* Can We Send Email Notifications Only using User Task in Oracle BPM ?? *

Hi All,
Can we send any email notification to initiator, only from Oracle BPM User / Human task without using any notification activity.
Is it possible to send email notifications using BPM User task alone.
Any Help appreciated.
Regards
Satya

Hi Satya,
To send an email to the person who initiated the work item instance in the process when the instance reaches a human task:
1. Ensure that the id of person who initiated the instance is stored in the process predefined variable called "creator".
2. In the Interactive activity's input data mapping, map this "creator" process predefined variable to the corresponding "creator" attribute in the human task's execData.
3. Open the human task -> click the "Notification" tab -> click the "+" icon in the upper right -> on the new row added to the bottom of the list, leave the task status dropdown set to "Assign" and change the recipent (the middle column) to "Initiator".
Dan

Similar Messages

Who can we send email notification

hi,
we had create user and provide access to the groups using the maxl scripts in the shell scripts.
how can we send email notification for an user after access has been granted to the user using Maxl scripts in shell scripts, and if the user is not created due to error we should not send email to the user.
the user email id will be in the table.
Thanks ,

Hi Rajasekar,
Actually, when the workitem is manually forwarded to the correct agent, the mail should also be sent to the correct agent explicitly. Usually this happens quiet rarely.
You can see the new Agent(Forwarded Agent) in the Workflow Log. I think you can even get the forwarded agent in SWWWIHEAD table. Check this out.
You dont have to change any coding in WD Side.
Regards
<i><b>Raja Sekhar</b></i>

How can i send email notification from UCM?

Hi
I am new to this technology. I need to send email notification to the user's, whenever file is checked-in. What is the procedure to send an email notification let us take GMAIL from UCM.
1) Now I have installed UCM in my machine. Do I need to install any other software to implement this feature(sending email)?
2) I read it in a document, that configuration is needed in a config file in order to send email. What details do i need to give in these fields,
HttpServerAddress= ?
MailServer= ?
SysAdminAddress=?
SmtpPort=25
HttpRelativeWebRoot=/idc/
CgiFileName=idcplg
UseSSL=No
WebProxyAdminServer=true
3) Do I need to install any mail server? If so which software can i go with?? Is it possible to send email to gmail or yahoo acccount without installing mail server ???
Regards
Raj

You will need to have an SMTP server of some sort that you can use. I think out of the box, you may only be able to use an SMTP server that allows anonymous sending or sending unauthenticated (e.g. an internal server). Any good SMTP server (that is not an internal server) would not allow this for security reasons.
Thus, I think if you want to use an external SMTP server such as Gmail, you will need to write custom Java code. See this thread for more information: UCM SMTP server Configuration
Jonathan
http://jonathanhult.com

I can't send emails through Yahoo using Firefox. Already contacted Yahoo and they don't know why it's happening.

I can't send emails through Yahoo using Firefox. Already contacted Yahoo and they don't know why it's happening.
== This happened ==
Every time Firefox opened
== a month agao

I also cannot send email through Yahoo using Firefox 3.6.8. I can receive emails and surf the web just fine. I have also contacted Yahoo and have gotten no where.

Can I send email invitations to local users instead of push notifications?

I see in the documentation that "Attendees can be invited to events via email if they don’t have an iCal Server account." Is there a way to send email invitations to local users instead of push notifications? The server would be migrating from Exchange and everyone is accustomed to/wants email invitations for calendar events.
I've already purchased a copy of Lion Server (10.7.4) and pretty much everything is setup. Sadly I'm just now running into this issue. Email invitations to non iCal server accounts work fine.
Thanks for the help.

