Can we restrict shipping to a specific customer on specific days?
Hi
We have a scenario where we want to resrict shipping to a specific customer on specific days in a week only. i have defined a calander and assigned it to customer site. Afterwards, I tried shipping on a different day. But the system did not stop me from doing so. I was able to ship without any problems.
Any idea how to stop that? Or at least give a warning.
Profile "MSC: Use Shipping/Receiving Calendars" is set to Yes at Site level.
Regards
Varun
Hi Sandeep
The arrival day also is an Off day. Actually my calander is "ON" only on Thursdays. I entered / booked / scheduled / shipped order on 3rd March, which is Wednesday. The Customer on my order was an internal customer ( It was internal sales order with shipping network defined). The transit time is 5 days, hence Arrival Date on my order line was 8th March, which is again Monday, an "OFF" day as per my shipping calander.
Waiting for your inputs.
Regards
Varun
Similar Messages
-
I CAN SEE ALL SHIP TO LOCATIONS FOR THE CUSTOMER EVEN IF I SELECT ONE BILL
Dear,
I CAN SEE ALL SHIP TO LOCATIONS FOR THE CUSTOMER EVEN IF I SELECT ONE BILL TO
Steps:
Create customer name "customer 1"
Under this customer, I create 2 new address
"Customer A " with tow business purpose
1-bill to –> customer A
2- ship to-> customer A after that I link ship to with bill to customer A , I CHECK THE PRIMARY SITE CHECK BOX
FOR THIS SITE
"Customer B" with tow business purpose
1-bill to –> customer B
2- ship to-> customer B after that I link ship to with bill to customer B
Now when I navigate to (N) Order management ->order organizer ->new order
I select the "customer 1" from customer field name I tab to other field bill to
location it is coming by default as primary site customer "customer A"
I OPEN THE LIST I SEE tow customer A AND B I SELECT 'B' AS bill to
When I tab to the other ship to field in also I can see the tow customer " A" and "B" but in real
setup I link the customer "B" WITH ONE SHIP TO ALSO CUSTOMER"B" WHY I CAN SEE
ALL LOCATION FOR THE CUSTOMER EVEN IF I SELECT THE ONE BILL TO .
WHAT THE BENIFIT FROM LINK CUSTOMER SHIP TO FIELD WITH BILL TO IF I CAN SEE ALL LISTS
FOR CUSTOMER SITE
Expected Behavior:
Once I link the ship to location with bill to location I must see when create sales order only the ship to location
link with the specific bill to already specified
Business impact:
This give the user entry ability to enter wrong data or give him the confusion any site I must enter
thanksThat is expected behavior.
You can see the all addresses of account in the list as long as the purpose condition is satisfied. Linking is only for defaulting and not for controlling. If you do not want to see you can create a different account for the B address.
Thanks
Nagamohan -
How can I restrict maintaining the same customer for different CC Areas?
Hi All,
I have a problem about maintaining customer credit limits via tcode FD32.
User can maintain a customer in different credit control areas (CCA) and these CCAs are belong to different company codes.
How can i restrict the user not to update another countries' credit limit?
Your fast reply will be highly appreciated.
Regards,
BilalHi,
I donu2019t think so there is any configuration for this kind of purpose.
You can only do by the authorisation.
Just give the user authorisation that only this person can change the value of the credit control area.
And I think so that will be usefull also because if every body has authority then any body can change the limit which is not good.
First they have to take permission from the authorised person and if he approved then only he should change limits.
So just try out the user authorisation for your purpose.
Regards
Raj. -
How can i restrict the Expenditure Type values at a specific OU ?
Dear Guys,
I would like to ask about the Expenditure Types,
I have implemented two projects for different Operating Units ,
when navigating to any Projects responsibilty,and navigating the Expenditure Type field
the values exist are all the values implemented across the OU not the values entered at this OU
How can i restrict the Expenditure Type values at a specific OU
Regards
Amr HussienHello
When you set up a project there is an option called Transaction Control.
This option allow you to list the allowed or restricted elements of costs for the project.
