Can we debug the Workflow ?

Hi All,
I have created a method in the BO, it is working fine when i tested that BO. then i call that method in an activity step with required parameters, but that didnot work.
Then i tested that Task that i used in that Activity step using SWUD transaction, that task is also working fine. It is giving the desired output. Then i checked the binding of the workflow, it seems to be fine, but still i created it again, but still when i am executing workflow, values are not coming into Workflow container.
Is there any way to debug the workflow ?
how can i know that where is the issue ?
Regards,
Raman.

Check the binding between event and workflow container...
Regarding the debugging..please search the forum...
Already discussed in lot of threads..
Edited by: Swaminathan PJ on Jan 21, 2010 4:09 PM

Similar Messages

How can we Debug the workflow?

Hi,
How can we debug the workflow?
Please help me on debugging the workflow in step by step procedure?
Early reply is highely appriciable.
Regards,
Chow.

Hi,
If you want to set breakpoints in method which is used in workflow task then it is possible
till ECC5 am afraid about ECC6
you can see the graphical view of workflow through transactions said by Kalpesh
you can also use swwl (delete workflow) for viewing the container elements of the workflow.
SWI2_ADM1:Workitem without agents
SWI2_DIAG:Workflow with error
these transactions are also helpful
Thanks & Regards
Hari Sankar M

Can we debug a workflow

Hi All,
I wish to know can we debug a workflow. If yes then how?
Also if i want to know how the flow is going for the business process in question. I mean if it is stuck some where, then what is the way for it?
Thanks in advance.
Regards,
Neha

Hi Neha,
Yes you can debug the WF to check the LOG in terms of Graphical Display and Technical details..!!
Use the following transaction:-
1> SWE4/SWELS -> EVENT TRACE ON/OFF (Switch On the Event Trace)
2> SWEL -> DISPLAY EVENT TRACE
3> SWUD -> WF DIAGNOSTICS
4> SWPR -> WORKFLOW RESTART AFTER ERROR
Enter the WF Number and Click on the LOG Icon.
There you can see the Graphical Log of the WF to know where the WF is stuck.
And You can also check the Technical Details of the WF there, to find which WF Container has what value.
Let me know if you need any help on this.
Regards,
Kanika

How to debug the workflow

dear friends,
please tell me how to debug the workflow, if you have time then you just see the workflow WS99900212 . in this i have done Leave Approver Notification . but i want to debug on that how to flow step by step .
please you tell me on same workflow , where i am going to take breakpoint.
Thanks in Advance for help.
Cheers.
Puneet.

You can try first of all to enable more logging. (I assume you are running release ERP 2005 since you are not saying what your release is.)
In the workflow builder, select menu item "Goto", "Basic data"
Select the "Version-dependent (current workflow version)" tab
Select the "Control" tab within the version-dependent subscreen
Select the "Performance optimization" tab within the control subscreen
Change the "Settings" drop-down value to "No restrictions on logging".
That will give you much more information in the workflow log. The description of this choice says "All the messages are logged. All runtime operations can be traced." As also noted: don't keep this setting in a production system.

Can we debug the Html template in Internet service

Hi ,
I need to change the name of a filed in srm portal "confirmation of good and service" for that i had a template but i am not able to find the label in that
How can i find the label ?
can i debug the template
help me
thanks
Channappa Sajjanar

Hi Pradeep,
Thanks for reply .Actually i found one solution which is as follow just guide me is it correct or not?
I gone to the screenpainter (se51) their i given the
program name =SAPLBBP_PDH_SEARCH.
screen number = 3001.
in this screen only the speeling mistakes are found for the variable's
Confirmatn Value : BBPS_SEARCH_SUBLIST_PO_WEB-VAL_CF and
Calculatd : BBPS_SEARCH_SUBLIST_PO_WEB-QUAN_IV.
So i just changed the spelling mistakes there in IDES SRM and they are reflection when i exceute the t-code BBPCF02 in SE80.
now just tell me is the way i am going is correct or not ?
what are the side effetcts of this?
and is any way i can solve the proble from the template?
please give your valuable sugetions i am very new to SRM.
Regards
Channappa Sajjanar

Can we debug the USER EXITs

Hi,
This is Krishna. Can we Debug the User exits. If possible, how to debug and what r the user exits can we debug.
If any one knows, pls help me.
Thanx in advance.
Regards,
Krishna.

Hi,
Write one of these statements in ur user exit code.
break-point
or
break <URID>
Thanks
mahesh

Can we debug the package pa_project_pvt.add_class_categories which is called in Pa_project_pub.create_project?

