Can we define a new header text (long text) in PR (ME51n)

Dear Guru,
I have some requirement that we would like to define a new header text and default data in that text.
Please kindly advice.
Thank you very much.

HI Rahulkumar,
As the path that you've adviced, I can not define at header level. It define as item level.
Could you explain more how to define as header level?
Thank you.

Similar Messages

Add new tab of long text to production order

Hi all
i need to add new tab of long text to production order, which will be blocked for changes.
anyone can help with this?
thanks.

Yossi,
The purpose of long text is so that business users can add additional information while processing the order so that everyone can check the text.
Please tell us why do you want to block the production order text? Also why do you need a new tab for long text? and where do you want that information to be stored?
-Swapnil

Can v define a new absence type without changing the grouping.

Dear friends,
      can we define a new absence type without changing the employee subgroup grouping and psg.
my requirement is i have a absence type lop which has 1 as esg and 28 as psg.as per my pcr i have to cumulate total lop hours and deduct from total working hours.
can any one tell me how can i modify the absence type so that i can use it in my pcr.
Regards,
sai prasad

Dear sreenu,
    if i create a time type.can i refer in this
following pcr
5200
ADDWT *       NUM=GSAP**
ADDWT 5310
if yes, can you plz tell me how can i do it

BOM Item Text/Long Text

Hi Gurus,
I want to change a BOM and update/create the BOM Item text/Long text. I just want to change the BOM and create an item text (If the text is more than 80 chars, then I should be able to create a long text).
I tried using FMs SAVE_TEXT and CREATE_TEXT without much luck. Could someone throw some light on how to achieve this.
R

Thanks Sudheer. Yes, I'm passing the correct parameters. Please see below.
        CONCATENATE sy-mandt ls_stpo-stlty ls_stpo-stlnr
                                 ls_stpo-stlkn ls_stpo-stpoz
          INTO lf_tdname.
          CALL FUNCTION 'CREATE_TEXT'
            EXPORTING
              fid       = 'MPO'
              flanguage = sy-langu
              fname     = lf_tdname
              fobject   = 'BOM'
            TABLES
              flines    = lt_lines
            EXCEPTIONS
              no_init   = 1
              no_save   = 2
              OTHERS    = 3.
The thing is that it should save the text in Line1 and line 2 of the item text if the length is less than 80. I assume that the TEXT Fms will do it for me. Please correct me if I'm wrong.
I have also tried a direct database update by changing the stpo-ltxsp field. No luck again. Did someone has updated/created the text using this method ?

How to compare New and Old long text at PO Line Item

Hi all,
I am Using user exit "EXIT_SAPMM06E_013". In user exit i am trying to compare the old and new values of PO maintain at item level. All this values, i am getting in X and Y structures in user exit
For long text there is no Such structures. When i am trying to fetch the details from FM Read_Text to fetch this values, Every time i am getting old values. Since new values has not yet been store to database.
Is there any way through which i can compare the old and new values of item Long text.
Thanks in advance,
Regards,
Vikram Singh.

Hi Vikram,
Iam not sure though, did you chekced EXIT_SAPMM06E_022 if it helps you in anyway.
Regards,
Swarna Munukoti

How can I define a new Search Node type?

Hi experts!
I'm trying to modify PPOME transaction, but I can't create a new Search Node type. Can anybody give me the necessary steps I have to do? Other question, Is it possible to create a new Search Node for a Organizational unit? Or this only could be possible for new objects types?
Thanks a lot,
Regards,
Rebeca

Hi Rebeca,
You need to create a Search node only if you create a new object type (e.g. ZP).
For org unit, you don't need to create one (unless you wanna change search details)
Otherwise, you can use existing search nodes for standard object types.
What you can do is, you can add a search node to an existing scenario in order to make it visible in the object manager part (left-hand side of the screen).
To create a new search node :
Goto SPRO Personnel management - Organizational Management - Hierarchy Framework - Object manager - define your own search node -
> Define search node : Add new entries here.
To add a search node to a scenario (e.g. to make a new search node visible on the left-hand side of PPOME)
Goto SPRO Personnel management - Organizational Management - Hierarchy Framework - Object manager - define your own search node -
> Scenario Definition (Object manager) : Select the scenario (for PPOME it is OME000), double click the "Search nodes" and create new entries to add the search node here. Then double click the "Search tool", copy the lines of a similar search node and change search node field to the new one.
Best regards,
Dilek

Exit for FB02 in order to restrict the users to change text & Long text

Hi All,
In FB02 for each line item there is a text field and a Long text option.
my requirement is to restrict some users to change the long text and text values though the users have authorization to FB02.
Thanks in advance,
Regards,
Deepak

Hi Firoz,
we have similar requirement..Please help us.
In FB02 the SGTXT (Text field) field should be editable only for particular users.
Can you please give the procedure you have done with screen shots if possible.
Regards,
Khaja

CATS Short Text & Long Text

Hello Experts,
How are "Short Text" and "Long text" used in CATS? I thought that these were supposed to be two separate text fields, but when I make an entry in the Long text field, the value shows up in the Short Text field.
Are these two separate fields? Any ideas how to use both Short Text and Long text and not have the value copied from one to the other?

