Can we configure MDS in an ADF library?

Hi,
The goal is that we configure MDS (runtime user customization specifically) in a common ViewController project and export it as an ADF library. So that all the consuming projects will inherit the MDS configuration without the need to configure MDS for each of them. Is this supported or doable? Thanks.
Oracle JDeveloper 11g Release 2

Hi
To send a PDF through mail you don't really need workflows configured.
This will solve your problem ( 8th page in the following PDF )
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c2567f2b-0b01-0010-b7b5-977cbf80665d
If you want a process to take place you need to use Workflows
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/d0731bbc-810b-2a10-7fb8-900f16fd3c7d
Abhi

Similar Messages

  • Can I restore all my original itunes library configuration from a back up?

    Can I restore all my original itunes library & playlists' configuration from a back up?
    hi...has anyone out there had this happen/done this?
    1. I just got a new PC as my old one finally fried on me.
    2. I installed the latest iTunes again on the new PC and
    3. I have all my itunes songs and the itunes library file backed up and I restored those files to their original locations (these exactly match the same locations on my new PC).
    Problem: my original itunes library shows up fine in itunes, but none of the songs can be found when I try to play any of them - 'the original file could not be found' is the error message that comes up.
    I have about 5,000 tracks, with many organized into playlists, and I don't want to have to start from scratch organizing this huge library again. I thought backups and the ability to restore files prevents problems like these.
    If anyone has a workaround or fix, I would love to hear about it. Thanks.

    check out this post by Zevoneer.
    JGG

  • Can not configure Oracle 10g form  on oracle 11g client

    Hi
    I need to install oracle 10g form in my system .
    Here is my system
    1. OS --XP
    2. 32 Bit
    4. Already oracle 11g release client installed ( I think that create the problem )
    I tried to install oracle 10g form , it installed but can cont configure net manager for it , Always it point to 11g client and hence I could not configure .
    Also I tried install Oracle Forms first then 11g client , But  I got same issue .
    I think if  I created multiplr home one for 11g client and other for forms , it may work out .
    Please  help me
    Debashis

    While deploying the example 'VacationRequest' in the oracle complete guide for 11g, i got an exception like this
    "12:08:15 PM] Deploying Application...
    [12:11:16 PM] [Deployer:149191]Operation 'deploy' on application 'VacationRequestTaskFlow' is initializing on 'soa_server1'
    [12:11:24 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application VacationRequestTaskFlow on soa_server1.: [Deployer:149145]Unable to contact 'bam_server1'. Deployment is deferred until 'bam_server1' becomes available.; nested exception is:
         java.rmi.UnknownHostException: Could not discover administration URL for server 'bam_server1'.
    [12:11:24 PM] [Deployer:149193]Operation 'deploy' on application 'VacationRequestTaskFlow' has failed on 'soa_server1'
    [12:11:24 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application VacationRequestTaskFlow on soa_server1.: Failed to load webapp: 'VacationRequestTaskFlow.war'.
    [12:11:24 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: 'VacationRequestTaskFlow.war'
    [12:11:24 PM] Caused by: java.lang.ClassNotFoundException: oracle.adf.library.webapp.ResourceServlet
    [12:11:24 PM] See server logs or server console for more details.
    [12:11:24 PM] weblogic.application.ModuleException: Failed to load webapp: 'VacationRequestTaskFlow.war'
    [12:11:24 PM] #### Deployment incomplete. ####
    [12:11:24 PM] Deployment Failed"
    Can anyone help in this.

  • How to consume data model adf library in view project?

    Hello,
    I am using Jdev 11.1.1.6.
    I have a Jdev workspace containing business component (entity objects, view objects and application module exposing the VOs). This workspace is deployed to an ADF Library. This library is packaged with DB connection details.
    I have another Jdev workspace that needs to consume this Data Model ADF Library. This workspace is basically just the view layer (no business components at all).
    I have added the Data Model ADF Library to it's view project and it is showing application module and VOs under Data Controls.
    My question is : How is this view project going to connect to DB at runtime?
    Can it use the connection from packaged Data Model ADF Libabry? If yes, how?
    or Do I need to create a business project under this view workspace, just for connection purpose? if yes then what is the use of including connections during ADF Library creation?
    Thanks,
    Jai

