During LTP material master values need to be modified

Hi ,
We are implementing LTP process in company. while  LTP Run it pick the MRP1234 values for Simulative order creation. We have requirement to change the MRP1234 only during LTP run. Were as the MRP run will run with normal material master(MRP1234) values.
The values need to be changed are during LTP run are MRP group , Lox size etc., '''

Thank you.. Almedia and köller..
  We are already using this badi  MD_MRP_PARAMETERS. We are facing the following problem
For example
header               ATEST
component            BCOMP
We need to switch off the bulk indicator and phantom for the component.
We  are using the above bapi its manipulation only the header (ATEST) material master data but in LTP run during creation of header simulative planned. Component simulative dep requirement values are copied from material master. In this above bapi we are manipulating only header values.
When the next loop during component simulative planned order generation time the above parameters(bulk and phantom) are copied from component simulative dep requirement. Hence the switching of bulk indicator and phantom assembly is not working during ltp using this badi. This problem is happening for multi level components too.
Is there any suggestion for this issue..

Similar Messages

  • Default a check mark in MARC_XCHPF during Create Material Master

    Hi,
    We are changing the field setting for MARC_XCHPF to be mandatory for Material Type HAWA.  Is
    there a way in configuration that the check mark for MARC_XCHPF can be defaulted in during the
    Material Master Creation (example: MM01, MMH1).  Is it configurable in IMG or does it require an
    user-exit.
    Thanks,
    Michelle

    hi
    if you want to make this field default and mandatory for only one material type then you need to choose this field and make it mandatory for this particular type. if you set this one for MM01 then it will be defaulted for all material types. to do this you need to select the field selection  and then find the field and make it mandatory for this material type.
    to achieve this use following path
    img>>>logistics general>>material master>>field selection>>>Maintain Field Selection for Data Screens
    in case of queries revert back
    regards
    Adwait Bachuwar
    Edited by: adwait bachuwar on Feb 24, 2009 9:44 AM

  • Conditional Mandaotry field in Material Master (Suggestion Needed)

    Hi ,
    I am having a requirement where  i need to make a particular field to be mandatory for a certain condition in Material Master.
    Say for a Product Hierarchy i want to make Volume Rebate Group mandatory ( Sales Org 2 View).
    Please suggest the possible solutions for the same.
    No userexit is possible , Screen exit is also out of picture as i will not get the value of second variable -
    Thanks
    Rajiv

    Hi Rajiv,
    there is a user-exit that can be used .. MGA00001.
    We use it to make some plausibility checks before saving a material and also some additional authorization checks.
    <pre>FUNCTION EXIT_SAPLMGMU_001.
    ""Lokale Schnittstelle:
    *"  IMPORTING
    *"     VALUE(WMARA) LIKE  MARA STRUCTURE  MARA
    *"     VALUE(WMARC) LIKE  MARC STRUCTURE  MARC
    *"     VALUE(WMARD) LIKE  MARD STRUCTURE  MARD
    *"     VALUE(WMBEW) LIKE  MBEW STRUCTURE  MBEW
    *"     VALUE(WMLGN) LIKE  MLGN STRUCTURE  MLGN
    *"     VALUE(WMLGT) LIKE  MLGT STRUCTURE  MLGT
    *"     VALUE(WMVKE) LIKE  MVKE STRUCTURE  MVKE
    *"     VALUE(WSTAT) LIKE  MGSTAT STRUCTURE  MGSTAT
    *"     VALUE(WMFHM) LIKE  MFHM STRUCTURE  MFHM
    *"     VALUE(WMPOP) LIKE  MPOP STRUCTURE  MPOP
    *"  TABLES
    *"      STEXT STRUCTURE  SHORT_DESC
    *"      SSTEUERTAB STRUCTURE  MG03STEUER
    *"      SSTEUMMTAB STRUCTURE  MG03STEUMM
    *"      WMEINH STRUCTURE  SMEINH
    *"      SMEAN_ME_TAB STRUCTURE  MEAN
    *"  CHANGING
    *"     VALUE(CMARA) LIKE  MARU STRUCTURE  MARU
    *"  EXCEPTIONS
    *"      APPLICATION_ERROR
      INCLUDE ZXMG0U02.
    ENDFUNCTION.</pre>
    Just prompt an error message in case the required field is not filled.
      MESSAGE ennn(xx) RAISING application_error.
    I am sure it will help to solve your problem.
    Best regards
    Ferdi

