Can we perform Progress Order option from Order Header level?

Hi,
Can any one let me know about the basic functionality of Progress Order and on which scenario we can apply this option and also please clarify me the below doubt.
Our Functionality as follows:
1. Once the Order is booked then Credit Hold is applied against to the Order at the Order Header Level
2. We are releasing the Hold from Actions tab
3. Now we are placing the cursor at each Line Level and Progressing the Order using the Progress Order Option to fulfill and close the Sales Order lines.
Now what my doubt is Credit Hold is applied at Order level but we are performing the Progress Order option from Level. When I try to user the same option from Order Header level system is showing the following error message “APP-ONT-251015: There are no eligible activities to be completed. There is at least one deferred or externally notifiedactivity in this workflow. Please see the workflow monitor or status window for more information” because of this I am using progress order option for each line.
I want Progress Order option to applicable for entire Order so that I can fulfill and close all Lines at one time.
What is the best way to Progress Order for entire Order instead of selecting each line to Progress the Order.
Please share your views.
Regards,
Kevin.

Hi Kevin,
I am not quite sure if I understood your issue correctly but if you are using R12, there is a check box available called "Progress Workflow" on Holds definition, which will progress the entire order.
With Regards,
Vishal Majithia

Similar Messages

I can´t remove win from my mac because I can´t select the remove option from boot camp assist. Can anybody help me?

I can´t remove windows partition from my mac because I´can´t select the remove option from boot camp assit. Can any body help me?

open disc utility choose the drive you need partitioning highlight the bootcamp partition and click on the minus sign at the bottom left.
after this manually resize your drive by dragging the partition line all the way down and click on partition.

Purchase Order Total Amount at Header level and Report Execution

Dear Experts,
Here by i am facing problem with Purchase Order Total amount.
I have local Pricing Procedure for price stipulations (like discounts, Freight, packaging). the calculation at item level is correct. tax calculation is done by tax code. The total PO Price is including all items in PO and tax amount. But at header level conditions net value is showing only gross price.
How to pick up total price including tax amount at header level conditions?
Please provide me solution on it ?

Dear Experts,
Here by i am facing problem with Purchase Order Total amount.
I have local Pricing Procedure for price stipulations (like discounts, Freight, packaging). the calculation at item level is correct. tax calculation is done by tax code. The total PO Price is including all items in PO and tax amount. But at header level conditions net value is showing only gross price.
How to pick up total price including tax amount at header level conditions?
Please provide me solution on it ?
Edited by: Kiran Mujumdar on Feb 23, 2009 7:08 PM

How can i change VBAK-Faksk of VAO1 at header level using BAPI_SALESORD_CHA

Hi Experts,
How can i change the value of VBAK-FAKSK (Billing doc value) at header level .
by using the bapi_salesorder_change.Could you please send the sample code
how to change the value of any field in VBAk . so that i can take as reference and work accordingly ..
It's urgent,
thanks
kumar.

Hi,
Check this
PARAMETERS: p_vbeln type vbak-vbeln.
DATA: l_header_inx TYPE bapisdh1x,
l_header_in TYPE bapisdh1.
data: lt_return type standard table of bapiret2.
MOVE: 'U' TO l_header_inx-updateflag,
'X' TO l_header_inx-bill_block, " Billing
'ZL' TO l_header_in-bill_block. " Billing block.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = p_vbeln
order_header_in = l_header_in
order_header_inx = l_header_inx
TABLES
return = lt_return.
* check for errors.
LOOP AT lt_return transporting no fields WHERE type = 'A' Or type = 'E'.
EXIT.
ENDLOOP.
If sy-subrc = 0.
write: / 'Error in updating'.
ELSE.
commit work and wait.
endif.
Thanks
Naren

ECC report for sales order status from order entry to Invoice (OTC rpt)

Dear All.
Looking to see if there's a standard report or transaction that we can use to review sales order line item status.
VA05 provides a good view from sales, and VL06O provides a good view from LE, and VF05 provides a good view from billing.
But there is there something that would list sales orders and show related quantity, open, delivered, billed all in one report?
Many thanks!

Thank you Shiva.
That's what we were thinking as well. Just wanted to make sure we didn't miss something in case SAP provided a template or customizable program for this.
Thanks

How can i redirect 5 choice options from a drop down list into 5 separate text fields?

I have a number of drop down lists which push one of 5 choices to a text field on another page.
I want to be able to push each choice from one drop down field to a separate field, so that it is not possible to duplicate the drop down choice.
The resulting page is going to be locked.
What script do I need to use to send each of the five choices specifically to five separate text fields?
Thanks for the insight.

