Can we post data 32KB using utl_http package?

I was using utl_http package for posting http data. Now there is a change in requirement and I have to call a web service instead of normal http post. Also the amount of data to be transferred now is >32KB (previously it was only 16KB). I have to manaually create the SOAP message and post it as http requset. Is it possible to post data more than >32KB using the utl_http package?
-Kumar
Message was edited by:
user586950

did a trace route and this is what it came out with
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Moroni>ping 64.124.140.30:9090
Ping request could not find host 64.124.140.30:9090. Please check the name and t
ry again.
C:\Documents and Settings\Moroni>tracert 64.124.140.30:9090
Unable to resolve target system name 64.124.140.30:9090.
C:\Documents and Settings\Moroni>tracert 64.124.140.30
Tracing route to 64.124.140.30.mfnx.net [64.124.140.30]
over a maximum of 30 hops:
1 13 ms 15 ms 33 ms 73.91.188.1
2 9 ms 11 ms 9 ms GE-2-45-ur01.troutdale.or.bverton.comcast.net [6
8.87.218.185]
3 * 12 ms * te-9-3-ar01.troutdale.or.bverton.comcast.net [68
.87.216.89]
4 39 ms 13 ms 16 ms 12.116.25.33
5 17 ms 17 ms 18 ms tbr1011401.st6wa.ip.att.net [12.122.111.6]
6 17 ms 15 ms 16 ms 12.122.86.41
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * *

Similar Messages

  • How can we post data from CRM to SAP using ABAP proxies???

    Hi ,
      Can anyone hep me to create interface for the following scenario How can we post data from CRM to SAP using ABAP proxies???, can I find any document ???????
    Thanks in advance
    Andy

    Andy,
    Please look at these weblogs.
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    /people/ravikumar.allampallam/blog/2005/03/03/creating-purchase-order-idoc-through-xi
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    These should give a good idea about implementing Proxies.
    Regards,
    Ravi

  • How can I POST data within the same page if I have a A HREF -tag as input?

    How can I POST data within the same page if I have a <A HREF>-tag as input? I want the user to click on a line of text (from a database) and then some data should be posted.

    you can use like this or call javascript fuction and submit the form
    <form method=post action="/mypage">
    cnmsdesign.doc     
    </form>

  • Error while invoking webservice using UTL_HTTP package

    Hi All,
    I am invoking a webservice (SOAP Request) from a PL/SQL block using UTL_HTTP package.
    I am able to send the complete request and am getting the required instance on the BPEL Console, but the process is errorring out while getting response back.
    and the PL/SQL Block is ending in error mentioned below:
    ERROR at line 1:
    ORA-29266: end-of-body reached
    ORA-06512: at "SYS.UTL_HTTP", line 1321
    ORA-06512: at "APPS.CSM_BPEL_TEST_PKG", line 34
    ORA-06512: at line 1
    Can anyone let me know what is the cause of this.
    Thanks in advance

    My guess would be that your request is not properly constructed,
    29266, 00000, "end-of-body reached"
    // *Cause:  The end of the HTTP response body was reached.
    // *Action: If the end of the HTTP response is reached prematurely, check if
    //          the HTTP response terminates prematurely.  Otherwise, end the
    //          HTTP response.John

  • Problem in Using Utl_Http package

    Hi to all,
    I'm trying to send the sms(Short Message Service) using utl_Http package. When I'm trying to run a sql statement like
    SELECT utl_http.request('http://www.oracle.com/index.html') FROM dual
    I'm getting an error message like this.
    The following error has occurred:
    ORA-29273: HTTP request failed
    ORA-06512: at "SYS.UTL_HTTP", line 1577
    ORA-12545: Connect failed because target host or object does not exist
    ORA-06512: at line 1
    Pls help me to solve this problem.
    Regards,
    Alok Dubey

    Thank you for ur reply. Infact my database was not able to access the internet. currently, it is working fine.
    I'am using this code. It's works well.
    CREATE OR REPLACE PROCEDURE Send_Sms_Http
    AS
    text_str VARCHAR2(5000);
    V_Message VARCHAR2(200) := REPLACE('This is a DEMO SMS sent to u on '||TO_CHAR(SYSDATE,'DD/MM/RRRR HH12:MI:SS AM'),' ','%20');
    text_sms VARCHAR2(5000) := 'http://hapi.smsapi.org/SendSMS.aspx?UserName=xxxx&password=xxxx&MobileNo=xxxx,xxxxx&SenderID=xxxx&CDMAHeader=xxxxx&Message='||V_Message;
    BEGIN
    text_str := utl_http.request(text_sms);
    Dbms_Output.Put_Line('text_str = '||text_str);
    EXCEPTION
    WHEN OTHERS THEN
    Dbms_Output.Put_line('Error in sending the message'||SQLERRM);
    END;
    Regards,
    Alok Dubey

