Can we send email to a member as when he is added to the Oppty Team?

Can we send email to a member as when he is added to the Oppty Team without any condition by picking the email id from the User object?
I mean just send an email to the new user when it is created in the oppty team
I think about using workflow,record type 'Opportunity Team', trigger event 'When new record save'
but the send to email only have 2 options, one is Specific user,the other is specific email address, no send to email id which come from the user object.
do you have any suggestion?
Thanks
Amanda
Edited by: user12170878 on Feb 1, 2010 7:08 AM

I try to use JoinFieldValue('<User>',[<UserId>],'<EMailAddr>') in the Specific Email Address, no matter the new created user or the user which I log in, both email Account don't receive any email
Regards
Amanda

Similar Messages

  • I can not send email from my iPhone or iPad its goes out from the iMac ok. I get SMTP is incorrect. any suggestions?

    Having problems sending email from my iphone and ipad. Im getting a SMTP is incorrect error. Has anyone had this problem?
    Spent 3 hours with internet carrier still not resolved. Everything is fine on the imac.

    What is the error message provided if any?
    If the email account is provided by your ISP, does your ISP have an authenticated SMTP server?
    Are you unable to send email with the account using your iPhone or iPad when connected to the same wi-fi network or internet connection as your Mac with your ISP?

  • I can't send emails, I have tried to go to smtp and change the outgoing email username and password but it won't let me change it!

    I have tried to change the smtp username and password but I am not able to even click on the areas to change them.  Any suggestions?

    Some other thoughts .....
    Are you sure there's not an issue on the Yahoo server? Have you checked your email on a computer or via a web browser on the iPad like Safari?
    If there is no issues on the server side, the options in my mind are.....
    Delete the email account and start over
    Reset all settings>Settings>General>ResetAll Settings - you erase all settings on the iPad and start over
    Restore from a backup.
    Just wait until a little later - or tomorrow and see if you can connect again.
    If you just started experiencing this issue today, and if you are a regular iPad backup person (I do it every single day) then you can restore from a backup from yesterday, the day before or from whenever your most recent backup is dated.
    You said that you have two other accounts that will not work either so maybe resetting the settings would be the first thing to try. You should be able to at least enter the correct information again if you reset the settings.
    I mysteriously lost the ability to connect with one of my email accounts some months ago. I deleted the account and went nuts trying to add it back to the device and I could not get it to work again. I deleted it again and restored from my backup and all was good to go again. Your backups contain your email settings so when I restored from the backup, it restored the email account settings and it worked again.

  • Can't send Email: Error 500 or 403 when trying to use SP.Utilities.Utility.SendEmail

    Hi all,
    I am getting a Internal Server 500 error when trying to send an email using the SP.Utilities.Utility.SendEmail in my SharePoint Online App. It is worth noting that I am working from a custom .aspx page that does not inherit from the Masterpage, and using
    AngularJS (thus the $http).
    If I change the urlTemplate to use the hostWeb instead of the AppWeb, I get a 403 forbidden. Is there a library I need to include since I am using a custom.aspx page instead of the default.aspx page that comes when creating an App?
    Any clues?
     var appweburl = decodeURIComponent(getQueryStringParameter('SPAppWebUrl'));
     var urlTemplate = appweburl + "/_api/SP.Utilities.Utility.SendEmail"; $http({
    contentType: 'application/json',
    url: urlTemplate,
    type: "POST",
    data: JSON.stringify({
    'properties': {
    '__metadata': {
    'type': 'SP.Utilities.EmailProperties'
    'From': [email protected]',
    'To': {
    'results': ['[email protected]']
    'Body': 'Hello',
    'Subject': 'remember'
    headers: {
    "Accept": "application/json;odata=verbose",
    "content-type": "application/json;odata=verbose",
    "X-RequestDigest": $("#__REQUESTDIGEST").val()
    }).success(function(data, status, headers, config) {
    $scope.data = data;
    alert("Email Sent!");
    }).error(function(data, status, headers, config) {
    $scope.status = status;
    alert("Email FAil!");
    Personal Blog: http://thebitsthatbyte.com