Hi Paul,
I've had a look at the sample script you posted. I'm not sure how to make it work with the form I'm creating. (I sent it to you earlier.) Would you mind setting one of the fields up on my form so that I can get an idea of how to then push the choices set up on the "visible on screen only" to the textfields which are locked on the visible page? Do i lock the fields in the same way?
Will I need to create a new script for each of the arrays I'll be creating? for example, myScript1, myScript2, my Script3....
Why do i need a reset button?
Nellie

Can I perform a mail merge from my writable pdf?

I'm trying to create a writable pdf but I need certain information to be mail merged into it. Is this possible.?

I'm glad you got it to work. I did mention converting the top row to a header row. It's a common error & the solution isn't at all clear. Here's what I wrote some time ago:
You need to designate a row as a header row in the Numbers table. Imported spreadsheets don't mark the first row as a header row. If the top row does contain the labels, hover the cursor over the row number, click the down-facing arrow that appears & choose convert to header row. If you don't have a row with labels to convert, add a header row using the Table menu or click the icon (middle icon) in the format bar then type in the labels.

Purchase order release only at header level?

Hello all,
does anyone knows a method or workaround to allow implementation a release strategy based on the positions
of a purchase order (like the posibilities in purchase requisition's customizing).
I can't find anything that helps further, only a customer development seems to be the solution.
The goal is, to route a workflow on position based cost center and account responsibilities.
There is only a field for PO release status in the table EKKO, not in EKPO. For the PR, there is a correspondig
field in the table EBAN.
Thanks for incoming answers!
Jens

Hi Diego,
sorry, my error! Thank you for your hint, but i can't find ad hoc the matching forum on sdn.
Yes, i'm talking about MM, in detail the customizing of
the purchasing process (procurement).
Best
Jens

I can only see one parent tab from the 2 level Tabs

Hello,
I have some pages, lets say page A, B, C, D.
Now I have a standard tab-set for the pages A and B, its named S1 (and has tabs for the page A and B).
I have another tab-set for the pages C and D, this is named S2 (and has tabs for the page C and D).
Now I have a parent tab to select the standard tab-set S1, this is named P1.
And I have another parent tab to select tab-set S2, this is named P2.
I can now only see one parent tab (P1 or P2), but I cant change from P1 to P2. The standard tabs are working good to select between A and B (or C and D).
As a picture, I see my tabs like this:
_____________P1
A__B
or
_____________P2
C__D
but I want to have:
___________P2 P1
A__B
or
___________P2 P1
C__D
Can anyone help me?
Regards,
Mark

Hm, interesting. I found out that the parent tabsets work both ways:
1) You need to tell the parent tabset for which page it is current
2) you need to tell the page which parent tabset to use

Email,sms from order

how can i generate sms,email automatic from order
please decribe me in detail

Summary
Symptom
This note describes how to enhance the print control for notifications so that you can also send documents as attachments to e-mails. For this, the print document is attached to an e-mail as a PDF file. The e-mail address of the recipient is entered in the dialog box for the print control.
The change affects the papers in QM and PM, the notification and the order.
Other terms
E-mail, QM01, QM02, IW21, IW22, IW51, IW52, IW3D, print, IQS21, IQS22,
IQS1, IQS2
Solution
Implement the program corrections in accordance with the correction instructions. If you are using your own print program, also implement the changes for the include RIPRIF01 in your copy of this include.
In addition, you must add a field EMAIL to the structure WWORKPAPER that is defined with reference to the data element (component type) AD_SMTPADR. You must include this field in the screen SAPLIPRT 0110 as ready for input.
Then regenerate the structure WWORPAPER and the screen SAPLIPRT 110.
You must create the texts for the success messages and the error messages in a separate message class. In the source code, the message class ZZ is intended for this. However, you can choose any message class as well as any message number. The message statements are contained in the include RIPRIF01. The texts are as follows:
          MESSAGE S001(ZZ). "Mail sent successfully
          MESSAGE S002(ZZ). "Mail has not been sent
          MESSAGE S003(ZZ). "No authorization for sending mails
          MESSAGE S004(ZZ). "Error while sending
When you create the function module ZQCE1_CONVERT, maintain the following table parameters:
Parameter name
T_SOURCE_TAB
T_TARGET_TAB
(All other values, such as 'Typing', 'Associated Type' and the indicator 'Optional' are initial.)
In addition, create the exception CONVERT_NOT_POSSIBLE.