You may enter the transaction control on a project template and that will be copied to any new project.
The cost elements may be expenditure types, expenditures categories, suppliers, employees, etc.
In your case, I suggest to set up specific project templates for each operating units. On each template enter the list of allowed expenditures types for that OU.
Doing so, the system restricts users from entering any expenditure item, supplier invoice, purchase cost etc, against an expenditure type, which is not allowed.
Dina -
Can we maintain more than one shipping condition for a customer
Hi,
Can we maintain more than one shipping condition for a customerHi Raj,
Yes you can maintain the different shipping condition for one customer but for this that SOLD To Party should have different SHIP to Party also as we mainatin the shipping condition for Ship for the party. In other words you can maintain as many shipping condition equal to the number of ship to party.
Other way is if that customer is in different sales area then you can maintain the different shipping conditions for that customer in all the different sales area.
Hope I could make myself clear enough to help you.
Please reward if its useful.
Regards,
Abhi. -
Can I restrict the release of Preq by creator in customizing?
hello
as far as I know, restricting the release of preq in a way that the requisitioner cannot release it own preq, is only via roles. I have been told that there is a way to do that in customizing but cannot find it: has anyone ever encounter such a restriction in customizing? if yes, where?Hi,
You can easily restrict and control PR release process by having well designed user authorization matrix and release matrix. As per release u201CVALUESu201D, release matrix designed and based on authorization, control can be established for transaction codes.
Lets example: User 1 will create PR, user 2 will change PR and you have 3 codes for releasing PR like C1, C2, C3.Now you can allow(authorized to) user to do following transaction
Transaction Code----
> User
ME51N----
> user 1
ME52N----
> user 2
ME53N -
>(All users ie..user1.user2,user3,user4 &user5)
ME54N with release codeC1----
> user3
ME54N with release codeC2----
> user4
ME54N with release codeC3----
> user5
NOTE: For more details contact basis team and control all these by authorization object.
Regards,
Biju K -
Restrict Shipping conditions on the Sales Orde Header Document
Hi,
I have a unique requirement
We have a large pool of shipping conditions for our products namely
Overnight
One day
Ground
International
Saturday Delivery etc
Hazard Overnight
Hazard Ground
We have a few hazardous materials for which we want to restrict the shipping conditions to only 2
i.e
Hazardous Overnight
Hazardous 3 Day
in sales order creation.
What i mean is tht any time a sales order is created for these hazardous material,the customer service representative should not be able to select any other shipping conditions expect
Hazardous Overnight
Hazardous 3 Day
In Standard SAP we can have the shipping condition defaulted from the customer master in the sales document.However if required we can manually go and change the shipping conditions to any thing different.
How can i restrict this for specific materials though?
Thanks>
Dspsac wrote:
> What i mean is tht any time a sales order is created for these hazardous material,the customer service representative should not be able to select any other shipping conditions expect
>
> Hazardous Overnight
> Hazardous 3 Day
> Thanks
If the question is "can we limit the list that appears in the drop-down box to these 2 selections" then the answer is "No".
But in a user exit you can trigger an error message if the users select an invalid shipping condition. As correctly suggested above, this can be done in MV45AFZZ include.
There are various routines that are triggered at different times. You may be able to use USEREXIT_MOVE_FIELD_TO_VBAP or USEREXIT_MOVE_FIELD_TO_VBKD (if "shipping conditions" are stored in VBKD-VSART). -
How can I restrict certain apps to cellular data only?
Product Name: iPhone 6
Product iOS: 8.3
Background: I listen to Pandora at work through my iPhone 6. My work has pandora traffic blocked through their WiFi network. I want to keep my iPhone connected to the work WiFi because 1) I don't want to turn on and off my WiFi on my phone 2) I want to my email and other apps to use WiFi since they are not blocked.
Current Workarounds (not a solutions):
1) Turn off and on WiFi on iPhone 6- This is a pain/hassle and I forget to turn the WiFi back on.
2) Switching to a different streaming music providers that aren't blocked by work WiFi- I pay for Pandora One and I like this service the best. I really don't want to switch.
