Can we rename the existing z-program in SAP-abap

Can we rename the existing z-program in SAP-abap. If yes, than how it can be done. But actually we don't want to copy the code from the existing z-program to the new one which will be created. We just want to make rename the existing z-program in SAP-abap. Please suggest, how it can be?
Edited by: akg.amit on Oct 20, 2010 7:40 AM

Hi Amit,
In SE38 Open the program with old name. Press the RENAME button. In the Target program field provide the new name of program name. This new name for program should not exist in your system. Click on the Rename button. It will give a pop-up where it ask if you want to rename any includes in that program. I assume you dont have any includes in the program. So press the Rename button again without selecting the "Include" check box. Now it will ask for the Transport request. Provide your Transport request number. The program will be renamed.
Regards,
Immanuel.

Similar Messages

  • Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't  reinstall the 2 missing programs. I want to install the softwares, therefore I down

    Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't  reinstall the 2 missing programs. I want to install the softwares, therefore I download those from here.  The downloaded program refuse to accept the serial number which was given to the school when they purchased the Master Collection CS4 MLP A00. Thank you for your help, in advance.

    Hi Jeff,
    Thank you. I am a little bit busy at work, sorry for the delayed reply. I tried to solve the problem, but it still exists. The 3rd of the Adobe disk is damaged someway. I tried to run on my mac at home and it has a failure. So I think we have no other choice that to download the full pack of master collection. I had a discussion with the IT expert and he figured out that company does not exist any more from where they purchased the Adobe Master Collection for Mac and PC. So If you would be kind to help me, what kind of information ID or any kind of document would be needed to identify the purchaser institute (us). I don't think any of us has an account at the Adobe. I will try to figur out. I desperately need to replace Photoshop and InDesign as without them it's really harsh to teach the kids fot the graphic design.
    Sincerely yours.
    Peter

  • Not able to rename the existing file

    Hi All,
    I have a java file Test.java in which i am doing the following stuffs.
    1) I am creating a new file
    2) Entering contents in the existing file
    3) Renaming the existing file--When i am doing this i am not getting any error but the existing file is not renamed
    The contents of the file Test.java*************************
    package com.fidelity.ereview.utils;
    import java.io.*;
    public class Testing {
         public static void main(String[] args) throws IOException {
              File f = new File("D:/TCS/myfile1.txt");
              f.createNewFile();
              System.out.println("new file " + f + " is created");
              FileOutputStream fileobj = new FileOutputStream(f);
              DataOutputStream writeInsideFileObj = new DataOutputStream(fileobj);
              writeInsideFileObj.writeBytes("sunita");
              writeInsideFileObj.writeBytes(",");
              writeInsideFileObj.writeBytes("choudhury");
              File f2 = new File("D:/TCS/myfile2.csv");
              f.renameTo(f2); **// renames the file HERE The file is not renamed**
    Kindly anybody help me....

    import java.io.*;
    public class Testing {
    public static void main(String[] args) throws IOException {
    //File f = new File("D:/TCS/myfile1.txt");
    File f = new File("D:/TCS/myfile2.csv");//above replaced by
    f.createNewFile();
    System.out.println("new file " + f + " is created");
    FileOutputStream fileobj = new FileOutputStream(f);
    DataOutputStream writeInsideFileObj = new DataOutputStream(fileobj);
    writeInsideFileObj.writeBytes("sunita");
    writeInsideFileObj.writeBytes(",");
    writeInsideFileObj.writeBytes("choudhury");
    writeInsideFileObj.close();//I added
    fileobj.close();//I added
    //File f2 = new File("D:/TCS/myfile2.csv");
    //f.renameTo(f2); **// renames the file HERE The file is not renamed**
    }Why create a file add data to the file and then rename to change the file type?
    You can add data to any file type with java.

  • Can we rename the database name in oracle 10g

    Hi,
    Can we rename the database name in oracle 10g.
    Please help

    Yes as already said, using DBNEWID Utility can renamed the database name.
    You can also take a look at the Oracle Metalink Note:429674.1 (Which was written by me) - Subject: How We Used the Oracle DBNEWID Utility to Change the Database Name
    Regards,
    Sabdar Syed.

  • I can not download the Adobe Acrobat program.

    I can not download the Adobe Acrobat program. The following message is displayed:
    "Language / not supported platform.
    adobe acrobat is not available in your language or platform. For a list of supported platforms and languages, click here. "I tried it in Spanish, English French and Italian, and always the same message.
      What can I do?

    You can try downloading from: http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
    As "Test Screen Name" said, Vista isn't officially supported, it is quite possible you face further problems down the road.

  • When I opened iweb it opened as a file I deleated. I have a published website with godaddy and would like to update. How can I open the existing iWeb app to the site that is already published?

    When I opened iweb it opened as a file I deleated. I have a published website with godaddy and would like to update. How can I open the existing iWeb app to the site that is already published?

    You cannot retrieve the already published site as iWeb CANNOT open it - it has no import facility.
    You need your domain.sites file, which you can find under User/Library/Application Support/iWeb/domain.sites.  You do not need any kind of account for this because it is your domain.sites file that resides on the hard drive of your Mac anyway.  Find this file and you can alter your website.
    Use a spotlight search to try and find it and if this does not work you can download something called Find Any File.  If you really can't find it, then you'll have to start from scratch because iWeb cannot open a site that is already published.

  • How to rename the existing project in NetWeaver

    Hi All,
    Please let me know the process of how to rename the existing project in NetWeaver.

    Hi,
        If you want to rename Development Component (DC) project, here is the procedure..
    How to rename local Development Component Projects in Netweaver Developer Studio
    Regards,
    Uday.