We are trying to create a project using the api code pa_project_pub.create_project. But we are unable to create due to some unexpected error status flag when pa_project_pvt.add_class_categories is executed. We tried by going through the code but it was in vain.
So couple of questions from our side.
1) Can we debug the package procedure pa_project_pvt.add_class_categories by any chance?
2) If yes, then what is the debugging process?
Any help in this regard would be helpful.
Thanks in advance.

Hi,
you may try to enable debugging via Sysadmin responsibility by setting following profile options, either for a certain user (preferred) or a certain responsibility:
- "FND: Debug Log Enabled" set it to yes
- "FND: Debug Log Level" set it to 1 (but only temporarily, as it generates lots of loggings)
- "FND: Debug Log Module" set it to "pa" or "PA"
You'll have to log off and login to apps again for the profile options to come into effect.
Before you start your process, have a look at fnd_log_messages table (write down last value LOG_SEQUENCE,
so you can identify the loggings for your process easier) by filtering column log_sequence, module and user_id
(which is the user_id coming from fnd_user table).
Make sure that you set apps context (fnd_global.apps_initialize) correctly before the logic of your api call starts.
Regards.

■■I can't debug the xml_xslt_content EJB sample in the examplesWebApp !!

■■I can't debug the xml_xslt_content EJB sample in the examplesWebApp
start the Example Server
http://localhost:7001/console
among the deployed EJB ,the xml_xslt_content EJB how to run
Is the related jsp page in \bea\wlserver6.0\samples\examples\xml\xslt ?????
in the
\bea\wlserver6.0\config\examples\applications\examplesWebApp\WEB-INF\web.xml
there are
<taglib-location>
/WEB-INF/lib/xmlx-tags.jar
</taglib-location>
</taglib>
in line471
but i did not find the xmlx-tags.jar
in the \bea\wlserver6.0
who can help me ??????????

As this is your 3rd post on this subject, Please tell us what the problem is, I did reply to both your 1st and 2nd post, and whilst I agree that my 1st post did not give an adequate reply (I misunderstood the problem), I think my second reply was adequate and I did offer to help further if you had problems, (please remember that I have to work as well as trying to help other users on the forum).
My 2nd reply was as follows:
If you wish to use the IIS server then go to: http://www.microsoft.com/Web/
and download the Microsoft web platform.
This 2nd option here is best if you are using php or are a beginner -
If you wish to use an apache server try: http://httpd.apache.org/download.cgi
or for a fuller installation (server/mysql/php)
http://www.wampserver.com/en/download.php
Don't forget to get the documentation as well!
HTH
PZ
Once you have one of these working (or have a problem with), then please return.
Message was edited by: pziecina
If there is anything you do not understand, or require help with please reply to the original post, but as David Powers says any abusive language will prevent me (and others), from replying (I did not see the previous moderated post).
PZ

Urgently!!!I can't debug the xml_xslt_content EJB sample in the examplesWebApp !!

I can't debug the xml_xslt_content EJB sample in the examplesWebApp !!
start the Example Server
http://localhost:7001/console
among the deployed EJB ,the xml_xslt_content EJB how to run
Is the related jsp page in \bea\wlserver6.0\samples\examples\xml\xslt ?????
in the
\bea\wlserver6.0\config\examples\applications\examplesWebApp\WEB-INF\web.xml
there are
<taglib-location>
/WEB-INF/lib/xmlx-tags.jar
</taglib-location>
</taglib>
in line471
but i did not find the xmlx-tags.jar
in the \bea\wlserver6.0
who can help me ??????????

As this is your 3rd post on this subject, Please tell us what the problem is, I did reply to both your 1st and 2nd post, and whilst I agree that my 1st post did not give an adequate reply (I misunderstood the problem), I think my second reply was adequate and I did offer to help further if you had problems, (please remember that I have to work as well as trying to help other users on the forum).
My 2nd reply was as follows:
If you wish to use the IIS server then go to: http://www.microsoft.com/Web/
and download the Microsoft web platform.
This 2nd option here is best if you are using php or are a beginner -
If you wish to use an apache server try: http://httpd.apache.org/download.cgi
or for a fuller installation (server/mysql/php)
http://www.wampserver.com/en/download.php
Don't forget to get the documentation as well!
HTH
PZ
Once you have one of these working (or have a problem with), then please return.
Message was edited by: pziecina
If there is anything you do not understand, or require help with please reply to the original post, but as David Powers says any abusive language will prevent me (and others), from replying (I did not see the previous moderated post).
PZ

Can we debug the RFID programs ?

Hello All,
This is Rajani.
I am working on a support project.
I have a doubt. Can we debug the RFID programs ?

