Can we send the same message two different recievers with sequence

Hi,
i am sending the same message to two different receviers without using BPM.
now i require to send with sequence.is it possible without BPM?

Hey
There are two options for this
First one is to use Wait step in BPM as other experts suggested.
Second one is a dirty way around,what you can do is send the second message to a dummy receiver first(may be a file on your XI server),then design one bypass scenario which will pick up the file after a specified time interval(give the poling interval you want).
i would go for BPM coz its pretty straight forward,but in case you want to avoid BPM then u can use the second approach
for bypass scenario,have a look at the following
How to send any data (even binary) through XI, without using the Integration Repository

Similar Messages

Send the same message to two receivers with some time difference..

Hi
I want to send the same message to Two receivers with the slight time difference.. becuase but not at the same time.. if the same time means.. just we can specify the two receivers in the one receiver determination..
but if i want to send the same message to Two reveivers with the time difference means..(after sending the message to first receiver.. after some time gap.. i need to send the message to second receiver..
this type of scenarios how can we do.. is it possible to do with out BPM... please suggest me the solution..
Thanks
Jain .P

Hi Jain,
With BPM you can easily do it.
i am giving you the steps:
1)first add a receive strep to get your message
2)then, put a receiver determination step with a multiline receiver container element assigned to its Receivers property.
3)then, put a block in dynamic mode(ie. ForEach/ParForEach mode) and assign the multiline receiver container element to its multiline element and assign a simple(single line) receiver container element to its current line property.
4) add a send step within the block, choose Receivers List in its Receiver From property and choose the current line receiver element in its Receivers property.
5) then add a wait step in the BPM, in its type select Wait Specified Time Period and then mention the duration in your desired time unit.
**Reward points if helpful...
--Sankar Choudhury

How to send the same message to two SMTP servers

hi,
I need to send a message to two different SMTP servers.
I want to avoid the creation of new MimeMessage with a new Session.
the only way I've found was to keep a reference to the Properties instance that was used in the Session creation, and modify its "mail.smtp.host" property.
Is there another way? I must be missing something.
thanks,
ofer

hi,
I've already found the solution, so I'll post it here.
first I'll explain the purpose:
I needed to send the same message to a normal email server, and (for some of the recipients) to a special SMTP server that is on a different machine.
the following code demonstrate the solution.
thanks for your help.
ofer
----------code---------------
public class MultipleSendTest {
private final static Session server1 = createSession("somesmtp_server.com");
private final static Session _server2 = createSession("another_smtp_server.com");
public static void main(String args[]) throws Exception {
//create the message
MimeMessage m = new MimeMessage(_server1);
m.setText("body text");
m.addRecipients(Message.RecipientType.TO, "[email protected]");
m.setFrom(new InternetAddress("[email protected]"));
//send
send(m, _server1);
send(m, _server2);
private static void send(MimeMessage message, Session session) {
//for logging only
String host = session.getProperty("mail.smtp.host");
try {
Transport transport = session.getTransport("smtp");
transport.connect();
transport.sendMessage(message, message.getAllRecipients());
System.out.println("sent to " + host);
transport.close();
} catch (MessagingException e) {
System.out.println("failed to send to " + host);
private static Session createSession(String host) {
Properties properties = new Properties();
properties.setProperty("mail.smtp.host", host);
return Session.getInstance(properties);
----------code---------------

My mac mail on just keeps sending the same messages even after deleted and shows thousands of emails supposed to be coming in

My mac mail on just keeps sending the same messages even after deleted and shows thousands of emails supposed to be coming in

If you have a backup, you can restore the e-mails. Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Library/Mail/V2.
Thanks to leonie for some information contained in this.

Can I sync the songs from two different Apple IDs (HK and JP) into one iPhone?

I want to buy some songs from a HK Apple ID and a JP Apple ID.
I just hope the songs of two Apple ID can appear in one iPhone.
But I don't want can I sync the songs from two different Apple IDs (HK and JP) into one iPhone.

Are you currently in Japan or Hong Kong ? You have to be in a country (and have a billing address in that country on your account) to buy or download from its store, that is included in the store's terms.
You can sync content from different accounts from your computer's iTunes library.

