How to debug the workflow

dear friends,
  please tell me how to debug the workflow, if you have time then you just see the workflow WS99900212 . in this i have done Leave Approver Notification . but i want to debug on that how to flow step by step .
please you tell me on same workflow , where i am going to take breakpoint.
Thanks in Advance for help.
Cheers.
Puneet.

You can try first of all to enable more logging. (I assume you are running release ERP 2005 since you are not saying what your release is.)
In the workflow builder, select menu item "Goto", "Basic data"
Select the "Version-dependent (current workflow version)" tab
Select the "Control" tab within the version-dependent subscreen
Select the "Performance optimization" tab within the control subscreen
Change the "Settings" drop-down value to "No restrictions on logging".
That will give you much more information in the workflow log. The description of this choice says "All the messages are logged. All runtime operations can be traced." As also noted: don't keep this setting in a production system.

Similar Messages

  • How can we Debug the workflow?

    Hi,
    How can we debug the workflow?
    Please help  me on debugging the workflow in step by step procedure?
    Early reply is highely appriciable.
    Regards,
    Chow.

    Hi,
    If you want to set breakpoints in method which is used in workflow task then it is possible
    till ECC5 am afraid about ECC6
    you can see the graphical view of workflow through transactions said by Kalpesh
    you can also use swwl (delete workflow) for viewing the container elements of the workflow.
    SWI2_ADM1:Workitem without agents
    SWI2_DIAG:Workflow with error
    these transactions are also helpful
    Thanks & Regards
    Hari Sankar M

  • Can we debug the Workflow ?

    Hi All,
    I have created a method in the BO, it is working fine when i tested that BO. then i call that method in an activity step with required parameters, but that didnot work.
    Then i tested that Task that i used in that Activity step using SWUD transaction, that task is also working fine. It is giving the desired output. Then i checked the binding of the workflow, it seems to be fine, but still i created it again, but still when i am executing workflow, values are not coming into Workflow container.
    Is there any way to debug the workflow ?
    how can i know that where is the issue ?
    Regards,
    Raman.

    Check the binding between event and workflow container...
    Regarding the debugging..please search the forum...
    Already discussed in lot of threads..
    Edited by: Swaminathan PJ on Jan 21, 2010 4:09 PM

  • How to purge the workflow which is in process

    Hi Friends,
    I am facing one problem in the AME Workflow.
    when a user submit a page for approval process, workflow engine invokes . and in the hr_api_transcations table transacation id is created for that workflow transacation. now the problem is, if i purge that workflow process using concurrent program 'PURGE OBSELETE WORKFLOW RUNTIME DATA' . it is deleting the workflow. but when i see the hr_api_transacation table still the transacation id for that workflow is active.
    Example :-
    when i see through through the responsibility (workflow administrator web applications)=>Administrator workflow=>Status monitor
    when i type the item key say some x and search for the workflow status i cant see the workflow status. i can see it is deleted.
    but when i type the same item key in the hr_api_transacation
    like :- select * from hr_api_transactions where item_key='X' i can see the status of this transacation is active and workflow is in pending.
    can anyone explain me why system is behaving like.. how to stop the workflow process and how to delete the transacation id from the table.
    Thanks in advance

    Please check below nots
    453137.1 (Oracle Workflow Best Practices Release 12 and Release 11i) sections titled "Choosing Not to Use E-mail Notifications" and "Cleaning Up the WF_NOTIFICATION_OUT Queue"
    How to purge e-mail notifications from the workflow queue so the e-mail is not sent [ID 372933.1]
    264191.1 describes how to Purging Oracle Workflow tables of obsolete workflow runtime information for completed workflow processes is a required regular maintenance tas
    Notification Mailers Unavailable
    How to delete undelivered notifications from WF mailer

  • How to allocate the workflow to the action defnitions in solution manager

    Hi,
    we are having solution manager with the CHARM configured, and currently we are looking for the trigger of mail and workitem for change of action. the work flow is designed for that, but how to assign the workflow to the condition and processing type .
    please suggest, points are definetly awarded.
    Thanks and regards
    keerthi

    Hi,
    Well, why dont you check the event that gets triggered during the Status change of the user?
    This can be done by switching on the EVENT TRACE using SWELS txn and simulate the BUSINESS PROCESS and then check the event trace using SWEL.
    After getting the required Business Object and event, Please attach your WF to that EVENT in the BASIC DATA-START EVENTS.
    Regards,
    <i><b>Raja Sekhar</b></i>

  • How to use the workflow in the pm notification?