    Hi,
    it will use the connection in the ADF library. I recommend though that you not save database connect information in the ADF library. Instead:
    - define the ADF BC model to use JDBC data sources
    - In the ADF library, configure it to only contain the data source name
    - In the view project (the workspace) configure the database connection exposed by the library
    When the library is imported, check Application Resources --> Connections and right click on the imported connection name to configure it
    Frank

  • Mixing Security With ADF Library Feature

    While using ADF Library feature, what should be the way to implement security.
    For example, assume a project ProjectProducer having a task flow. I deploy ProjectProducer as an ADF library.
    ProjectConsumer
         |->     ProjectProducer (ADFLib JAR)
    Now, in another Workspace (or application), I have another project with name ProjectConsumer, and now I want to use the ProjectProducer's task flow in ProjectConsumer.
    Now, after making a connection, I add ProjectProducer library to ProjectConsumer
    Now assume that I need to implement security in ProjectConsumer project using jazn. Because of this, I might need to hide/show some columns of a table shown in the ProjectProducer task flow's first (default) view activity based on some role assignments.
    Can I do that by configuring security using jazn of ProjectConsumer project?
    How should I plan this?

    Hi,
    The pageDef in app B must have an entry for the method in order to access it. Just adding the adfjar isn't enough.
    You need to go the bindings of the page in app B and add the method you want to access. Once the method is added you can access using the following code:
    BindingContainer bindings = getBindings();
    OperationBinding operationBinding = bindings.getOperationBinding("getWeatherbyCityName");
    Map map =operationBinding.getParamsMap();
    map.put("theCityName", "Tokyo");
    operationBinding.execute();
    This should work.
    Thanks,
    Siddharth.

  • Right way to manage ADF Library Dependencies

    Hi,
    I am working on an application where we are trying to components in individual Libraries for re-usability and logical grouping.
    These jar files are then imported into parent projects which can result in different levels of dependency hierarchies.
    From what I have seen there are different ways of importing components / libraries onto a project.
    1. We can directly drag a component like Data control (from Data Control palette) from one project to a page on another (for example from a model project to a ui project)
    2. Deploy the model project as a ADF library jar, go to the resource palette, create a connection, right click on the library and do an add to project.
    3. From the resource palette, expand the library structure, locate the Data control and drag it onto the page of the parent project
    My question is:
    a> What is the difference between these three ways of importing components from one project to the other.
    b> Which is the best way for deployment and future maintenance.
    thanks
    Edited by: user595592 on Aug 12, 2011 5:18 AM

    1. We can directly drag a component like Data control (from Data Control palette) from one project to a page on another (for example from a model project to a ui project)This will be applicable if you have a dependiency.. ro you have an adf library reference for your project..
    datacontrol - Business components referenced in bc4j.cfg
    other datacontrlols will be defined in DataBindings.cpx file
    2. Deploy the model project as a ADF library jar, go to the resource palette, create a connection, right click on the library and do an add to project.This is through file connection.. This is the most prompt way of adding libraries.. to the project.. so that there wont be an absolute references..
    3. From the resource palette, expand the library structure, locate the Data control and drag it onto the page of the parent projectagain same as poiint 2.. but for datacontrol..
    a> What is the difference between these three ways of importing components from one project to the other. point 1 say dependecies.. in a single applicatioon between different project.. absoultely fine..
    point 2.. will alway go with relative path.. and have an advantage of not having absolute path..
    point 3. si same as 2
    b> Which is the best way for deployment and future maintenanceI will suggest you to go for 2.. as its the standard way of adding libraries..

  • How can I configure ReFS to NOT fail read operations when a checksum error is detected (on non-Storage-Spaces volumes where data integrity streams are enabled)?

    According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
        Integrity can be enabled when the system is not running on Storage Spaces. When
        integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
        fails the read operation by default. If you don’t want the read operation to fail, you
        can configure ReFS to continue with the read operation. A related event will be logged
        regardless.
    So then how do I configure it to do that???
    (And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
    with integrity streams enabled, via format E: /fs:ReFS /i:enabled
    For those who want more details, here's the situation: 
    I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
    And an event ID 133 from ReFSv1 gets logged in the System log:
    Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
    This is indeed the correct default behaviour.
    What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
    been able to find anything.