Uploaded music to iCloud and it broke up my albums, I now have the same albums in different location with 2 or 3 songs on each one, can I make them whole albums again and how do I keep it from happening again?

uploaded music to iCloud and it broke up my albums, I now have the same albums in different location with 2 or 3 songs on each one, can I make them whole albums again and how do I keep it from happening again?

The iTunes Match forum is here: https://discussions.apple.com/community/itunes/itunes_match

Can we bind the same fragments into different xsd Schemas

I have created different fragments for a single form. I have to render the fragments as well as the complete form on the web. I have created the different services for each fragment and bind the schema with them and this works fine for me but while using the same all fragments in one complete form I am not able to get the data. How can I do this?
Can we bind the same fragments into different Schemas? If yes, then how?
Or we need to follow some other approach?

yes, we are using the LiveCycle Designer and LiveCycle Workbench Process for rendering the PDF form.

[svn:fx-trunk] 13501: Bug: BLZ447 - AMF3 Deserialization: Wrongly counted reference ID of duplicated String when in the same message there are Strings with only wildcards

Revision: 13501
Revision: 13501
Author:   [email protected]
Date:     2010-01-14 06:01:23 -0800 (Thu, 14 Jan 2010)
Log Message:
Bug: BLZ447 - AMF3 Deserialization: Wrongly counted reference ID of duplicated String when in the same message there are Strings with only wildcards
QA: Yes - please keep an eye on AMFX (HTTPChannel) tests.
Doc: No
Checkintests: Pass - except the usual 4-5 tests that time out on my machine.
Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/amfx/AMFXDecoder.as

Dear Pallavi,
Very useful post!
I am looking for similar accelerators for
Software Inventory Accelerator
Hardware Inventory Accelerator
Interfaces Inventory
Customization Assessment Accelerator
Sizing Tool
Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
Request help on such accelerators... Any clues?
Any reply, help is highly appreciated.
Regards
Manish Madhav

1 app, 3 devices, 1 iCloud - how can I run the same game on different devices?

My wife and I share one iTunes account and one iCloud account for 2 iPhone 5's and an iPad. Our home laptop is a PC running windows 7. We are not able to both play the same game (specifically Carcassone) at the same time on different devices which is frustrating, how can I make this happen? Do I need two separate accounts? Can I have two accounts with a PC? We don't want to sacrifice the photostream to get it though.
Thank you,
Jacob

Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
Therefore, remembe the passcode that you enter this time.
It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup.

How can all of the same subscriber in different instance get the meesages?

Hi
I am using MDB to recieve messages from publisher, used for event and notification, I deploy same MDB into different instance, if there is a event, the publisher will publish a message, and all subscribers in different instance are supposed to get the message, but reffer to the message flow, only one of these MDB will recieve the messages.
One solution is to have different clientID for these MDB in different instances. But unfortunately, the value for clientId should be constant expression.
Here is my code, any suggestion?
@MessageDriven(mappedName = "cluster_publisher_adm", activationConfig = {
     @ActivationConfigProperty(propertyName = "acknowledgeMode", propertyValue = "Auto-acknowledge"),
     @ActivationConfigProperty(propertyName = "subscriptionDurability", propertyValue = "Durable"),
     @ActivationConfigProperty(propertyName = "clientId", propertyValue = "test"),
        @ActivationConfigProperty(propertyName = "subscriptionName", propertyValue = "myTest"),
     @ActivationConfigProperty(propertyName = "destinationType", propertyValue = "javax.jms.Topic") })
public class TopicListener implements MessageListener {
    public TopicListener() {
    }How can I have all the MDB in different instances to get the same messages?

I presume you are using Glassfish and Glassfish Message Queue, and that your Glassfish instances are clustered. If so, then if an MDB (listening on a topic) is deployed into the cluster, each message will indeed be delivered to one MDB per cluster rather then to one MDB per instance. This is a feature known as "shared subscriptions".
If you are using Glassfish 2.1.1 or 3 (but not earlier versions) you can disable this using an activation spec property. Take a look at the latest documentation at
http://docs.sun.com/app/docs/doc/821-0027/aeooq?l=en&a=view&q=activationspec
and scroll down to the new property "useSharedSubscriptionInClusteredContainer". You need to set this to false.
Nigel

HT4059 I cant download a previously purchased book ...yes I tried tapping the cloud. It just send the same message.