Hi gracem0324,
Go to Settings>Messages>Send & Receive, and click on your Apple ID and sign out of Messages. Then sign on again. Sometimes it needs to reset itself....
Cheers,
GB

OIM 9102: Send Email Notification to other user in a task

I created a process in OIM. In this process exist a Task: Manager Process. When this task will be completed for the user that be assigned. In the Notification Tab are able to send a email notification to a Assign User, Requester User, User or User Manager. But i need to send a email notification a other user different to them, for example: juan.perez, this user is in OIM.
I have read the following documents:
1.- http://docs.oracle.com/cd/E10391_01/doc.910/e10363/promgt.htm#BCECFGEJ
2 .- How to Send an Email Notification Upon User Creation via the Admin Console [ID 780394.1]
3.- OIM: An Example of Email Notification and Configuring it With a Resource Object Provisioning [ID 457836.1]
4.- Sending an Approval Notification Email with a Link Directly to the Approval Request? [ID 748447.1]
Or exist some way to do this, through java code.
I'm using oim 9.1.0.2 BP18 running on OC4J 10.1.3.5 on AIX 6.1 64-bit clustered install with two nodes, Oracle Database 10.2.0.4 on AIX 6.1 64-bit on RAC.

Hi
You can use OIM email API to send an email from the java code. You can attach code on post creation user using entity adapter. Every time a user is created the email is triggered.
Here is the sample:
public EmailUtility(tcDataProvider dataProvider) {
          this.dataProvider = dataProvider;
          emailOper = new tcEmailNotificationUtil(dataProvider);
          System.out.println("Email API instantiated successfully...");
     public String sendEmail(String fromAddress, String toAddress, String body,
               String subject) {
          emailOper.setBody(body);
          emailOper.setFromAddress(fromAddress);
          emailOper.setSubject(subject);
          emailOper.sendEmail(toAddress);
          System.out.println("Email sent!" + subject);
          return SUCCESS;
Regards
user12841694

Human Workflow is not sending Email notifications to AD users

Hi,
I'm trying to send email notification to the assigness from workflow. If I use the weblogic users with email attributes, Its sending mails. But once I switch to AD and use the AD users it's not. I have made the AD provider to be the first in the list and also able to login to the worklist app using the same user. Problem is that it's not sending mails.
Can anyone please help soon.
Regards,
Thejas

Can you explain what are AD users and how they are created(APIs)?
Please check that the user exists in wf_local_roles table.
select name,notification_preference, email_address from wf_local_roles where name = <AD Username>
In order to send email notification, the user/role should have the proper email addresses and notification preference set to MAIL* i.e MAILHTMl, MAILHTM2, MAILATTH, MAILTEXT..etc

Auto provisioning users and send email notification to the users

I currently have CUCM 10.5 setup to auto register phones and I use Cisco prime provisioning 10.5 to auto provision the users.
Self provisioning is setup and users can call the IVR number enter the self service ID, which is their DN.
what I would like to do is send an email notifying the end user of their setup and how to use their telephony device Example (Self-service ID: 8888, auth code: 3333) is this possible from Prime Provisioning or CUCM.

Thanks Jamie
Wishful thinking I guess. It would have been seamless if they added that form of email notification to end users when auto provisioning. Anyways to get around that I used MS word mail merge and used the same spread sheet I used to batch provision the users to send the Self-service ID to the email contacts.

How to send Email Notifications to OID users?

Hi All,
I have a requirement where I need to send an email notification from the BPEL process. The Email notification has to be sent to a used who invoked the process the userName is provided in the initiation parameters. But I need to fetch the email id for the give userName from the OID which is integrated with the BPEL Process Manager.
Is there any way I can fetch the email addresses from the OID in BPEL ?
Thank you.

Hi Folks, Finally I found the answer... If the APP server is integrated with the OID(Identity Management is set to Oracle Internet Directory and configured properly) the function ora:getUserProperty(bpws:getVariableData('myUser'),'mail') should return the mail property of the user object in OID.
If your Identity Management is set to the File-Based system then it will get the user properties from the $ORACLE_HOME/bpel/system/services/config/user_properties.xml.