    I've got it working in SharePoint Online/SharePoint App using the following. Note that I am using AngularJS:
    function sendEmail() {
    var appweburl = decodeURIComponent(getQueryStringParameter('SPAppWebUrl'));
    var urlTemplate = appweburl + "/_api/SP.Utilities.Utility.SendEmail";
    $http({
    contentType: 'application/json',
    url: urlTemplate,
    method: "POST",
    data: {
    'properties': {
    '__metadata': {
    'type': 'SP.Utilities.EmailProperties'
    'From': '[email protected]',
    'To': {
    'results': ['[email protected]']
    'Body': 'Good Day from the App. Dont reply if this was received.',
    'Subject': 'App says hello and is awaiting your review'
    headers: {
    "Accept": "application/json;odata=verbose",
    "content-type": "application/json;odata=verbose",
    "X-RequestDigest": $("#__REQUESTDIGEST").val()
    }).success(function(data, status, headers, config) {
    console.log("Sent!");
    $location.path('/');
    }).error(function(data, status, headers, config) {
    console.log("fail");
    function getQueryStringParameter(param) {
    var params = document.URL.split("?")[1].split("&");
    var strParams = "";
    for (var i = 0; i < params.length; i = i + 1) {
    var singleParam = params[i].split("=");
    if (singleParam[0] == param) {
    return singleParam[1];
    Personal Blog: http://thebitsthatbyte.com

  • IPhone 5 no longer receive emails, but can still send emails with yahoo email account. Any ideas to fix?

    iPhone 5 with iOS 8.1.2 stopped receiving mail yesterday. Have yahoo email account. Can still send emails. Have turned device off/on. Have done the dual off/on thing using top button and menu button.   Issue seems to be only with main inbox, as sub folders are receiving mail. Other Apple device is not having issues like this, just on iPhone.

    LAMfromA2 wrote:
    iPhone 5 with iOS 8.1.2 stopped receiving mail yesterday. Have yahoo email account. Can still send emails. Have turned device off/on. Have done the dual off/on thing using top button and menu button.   Issue seems to be only with main inbox, as sub folders are receiving mail. Other Apple device is not having issues like this, just on iPhone.
    Your issue is with the Yahoo email account which is notoriously bad.
    you can try deleting and reinstalling the email account.
    If that doesn't fix it try the yahoo email app.

  • How can one send email-sized photo files as attachments in Mail, without the photos appearing within the email?s

    How can one send email-sized photo files as attachments in Apple Mail, without the photos appearing in the body of the email?  If it can be done, it's not at all obvious, at least not to me.  Thanks for any help you can provide.

    The "View as icon" option shrinks the photo to an icon in the sender's Apple Mail, but how it appears to the recipient varies dependingy on what e-mail client he/she uses.
    Using Apple Mail 5.0 (the Lion version) at both ends, the sender can use the "View as icon" option to shrink his view of the photo to an icon, but the recipient also using Apple Mail 5.0 still sees the full photo in line with the message text. The recipient can then use the "View as icon" option to shrink it to an icon, but I don't think that's not what jackofarabia is looking for.
    As far as I know there is no way in the current Apple Mail to do what jackofarabia wants. There should be, but there isn't.

  • My mail account to offline.  I can't send email

    my mail account is offline and I can't send email - how do I get it back online

    Right click on the Inbox, and choose Go Online

  • FIOS to DSL now I can't send email via port 25 or 587

    I was cruising along fine for a year on FIOS.  Then I moved 2 days ago to a new house with DSL.  I connected my system the same as before.  Viola!  I can not send email via Outlook 2002 on non verizon email acccounts.
    Yes, I have read through the port 25/SMTP issues but nothing has worked.  Online support reset my winsock settings, but did not work.
    XP sp 3
    Outlook 2002
    Non Verizon Email
    Anyone find the solution?
    Thanks in advance!
    Solved!
    Go to Solution.

    Maybe this will help:
    For the sake of example, we are going to pretend that we are setting up your outgoing server with  fictional account  "[email protected]" and the password for logging into that account in webmail is "fakepassword" - Again, this is a fictitious account for the sake of an example.
    The Incoming settings will be what your 3rd party provides.
    Outgoing Server: outgoing.verizon.net
    Server Requires Authentication: Yes
    Username: fakeacct
    Password: fakepassword
    Requires a Secure Connection (SSL): No
    Port: 25 (although 587 also works.)
    These settings should work unless you have a Verizon/Yahoo account, in which case the server name should be: outgoing.yahoo.verizon.net
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • How can I send email using two different email address that both link back to my one exchange account on my Ipad mini

    How can I send email using two different email address that both link back to my one exchange account on my Ipad mini? 
    On my PC I simply have a master return email address and use a POP for the secondary address.  Both are through the one exchange account without a problem.  I need to be able to do the same on my Ipad.

    Ah, I should have made that clear.  My domain didn't come from google.  It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail.  I actually have a bunch of domains (with websites).
    Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such).  Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender.  I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it.

  • I just updated my IPad to iOS 5 and now can not send email. The error message says the server rejects the address which is not true Asti sends on my desktop.

    I just updated my iPad to iOS 5 and now can't send email- I have tried the obvious but no luck. Any suggestions?

