How can we debug the screen pop up?

Hi,
if you know where the popup is raised it is easy of course as you just have to uses F6 to keep the debug mode running.
But there is a way to get the popup into debug mode similar to typing /h into the ok code field of a sandard dynpro. Therefore you have to do the following steps:
1) click the "Create a Shortcut" button in the gui to get a shortcut on your desktop (the button next to new session)
2) in the oped screen for shortcut setting choose:
     type -> system command
     command -> /h
     depending on gui release you have to enter a system ID -> use the one of your system and parameters -> just type abc
3) press finish to create the shortcut
If you have done this you can drag and drop the shortcut from the desktop to a sap session or popup to switch on the debug mode. One shortcut works for all systems you have, the system id in it does not matter.
Oh, while I often have the case that I forget to resize the window before the popup appears so i cannot access the shortcut directly on the desktop, just remeber that you can always open a small file explorer window go to the desktop folder and drag it from there ;o)
Best Regards
Roman

Similar Messages

How can I get the screen to lock on my iPhone 4, so I don't press buttons while talking?

I just upgraded to the iPhone 4. When I am talking on the phone, the screen doesn't lock, so I am constantly pressing buttons or hanging up on the person I'm talking to. How can I get the screen to lock while I'm talking? It's driving me NUTS.

The otterbox is one of the culprits. Take the phone out of the case and see if it still happens. If so it is not the case. If the problem goes away, then you may need to make the hole slightly larger. My family has three iPhone 4's in otterboxes and none have this problem. Other users on this forum have reported success with the above methods.

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

How can we Debug the workflow?

Hi,
How can we debug the workflow?
Please help me on debugging the workflow in step by step procedure?
Early reply is highely appriciable.
Regards,
Chow.

Hi,
If you want to set breakpoints in method which is used in workflow task then it is possible
till ECC5 am afraid about ECC6
you can see the graphical view of workflow through transactions said by Kalpesh
you can also use swwl (delete workflow) for viewing the container elements of the workflow.
SWI2_ADM1:Workitem without agents
SWI2_DIAG:Workflow with error
these transactions are also helpful
Thanks & Regards
Hari Sankar M

HT204380 How can I make the screen full screen when I am calling?

How can I make the screen full screen when I am calling on Facetime on a Macbook Pro Laptop?

Ok but if the iPhone 5s and 5 can go full screen the why can't the iPad Air as it too is new the problem shouldn't be hard to solve as I have looked the apple site and it show it just fine in full screen so I'm sure you understand when I say there is most definitely away of doing it so can Apple just sort it out I'm always telling my m8 how good Apple devices are and I've been let down on this so come on fix it PLEASE

How can I stop the screen on my iPad from dimming & turning off so quickly?

How can I stop the screen on my iPad from dimming & turning off so quickly?

Settings>General>Auto-Lock>Set the time you want.

How can I unlock the screen of my mini ipad???

how can I unlock the screen of my mini ipad???

http://www.ilounge.com/index.php/articles/comments/resetting-a-forgotten-ipad-pa sscode/
Hopefully you have a backup.

How can I unlock the screen after a shock lighter?

how can I unlock the screen after a shock lighter?

What is a shock lighter? I don't understand what you are asking? If you are saying the the slide to unlock isn't working, try rebooting your iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

How can I modify the screen of TCode IW31/IW32/IW33?

How can I modify the screen of TCode IW31/IW32/IW33?
I'm trying to add new fields, so that after inputting the order type and hit on enter, a new field will be added under the Service area. Does anyone knows how can I do it?

Hi,
Screen badi's for IW31.
IWO1_SCREEN_MODIFY
IWO1_PREQ_BADI
WOC_FL_DETERMINE
Refer This:
Screen exit for transaction IW31 for ref. object O150
Regards,
Shiva Kumar

How can I stop the screen from rotating on my iPod touch?

My son is blind and has an ipod5 using the voice over feature. Everytime he moves it says landscape bc of the screen rotating. How can I stop the screen from rotating on him?

To lock the screen in portrait orientation, swipe up from the bottom edge of the screen to open
Control Center, then tap the icon with an arrowed circle with a padlock inside
page 20 of
ios 7.0 ipod touch Manual

How can I reset the screen colors/resolution on an old white macbook?

My screen shows neon colors and a zigzag shapes. How can I reset the color resolution? This laptop was supposedly fixed but when returned all my data had been "lost". The certified mac tech said he reinstalled the OS but lost all my desktop files and HD and couldn't recover. ODDLY, when I started the machine and started fresh, my old hard drive was still there! Although he'd wiped out my current desktop files- gone. But, the screen colors went wonky all of the sudden and I don't know how to resert or correct the resolution. Can any one share a suggestion?