  • When I click "share" icon for Facebook, ensuing popup windw unstable. pops up then gone, cyclically,won't stop until I close originating tab/website. can't post FB unless use Safari. Mac OS 10.6.8. Tried to post pic wouldn't work

    When I click "share" icon for Facebook, ensuing popup windw unstable. pops up then gone, cyclically,won't stop until I close originating tab/website.pop up blocker off & in safe mode. can't post FB unless use Safari. Mac OS 10.6.8. Tried to post pic wouldn't work

    O.k. Thanks for the clarification. I poked around in my TimeCapsule router's settings (TimeCapsule is an Apple Airport Extreme router with attached hard drive for wireless backup/storage). Unfortunately, it doesn't look like I can disable multicasting with the TimeCapsule. I can change the multicasting 'rate'. Settings are Low, Medium, High. It's currently set to Low.
    I did a few web searches, and found an Apple.com article: <http://support.apple.com/kb/HT3789?viewlocale=en_US> which explained how to disable Bonjour Service Advertisements. I believe this is the same thing as 'Multicasting'. The process is a modification of "/System/Library/LaunchDaemons/com.apple.mDNSResponder.plist", and a restart of the Mac is required afterwards.
    I'm a bit concerned that disabling multicasting will interfere with my AppleTVs and iTunes music sharing, but I may try it next time I'm up for a computer workout. This task will require editing of system preference files, could require multiple restarts, might interfere with my AppleTVs, could interfere with my iTunes file sharing, doesn't have a documented relationship to my problem.
    This is way to difficult for something that should just work. Did you say you had read something about a relationship between this bonjour multicasting and smb connectivity? If it was online could you post the link?
    I'm currently able to connect to the drive using NFS, but I have to manually configure that connection each time I reboot (can't get the 'Disk Utility' configured to do it automatically). While it's working with NFS, it's not my preferred connect method (for various reasons).

  • How to perform authentication on proxy using utl_http package?

    Hi,
    I am using Oracle 8i database (ver:8.1.7). I want to use the utl_http package to perform http requests. Within my company, I am forced to use a proxy and I have to be authenticated on that proxy. How can I authenticate myself on the proxy using utl_http.request function on Oracle 8i?
    Thanks a lot.
    Paulo.

    UTL_HTTP
    The UTL_HTTP package makes Hypertext Transfer Protocol (HTTP) callouts from SQL and PL/SQL. You can use it to access data on the Internet over HTTP.
    With UTL_HTTP, you can write PL/SQL programs that communicate with Web (HTTP) servers. UTL_HTTP also contains a function that can be used in SQL queries. The package also supports HTTP over the Secured Socket Layer protocol (SSL), also known as HTTPS, directly or through an HTTP proxy. Other Internet-related data-access protocols (such as the File Transfer Protocol (FTP) or the Gopher protocol) are also supported using an HTTP proxy server that supports those protocols.
    When the package fetches data from a Web site using HTTPS, it requires Oracle Wallet Manager to set up an Oracle wallet. Non-HTTPS fetches do not require an Oracle wallet.
    See Also:
    Chapter 102, "UTL_URL"
    Chapter 100, "UTL_SMTP"
    Oracle Advanced Security Administrator's Guide for more information on Wallet Manager
    This chapter discusses the following topics:
    UTL_HTTP Constants, Types and Flow
    UTL_HTTP Exceptions
    UTL_HTTP Examples
    Summary of UTL_HTTP Subprograms
    http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/u_http.htm#ARPLS070
    Joel P�rez

  • Control the Post Date  when use BAPI_OUTB_DELIVERY_CONFIRM_DEC to PGI !

    Dear all,
       How can I control the Post Date (WADAT_IST) when I use BAPI_OUTB_DELIVERY_CONFIRM_DEC to PGI?
    Thanks to help me.