    Usually 'authentication required' means that you need to submit a username (or e-mail address) and password to the e-mail server, when sending a message. This logic is not different between Outlook and Thunderbird, and even with the latest and previous version of Thunderbird.
    Of course you can try the previous version again to see if it solves the problem, although you'll be less secure because you would be missing the latest fixes.
    If you'd be willing to get back to Thunderbird, say if your frustration level with your new app would increase too much, please see our article [https://support.mozilla.org/en-US/kb/cannot-send-messages cannot send messages] for further help.
    In all other cases I'd appreciate it if you could mark this as answer so we know you don't need further help.

  • I can't send emails from iPhone until I connect to my wifi! I am with bigpond and have a bigpond email address. Can anyone help me?

    I can't send emails from iPhone until I connect to my wifi at home. I am with bigpond and have a bigpond email address. Can anyone help me?

    Try closing the Mail app completely and see if it works properly when you re-open it : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Can't send email from mac

    Hi
    I don't know since when, but I can't send email anymore via iCloud on my Mac. iPhone and iPad work. Online iCloud as well.
    I am running:
    OS X 10.9.2
    Mail 7.2 (1874)
    I use the @me.com adresses
    smtp Server says: iCloud(iCloud)
    What I tried so far:
    I went to Accounts in SysPref and activated and deactivated the account.
    No help
    I deleted my iCloud account and created it new from scratch on my Mac
    No help
    But it changed the smtp server info from iCloud(iCloud offline) to iCloud(iCloud)
    But still can't send it.
    Also, all info seems to indicate that everything is fine. Account Info, etc.
    I am running out of options.
    Any help?
    ExKingKong

    Try deleting the email account in Mail's Accounts preference pane
    and then add it back. That will automatically enter the correct server addresses.
    OT

  • TS3899 I still can not send email from my ipad but iPhone works on those accounts

    I still can not send email from my .mac account or a .comcast.net from my ipad. I how 2 people so far that has brought to my attention. We have exchange accounts setup on the ipads for work. I compare the settings from iPad to iPhone from my view it appears identical. I am looking at an iPad 2 and a Mini.
    I turned on and off the ipads and nothing really changed. The emails come into those accounts.
    Any suggestions?
    Thanks
    VickiHTC

    When you say you can't send...as in they never get the email?  Does the email appear to send?  Error message?  When?
    It may be more than one iPad that has a problem....

  • I can't send email from my iPad. I am from Australia but on holidays in Greece. Does anyone know what is the smtp outserver for Greece that I should use?

    I can't send email from my iPad. I am from Australia but on holidays in Greece. Does anyone know what is the smtp outserver for Greece that I should use?

    As you haven't told us who your email provider is, no.
    There isn't an SMTP server for Greece - it is either provided by your email provider, or the Internet provider you are connected through.

  • I can not send email from my iPad .  Have been using it for over a year, all of a sudden I can only receive email.  I have a wifi connection in my home and have a A T &T cellular data plan?

    I can not send email from my iPad .  Have been using it for over a year, all of a sudden I can only receive email.  I have a wifi connection in my home and have a A T &amp;T cellular data plan?

    I have a 1st gen iPhone that I just updated the software to 2.0.2
    Now whenever I press the mail icon it goes to the mail app for about 4 seconds, does nothing, no loading of folders, old messages, nothing.
    Then it reverts back to the home screen. Tried restarting, haven't tried restoring, thought I'd look here first.
    Anyone???

Maybe you are looking for

  • HP Officejet Pro 8100 - AirPrint - wireless

    My HP Officejet Pro 8100 had been working just fine with AirPrint, but then I changed my wireless router and I've forgotten how the printer was configured originally. I only use the 8100 with my apple iPhone 4S, it's not connected to any computer and

  • Where is security configuration for deployed web application stored

    Hi, We have deployed a folder as a web application. The changes I am making in Deployments -> web application -> Security -> URL Pattern -> Roles -> Edit a Stand-Alone Web Application URL Pattern Scoped Role is not saved and it is getting lost when I

  • IE 11 using Javascript 1.3

    I have a web project that has to work on multiple browsers. When I use the following link to test the javascript versions this is what I get: Link: http://jsfiddle.net/Ac6CT/ For IE 11 I get 1.3 (my code breaks) For IE 9 on Vista I get 1.7 (my code w

  • Print with no color management CS4 + Snow Leopard broken

    I have seen comments in this forum about problems with printing with CS4, but wasn't sure that they were going to apply to me. They do, big time. I print to an Epson 9800, I convert the image to the Epson profile for that paper, and then print using

  • SOUND MUTING WITH XFI FATALITY TITANIUM AND WINDOWS 7

    5SOUND MUTING WITH XFI FATALITY TITANIUM AND WINDOWS 7z Ok sorry if this hasbeen covered before but I searched and couldn't find it so here goes: I have a two month old XFI FATALTY TITANIUM CARD WITH THE FRONT PANEL BREAKOUT BOX. It showed up starigh