I purchased a book from itunes. I downloaded the preview book but it wont let me dounload the whole book. I keeps telling me I have already purchased and to go to purchases and tap download. I did, and taped the cloud. It keeps sending me back to the same message. What can I try now???

Welcome to the Apple Community.
You'll need to delete the partial book first.

PPOME - Can't insert the SAME task for different organization unit

Hi all,
I have a doubt; in SAP 46C, it seems that is impossible to insert in PPOME, Detailed window, Tasks tab the same task for different organization unit. The only way to do this is in PP01 - General management, where you can explicitely create a [B-007] relations with the same "T" Object. Now, it is a little bit difficult for a user to switch from PPOME ad PP01 when defining new organizational structure.
The question: is there any way to insert the <b>SAME</b> task directly in PPOME, overwriting the standard behaviour of the system that by default create a new task for each new insertion?
Thanks all
Paolo

Hi Naveen
thank you for your prompt reply.
The issue that I want to solve is that some organization unit (not all) must be flagged for an external export to another system, depending on some characteristic of each org unit. I didn't find a similar attribute on standard field, so I thought to insert a common task to all the org units to export, so that this relation can serve as the missing attribute on org unit definition.
PP01 let me insert a task (type T, and not TS) on an org unit directly, so I want to know if I'm going to break some standard behaviour of SAP if I insert a task on OU.
Thank you
Paolo

Using an IDOC sending the same message in two different format

i have a message which i have to be sending from one SAP system to another, but the message should be split into 2 different formats using mapping and send to one receiver where the 2 messages are segregated using some ID number. here we will be using IDOC for sender.
kalyan.

Hi,
I think you can go for the multimapping(1:2) and not exactly splitting the message but mapping it one source to two different targets that need to be sent to one receiver...
Just see these blogs on that..
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
You need to go for enhanced interface determination.
Thanks,
Vijaya.

Can you run premiere pro on two different computers with the same log in?

can I install and buy adobe premiere pro and run it on two different computers. Got a desktop at home that I work from and a laptop to bring to clients... So far my trial only want to work on one of the assets?? Many thanks

Hi Dream5,
Please check the below forum discussion.
Creative Cloud multiple computers
Also, check this link for more information and errors.
Error "Activation limit reached" or "Sign in failed" | Adobe products
Regards,
Vinay

Anytime I hit send, the message isn't going through? But I can still send the same msg from my iPad!

Hello everyone! I have been trying to reply to an email from my MacBook Pro without a success. Anytime I press "send", nothing happens. But I could still send emails from iPad! Does anyone know why? Thanks.

Email may not be the best way to move pictures.
There are lots of ways of moving files.
A simple and popular way to copy files and share files among your devices.
https://www.dropbox.com/
"Box lets you store all of your content online, so you can access, manage and share it from anywhere. Integrate Box with Google Apps and Salesforce and access Box on mobile devices" Rated the most secure cloud storage by SkyHigh Networks.
https://www.box.com/
Using iTunes to transfer files:
http://support.apple.com/kb/HT4094?viewlocale=en_US&locale=en_US
Files Connect -- "Cloud Storage services like Dropbox, MobileMe iDisk, Google Docs/Picasa, Facebook photos, FTP, SFTP, WebDAV ... AFS (Apple File Shares) SMB (Windows shares) protocols"
https://itunes.apple.com/us/app/files-connect/id404324302?mt=8
Windows File server
http://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8
"The kiteworks mobile file sharing solution provides secure creation, viewing, and sharing of enterprise content on smartphones and tablets while providing IT and security teams the administrative controls to manage user privileges and access rights necessary to ensure enterprise security and compliance." " Includes choice of private cloud on-premise."
http://www.accellion.com/solutions/mobile-enablement/mobile-file-sharing
"Dukto is a simple application that allows you to share files between devices connected to the same (wireless) LAN network."
http://www.tidal.it/?page_id=309&lang=en
http://www.msec.it/blog/?page_id=11

Can we send the same message two different recievers with sequence

Similar Messages

Maybe you are looking for