Can we call multiple Smartforms from single Driver Prog?

Hi all,
Can we call multiple smartforms from single Driver Program. Here Driver program is custom Program.
I want to give Print Parameter only once and output should get printed one after the another smartform in same order of smarforms were called.
If yes, then how?
Thanks in advance.

Yes, you can do this in your Smartform driver program.
Each time you call you Smartform function module you will need to change the values in structure OUTPUT_OPTIONS slightly.
On the first call set TDNEWID to X.
After this, set it to space
On the last form set TDFINAL to X.
This will put all of the output into one spool request, in the order they are called in the program.
Regards,
Nick

Similar Messages

Calling a Smartform from different driver programs

Hi everyone,
I have two driver programs and from both these programs i'm calling the same Smartform.
I have a field in smartform. and i want it to be printed for one program but not printed when the
smartform is called from the second program.
Pls. can anyone help me out about how this can be achieved.
Thanks in advance.
Regards
Tanu

Create an import parameter (flag) in your smartform interface and when you call your smartform from one of these drivers pass assume 'X' value to this flag. And add a condition for the field you want to hide. like below.
if flag = 'X'
show or don't show.
endif.
Edited by: Gungor Ozcelebi on Jul 3, 2009 5:08 PM

Call Multiple Files From Single ColdFusion Scheduled Task

Our host only allows us to have 5 scheduled tasks per account but we need to run cfml applications to import data for multiple sites (at least 15 processes). What I'd like to do is combine all the 'sample requests' for all sites into ONE scheduled task that will run them one after another thus cutting back on the number of scheduled tasks needed.
We're using ColdFusion to connect to a MySQL DB to gather all sample requests. First the app retrieves all the unflagged records from a remote db then begins looping through all the returned records. On the each loop, the app 'scrubs' the data by properly formatting phone numbers, fixing address abbreviations, etc. Next the app saves the scrubbed data to a local MS SQL table then starts the loop over on the next row. Lastly the app sends out an email saying it has completed successfully.
What I'm trying to do is Create a New Parent App that will run as a scheduled task to do the following:
- New Parent App Runs as Scheduled Task and calls/includes first of X sample request app files
- New Parent App runs first sample request app as described above (which can take up to a minute to process)
- Parent app waits until after first sample request app completes, then Parent App goes on to second sample request app, etc.
- After all sample requests are complete New App sends completion email with date and time
The problem I'm having is getting the scheduled task to wait for apppage1.cfm to finish before loading apppage2.cfm and so on. Can you give me a simple codeset that accomplishes this?
I've attached a sample of the include page the needs to complete before moving on!

Our approach is a bit more comprehensive.
First, we (meaning my co-workers) wrote a custom tag that does something like this:
<cftry>
<cfinclude the template>
<cfcatch>
log any errors
Then our actual scheduled job go like this:
set a really long timeout (and none of the actual jobs can have their own timeout)
set some variables
use the custom tag for each job we want to run
send mail if any errors occurred.

Calling multiple smartforms in a single driver program.

Hi ,
Can anybody tell me how can I call multiple smartforms in a single driver program.
Each form has been assigned a output type.
Regards,
Sudha.V

Hi,
Here i have 2 smartforms assigned to different OUTPUT TYPES
Use this way
IF nast-kschl = 'FUCI' .
    ci_form = 'ZLAYOUT'.
ELSEIF nast-kschl = 'RD04'.
    ci_form = 'ZLAYOUT01'.
ENDIF.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = ci_form
    IMPORTING
      fm_name            = fnam
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
AFter this call the smartforms based on the output type
Please closeif solved,
Thanks,
Aditya
Edited by: aditya on May 21, 2008 6:15 PM

Smartforms:Can i call a Tcod from Driver Prg 4 its o/p 2 be appended

Hello Smartform Gurus
I need 2 call 1 tcode from my Driver prog ,which has report o/p that is 2 be appended in my Smartform o/p as a
appended page .
Is it possible at all ?
plz throw some light on this .
thnx
Moni

Hi Moni,
of course there are several ways to reach your goal.
I have assumed:
- your smartform is based on a SAP-document
- document output is based on standard output determination with output messages
This is defined in customizing (SPRO) at several places or combined in NACE.
Anyway, create additional output just after smartform output, take care of same printer, spool name and so on -> you will end with one (combined) spool request.
Have a look for output messages, if you are unsure how to get a 'simple' smartform output.
Regards,
Christian

How can i call a zreport from my bsp page.