Hi,
You can Create a rule in Alert Configuration based on the <b>error code</b> under "where did the error occur".
Based on this you can trigger the required Alert category.

GL short text/ long text

Hi guys,
Is it possible to display both GL short text and GL long text while performing transactions.
Normally the long text is only displayed.
Is it also possible to display the short text.
Thanks,
Srikanth.

hi
standard SAP does not have this functionality

Why can't i save new phone numbers in text message...

if there's a way, could u tell me how???

Open the message, go to Options -> Automatic find on (Most probably this would be set to off). Now, scroll down, and when the number is highlighted, go to Options -> Use number -> choose from call/add to contacts, etc.
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Translate Custom (Z infoobject ) short text/long text

Hello ,
Scenario:
When the user (with the logon language French) run the report via Portal, instead of displaying the text of the custom info object (selection screen) in French, it just displays the technical name of the info object.
Request:
Please let me know if any body done the language translation for the scenario above.
I appreciate your input.
Thanks
Ram

Hi,
there are no french texts. You must create it.
Use the transaction SLWB to translate the texts.
Docu (for axample): http://help.sap.com/saphelp_nw2004s/helpdata/en/43/907a19da5621b5e10000000a1553f6/frameset.htm
Sven

(How) Can I include Long Texts in Reports or Queries?

Hello,
We need to send our vendors their contract details including some of the long texts data.
So far we were sending excel spreadsheets to the vendors without the long texts. Is there some way we can start sending the spreadsheets to our vendors adding few extra columns for the long texts. Some of the vendors contracts have 20+ lines of data in the long texts.
Are there any better or easier ways than excel spreadsheets?
Is any kind of query development possible where long texts can be included?
Appreciate your time and answers.
Fred.

Sorry friends for not communicating my requirement clearly. I am aware of the functions to retrieve the long texts data for purchase orders/contracts.
I need some help in downloading the data to excel sheets. I believe there are restrictions in the number of characters that can be accomodated in a excel column, so I am not sure if very long texts (say >500 lines & 72 chars each) can be wrapped around within a excel column.
Also can a query be written to extract long texts, or can long texts, >500 lines & 72 chars each, be displayed using ALVs?
Thanks a lot for your time. Appreciate your inputs.
Below is a sample of how the report needs to look.
Contract Number     Vendor     Long Text1     Long Text2
0000000001                     ABC Firm     Text ID'01ABC' Text ID'01ABC' Text ID'01ABC' Text ID'01ABC'      Text ID'02ABC' Text ID'02ABC' Text ID'02ABC' Text ID'02ABC'
                                          Text ID'01ABC' Text ID'01ABC' Text ID'01ABC' Text ID'01ABC'      Text ID'02ABC' Text ID'02ABC' Text ID'02ABC' Text ID'02ABC'
                                          Text ID'01ABC' Text ID'01ABC' Text ID'01ABC' Text ID'01ABC'      Text ID'02ABC' Text ID'02ABC' Text ID'02ABC' Text ID'02ABC'
                                          Text ID'01ABC' Text ID'01ABC' Text ID'01ABC' Text ID'01ABC'      Text ID'02ABC' Text ID'02ABC' Text ID'02ABC' Text ID'02ABC'
0000000002                     XYZ Firm     Text ID'01XYZ' Text ID'01XYZ' Text ID'01XYZ' Text ID'01XYZ'     Text ID'02XYZ' Text ID'02XYZ' Text ID'02XYZ' Text ID'02XYZ'
                                          Text ID'01XYZ' Text ID'01XYZ' Text ID'01XYZ' Text ID'01XYZ'     Text ID'02XYZ' Text ID'02XYZ' Text ID'02XYZ' Text ID'02XYZ'
                                          Text ID'01XYZ' Text ID'01XYZ' Text ID'01XYZ' Text ID'01XYZ'     Text ID'02XYZ' Text ID'02XYZ' Text ID'02XYZ' Text ID'02XYZ'
                                          Text ID'01XYZ' Text ID'01XYZ' Text ID'01XYZ' Text ID'01XYZ'     Text ID'02XYZ' Text ID'02XYZ' Text ID'02XYZ' Text ID'02XYZ'