Quantity from Order Template to Order

Hello Experts
Does the order quantity flows from order template to order or from order to order when we click on transfer button on B2B web shop ?
What is the standard behaviour.
Thanks

Hi DJ,
This act of transfer button in ISA frontend is same as Copy Business Transaction button in crm gui.
It not only copies the quantity and product but copies sold to party, ship to party, payer, bill to and all the
other details also.You can think it of as a replica of the existing order.
You can edit each and every detail in the new order but sold to party can't be changed.The reason is
ISA application is designed in such a way that it logs in with sold to party and once you are logged in after
selecting a sold to,this sold to is freezed and can't be changed anymore untill you logoff and login again with
some other sold to.
Regards,
Arshi

Oracle Order Management Sales Order

Drear all
i am implement oracle order management ,and this the first once i implement order management and i have many questions i hope i get answer .
1-first i create sales order and thin i book it.
2-i go to action and i chose progress order to create supply order -eligible and go to view out put Assemble To Order Mass Load Report and it create a job order and i take it job number
3-i go to wip discrete job and find my job and release it
4-i go to wip move transaction
5-then i go to wip completion transaction
6-now item delivery in my subinventory
7-then i go to shipping --to release sales order for picking and go on concurrent tab and go to view my request and get move order number and delivery number
8-then i go to shipping transaction to confirm ship but i can complete because the action field isn't active
well that is all i do and i have some question
1-are any steps i forget it or i do the right steps ?
2-how i am shipping and confirm ship?and how i close the sales order?
3-when i create transaction type ONT I Assign IT IN Default LINE TYPE(WORKFLOW), IF i need to add a new line type ,from where screen and what the steps to do that?
i hope i get help thanks and best regard
Essam Essmat
[email protected]

Essam - That's probably a bit too much to cover in a forum. If you have a Metalink account, then go to the top tech docs and download the AR and OM user guides - if not, the 11.5.9 guides are here: http://download-east.oracle.com/docs/cd/B12190_11/current/html/docset.html
On Metalink, there is also a subsection under the top tech docs called business flows, there you can find information on the flow from order to cash etc.

Billing plan (Downpayment) for saved and open sales orders at header level?

Hi gurus,
I have configured billing plan in my SD environment at Item Level.
I want to change it to header level.
Questions:
1- When I make the changes to update the system to have billing plan at header level for future sales orders, is that possible for me to change all my saved orders and open orders with the new settings so that I can also have those saved and open orders with a billing plan at item level?
2- If that scenario is not possible, could we for example copy the data of a previously saved or open sales order into a new sales order with the new customizing (Billing plan at Header level?)
Thanks for your input
Kind regards
Chris

Hi
I am afraid you cannot do that converstion for the existing orders. BP at header level are enabled at teh document type level, while BP at item level is done at item category. So both are independent. Mostly it is advisabel to use BP at item level only.
If you are already using item level BP, and want to mvoe to header BP, then only future transactions can be executed with BP at header level. Existing item level BPlans will remain so in the system.

Profit Center at header level in sales order

Hi Friends,
Is it possible to have profit center entered at header level in a sales order. If yes then where.
Regards,
Wasim.

No, profit center is always assigned at item level.
One of the reason could be, items in a sales order can have different profit centers, hence assigning at header level will impact all the items.
Regards

Probable effects of removing Sold-to from invoice header?

hi
we have a requirement of doing collective billing by Payer and for that we need to remove Sold-to partner details from invoice header to avoid billing split.
We are achieving this by using copy control routine to suppress Sold-to from delivery and (ii) removing Sold-to from header partner procedure of billing type to avoid prevent split due to different Sold-to in preceding documents. (and maintain Sold-to at invoice item level)
Removing Sold-to from header partner procedure was required as otherwise the split indicator UNGLEICH=X was set and we could not find any user exit to set UNGLEICH = space in program LV60AB14 ( SAP ver 4.7 ).
While we are trying to assess the effects of removing Sold-to from invoice header, I would lile to know opinion of others about probable effects of doing such; if anybody has done same thing in past, please help.
thanks in advance

Hi,
As such removing sold to from invoice header will not pose any risk to the process. It is very much possible to have an invoice without SP. You can very well do this and go ahead.
However you can test this by deleting the SP at header level while creating an invoice document on collective basis, and making the payment for the customer. The only place where I have little doubt is about the "Receivables from the customer(sold to party):" in FBL5N. Here we may have some problems in updating the open items in Receivables and updating the payments. So please do the configuration and test this until payment to find out any errors. Along with this, also run a test on Credit Mngt. If there are no implications in Credit Mngt, and Payments in FI, you are safe to continue this as a process.
The much simpler way to ensure SP not to be considered for invoice split will be to create a invoice split routine and code in such a way that SP is not a factor for splitting the invoices.
So evaluate both of them of their advantage and risk and then decide.

Can we perform Progress Order option from Order Header level?

Similar Messages

Maybe you are looking for