Can we plot a unidirectional tree graph in ADF?

Hi,
Is it possible to make a directional tree graphs in ADF?
I'll put up an example of what I want to plot on the graph.
Lets say a person P1 can reach location L1 using 4 streets (A,B,C,D,E). And these are the routes he can use:
P1->A->C->L1
P1->D->E->L1
P1->E->L1
I want to plot a graph that has P1 at one end, L1 at the other end and all the paths he can take.
Thanks,
Hozy

Hi,
don't think there is such a component
But have a look yourself. We are hosting an online demo:
http://jdevadf.oracle.com/adf-richclient-demo/faces/index.jspx
Select the Ddata Visualization node to see all the graph types we offer
Frank

Similar Messages

How many curves can be plot on one 2D graph in DIAdem

Hi everyone,
I want to plot some(360+) curves on one 2D graph.I have results for samples which are measured at different temperatures.I had no problems to plot the curves of all devices for one temperature.But what I noticed when I tried to plot curves of all devices for all temperatures is that it doesn't work.DIAdem (ver.10.2) gives an error if the number of curves is more than 250,how can this be?Is this a program limititaion which can be fixed with a patch or service pack, or I'm doing something wrong?
Thanks in advance
Solved!
Go to Solution.

Hello fscommand,
When you overlay the axis systems, make sure to turn of the colors for the axes, labels and ticks on the 2nd axis system. You can exactly align them in the "position" tab of the "Axis and curve definition" dialog.
You only need to set this up once for every 250 overlayed curves, so it should be a relatively quick and painless effort.
Let us know if you have any additional questions,
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

How can I plot Data in StripChart using ActiveX in LW/CVI

I have a DAQ with multichannel, I use an external synchronisation and I like to display my Data in RT using CWGraphChart. When I use PlotChartXY I can only plot the width my graph and then it stop (no stripchart possible!!!). But when I make the same with PlotChartY without my external synchronisation, the STRIPCHART works but I have a problem with synchronisation�I hope you understand what I mean. If somebody can help me or send me an example using stripchart with ActiveX, I will be very thank.
Alex

duplicate post, answer here
Bilal Durrani
NI
Bilal Durrani
NI

How can i make a plot in a 3d graph invisible

hello all,
attached is a half-way completed vi which shows how i would make the plot/plots in the 3d graph invisible. unfortunatly i do not know how "item" can refer to the plot i want to make invisible.
any ideas?
Solved!
Go to Solution.
Attachments:
remove plot in 3d graph.vi ‏27 KB

You are almost correct.
The Item input is a string whose value is the name of the target plot. You can view all the plots names from shortcut menu->"CWGraph3D" group->"Properties" item->"Plots" tab ->"Plots" list.
Attachments:
remove plot in 3d graph.vi ‏20 KB

How can I draw two differenct plots at the same graph?

[I am beginner]
I have two different set of data which have differenct x-axis values. How can I draw two data at the same plot?
For example, one data set is
x y
1 3.5
3 2.3
5 1.3
8 3.2
The other
1 2.3
2.5 5.4
4 2.5
If I use m_graph.plotXvsY two times. But it draw only one graph at the same time.
Please let me know. Thank you in advance.

Do you really need the two sets of data on the same plot or is what you really care about is that the two sets of data are in the same graph? If it's the former, then there's not much that you can do since a plot can only contain one set of data. You can append to an existing set of data by calling the corresponding Chart (for example, ChartXvsY) method, but the result is that the plot's data will appear continuous.
If it's the latter, the way to do this is to add multiple plots to the graph and plot each set of data in a separate plot. For example, go to the Plots tab in the graph's property pages, add another plot, then here's some sample code that demonstrates how to plot the sets of data from your example above:
double xData1[] = { 1, 3, 5, 8 };
double yData1[] = { 3.5, 2.3, 1.3, 3.2 };
CNiReal64Vector xDataSet1(4, xData1), yDataSet1(4, yData1);
m_graph.Plots.Item(1).PlotXvsY(xDataSet1, yDataSet1);
double xData2[] = { 1, 2.5, 4 };
double yData2[] = { 2.3, 5.4, 2.5 };
CNiReal64Vector xDataSet2(3, xData2), yDataSet2(3, yData2);
m_graph.Plots.Item(2).PlotXvsY(xDataSet2, yDataSet2);
Hope this helps.
- Elton