3) Download music to iPhone memory- I pay for Pandora One and I'd like to use it.
4) Jailbreak- Not sure if this a solution but I'd rather not jailbreak my device.
Question: How can I restrict certain apps (Pandora) to use cellular data only?
Best Regards,
ChasenThe network settings in iOS are global and do not support assigning specific networks to specific apps. You cannot do what you describe.
-
can i restrict apple mail client from downloading all emails...and allow it to pick a start date for gmail mail to sync? i am flooded with old emails, thousands on them ...eating hard drive space of my macbook pro and un necessary overhead
The genius bar technicians can check your MBP for possible hardware problems and specific software issues that you may have. The diagnosis will be free. Any extensive repairs will not be free.
If you have minor software problems, you essentially will have to deal with them yourself. Examine these two comprehensive documents for possible problem definition and solutions. If you encounter problems that you are unable to cope with, start a new discussion and there will be persons willing to assist you in solving them.
https://discussions.apple.com/docs/DOC-3521
https://discussions.apple.com/docs/DOC-3353
Ciao. -
How Can I replace newScale Text Strings with Custom Values?
How Can I replace newScale Text Strings with Custom Values?
How can I replace newScale text strings with custom values?
All newScale text is customizable. Follow the procedure below to change the value of any text string that appears in RequestCenter online pages.
Procedure
1. Find out the String ID of the text string you would like to overwrite by turning on the String ID display:
a) Navigate to the RequestCenter.ear/config directory.
b) Open the newscale.properties file and add the following name-value pair at the end of the file:res.format=2
c) Save the file.
d) Repeat steps b and c for the RmiConfig.prop and RequestCenter.prop files.
e) Stop and restart the RequestCenter service.
f) Log in to RequestCenter and browse to the page that has the text you want to overwrite. In front of the text you will now see the String ID.
g) Note down the String ID's you want to change.
2. Navigate to the directory: /RequestCenter.ear/RequestCenter.war/WEB-INF/classes/com/newscale/bfw.
3. Create the following sub-directory: res/resources
4. Create the following empty text files in the directory you just created:
RequestCenter_0.properties
RequestCenter_1.properties
RequestCenter_2.properties
RequestCenter_3.properties
RequestCenter_4.properties
RequestCenter_5.properties
RequestCenter_6.properties
RequestCenter_7.properties
5. Add the custom text strings to the appropriate RequestCenter_<Number>.properties file in the following manner (name-value pair) StringID=YourCustomTextString
Example: The StringID for "Available Work" in ServiceManager is 699.
If you wanted to change "Available Work" to "General Inbox", you would add the following line to the RequestCenter_0.properties file
699=General Inbox
Strings are divided into the following files, based on their numeric ID:
Strings are divided into the following files, based on their numeric ID:
String ID File Name
0 to 999 -> RequestCenter_0.properties
1000 to 1999 -> RequestCenter_1.properties
2000 to 2999 -> RequestCenter_2.properties
3000 to 3999 -> RequestCenter_3.properties
4000 to 4999 -> RequestCenter_4.properties
5000 to 5999 -> RequestCenter_5.properties
6000 to 6999 -> RequestCenter_6.properties
7000 to 7999 -> RequestCenter_7.properties
6. Turn off the String ID display by removing (or commenting out) the line "res.format=2" from the newscale.properties, RequestCenter.prop and RmiConfig.prop files
7. Restart RequestCenter.
Your customized text should be displayed.I've recently come across this information and it was very helpful in changing some of the inline text.
However, one place that seemed out of reach with this method was the three main buttons on an "Order" page. Specifically the "Add & Review Order" button was confusing some of our users.
Through the use of JavaScript we were able to modify the label of this button. We placed JS in the footer.html file that changes the value of the butt -
Restrict access to a specific method in JSE
Hello all,
I'd like to know if there is a way to restrict access to a specific method in JSE. Basically, my intention is to do this:
Subject.doAs(subject, new ProtectedMethod());
// only users with a specific role can access this method
// (permission specified in my policy file?)
public class ProtectedMethod implements PrivilegedAction<String> {
public String run() {
}I believe that is not possible to specify a method name in policy file via java.lang.RuntimePermission "accessDeclaredMembers", so is there another way to do this?