  • Error when replicating material master - Value not permitted for PO Unit

    Hi all,
    I am having the following issue. I am trying to replicate material master from ECC 6.0 to CRM 5.0, but I am getting an error to which I am not being able to find the solution:
    Value GFO is not permitted for attribute Purchase Order Unit
        Message no. COM_PRCAT020
    Diagnosis
        You want to specify that the value GFO is allowed for the attribute Purchase Order Unit. However, in attribute maintenance or in the
        higher-level category ('parent category'), you specified that the value GFO is not allowed for this attribute.
    I tried to find where to edit this attribute in Customizing, and also in tcode COMM_ATTRSET, but I have no idea if this was the right direction.
    Has anyone faced this issue before? I would really appreciate any help, since this is preventing me from completing material replication.
    Thanks in advance.
    Best regards,
    Joã

    Hello Sudipta,
    I checked the attribute in COMM_ATTRSET, but there aren't any specific values for it. There is a value table T006, which I believe is standard, and it contains UoM GFO.
    With this being the case, the error I'm getting makes even less sense to me...
    Can you tell me if in there is any other place in CRM where we can set UoM?
    Thank you, once again.
    Regards,
    Joã

  • Is material master knowlwdge needed

    Dear All,
    Would u clarify me that while i am begining my career in mySAP MM module , will it be necessary for me to learn and get working knowledge of Material Masters?
    Regards,
    Deepak Andhale

    Hi DFeepak,
    You learn about material master at this link http://help.sap.com/saphelp_47x200/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
    But,before joining you need not to have deep knowledge,if you are joining any course they will train you on all topics.
    All the best,
    WIth Best Regards,
    Rajesh

  • Material Master Value

    Hi
    The requirement is if along with PO value, the non deductable tax value also to be added in the material cost. that should be updated in Fi doc...
    Pls advice how to do this.
    I hv done these..In SPRo Conditions Hv created a condition type, Calculation schema, Schema Determination, Schema Group, and assign this to vendor.. n i created a PO, and then MIGO...
    Regards
    Ram

    Hi
    Any idea?
    Ram

  • Copy of Batch characteristics value from material master to Batch

    Hi Gurus,
    I have maintained some values in the characteristics under batch classification in material master and want to copy the values in batch characteristics during batch creation at process order release.
    Can any one help me to achieve this in standard way?
    Thanks
    Sandip

    Hi,
    Try to understand the batch classification functionality...In batch classification characteristic values changes from batch to batch...Values should not be maintained in the material master...it does not have any meaning...in the material master we need to assign only the batch class with class type 023 in classification view ...no need to assign the values there....Batch classification means characteristics values differs from batch to batch...
    Thanks
    Kumar 

  • Usage of MDM's material master relevant XI Content and Business Content

    Dear all,
    In MDM's material-relevant XI content, there's a message interface "MDMMatmasIn". But in the demo system this interface is not used to write material master data to file. The IDoc type MATMAS.MATMAS05 is used instead. No mapping is used. May I ask why?
    I tried the 00_MATMAS05_R3.map file and can import file in the format of MATMAS.MATMAS05. But some value mappings are not done and have to be added manually. Do I miss precedent steps?
    In MDM Business content, there're lots of import map files like 00_MATMAS05_R3.map and 03b_Units_SAP_R3.map. During the data consolidation procedure, should we just use one map to import the IDoc-XML file? Shouldn't we first use other map file to fill the lookup tables? If not, what are those map files used for? Is there any document about the usage of those map files?
    Very sorry for asking so many questions. I'm very new in this area and desperately need help...
    Best Regards
    Jerome

    Hi Christiane,
    Thanks for the document. But I didn't find how  to import the customization data into the lookup tables. For example, in the MDM standard business content, the "Material" repository contains a lookup table "Material Type". It doesn't contain the values like "ROH" and "HAWA". How can we fill such tables?
    And the standard map "00_MATMAS05_R3" doesn't automatically add such values into lookup table by value mapping. When I tried to import a material master, I had to manually modify this map. Is there any solution to this problem?
    Best Regards
    Jerome

  • Uploading Basic Data Longtext into Material Master

    Hi Experts,
    While creating material master i need to upload Basic Data Long text into material master.
    For this iam using a BDC.How we can get this long text into sap systen and how we will update in material master.