    Hi, guys
    who can tell me how to use the workflow in the PM notification?
    ths!

    hi
    you can refer the following links
    [Preparation and Customizing|http://help.sap.com/saphelp_47x200/helpdata/en/7b/b7410e53b211d38abd0000e8284931/content.htm]
    [Operation and Link to Application Functions|http://help.sap.com/saphelp_47x200/helpdata/en/2e/f1ab4456ca11d38ac30000e8284931/content.htm]
    regards
    thyagarajan

  • How to debug the background job in ABAP

    Hi Guys,
    Can anyone let me know how to debug the background job in ABAP.
    Thanks in advance
    peter

    Hi,
    Goto SM37 and see the log if any is there and based on that you can check the code.
    you can't debug background job.
    Create a Variant for the Program and
    Schedule JOB in background:
    Go to SM36 create a Job
    enter Program and Variant for that program in STEP..
    click on Start Condition
    Click on DATE and TIME enter date scheduled Start and END times
    click on Period Values
    Click on HOURLY/WEEKLY etc
    CLick on RESTRICTIONS also to use further criteria.
    so your job will be scheduled and run as per your requirement.
    and in SM37 Transaction check the status of that JOB
    Check this link for scheduling jobs..
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/3a7f87505211d189550000e829fbbd/content.htm
    Check this
    http://jplamontre.free.fr/SAP/Debug%20background%20process.htm
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/abap+debugger&
    Regards,
    Padmam.

  • How to find the workflow admins for all costcenters ?

    Dear SRM gurus
    We are using Classic scenario with N th step workflow with BADI.
    we have a requirement.
    How to find the workflow admins for the particular costcenters.
    we used HRV1222A where ATTRIB EQ <Z attribute>(This is our own attribute to group all the costcenters)
    used table HRP1001 to find the Admins but results are not correct because it is not showing my user id(I have all authorisations).
    Is there anyway to find all the admins for a cost center(users are more than 7000+)
    can anybody send work flow related presentations or cookbook
    Thanks in Advance.
    srinu

    hi
    I have not received any thing.Please send again
    [email protected]
    [email protected]

  • How to debug the report which isrunning in Background?

    Hi all,
    1.How to debug the report which is running in Background?
    thanks & regards
    vishnuvardhan

    Hello,
    Do like this.
    Create an infinite loop before the line u want debug.
    data: lf_flag.
    do.
    if lf_flag = 'X'.
    exit.
    endif.
    enddo.
    Now execute the report in background. In Tcode SM37 select ur job and in menu job--> Capture Active Job
    IT will stop at the point of infinite loop.
    Regards,
    Vasanth

  • How to debug the method in abap program

    How to debug the method in abap program ?
    Could you please give the solution.
    Thanks
    sai

    Hi ,
    Place break point at call method .
    It takes u in to the method implementation .
    Here u can analyse the method implementation ...
    Reward if useful
    Thanks
    Jagadeesh.G

  • How to Initiate the Workflow from Java webdynpro?