With that kind of issue after returning from a repair where a tech was inside the computer, it should be returned to the same place for an evaluation of the problem, a diagnosis, and perhaps they need to check their work to see if something came loose while they had it apart.
The System Preferences> Displays has a panel to select settings.
You may have to try & see about a reset of System Management Controller http://support.apple.com/kb/HT3964 Or, if reset of NVRAM http://support.apple.com/kb/HT1379 may help. Not sure if these would do anything if there is hardware damage.
Good luck & happy computing!

How can I lock the screen on ipod nano 7th gen?

How can I lock the ipod nano 7th gen? Just pressing the top button doesnt cut it as it still starts to play music or pauses or change volume with the slightest knock im in 2 minds to take it back if you cant lock it as ive only had it 4 days and already found this a huge problem!

Hi! I really couldn't find no way to lock the screen, except pressing the top button (what only cancel any touch you do in the screen).
That's an old discussion about (failure vs feature), but I wonder about if you are running, you can let the screen locked and still change or pause the song by pressing the buttons on the side of the iPod)
hope I could help you

How can i change the screen name in my icould account?

my Apple ID used to have my Dad's name because of the billing issues.. now is changed again to have my name, but i keep seeing that my account on icloud.com still says my dad's name, so if i try to send an email through there it says my dad's name and my email address instead of my name...
how can i change the name that appears linked to my icloud account? (note that as i already sayd my Apple ID has my name now, i jsut want to know why is not my name in my icloud account?)
thank you,

I believe it can be changed by going to https://appleid.apple.com/, click Manage your Apple ID, sign in with your iCloud ID, select "Name, ID and Email Addresses", then click "Edit" next to the name listed under "Your Name" and change it as desired.
Also, if you are trying to change the sender name for your iCloud email account, you'll want to go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done. Then quit Mail (Command-Q) on your Mac and re-open it. Your new From name should now appear in the drop-down list when you compose a new email.
(The image was removed in your post above because it showed your iCloud email address.)

How can I improve the screen loading speed on STB?

Hi all,
My applications on STB requires quite a lot of time when switching the screens.. initially I suspect it might because of parsing xml ... so I change from nano to the one apenz adopts. (thanks apenz:)) ,but the speed does not change much.... then I change all Vector to ArrayList... but still, the first time switching a screen is slow.. subsequent switching is very fast... any one has suggestions regarding how to make it faster? thanks

One good thing to do in a case like this is to measure where the time is being spent. Unless you have a really good relationship with an STB manufacturer, you probably can't use the built-in profiling in a debug build of the STB middleware, though, so you have to profiling with application-level timers.
Over at the hdcookbook project (hdcookbook.com, click on "HD cookbook open-source project), we have a putback pending that adds some tools you can use for this kind of profiling. Since the timer granularity on a BD-J or MHP terminal isn't very fine, it works by sending UDP packets to a PC with a higher-resolution system clock. In some tests yesterday I got quite good results using this technique; hopefully by the end of today we'll have a putback that includes a writeup -- look in <cookbook>/AuthoringTools/profiler/README.txt on Monday if you want to go down this path.
One area that often is slow is parsing XML, or any other text-based format. Parsing a text file format on a client device is just inherently slow. A technique that's usually much faster on the client device is to pre-parse any XML or other text data into a simple binary format you control - you pay the parsing hit at compile time, or at worst on a fast server computer. There are "Binary XML formats" (see http://en.wikipedia.org/wiki/Binary_XML), but often a format of your own devising is a good thing to do, particularly if you have a file type that will be relatively stable, and used widely.
For example, in the GRIN scene graph (also in the cookbook repository), we always ship the declarative scene graph files as a compiled binary. GRIN is a pretty sophisticated example, but if you want to dig around, look for things like GrinBinaryWriter.java and GrinBinaryReader.java in the repository.
Cheers,
Bill

How can I set the screen resolution ?

hello brothers.
my program works ultimately at 1024/768 screen resolution.
since I want to make sure that peaple who using that program will see it correct, I want to explicitly change the resolution of the screen.
how can I do that? please..

I believe you use the setDisplayMode() method of the GraphicsDevice object to do this.
If you go to http://www.scottshaver2000.com/ and download the source code to H.E.A.T., you will find a nice example of video mode switching. His game pops up a window showing the available configurations, then lets you select the one you want and switch to it.
The applicable classes are in his com.sas.gui package: FullScreenJFrame.java and VideoModeSelector.java.
Rick

How can we debug the screen pop up?

Similar Messages

Maybe you are looking for