Hi friends,
How can i call a zreport from my bsp page.
Moosa

Hi Friend,
These are the codings to be wirtten in BSP for transferring values to the REPORT
DATA:wf_date TYPE ztable-ID.
      data:seltab type standard table of rsparams,
       wa_seltab like line of seltab,
     event TYPE REF TO if_htmlb_data.
DATA:p_value TYPE REF TO CL_HTMLB_INPUTFIELD.
event = cl_htmlb_manager=>get_event( runtime->server->request ).
p_requ ?= CL_HTMLB_MANAGER=>GET_DATA(
                                        request = runtime->server->request
                                        name     = 'inputField'
                                        id       = 'i1'
if p_requ is not initial.
wf_date = p_requ->value.
endif.
clear wa_seltab.
if wf_date is not initial.
wa_seltab-selname = 'P_REQU'.
wa_seltab-kind = 'P'.
wa_seltab-option = 'EQ'.
wa_seltab-low = wf_date.
append wa_seltab to seltab.
endif.
submit *ZSAMPLEAP1* with selection-table seltab AND RETURN .(ZSAMPLEAP1 refers to the report name and AND RETURN for coming back to the BSP page after the completion of its operation in Report )
IMPORT int_name TO int_name FROM MEMORY ID '*zid*'.(For importing the obtained value from Report)
In Report
REPORT ZSAMPLEAP1.
SELECT-OPTIONS: p_requ FOR ztable-id NO INTERVALS.
SELECT SINGLE name from ztable into int_name WHERE id = p_requ-low.
WRITE:int_name.
    EXPORT int_name TO MEMORY ID 'zsharmila'.
With Regards,
SHARMILA BRINDHA.M

Call multiple screens from LSMw

Hi
i want to call multiple screens from lsmw
I need to call a three transaction from LSMW wich are subzequent steps for data entry.
1) first tcode to be called is eprodcust which creates some master data and using this master data and some fields of data creatd i need to call two more tcodes first iq01 to create meter and save then eg31 tcod to feed data.
Please suggest where in lsmw can i give options for suc hscnerio and call of subsequent screens.
regards
Edited by: Prieti_V on Nov 8, 2011 8:28 PM

Hi Priti ,
we have few options to handle such cases , to avoid Locked Problems what you can do is
-->write BDC program within LSMW to create installation ( this will be created within step of 11 Convert Data ).
-->Based on the above BDC results ,run another BDC within LSMW to create Device.( this will be created within step of 11 Convert Data ).
-->third BDC records , let SAP do it thru LSMW or can you do it convert data step itself.
this approch needs lots of codes , so in worst case and if you dont want to break the loadings the follow this.
*Better to find any BAPI which will do creation of installation ,devices
regards
Prabhu

RE: Accessing multiple Env from single Client-PC

Look in the "System Management Guide" under connected environments page
72. This will allow services in your primary environment to find
services in your connected environment. However, there is a bug
reported on this feature which is fixed in 2F4 for the HP and H1 for all
other servers. The following is from Forte:
The connected environments bug that was fixed in 2F4 is #24282. The
problem
was in the nodemgr/name server source code and caused the following to
occur:
Service1 is in connected envs A and B.
Client has env A as primary, B as secondary.
Envmgr A dies before the client has ever made a call to Service1.
Afer env A is gone, client makes a call to Service1 which causes Envmgr
B to
seg fault.
You should upgrade your node manager/env manager nodes to 2F4. The 2F2
development and runtime clients are fully compatible with 2F4 servers.
Kal Inman
Andersen Windows
From: Inho Choi[SMTP:[email protected]]
Sent: Monday, April 21, 1997 2:04 AM
To: [email protected]
Subject: Accessing multiple Env from single Client-PC
Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

Look in the "System Management Guide" under connected environments page
72. This will allow services in your primary environment to find
services in your connected environment. However, there is a bug
reported on this feature which is fixed in 2F4 for the HP and H1 for all
other servers. The following is from Forte:
The connected environments bug that was fixed in 2F4 is #24282. The
problem
was in the nodemgr/name server source code and caused the following to
occur:
Service1 is in connected envs A and B.
Client has env A as primary, B as secondary.
Envmgr A dies before the client has ever made a call to Service1.
Afer env A is gone, client makes a call to Service1 which causes Envmgr
B to
seg fault.
You should upgrade your node manager/env manager nodes to 2F4. The 2F2
development and runtime clients are fully compatible with 2F4 servers.
Kal Inman
Andersen Windows
From: Inho Choi[SMTP:[email protected]]
Sent: Monday, April 21, 1997 2:04 AM
To: [email protected]
Subject: Accessing multiple Env from single Client-PC
Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?

Can we create multiple application with single MSI(or Same MSI) in biztalk admin console ?
My client requirement is process 100 files from biztalk with in 5 min ,actually it is taking 20 min .
So I decided to created same instance of the application with multiple time in BTS admin console ,as I understand biztalk admin console never allow to install same
schema’s with multiple time .
Any help can be appreciate ..