    Hi All,
    I am developing Customized WD application for ESS, which in turn having integration with Workflow.
    Now How to Initiate the Workflow coding part in Webdynpro Development.
    Through Adaptive RFC Model, i created model using sap_wapi_start_workflow RFC
    Can anybody provide the sample code on this!!!
    What are the stpes i have to follow to this Workflow Initiation from WD Java..
    Thanks In Advance
    Krishna

    Krishna,
    What Alejandro is mentioning that create a RFC which accesses you workflow on ABAP end. At your Java side just make the call the BAPI.
    So you need a BAPI say ZMYBAPI which accesses your ZWORKFLOW.  Now on Java side create a WD project which accesses ZMYBAPI.
    For information on how to connect to a BAPI please refer this [link|https://www.sdn.sap.com/irj/sdn/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#15]
    Chintan

  • How to debug the routines in the transformations as well as start,endroutin

    Hi all,
    Can anyone explain me how to debug the routines in the DTP, as well as the how to debug the start and end routines>?
    I am new to bi 7 ?
    thanks
    Pooja

    Hi,
    In Execute tab change the processing Modes to 'serially in the dialog process for debugging' . then you can see the option 'simulate'.
    http://help.sap.com/saphelp_nw70/helpdata/en/45/8594ebd17f1956e10000000a11466f/content.htm
    Step by step doc,
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0038ad7-a0c7-2c10-cdbc-dd674682c8e7?quicklink=index&overridelayout=true

  • LSMW VD51 , Validations in Begin of Transaction; how to Debug the code?

    Hi All,
    I have written code for validations i Begin of Transaction in the field mapping 5th step of LSMW for VD51.
    Now this code not getting triggered at the time of Conversion of Data. How to debug the code. I have put a static break point 'BREAK-POINT' still not getting triggered.
    Any suggestion / solution for this issue.
    Thanks and Regards,
    Narsimha Kulkarni

    Hi Narshimha,
    Make any mapping error during mapping and check the syntax of mapping it will drag you to the lsmw report there you can put your break point. You can check the report name from transaction code as well.
    Remember this mapping block will execute when you execute the step Convert Data in LSMW.
    Regards
    Dhirendra

  • How to debug the update FM

    Hi,
    I am facing a problem with the debugging of the update FM. I have enabled the update debugging and the system says that update debuging is on . even though the control did not go into the FM.
    Do i need to check in any other transaction . Please give me the details steps on how to see the what is happening in the update FM.
    Full marks are guaranteed.
    thanks
    sankar

    Hi
    I have got a clue from SAP help on how to debug the update FM see the below information from SAP
    When you debug a program that calls function modules using the IN BACKGROUND TASK addition, they are processed in a background work process (additional internal session). If you set the In background task: Do not process option, the system collects the function calls, but does not start the background work process. The Debugger assigns a transaction ID, which identifies the background work process uniquely. You can now start the Debugger for the background work process using transaction SM58. You can select the function module concerned here, and then execute it via the Edit menu.
    I have done everything that is said above , but could not find any entries in SM58
    any suggestions
    thanks
    sankar

  • How to debug the smart forms

    Hi All,
    Can any body guide me how to debug the smart forms.
    Thanks & Regards,
    Satish.

    Hi,
    The the best way to debug the form is to put a breakpoint in the function module generated by the smartform.
    Procedure:
    Open the smartform we want to debug.
    Goto Environment -> Function module name.
    Open the function module in SE37. From the menu GOTO -> main program. Open the last include.
    This incude contains the entire code ie the code we have written in initalization + form routines + program lines + sap generated code.
    Even we can search for the text nodes, folders, templates, tables, graphics, address nodes etc with their names.
    Put a breakpoint at any point you want.
    If we issue any doc which triggers this form, when the control reaches the break point it will stop.
    Please note that hard-coding the break points in the code ( Program lines ) is not recommended and it can´t be done unless if it is development server.
    So, always put a session break point in the related function module.
    We can use SFTRACE transaction to know the sequence of the control flow.
    If you want to break at each and every text that is printed on the output form put the break points in the forms.
    1. %write_text  to break at text element.
    2. %WRITE_TEXT_MODULE  to break at text module.
    3. %WRITE_INCLUDE_TEXT  to break at include text.
    Please put a break point at the first sy-subrc check.
    If the control reaches this point, you can find the name of the element in the varible NAME and the content in the text node in %TEXT.
    Its easy to understand the sequence of the printing if we put a breakpoint as stated above.
    Regards,
    Satish.

Maybe you are looking for