    Hi Tommy,
    >>How can I configure ReFS to NOT fail read operations when a checksum error is detected
    We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
    -Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.  
    Regarding this point, the following article can be referred to as reference.
    Set-FileIntegrity
    https://technet.microsoft.com/en-us/library/jj218351.aspx
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • JDeveloper 11.1.1.5.0 ADF Library task-flow not shown

    fyi
    Please consider the example application created using JDeveloper 11.1.1.5.0
    at http://www.consideringred.com/files/oracle/2011/TestsInADFLibraryApp-v0.01.zip
    (in the context of forum thread "JUnit test classes in ADF Library")
    At some point, working with that application in JDeveloper 11.1.1.5.0, I used the deployment profile "adflibTestsInADFLibraryApp-ViewController-dp" to create the ADF Library "adflibTestsInADFLibraryApp-ViewController.jar" wich seemed to have an issue.
    When in a File System Connection on the Resource Palette, that ADF Library did not show the task-flow(s) it contained.
    But, I can no longer reproduce this. If I now try to do the same, the ADF Library seems to be OK. The only thing I can think of that changed, is that JDeveloper has been restarted (a day later).
    Showing both ADF Libraries in File System Connections on the Resource Palette illustrates this
    at http://www.consideringred.com/files/oracle/img/2011/task-flow-not-shown-jdev111150.png
    When I looked inside the ADF Libraries, the respective "task-flow-registry.xml" files were somewhat different:
    - in the "broken" ADF Library there were lots of XML namespace declarations
    <?xml version="1.0" encoding="UTF-8" standalone="no"?>
    <task-flow-registry xmlns="http://xmlns.oracle.com/adf/controller/rc">
    <task-flow-descriptor xmlns:ns0="http://xmlns.oracle.com/adf/controller/rc" ns0:path="WEB-INF/btf/browse-employees-btf.xml" xmlns:ns1="http://xmlns.oracle.com/adf/controller/rc" ns1:id="browse-employees-btf" xmlns:ns2="http://xmlns.oracle.com/adf/controller/rc" ns2:type="task-flow-definition" xmlns:ns3="http://xmlns.oracle.com/adf/controller/rc" ns3:uses-page-fragments="true" xmlns:ns4="http://xmlns.oracle.com/adf/controller/rc" ns4:library-internal="false" xmlns:ns5="http://xmlns.oracle.com/adf/controller/rc" ns5:train="false"/>
    <task-flow-descriptor xmlns:ns0="http://xmlns.oracle.com/adf/controller/rc" ns0:path="META-INF/adfc-config.xml" xmlns:ns1="http://xmlns.oracle.com/adf/controller/rc" ns1:id="" xmlns:ns2="http://xmlns.oracle.com/adf/controller/rc" ns2:type="" xmlns:ns3="http://xmlns.oracle.com/adf/controller/rc" ns3:uses-page-fragments="false" xmlns:ns4="http://xmlns.oracle.com/adf/controller/rc" ns4:library-internal="false" xmlns:ns5="http://xmlns.oracle.com/adf/controller/rc" ns5:train="false"/>
    </task-flow-registry>- in the "ok" ADF Library there was only one XML namespace declaration
    <?xml version = '1.0' encoding = 'UTF-8'?>
    <task-flow-registry xmlns="http://xmlns.oracle.com/adf/controller/rc">
       <task-flow-descriptor path="WEB-INF/btf/browse-employees-btf.xml" id="browse-employees-btf" type="task-flow-definition" uses-page-fragments="true" library-internal="false" train="false"/>
       <task-flow-descriptor path="META-INF/adfc-config.xml" id="" type="" uses-page-fragments="false" library-internal="false" train="false"/>
    </task-flow-registry>- (q1) How can these not shown task-flows (or its different task-flow-registry.xml file) be explained?
    many thanks
    Jan Vervecken