How can I plot data from excel in a XY graph

Labview experts,
I have a really simple problem in labview:
I have some data in excel: 2 columns with a certain number data. The two columns are related to each other. So I want to plot all the points in a x y graph. Coordinates point 1: (row1,col1) coordinates point 2: (row2,col2)...
Now i want, in a first step, import this data in labview and draw the X Y graph in labview.
So the points of the first column on the x axis and the data of the second column on the y axis.
that's how i do it now: Attachment
That's only working if i'm using a waveform graph, but i want a XY graph
Is there somebody with a solution,
Kind regards,
Jelle
Attachments:
tryout.PNG ‏9 KB

To setup a plot of XY from dual column data in excel, select the two column including the name header for both column and then select to insert a scatter plot with the points connected by lines and Voila you have a 2 axis plot with x and Y dimensions and including the title for the trace from the column header already formatted for you. If you select more than 2 columns then the first is the X dimension and the remaindre columns all become Y axis traces for multiple plot lines for each column. This is easy folks and basic excel functions for plotting. One the graph is created and displaying the data, clear the data and save as a template. Now when you call the template and stuff the columns of data into the table fields, excel automatically updates the plot and all you have to do after stuffing the data in is save the excel file. Task done. Good luck.

How can I plot a graph in sections???

Hi
This is what I am trying to do:
I have a graph class that uses a double array to plot.. surprisingly a graph. The problem is that the file that I am plotting from is too large to display all of its data at once on the screen.
What I am trying to do is have a forward and back button that will allow you to display a fixed chunk of data at a time.
Also does anybody know how to clone a double array????
Any help would be great...
Cheers...........

Read the file.
Write a funtion to return all values from
starting from start to end like
public double[] getData(int start, int end)
Use the charting tool to plot only the current set of
values.. Change the start and end parameters according to
what the user wants.. (forward or backward)
Try JFreechart... Its an excellent charting tool..

How can I make a palm tree sway?

How can I make a palm tree sway?
I have a palm tree that is a tiff file with alpha. I would like the tree trunk to bend a little and a few of the branches to sway as though it’s gently moving in the wind.
What would be the easiest way to make that happen?
Should I save the trunk and a few leaves as separate elements, and then animate them in motion.
Or is there any way to turn my palm tree into a shape in motion, add edit points and key frames to animate it?
Any advice would be appreciated.
Thanks

Down and dirty: highlight the tree's layer, move the anchor point to the base of the tree, add an Oscillate Behaviour to its Shear X axis. Adjust the Amplitude to 5, Speed to 7 or so, depending on how breezy the day is.

How to Generate Event on change in Plot Legend for XY Graph

Hi,
I have two XY graphs on the front panel and would like to maintain a common plot legend such that any change in the plot legend affects both graphs.
Objective: I would like any value change in plot legend to fire an event.
How do I program that?
I know of value change event for the graph but am unable to find something specific to the plot legend. Other option is to have the user press a "refresh" button that will fire the event.
Feel free to share thoughts on other elegant methods to achieve the same objective.
Thanks,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Hi Sarah,
Looks like you are talking of exactly what I want!
I have attached a sample VI to try achieve what I want. But it still has some issues which are:
1) I am unable to configure a Plot Attribute Change Event. I have used a mouse leave event instead. How does one configure a Plot Attribute Change Event?
2) Is there no single property which will transfer all the settings of plot legend from one graph to plot legend of another graph? In my sample VI, I have to read each property of the master graph and feed it into the slave graph.
Kindly note I am using LV FDS 7.1 on Win2000
Thanks,
Gurdas
Message Edited by Gurdas on 03-27-2006 11:51 PM
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu
Attachments:
Graph_PlotLegend_Event.vi ‏45 KB

How can i write the DOM tree to the XML File?