Send Email Notification only once

I've configured my User Form to send out Email Notifications, based on whether or not a particular attribute (usually a Checkbox) is "Yes" or "No".
When the checkbox is ticked, my Update-User Workflow sends out Email Notifications.
The obvious problem is : if another Administrator logs into IDM, views that same User Form, and then clicks SAVE, naturally, my Workflow sends out the Email notifications AGAIN.
Everytime the Form is processed, emails are sent (*because the checkbox is ticked*).
How can I solve this problem? How can I ensure that Email Notifications are sent only ONCE ?
Thanks.

I tried to do it like this :
*<Action id='1' name='email12' application='com.waveset.provision.WorkflowServices'>*
*<Condition>*
*<and>*
*<isTrue>*
*<ref>user.global.checkbox</ref>*
*</isTrue>*
*<isnull>*
*<ref>user.update.accounts[Lighthouse].changes[checkbox].old</ref>*
*</isnull>*
*</and>*
*</Condition>*
*<Argument name='op' value='notify'/>*
In other words : send the Email ONLY if the "Old" value of the checkbox is NULL. (if the checkbox was not previously ticked).
But, it didn't work. The email was sent again.
Perhaps, my syntax is wrong?

Can't Send Email from Iphone Using Pop Account

I have check our host names, ports, user name, passwords etc (all the account mail settings are OK) for incoming and outgoing servers. I can receive email fine but can't send them back out through the outgoing server. I am using the identical settings that I used in my Treo (which sent out emails fine). Upon sending an email the error message I get on my iphone is: " The recipient [email protected] was rejected by the server." I've noticed that I can send an email to "myself" (from the iphone) and it will show up on the in my email box, but email sent to other addresses will generate the above message. I've noticed, too, that I have to keep resetting the "Authentication" to "Password" (under advance settings) because it mysteriously resets itself to "MD5 Challenge-Response". The setting should be set to "Password" however. We are using a FirstClass email system. Sending email via the iphone by way of .mac, yahoo and gmail works fine (no mysterious rest of the "Authorization" settings either) .
It most me something obvious, but I can't see it.
I would really appreciate some help.

You might find this discussion helpful:
http://discussions.apple.com/message.jspa?messageID=4976383#4976383

How can I send email from iPad using someone else's server

I use the Netspace server but I'm visitng a friend and using her optusnet server for the Internet, however I am unable to send email, even though I can receive it

Critters222-
I assume Netspace is your Internet provider. They may have their mail server set up to only work when you are accessing the server locally from their domain. I suggest you contact Netspace and ask them what you need to do to send E-Mail to them from other domains.
Have you been able to send E-Mail from other places? If so, there might be a firewall problem in Optusnet. In that case, they may be best able to advise you.
Fred
Message was edited by: Fred*M.

System workflow sends email to only first user - CRM 2013

I have a system workflow to create and send email.
The "To" fields is set to owner;createdby;modifiedby.
But the email goes to only the owner(the 1st one).
If the sequence in "To" field is changed, then also the email goes to the first one.
P kar

Hi Abhishek,
It is Okay to have one email.But if in "To" I am specifying 3 different fields(users), one email should go where ,
To : USERA;USERB;USERC .............
But it fails.The email goes only to the first user.
Whereas if I keep multiple recipients in CC it works.
Thanks
P kar

Can't Send Email through Outlook using blackberry as a modem

I am using my blaclberry 8900 as a modem and cannot send emails through outlook. I have called t-mobile and they say that it cannot be done. However I could do it with my Nokia. Any suggestions?

Outlook folder permissions are Outlook issues, try the Microsoft Outlook Forums.

Can't send email from phone using @me account?

I'm getting an po5-smtp.. failed error? Not on WiFi.

You might find this discussion helpful:
http://discussions.apple.com/message.jspa?messageID=4976383#4976383

* Can We Send Email Notifications Only using User Task in Oracle BPM ?? *

Similar Messages

Maybe you are looking for