    Thanks for your reply Chris.
    Chris Muir wrote:
    a) When you say you've "used the deployment profile" I'm guessing you mean within JDeveloper and not via ojdeploy? ...That is correct.
    ... it seems you're doing the ADF Library generation inside JDev, not via ojdeploy via Ant correct? ...That is correct.
    ... (For reference the bug numbers are 10028879, 10028816, 913159). ...On My Oracle Support I have found:
    - bug 10028879, "OJDEPLOY FAILS TO COMPILE/GENERATE TASK-FLOW-REGISTRY.XML WHEN ${USER.DIR} USED" (having "Base Bug 10076058" which does not seem to be published)
    - bug 10028816, "OJDEPLOY FAILS TO GENERATE TASK-FLOW-REGISTRY.XML FOR CASE-INSENSITIVE WIN PATH" (and a patch)
    - for number 913159 I got "No results found" (which might be an unpublished bug, or a wrong number)
    ... by that stage I was sick of logging bugs against ojdeploy. ...Really, where did it hurt. ;-) ... logging bugs should not be a problem ...
    b) Regards the File System Connection in the Resource Palette, are you using an UNC mapping? ...No UNC mapping, just the local file system.
    ... The relating bug numbers are 9340973 and 12940696. ...On My Oracle Support I have found:
    - bug 9340973, "RESOURCE PALETTE FAILURE ON USING NETWORK PATHED FILE CONNECTIONS" (having "Base Bug 12940696" which does not seem to be published)
    - for number 12940696 I got "No results found" (which might be an unpublished bug, or a wrong number)
    So, about "I don't think these are related but let's rule them out", I think those are ruled out.
    regards
    Jan

  • Java.lang.ClassNotFoundException: oracle.adf.library.webapp.ResourceServlet

    I use Jdev 11.1.1.5 to create a BPM process application which contains a process with 3 interactive activities.
    Each interacitive acitivity has a form project. I can deply these projects to a domain. Then, I delete them. However, after that, I cannot deploy them.
    I try to create a new SOA domain. However, I get same error message as follow.
    [04:04:48 PM] ---- Deployment started. ----
    [04:04:48 PM] Target platform is (Weblogic 10.3).
    [04:04:48 PM] Retrieving existing application information
    [04:04:48 PM] Running dependency analysis...
    [04:04:48 PM] Building...
    [04:05:14 PM] Deploying profile...
    [04:05:17 PM] Wrote Web Application Module to C:\JdevWorkspace\BPM\initiatorUI\deploy\initiatorUI.war
    [04:05:19 PM] Deploying Application...
    [04:05:24 PM] [Deployer:149193]Operation 'deploy' on application 'initiatorUI' has failed on 'AdminServer'
    [04:05:24 PM] [Deployer:149193]Operation 'deploy' on application 'initiatorUI' has failed on 'AdminServer'
    [04:05:24 PM] [Deployer:149193]Operation 'deploy' on application 'initiatorUI' has failed on 'AdminServer'
    [04:05:24 PM] [Deployer:149193]Operation 'deploy' on application 'initiatorUI' has failed on 'AdminServer'
    [04:05:24 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application initiatorUI on AdminServer,BPMJMSServer,SOAJMSServer,UMSJMSServer.: Failed to load webapp: 'initiatorUI.war'.
    [04:05:24 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: 'initiatorUI.war'
    [04:05:24 PM] Caused by: java.lang.ClassNotFoundException: oracle.adf.library.webapp.ResourceServlet
    [04:05:24 PM] See server logs or server console for more details.
    [04:05:24 PM] weblogic.application.ModuleException: Failed to load webapp: 'initiatorUI.war'
    [04:05:24 PM] #### Deployment incomplete. ####
    [04:05:24 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

    Thanks Amjad. It worked for me as well!!
    I think the reasoning behind this is: If we deploy it from the Application tab, it deploys the EAR file whereas simply right clicking the project and deploy, deploys the WAR file.

  • UI Shell - how to allow ADF Library Bounded Task Flow to close itself

    Hi Richard
    Further to my other post, we're having lots of fun with the UI Shell, it's making mockups very easy.
    Question for you though based around the functionality defined in the UI Shell whitepaper. Say we've created our UI Shell application, and rather than wanting to create the bounded task flows in the app (ie.first, second, third), we create them as standalone bounded task flows deployed to ADF Libraries, and imported into our app separately.
    In the UI Shell examples bounded task flows are opened & closed via the UI Shell's own components (say the navigation page items or toolbar buttons), that call the methods in the Launcher bean (_launchActivity & closeCurrentActivity). It's fairly simple to rewrite the launcher helper methods in the launcher bean to call an imported ADF Library bounded task flow to open it as an activity, just referencing the correct task-flow.xml file.
    However as you know a bounded task flow has a "Default Activity" entry point and one or more "Task Flow Return" exit points. What I haven't been able to work out is how when the bounded task flow exits via a task flow return, can we call the closeCurrentActivity method in the Launcher bean? The UI Shell code examples demonstrate closing a bounded task flow by menu options/or similar outside the bounded task flow in the UI Shell, but it would seem reasonable if the bounded task flow exited via a "Task Flow Return" we should be also able to close the activity tab too.
    (....and as extension, before we even do that potentially call the checkState/isDirty() method to stop the user closing the activity too, but again driven by the bounded task flow attempting to exit).
    I could imagine inserting code into the bounded task flow finalizer to close the activity tab, but this pushes the UI Shell tab activity management logic into our standalone ADF Library bounded task flows which isn't ideal, especially if we want to later reuse them in another app which doesn't use the UI Shell.
    Any suggestions welcome.
    Thanks & regards,
    CM.

