdapter/H
-
API to close purchase documents and to update blanket agreement amount
Hi, Are there any API's to close the standard purchase order and blanket agreements. Also do we have any API to update the blanket agreement amount. Regards, Amitesh
-
Hi The existing company is split and a new company is formed with some additional departments. Requirement is to create new set of books and the balance needs to be moved from the existing company. Eg. some of the bank accounts will be transferred to
-
No Connection to Target Component while configuring Transaction Launcher
Hi All, I was trying to launch a custom BW TCODE from the CRM system using Transaction Launcher. While configuring it, at the step where we mention the Logical system name, BOR Object Type and Method name, I get a message like 'No Connection BW Clien