Hi Rajani. Debug of RFID programs is possible. For your custom written code you can use the following code.
start of code for debugging ***
   data: wf_break type i.
    while wf_break is initial.
    endwhile.
end of code for debugging ***
You run the AII test tool to send tag information to AII. Then once the process starts to run, you can run the transaction sm50 in AII, to select that process and debug that process. Since the above is a while loop change the wf_break value to anything other than 0, and use the debugging keys to do your work.

Can we debug the Rule durring payroll run ?

Hi SAP-HR Experts .
Dear Sir can we debug the Rule durring payroll run ?
I meant to say that if we put many break points i std program of PE02 .
and run the payroll of a employee then why system processing do not stops on
thsoe break points ????
i want to see how a rule processed durring payroll run .?
Any help / suggestions urgently required ..........
Kind regards : rajneesh .

Hy RM!
The follow includes are used to control RULES inside report payroll driver (HXXCALC0).
You can try, using break points inside this:
include rpcbof00.        " operations
include pcbofbr0.        " OPERATIONS BEGIN-WHILE for special country
include rpcbu109.       " OPERATIONS SUB-Routines 1
include rpcbu209.       " OPERATIONS SUB-Routines 2
include rpcbu309.       " OPERATIONS SUB-Routines 3
include rpcbu409.       " OPERATIONS SUB-Routines 4
include rpcbu500.       " OPERATIONS SUB-Routines 5 travelling expens.
include rpcbu600.       " OPERATIONS SUB-Routines   incentive wages
include h99cavera.      "LIN (ADDED) New average functionality
include h99cavera_old."don't use old average oeration MEANV "XUL
include rpcbua09.        " Accruals                      "YLHAHRK006605
Regards!

How can we debug the screen pop up?

How can we debug the screen pop up?

Hi,
if you know where the popup is raised it is easy of course as you just have to uses F6 to keep the debug mode running.
But there is a way to get the popup into debug mode similar to typing /h into the ok code field of a sandard dynpro. Therefore you have to do the following steps:
1) click the "Create a Shortcut" button in the gui to get a shortcut on your desktop (the button next to new session)
2) in the oped screen for shortcut setting choose:
     type -> system command
     command -> /h
     depending on gui release you have to enter a system ID -> use the one of your system and parameters -> just type abc
3) press finish to create the shortcut
If you have done this you can drag and drop the shortcut from the desktop to a sap session or popup to switch on the debug mode. One shortcut works for all systems you have, the system id in it does not matter.
Oh, while I often have the case that I forget to resize the window before the popup appears so i cannot access the shortcut directly on the desktop, just remeber that you can always open a small file explorer window go to the desktop folder and drag it from there ;o)
Best Regards
Roman

How can I control the workflow in the award the Rfx response

HI,Experts :
I work in SRM 7.0 ,RFx scenario .
In my case ,the supplier submit his RFX response according the RFX ,and the purchaser awards this response .
There are 3 steps workflow for one type RFX response,and 4 steps workflow for another RFX Response .So ,I know I just can use the standard transaction type for the RFX Response .SO ,How can I control the workflow in this case .
Bestregards
Alex

Hi,
If i understand your question correcly, you have to determine the process schema definition dynamically based on the transaction type.. then you can configure the process level ( 3 or 4 ) based the process schema definition..
Saravanan

How can we debug the deleted object?

If one of the object is deleted from the universe and which is in the existing universe, The report will not work. if we refresh the data in the report we will get an error like "Some objects are no longer available in the universe". Is there any way to debug the deleted object?
please help me......

HI,
If you want to see which object is deleted then follow below steps.
1) Open the Webi report
2) click on -> Tools & Change source.
3) Chose the existing data source and click -> next
4) in the next window you can find which object is missing or deleted from the universe and you can remap the objects.
regards,
Amit

How can i trigger the workflow from REPORT

hi,
my requirement is, whenever Z... Report Is generated there is Icon called print. the write the code for printing icon. if printing Icon fails the workflow will be trigger.
how can i trigger this from report. and i send attachent of report with mail to next person to sap inbox.
pls let me know.
pls give any documentation if you have.
thanks & Regards
Sankar.

Hi,
Workflow container
swc_container        lt_container.
swc_create_container lt_container.
swc_set_table lt_container '<cont_name>' lit_int_tab.
CALL FUNCTION 'SWE_EVENT_CREATE'
    EXPORTING
      objtype           = lc_objtyp
      objkey            = lv_objkey
      event             = lc_event_name
    IMPORTING
      event_id          = lv_eventid
    TABLES
      event_container   = lt_container
    EXCEPTIONS
      objtype_not_found = 1
      OTHERS            = 2.
IF sy-subrc <> 0.
    yv_err_flg = gc_true.
    EXIT.
ENDIF.
Rgds,
Prakash

Can we debug the Workflow ?

Similar Messages

Maybe you are looking for