    And we're back again.... what's a couple months between friends?
    So it turns out after testing our app (d@mn, so close) that we've hit a bug with this approach.
    Our current app allows one BTF to be open in the UI Shell at any one time. Our menu options automatically open one BTF at a time by the user (max one open), and close the previous BTF. However we have some "special" BTFs that require the user to explicitly close the BTF, which in turn makes use of the regionNavigationListener solution I described earlier in this post.
    However we discovered a bug when we do a complete cycle of the 15 embedded regions within the UI Shell.
    Say we:
    1) Open a normal BTF in region 0
    2) Open another normal BTF in region 1 (our solution automatically closes the previous BTF)
    3) We then open another BTF (again the previous BTF is closed) in region 2, yet this a "special" BTF requiring the user explicitly to close it. Upon the user closing the BTF - this results in the regionNavigationListener being called and the removeTab() method called to close down the BTF in the UI Shell
    4) The user then open/closes multiple normal BTFs, one by one, rotating through regions 3, 4, 5 .... eventually back to 1 again
    5) Then the bug occurs - on opening any BTF back in region 2 (as part of the complete cycle of all regions), the tab for the region 2 opens, correct title, and via debugging the Tab.class has all the right settings including taskFlowId, but the tab is incorrectly empty
    doh!
    I've managed to track a symptom of the problem down that may explain what's happening.
    Each time a tab is rendered with a BTF, the Tab classes getBinding() method returns a reference to the binding required for the current BTF. However for some reason on the complete cycle, for "r2" it returns the binding for the previously user-closed BTF from step 3 above, even though we called the TabContext.removeTab() method.
    What I haven't been able to work out is how the bindings get turned on/off dynamically for each BTF being invoked. Presumably for some reason on step 3, the BTF's bindings aren't being correctly removed from r2 even though we called TabContext.removeTab().
    If anybody has any brain waves about what's going on and how to fix this problem, your help appreciated.
    Regards,
    CM.

  • ADF Library problem...

    Hi all,
    I hope someone can help me with this. I'm using JDeveloper 11.1.1.2
    I have an application with three projects, two models and a view controller,
    I have business components (Entity Objects) in the first model project deployed to an ADF library which i added to the second model project by creating a new file connection referencing the jar file. This initially worked fine, and in the second model project, I was able to create view objects using the entity object referenced from the ADF library jar file, with LOV's also referencing view objects which are in the ADF library jar file.
    Once I exit jdeveloper and restart however, any attempt to open the view object xml file in the second model project results in the following errors
    Feb 8, 2010 6:40:22 PM oracle.adfmdt.log
    WARNING: JboObject is null forjar:file:/C:/Work/deploy/cBCModelLib.jar!/company/test/model/view/lov/LocationsLVO.xmland
    Feb 8, 2010 6:40:22 PM oracle.jbo.dt.dependency.xdf.Utils getJboBaseObject
    WARNING: JboObject is null forjar:file:/C:/Work/deploy/cBCModelLib.jar!/company/test/model/view/lov/LocationsLVO.xmlWhich are repeated multiple times in the log at the point of opening the xml file (design time, not at run time) and the entity object can no longer be referenced.
    It's as if jdeveloper "forgets" the ADF library reference once the IDE is closed.
    I looked in the Jar file, and all the objects are actually there. the model.jpx files in all the projects are named differently so there is no conflict there. I have tried multiple ways of adding the ADF library
    From the IDE connections
    From project properties->business components-> import
    From model.jpx properties-> import
    From file menu->import
    and as soon as you reload the ide... all the references to objects in the jar file stop working
    Has this happened to anyone else? Is there a solution to this?
    Thanks