BizTalk will automatically process multiple messages on separate threads so you may need to tune your system. The following link should get you started:
http://social.technet.microsoft.com/wiki/contents/articles/7801.biztalk-server-performance-tuning-optimization.aspx
Another possibility is to set the Batch Size property on your receive location if the adapter uses batch size to determine how messages are picked up. As an example, it you want the MSMQ adapter to immediately pick up messages and start
to process them, set the batch size to 1.
You may also need to distribute the processing across multiple BizTalk servers by installing BizTalk on additional servers and joining the existing BizTalk group.
David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.

Can LabVIEW call a function from a .sys file or is LabVIEW limited to dll access?

My vendor has sent me a .sys file with functions accessing their hardware. Can i call these function from labview directly or do I have to wrapper the .sys with a dll?

Well a sys file is a kernel device driver. LabVIEW does not have any direct way of accessing such a driver. The way kernel drivers are accessed is usually through a DLL which makes calls to WinAPI functions such as CreateFile(), ReadFile(), WriteFile(), CloseHandle() and DeviceIORequest(). Since these WinAPI calls are basically just DLL calls too, you could theoretically use the Call Library Node to call them and access the kernel device driver in such a way.
However for any kernel device driver with more than one or two device driver calls, it will certainly be easier in terms of development, debugging and maintenance of the code, to write actually a dedicated DLL in C/C++ for this device driver and access that DLL from LabVIEW, especially if you consider the LabVIEW datatype limitations when designing the DLL interface (Basically this same DLL can then be called from any other Windows development environment, be it Visual Basic (similar datatype limitation as LabVIEW), Delphi, (Visual) C, LabVIEW or also various scripting environments like Python and Lua.
Some of the necessary WindAPI calls are rather involved and pose quite a bit of trouble to get the parameter data right in LabVIEw.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Multiple Hierarchies from Single Dimension Table in OBIEE-11g?

Is it possible to have Multiple Hierarchies from Single Dimension Table in OBIEE-11g?
Like 1)Year-Qtr-Month-Weeks 2)Year-Month-Days

Hi,
or if your lowest level is the same like
Day->month->year->Total
Day->businessMonth->businessyear->Total
Then yes, it is.
Create the first, then you start to create the second by adding your top(business year) level on the same level as the one you have (year) both under your total.
Then when you would add your second base level, there is a special option for it, something like use other hierarchy level/shared level (sorry can't recall and does not have a connection right now) then you select your existing day level under your businessmonth level.
Hope this helps,
Regards,
D

Can we call java jar from ODI?

Hi All,
Can we call java jar from ODI? if yes please suggest how?
Regards,
Satish

This is an excellent article from Uli.
One reason, I dont like this approach is that is mandates to copy the .jar file to the driver folder and restart the agent.
Think of a scenario where there are several developers in love with Java and want to place the jars in the drivers directory.
This is a maintenance nightmare for the admin and would clutter up the drivers directory.
Find here the way to invoke Java jar methods
http://askankit.blogspot.com/2010/09/call-java-jar-methods-from-odi.html

Mask multiple movieclips from single mask

Hi,
h have big movieclip 450X350 and there are many small thumbnails i need to mask those from big movieclip, I need to animate those so that i can't put those in a single movieclip, Is it possible to mask multiple movieclips from single movieclip...?

If you want to mask them using Actionscript then you should be able to place them inside a movieclip/sprite as separate animations/movieclips and then assign the mask to the container.
You can mask multiple layers under one layer if you use the timeline

How can i send multiple sms from my iphone 4

how can i send multiple sms from my i phone 4

Turn Group Messaging (instructions in lin that follows) off and send the message to multiple recipients. The result may be dependent on your carrier. If manually keying in numbers rather than using contacts, use the return key after each number. http://support.apple.com/kb/HT5760

How can i call a servlet from a servlet ?

Hello,
Can i call a Servlet from within a Servlet ?
and is it "right thing" to Do ?
Thanks

JMO, but I wouldn't do it like this.
Don't have a remote object like a servlet doing database queries for your app. That will mean TWO network hops for every query if the database resides on another machine. The network is the biggest bottleneck you've got.
Write a JavaBean that does the database stuff for you and just have the first servlet instantiate it when it needs it. A Bean has a better chance of being reused, too. Write a TableGateway or DAO for your object.
Or write an EJB to do it.
The only time I've done a servlet-to-servlet connection like that was for one servlet running in a DMZ that would authenticate a user and then forward the request to another servlet running inside the second firewall.
I wouldn't encapsulate database query logic in a servlet like that. JMO - MOD

Can we call multiple Smartforms from single Driver Prog?

Similar Messages

Maybe you are looking for