Asslamo ala mn etb3a Alhoda.
My problem priefly is that i can't write the DOM tree to XML file.
I write following code to give the user the ability to input the name of data base which he want to create.
If i wrote DB name,its atrributes and its values succefully to XML file ,then i'll read it succefully to RAM.
It'll be simple DBMS.
***My code***
import javax.swing.*;
import javax.xml.parsers.*;
import org.w3c.dom.Document;
import org.w3c.dom.DOMException;
import org.w3c.dom.Element;
public class Main {
     * @param args
public static void main(String[] args) {
     // TODO Auto-generated method stub
     String DBname;
DBname=JOptionPane.showInputDialog("Enter Your Data Base Name");
OPerations O=new OPerations();
     O.creatDB(DBname);
class OPerations {
public void creatDB(String name){
     //get an empty Document
     DocumentBuilderFactory f; f=DocumentBuilderFactory.newInstance();
     try {
          builder = f.newDocumentBuilder();
          Document doc= builder.newDocument();
     //Build tree DOM With the root Node
          Element root=doc.createElement(name);
     //add the root element to thevdocument
          doc.appendChild(root);
catch (ParserConfigurationException e) {
     // TODO Auto-generated catch block
          e.printStackTrace();
}

Do an identity transformation to output it:TransformerFactory tf = TransformerFactory.newInstance();
Transformer tr = tf.newTransformer();
tr.transform(new DOMSource(doc), new StreamResult(new FileOutputStream(new File(filename))));(typed without syntax check)

Multi plot cursor in Mixed Graph

If Digital waveform and normal waveform graph is plotted in a mixed graph, and if I choose watch all plots(multi plot) in cursor, LabVIEW closes immediately with an error popup dialog
I have attached the print screen image of that error popup
Attachments:
error.JPG ‏188 KB

Hi Stephen,
           I found a considerable solution to overcome that error.
           Build all the array data at first and then generate digtal
waveform in single instance.
           ie., With number of numerical array data, build a 2D array of
numerical data and make a transpose and then generate a waveform.
           It generates number of digital waveform equal to that of the
column size of 2D Array.
           Do not build generated digital waveforms. This creates an error
while using multi plot cursor--> watch--> All plots.
           I have attached the modified, bug removed Vi with this message for
your reference.
Regards,
Raja
Project Engineer
Soliton Technologies
www.solitontech.com
Attachments:
Mixed Graph Modified without Error.vi ‏25 KB

How do I determine the number of plots on a waveform graph?

How do I determine the number of plots that have previously been plotted on a waveform graph? I am loading dynamic data from a file. If I convert to an array and size it and there is only one plot, I get the number of data points and I don't know how to tell the difference.

Usually by reading the graph terminal or a local of it and determining the first or second dimension (not sure which at the moment) size of the resulting 2 dimensional array. If it is a 1 dimensional array you have either only one plot or an array of clusters each representing one plot. But as these data types are determined by compile time, there shouldn't be a problem with this causing ambiguity.
Rolf K
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How can I plot the 3d plot of a vibrating bridge?

Dear all
My question is as follows:
I want to plot the mode shape of a bridge. Now the deck of the bridge is vibrating, which can be plot. But at the same time; I want to plot the column of the bridge
The question is: when some surface of the 3d plot are vibrating, which means animated plot.How can I plot the stationary multiple curves at the same time.
The attached file is one example, but always the mutiple curves disappear when the surface vibrating.
PS: My VI version is 8.0 How can I save the VI as version 7.x or 6.x, version 8.x seems too new.
Any reply will be appreciated! Many thanks!
Attachments:
format line plot.vi ‏32 KB
3D plot of mode shape.vi ‏33 KB
format 3D.vi ‏31 KB

Sorry,the attached VI should be as follows since there is not data in the array in the previous VI
Attachments:
format surface plot.vi ‏20 KB
3D plot of mode shape.vi ‏31 KB
format 3D.vi ‏27 KB

Can we schedule oo alv tree in background?

hi all
can we schedule oo alv tree in background?
Thanks
venkat

Hi,
We can schedule OO ALV in background.
follow this link ALV Tree in Background
Regards,
Pravin

How to Stack 16 Plots in an 8-Graph Chart

Here's a good one:
I have a stacked chart with 8 graphs. I'd like to display 16 plots on the 8 graphs with each 2 plots overlaid (in different colors). Is there a way to do that?
Fataneh

Hi Fataneh,
Using the "transparent" color you could make one of two charts "see-through"...
- what do you think?
When they give imbeciles handicap-parking, I won't have so far to walk!
Attachments:
overlay.GIF ‏61 KB

Can we plot a unidirectional tree graph in ADF?

Similar Messages

Maybe you are looking for