    Found it...
    My Mistake.
    I had created the view object in a package that was used by objects in the ADF library, apparently that's not right. Once a package is used in an ADF library, a consuming project is should not (though nothing stops you, and the error message is not very informative) create objects in the same package. It might help if an warning was raised as soon as the view object was created.
    Thanks

  • Oracle SOA with ADF library

    Hi,
    I am learning Oracle SOA with ADF as mentioned in the below URL:-
    http://www.oracle.com/technetwork/developer-tools/jdev/index-095536.html
    I want to know what is .jws,.jpr,.jpx files? Whether these are autogenerated files from JDeveloper? What is the purpose of these files? which is not clearly mentioned in the site.
    1) What I found is like, i have "n" number of composite services in "CompositeService" folder with a common .jws file which will hold the configuration (.jpr) of the other composie services, by doing so it does integrate all the services into a single cohesive unit?
    2) There is a "infrastructure" folder which does have .jws with the DB Schema which is commonly used by the composite services? This infrastructure will be referenced in the individual composite services to communicate with the DB?
    3) While deploying it in Oracle WL server, we will create a single .WAR for these composite services and will be deplyed?
    4) The packages javax.xml.ws (for webservices) all these are part of ADF library?
    5) I found that BPEL is the one which orchestrate the services, which is a XML file which will be similalr to common .jws which holds the config for all the composite services? Where exactly it comes to the picture?
    6) Simarly where exactly the SCA and SDO comes to the picture?
    Please clarify in respect to the application, which will be of great help.
    Thanks in advance.

    Guys, no replies. Please respond. Thanks in advance.

  • Can't configure deployed WebCenter app using Enterprise Manager after WLST

    Using fusion middleware version 11.1.1.4 with WLS and WebCenter of same versions.
    I deployed an ADF application using WLST and the application mostly runs, but I need to configure some portal connections from the Enterprise Manager. I am able to configure many options but when I try to select an option under WebCenter I get:
    "You do not have permission to view this page. Contact your administrator"
    I get this message for any deployed application even those I didn't deploy using WLST and I was able to configure them fine before this.
    I am logged as the Weblogic administrator.
    For the deployment using WLST, I connected to the admin server, deployed successfully and last issues exit().
    I tried to shutdown the Managed server but took more than 5 minutes (which is not common) so I killed the process and restarted it. Was able to run the application but still can't configure the WebCenter options for any application???
    Please advise how to get out of this stuck issue!!
    Thanks

    Solved, seems browser caching. Opened a new browser and it worked !! (seems weird)
    Thanks

  • UI Shell with BTF from ADF library issue

    I've created an application component (Bounded Task Flow) wrapped in an ADF library for reuse. I am able to import this into "normal" ADF applications and place it on a page as a Region. Works as expected and looks good.
    I'm attempting to add this to a page based on the UIShell template and am getting an exception on startup:
    java.lang.IllegalStateException: The expression "#{bindings.emmain1.regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "r1") evaluated to null.
    This is typically due to an error in the configuration of the objects referenced by this expression.
    If it helps, the expression "#{bindings.emmain1}" evaluates to "null".
    If it helps, the expression "#{bindings}" evaluates to "oracle_demo_uist3_view_view1PageDef". Now using an empty RegionModel instead.
         at oracle.adf.view.rich.component.fragment.UIXRegion.getRegionModel(UIXRegion.java:439)
         at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:109)
         at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:50)
    <lots more>
    The designer shows the UI as expected so I'm assuming something is not configured correctly for runtime (duh!), but I cannot figure out what it is.
    I've tried referencing the task flow directly from the navigation bean and wrapping the external BTF in a local BTF and navigating to that. Neither works.
    Any help would be greatly appreciated.
    Thanks,
    Gene

    Change the launcher bean to call the imported ADF Library bounded task flow to open it as an activity within one of the dynamic tabs. This is done by referencing the correct task-flow.xml file.

  • Using skin from adf library

    Hi all,
    I'm using JDeveloper 11.1.2.1.
    Is there a way to use different skins in imported application as adf lib from main application?
    For example, when I go to views from main application it will use its own skin, but when I go to views from imported adf library I want it to use skin imported with adf lib.
    Thanks in advance.

    Hi,
    at runtime you can switch easily. At design time you need to have the skin in the project to show it in JDeveloper. Here skins in ADF library don't work
    Frank

Maybe you are looking for