Table for Long Texts of MICs in Tasklist

Dear All
Can any body tell me from which SAP table i can get the LONG TEXT maintained for MICs in any tasklist.
Table PLMK only shows wether long text maintained or not, but i want the value in LONG TEXT.
thanks
Zeeshan

This may be helpful.
SAP stores comments (text fields) in a separate table. STXH is the text
"header" table (STXD SAPscript text file header). STXH-TDOBJECT =
'KNA1' will bring back all the customer comment headers. STXH-
TDNAME='0000010744' is the header record for the comment for customer
10744.
It is not always so simple to figure out what the TDOBJECT (object needed by function below - sometimes it is a table name, other times...), TDNAME (name needed by function below - sometimes it is a document number & line item or customer number, other times... ) & TDID (id needed by function below - it is always the long text id). There are several methods that can be used. You can create the long text that you are researching and using, SE16 for table STXH search TDLUSER = to your kerberos principal and TDLDATE = to today's date. This is modify date & user. Alternatively, you can find an existing item with the long text and figure out the date and user who last modified it and use this information in your search. Once you have STXH row for text of interest, use ZCAFTXT to test your research. Project Titles and WBS Titles are a bit more complex.
Changes to sales contract long text between 3.0F and 4.5B.
The following code is a function that will return a customer comment.
form get_comment using cur_kunnr.
call function 'READ_TEXT'
       exporting
            id                      = '0002'
            language                = sy-langu
            object                  = 'KNA1'
            name                    = cur_kunnr
       importing
            header                  = thead
       tables
            lines                   = tlinetab
       exceptions
            id                      = 1
            language                = 2
            name                    = 3
            not_found               = 4
            object                  = 5
            reference_check         = 6
            wrong_access_to_archive = 7
            others                  = 8.
if sy-subrc = 0.
    loop at tlinetab.
      write / tlinetab-tdline.
      add 1 to line_cnt.
    endloop.
endif.
endform.
The above subroutine is called with the following code:
if p_cmnt = 'X'.
   tdname = cur_cust-kunnr.
   perform get_comment using tdname.
endif.
These data elements are defined as:
data: begin of tlinetab occurs 100.    "table to process comments
        include structure tline.
data: end of tlinetab.
data: tdname           like thead-tdname.
Vishal Jonnalwar

Printing long text from material master in from MM07ET

Hello,
I'm using WEE1 output condition to print labels for gr. I'm using the standard object MM07ET and I need to include in the label the long text from material master - table STXL. I know that there is a function READ-TEXT in ABAP for this but I don't have access to abap development. I need to know if it's possible to include a command in the sap scrip to retrive the long text without modifing the program SAPM07DR.
Thank you!

Hi,
Sorry for the late Reply, Please use the following code in SAPSCRIPT
/: INCLUDE &EKPO-EMATN& OBJECT MATERIAL IDGRUN LANGUAGE EN
&EKPO-EMATN& material Number ( Here please maintain the Field value which is used to print Material Number )
MATERIAL is the Object Name
GRUN Is Text ID
EN Language
You can use the above code for priting long text in the SAPSCRIPT FORM. to find the object name and ID please follow the below Steps
Go to the window were you have maintained Long text... Double click on the text, then it will open a new window.. there Click on the top Goto-->Header.. here you will find the relevant data as follows:
Language: EN
Text ID : GRUN
Text Object: MATERIAL
Name: Material Code
Regards
GK.

Database Table where modifications to message long text are stored (log)

Hi,
As per manual correction mentioned in SAP note 1144291,
we have changed the long text for message XC092 by modification of the long text.
This note 1144291 is a pre-requisite for SAP Note 1310808.
After the notes were implemented, it is noticed that message CURTO1055 has incorrect information in its long text. This is because, the variable in the long text are not correctly defined in the long text.
Both the messages XC-092 and CURTO1-055 are SAP standard.
The error for CURTO1-055 can be rectified by modification of the long text and maintenance of the correct variables.
However, my question is:
Where do we check the log for document modifcation for a message long text.
I have found the logs relevant to my modification in table DOKHL and DOKIL.
But in which table do we get all of the foll. data:
- Message class
- Message number
- Modification name
- Modification created by
- Modification done on
- Last changed by
- Last changed on
Kindly help. A <removed by moderator> solution would be really helpful.
Best Regards,
Smruthi
Edited by: Thomas Zloch on May 5, 2011 12:07 PM - urgency reduced

Hi Smruthi,
The modification changes would be in the SMODILOG table. Please note this is a core basis table and should not be changed, however to best find your changes search under the TRKORR field with the relevant tp request.
Best regards,
Derrick Hurley
Development Workench

Can we define a new header text (long text) in PR (ME51n)

Similar Messages

Maybe you are looking for