  • Why does I can't install the FORM6I DEMO program

    Hi :
    Why does I can't install the FORM6I DEMO program?
    Environment:WINDOWS98 ORACLE 817 single machine version FROM6i
    The FORM6i installs in the :D:\ FORM60
    The ORACLE817 installs in the D:\ORACLE 817
    While installing the DEMO, always hint is not an ORACLEHOME catalogue, two catalogues can't all install.
    Please the help!

    Hi Mountain Matt,
    Please make sure that you're logged in as an administrator, and that any antivirus software on your system is disabled. Then, trying downloading Acrobat from Download Acrobat products | Standard, Pro | XI, X, and run the installer.
    Please let us know how it goes. If you're still having trouble and need additional help, it will be very helpful to know what version of Windows you're using.
    Best,
    Sara

  • I'm trying to extend my wifi network with time capsule but it can't find the existing wifi network

    I'm trying to extend my wifi network with time capsule but it can't find the existing BT wifi network even though it is there with a good signal strength. The Time Capsule is connected to a Netgear router via ethernet.

    You will need to start over on the setup of the Time Capsule as follows:
    Disconnect any Ethernet cables that might be connected to the Time Capsule, but leave it powered on
    Hold in the reset button on the back of the Time Capsule for 8-10 seconds and release. The reset button is located next to the AC power socket.
    Allow a full minute for the Time Capsule to restart to a slow, blinking amber light
    Connect the Ethernet cable from a LAN <--> port on the Netgear to the WAN "O" port on the Time Capsule.  The Ethernet cable must remain connected at all times.
    Click the WiFi icon at the top of the Mac's screen
    Look for a setting of New AirPort Base Station
    Click on Time Capsule
    The example below shows an AirPort Express. You will see Time Capsule on your screen.
    That will get the setup wizard going. It will take a minute to analyze the settings, then display a screen that looks like this, except you will see a picture of the Time Capsule
    Network Name..........Type in the exact name that the Netgear wireless is using
    Base Station.............Type in a name that you want to call the Time Capsule.  Use something short and simple. Mine is TC, for example
    Password..................Type in the exact password that the Netgear wireless requires
    Verify.........................Verify the Password again
    Click Next
    The setup wizard will configure everything for you automatically.  When you see the message of Setup Complete, click Done.
    That's it.  Now you have one big "extended" network.  Technically, this is called a "roaming" network.

  • Can you rename the destops in the misson control

    Can i rename the destops rather than having dashboard, destop1, destop2 etc. Can i name the destop1 to something else?

    I don't know if you could do something about my next sugestion but here it goes:
    It would be nice if I could enter the code in the following way:
    $muploadHelper = new tNG_MuploadHelper("../../../", 32);
    $muploadHelper->setMaxSize(5000);
    $muploadHelper->setMaxNumber(0);
    $muploadHelper->setExistentNumber(0);
    $muploadHelper->setAllowedExtensions("gif, jpg, jpe, jpeg, png");
    $muploadHelper->setUploadButtonTxt('Upload Images');
    where "setUploadButtonTxt" would be a new command offcourse.
    Any thoughts? I would hate to have to reinvent the wheel myself.
    Thanks

  • I can't open the Oracle JiInitiator program v1.3.1.28

    Hi
    After installing the Firefox V3.6.10 , I can't open the Oracle JiInitiator program v1.3.1.28.
    Please note that, the Oracle JiInitiator program v1.3.1.28. Was installed and running normal on windows explorer 8?
    So please help me
    Thanks
    Essam

    When you updated to Mavericks and qualified for the free iWork apps and then installed them, the old iWork apps were rounded up and put into a folder name iWork' 09 and the three new versions of the apps are scattered in the apps folder in alphabetical order.

  • Given a workflow where can we see the BORs and programs invoved in it

    Given a workflow where can we see the BORs and programs invoved in it.

    Hi Kittu,
    Go to PFTC:
    Ex:
    Task Type: Workflow Template
    Task : 20000040
    Go to triggering Events here you can find BO.
    Inside BO u can find Program.
    Thanks and Regards,
    Prabhakar Dharmala

  • Can´t install the photoshop photography program

    Hallo!
    I can´t install the photoshop photography program on my imac. I can sign in to the website and my account, but when I try to install the program, my adobe id is not working. Tried  to set my firewall off but it´s not working anyway...
    /Jenny

    Jenny if you are being prompted to enter a password during the install process then it is likely you are being asked to enter your adminstrator.  You can find more details on how to install the Adobe Creative applications included with your membership at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • Can we see the existing schemas in OID

    Can we see the existing schemas like SCOTT
    etc in the directory structure? if so how to
    view them?

    Hello Srinivas:
    All of the tables that make up OiD in the database are owned by the database users ODS and ODSCOMMON. However, Oracle does not support manipulation of data in these tables via SQL*plus. We want you to treat OiD like its an LDAP server because thats what it is. Use standard V2 or V3 LDAP protocol when accessing and manipulating data in the LDAP server. In addition, there are a number of acceptable third party API's you can also use such as JNDI, Netscapes LDAP SDK, and of course Oracles own C and PL/SQL API for LDAP to manipulate data in OiD.
    Thanks,
    Jay
    null

  • Can we delete the existing fields in standard Infotypes.?

    can we delete the existing fields in standard Infotypes? if it is possible give me the procedure.

    Hi,
         use transaction code PU00
    Or
    u should use HR_INFOTYPE_OPERATION function module.
    This is the std one for all he infotype related operations.
    Regards

Maybe you are looking for