    In ECC 6.0, I used this BAPI to perform the picking using this way:
    1. Implement enhancement point  BAPI_OUTB_DELIVERY_CONFIRM_D01 in enhancemnt spot ES_SAPLV50I to set the update picking flag on delivery control structure.
    GS_DLV_BAPI_CONTROL-UPDATE_PICKING = 'X'
    2. Implement enhancement of standard BADI SMOD_V50B0001. Use method EXIT_SAPLV50I_004 to loop at table CT_VBPOK and update the fields VBELN and POSNN with suitable values.
    There is one problem with this solution, though.  The delivery quantity cannot be updated.  Any increase in the delivery qty ITEM_DATA-DLV_QTY actually updates the picked quantity on the delivery.  Consequently, there is little practical use of this technique.
    John

  • Error while using utl_http package

    Hi Guys,
    I need some help with the utl_http package
    The problem that Iam facing is as follows :
    Iam trying to use the Oracle provided package utl_http
    package to send an http request to a particular
    website.However Iam getting the request_failed
    exception.
    I type in the foll.command in sqlplus:
    select utl_http.request('http://www.oracle.com') from
    dual
    and I get the foll.error---
    ERROR at line 1:
    ORA-06510: PL/SQL: unhandled user-defined exception
    ORA-06512: at "SYS.UTL_HTTP", line 174
    ORA-06512: at line 1
    If I try and trap the exception it shows
    request_failed exception.
    If any one has any clue on how to resolve this -- >please reply ASAP .
    Thanks

    Is it possible that your database sits behind a firewall? If so, you need to specify the proxy in utl_http.request.

  • How can forbid changing data when using BAPI  'BAPI_MATERIAL_SAVEREPLICA'?

    I am using BAPI  'BAPI_MATERIAL_SAVEREPLICA' to creat material master data in batch.
    But this BAPI also can be used for change mode.
    How to forbid the change of MAT data when use this BAPI?
    TKS a lot~~
    I am looking foward to your response~~~

    you have to find out what the user did before your program goes ahead and starts the BAPI.

  • How can forbid changging data when using BAPI  'BAPI_MATERIAL_SAVEREPLICA'?

    I am using BAPI  'BAPI_MATERIAL_SAVEREPLICA' to creat material master data in batch.
    But this BAPI also can be used for change mode.
    How to forbid the change of MAT data when use this BAPI?
    TKS a lot~~
    I am looking foward to your response~~~
    Edited by: lorryhappy on Dec 22, 2009 11:35 AM

    Hi
    You can achieve it in another way..
    Before Passing Data to BAPI , Check whether the material is existing or not..
    If material is existing (Present in Material Master Tables e.g. MARA ) using
    data: l_matnr like mara-matnr.
    Select single matnr from mara into l_matnr.
    IF sy-subrc EQ 0.
    " Material is existing ==> Do Not Pass to BAPI
    else.
    " Material is NOT existing ==> Pass to BAPI for creation.
    endif.
    Repeat above logic for every material in batch..
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7
    ilesh Nandaniya

  • Can UD Posting Date be changed?

    Dear All,
    While doing UD , we have put the UD Posting date as 01-01-2007, while the actual UD Date is 01.12.2006.
    Now the Material needs to be issued to the Production Floor in the month of December. Since the UD Date is 01.01.2007, we are not able to issue the Material in the month of December.
    Is there any way to CANCEL the Production Order if UD is done or is there any other alternate to RE-POST the Material in the Month of December, so that Material can be issued.
    Thanks & Regards,

    Hi Kam,
                 When the process order is confirmed the movement 101 take place for the header level material for which the Process order is created & 261 for the item level material.
    Now when the usage decision is done movement type 321 takes place for the header material to move it from quality to un-restricted.
    To correct your error what I suggest is first cancel the order which will
    reversed the 261 goods movement (consumption of raw materials) for that order but it couldn’t do that 321 reversal (goods receipt reversal) 
    The reason that made this was that the usage decision was made for the order that is the finished goods are moved from quality to unrestricted, reversal of 321 tries to find the material in quality stock but that has been moved to unrestricted.
    Now  cancel the inspection lot & create a new inspection lot ,
    do the result recording  & UD once again against the new inspection lot.
    I hope this will solve your problem ..... in case u have any further query then let me know ....
    Pls reward the points if you find it helpful
    Thanks
    Kaushik

  • When can system post data to dummyprofit center

    Hi
         i have doubt about dummy profit center.no where we assign dummy profit center ,but system posts data to dummy profit centers how it is possible,can any body resolve my doubt pls........
    regards
    prasad