    Hi,
    you can use the below function module instead of Save_text..
    BAPI_MATERIAL_SAVEDATA.
    in the above function module
        headdata-material = matnr.
        CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
          EXPORTING
            headdata             = headdata   "contains materail number
          IMPORTING
            return               = return
          TABLES
            MATERIALLONGTEXT = t_longtext   "pass long text here
            returnmessages       = returnmessages.
    Prabhudas

  • Document is not capured from material master to PO

    Hi Gurus
    I created a material in the material master. In the additional data, i have attached the PDF drawing of the material and i have save it.
    Say Material Shaft was created.
    Then i created Purchase order for the material Shaft. In PO i am not able to get the PDF which i stored in material master.I need to send the drawing along with the PO.
    What i have to do ?
    - Pithan
    Edited by: Pithan Pithan on Feb 5, 2009 5:02 PM

    hi Pramod
    Thank you for your reply
    For material X , i have created a Document in CV01N and released it. in the object link - material master, i have attached the X material.
    when i am creating a PO (ME21N), i gave a material 'X'. selecting the PO item and clicking documents icon below that, i didn't find any document, but when i manually enter the document, it is attached..
    I need to know, the document is attached to the material master, when creating the PO, it has to pick the document...
    I am asking why its not picking it... ?
    - Pithan

  • Create a specific user profile to Material master data

    Dear colleagues.
    We need create on R/3 4.6 a specific user profile for material master data, to create or modify (MM01/MM02) only the following views: 'Sales org. data 1', 'Sales org. data 2' and 'Sales:General/Plant data'. The problem is that when I use the SAP gui functions, I can create the profile, but also with the views 'Foreign trade: Export data' and 'Sales text'. Someone know how create this profile without this last two views? Thanks.

    See:
    http://technet.microsoft.com/en-us/library/cc262327(v=office.15).aspx#create
    And a more complex, in-depth example leveraging MMS:
    http://www.sharepointsteve.com/2010/10/making-custom-user-profile-properties-searchable-in-sharepoint-2010/
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Attachment in material master

    When maintaining the material master, we need to attach documents/pix related to the material. I already tried:
    - Basic data 1, GOS icon
    - System \ Service for Object
    But the icon is disabled. Please help!

    Hi
    do u want to send the doc to the customer
    when u create a PO. enter the material... select the PO item no and bottom of the item overview tab.. there are many icons...
    select the LINK TO DOC... there you can attach the docu
    IMP - this can be done, if u have created the doc in DMS
    - Pithan

  • Where I can store tariff code in material master

    Hi,
    I am wondering if you also know whether SAP material master is able to store tariff code.
    This tariff code is use by the custom department to keep track of their material code.
    Any clue?
    Thanks.
    tuff

    Hi,
    The Customs Tariff Prefs are maintained in Foriegn Trade View in material master.It needs a pre-config of Foreign Trade/Customs in MM.
    Regards,
    Patil

  • Inventory Value-Material master

    There is a field Inventory value below both co.code currency and Group currency in the material master Accounting 1 view..
    I am in need of getting the value in a report for materials..
    i manage to get the value of Inventory value below co.code currency(From MBEW table) but what about the same below group currency..
    PLease help me out.
    Karthick P

    I think this is just a calculated figure during runtime based on conversion rates maintained.

  • Copy of Material Master charac. values to the batch classif. in GR for PO

    Dear gurus,
    Could you please help me with the following issue. I have a material managed in batches, and it has a classification type 023 in material master. I fill one chaacteristic of this classification with some value. Now I want this value to be copied to the batch classification during the creation of new batch while making GR to production order.
    Is it possible?

    Hi Nikolaj,
    What I am understand your requirement is like,
    You want to fetch the value of Characteristic maintain in Batch class in Material master to the Batches, correct?
    But my Friend if you maintain value of characteristic in Batch Class in material master then it will works as a validation.
    For Example,
    Suppose your Characteristic is Colour and in Material Master Batch classification view you have maintain value as Red.Then system will not allow you any other colour in Batches.You will find that value in Drop Down list.
    Regards,
    Dhaval

Maybe you are looking for