Thanks in advance,
AndreI am not an expert of this media hub, but what I would like to know is that are you referring to the security you have setup with the original folders? So after you have created a backup, whatever type of access you have setup was removed? Can you please elaborate?
Check the FAQ's for NMH305 from here: http://support.linksys.com/en-us/support/storage/NMH305 -
Can we restrict changes made in BEx query not to resemble in Universe
Hello Gurus,
I have a question. Lets say if there is a universe created based on BEx query and if later on BEx query is changed (newly added Chars, KF's or change in names) can we restrict the changes not to resemble in Universe?
Please give me any related document or link which will be a big favor for me.
Thanks a lot for your time.Changes in the BEx query are not reflected always automatically in your universe: Eg. if you add an new restriction or a new keyfigure. You have to maunally refresh the structure of your universe and export it again on your BOBJ server.
Some changes will be automatically available though eg. if you change the code of a customer exit variable which is already used in your BEx query, even if you do not refresh the universe.
Please keep in mind that some kind of changes in the query (removing existing key figures or characteristics) may cause error messages when you try to run your universe (assuming you did not update it).
The recommendation here is to refresh your universe when you change the underlying BEx query. If you do not want to do that then your universe may stop working.
Regards,
Stratos -
Can i restrict a manufcaturing plant as delivering plant in order type
dear all,
How can i restrict a manufcaturing plant as delivering plant in order type of Depo sales,
thanks...A manufacturing plant is where stocks of a material are kept and is assigned to a company code.
If a plant is assigned to the Sales Organization and Dist Channel, it is called Delivering Plant. Basically without this assignment, you cannot make any deliveries.
The system copies the plant data into the sales order from the relevant entries in the master records based upon the following priorities:
1. Customer material information master record
2. Customer master record
3. Material master record
The plant data is coming into sales order because of assignment of plant to Sales Organization and Dist Channel.
Hope this clears your doubt -
Why the apple store taken more amount more than the amount written on their prices? Is there any one who can help me to contact the apple customer services. Thanks!
Some country's might not include tax in their prices, and if you changed or added your credit card details whilst making the purchase then a small temporary holding charge may also have been placed - in which case that should disappear within a few days (http://support.apple.com/kb/HT3702). Some apps also then allow you to make in-app purchases (though you can disable that via Settings > General > Restrictions)
-
How we can inactive the credit account for our customer
Hi Gurus,
Can you please let me know, Where we can deactivate the credit account for our customer?
Thanks in advance
Mayank TyagiHi Mayank,
As per my Understanding.
here you are trying to enter the payer code different as sold to party.
if its so,
both ur customer-sold to & Payer has credit master records ( check in FD32).
both might have maintained different credit limits.
so when you enter the payer different as customer, based on credit management configuration - systems check for the Payer as well as Sold to's credit records, if both r different then system prompts this error message.
As i know, it wont allow you to proceed further.
this is the reason in many cases your sold to & payer will be same.there could be chance, that your ship to will be different.
my query is: - why you are trying to enter 2 different ( sold to & payer) partners?
any doubts plz let me know.
hope it clears,
Maybe you are looking for
-
Adobe Creative Cloud Mac! Nach der Aktualisierung von Acrobat XI auf Acrobat Pro CD fehlt FormsCentral und die Funktionen für .fdf Daten in Excel zu übernehmen
-
Thats it, the websites display correctly in safari.
-
SOAP REC Adapter....Configure User Authentication
Hi I have a Receiver Soap Adapter parmater called "Configure User Authentication". If I check this option again we have two fileds which are to be filled with "User" and "passowrd". These user and password are used as authentication to access webserv
-
Hi everyone. I'm pretty new at Java programming, and I started making a simple game. One of the things that I would like players to be able to do is type in the word "map" on the DOS screen or something, and have an applet pop up, and when a player c
-
I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?