    Hi Prasad,
    The profit center should always derive from the CO object to which
    you posted. If the object has not been assigned to a profit center,
    the assignment is automatically made to the dummy profit center.
    The overwritten of the entered profit center may be caused by
    the profitability segment assigned to it during the entry. If there
    is more than one account assignement involved, the system will always
    derived the profit center from CO-PA. If PA is not assigned with a
    profit center, the dummy will be assigned to it instead.
    I will try to explain you the logic how ProfitCenter will be derived
    because of balance sheet and P+Laccounts.
    P+L account:
    If the account is a cost element amounts will be posted online to
    EC-PCA.
    If it is not a cost element and you enter at the posting e.g.
    FB01 a Profit Center exactly on this one will be posted in EC-PCA. If
    there is no entry in the posting (field ProfitCenter is empty) the
    system checks if this activity is relevant (programmed at the coding).
    If yes the system searches for entries in trx 3KEH. Is there no entry
    for the account the DUMMY will be posted. If there is an entry the
    system checks checks if there are entries in trx 3KEI. Are there entries
    the default-Profit Center is derived, if there are no entries the
    Profit Center from trx 3KEH will be derived.
    If the activity is not programmed the system checks the entries in 3KEH.
    Are there ones, then again 3KEI is checked (entry in 3KEI -> this Profit
    Center is taken, otherwise the one from 3KEH). Is there no entry in 3KEH
    the position is not relevant for EC-PCA.
    Balance Sheet Account:
    If you enter at the posting e.g. FB01 a Profit Center the system checks
    wether there is an entry in 3KEH or not. If yes this Profit Center will
    be derived. If there is no entry the Position is not relevant for PCA.
    If you enter at e.g. FB01 no Profit Center the system checks again if
    there is an entry in 3KEH or not. If no the position won´t be relevant.
    If there is an entry checks 3KEI. Is 3KEI filled with a rule the derived
    Profit Center is posted. When 3KEI is not filled then the entry from
    3KEH will be posted.
    Please review the attached relevant notes:
    392273     When is validation/substitution called?
    201897     Info: Validatn/substitution for CO-internal postng
    Regards,
    Abhisek

  • Can't post to Craigslist using iPhone?

    Seems you cant post to Craigslist using iPhone. All go's well until your asked to enter the "Verification Word" which is not an option with the iPhone. Does this have something to do with the lack of Jave or something. It's no big deal I'm just curious.

    Zerimar,
    It appears to use Javascript, not Java.
    Make sure the Javascript option is turned on in Settings->Safari.
    Hope this helps,
    Nathan C.

  • Getting ora-04030 out of process memory using utl_http package

    Hi,
    Using oracle db v9 on aix. I run an extract (pl/sql package) which processes about 50,000 records. When processing gets to about record 45,500 ora 04030 error is reported when calling utl_http.get response or utl_http.read_text. Only have this problem after about 45500 records prcoessed.
    Can anybody help?

    donl wrote:
    Hi,
    Using oracle db v9 on aix. I run an extract (pl/sql package) which processes about 50,000 records. When processing gets to about record 45,500 ora 04030 error is reported when calling utl_http.get response or utl_http.read_text. Only have this problem after about 45500 records prcoessed.
    Can anybody help?04030, 00000, "out of process memory when trying to allocate %s bytes (%s,%s)"
    // *Cause:  Operating system process private memory was exhausted.
    // *Action:
    [oracle@localhost ~]$

Maybe you are looking for

  • Activation of the Batch management check in the Material master

    Dear All, Here I have one query Can we able to activate the Batch management check in the material master-->Purchaging view or not, if we have open or completed sales documents and deliveries for that materail. Reply ASAP Regards, Murali.

  • Showing external pages in Dreamweaver 4

    Hello all, I am new to this forum as well as Dreamweaver and site building. I have the DW4/FW4 studio on windows xp. I am able to access all of the pages on my website except for the forums (which are php) and the photo gallery (which is coppermine).

  • Sequences in order - 10g r2 RAC

    Hello, we have a j2ee application against Oracle 10g r.2, which uses sequences (over ten approximately). These sequences are used to assign automatically value to the primary key of registers of several tables. In production environment, we have RAC

  • Safari 5 URL bar searches page title in addition to URL

    I just upgraded to Safari 5. Now whenever I start typing a URL in the URL bar, it gives me suggestions based on the page's title in addition to the page's URL. I want to disable this new "feature" and go back to the old functionality where it only su

  • IPhone Aspen Simulator not working

    I recently downloaded the iPhone SDK and I am trying to follow through the MoveMe tutorial. However, when I build and run the app, Aspen launches, but nothing appears on the simulator screen. I figured that I needed to turn it 'on', but clicking on t