Can you enable AHCI in Windows 7 on a MacBook Air 11"?

i know people have enabled AHCI in MB Pro's. there's a bunch of information regarding that laptop. i've tried to follow those directions but AHCI just won't turn on. i'm wondering if the PCI IDE Controller just doesn't support AHCI or if i'm doing something wrong.
does anyone have any information regarding this matter?
thanks in advance.

Apple uses a proprietary extensions for perfectly standart, even a bit outdated base EFI. Big difference with proprietary efi. Just for you to know - you can grab (opensorced, standart) UEFI, compile it yourself in MS Visual Studio under windows and Apple's extensions will perfectly load into it at runtime.
I'd recommend you read this:
http://msdn.microsoft.com/en-us/windows/hardware/gg463525
exactly pay attention to this:
* The GUID Partition Table (GPT) was introduced as part of the Unified Extensible Firmware Interface (UEFI) initiative.
and than - this:
Windows XP x64 Edition can use GPT disks for data only.
The 32-bit version will see only the Protective MBR. The EE partition will not be mounted or otherwise exposed to application software.
Starting with Windows Server 2003 Service Pack 1, all versions of Windows Server can use GPT partitioned disks for data. Booting is only supported for 64-bit editions on Itanium-based systems.
Can Windows 7, Windows Vista, and Windows Server 2008 read, write, and boot from GPT disks?
Yes, all versions can use GPT partitioned disks for data. Booting is only supported for 64-bit editions on UEFI-based systems.
Last one sounds good, yes? Actually no:
Windows GPT Required Partitions
EFI System Partition
What is the Extensible Firmware Interface System Partition (ESP)?
The ESP contains the NTLDR, HAL, Boot.txt, and other files… blabla
Do you really think that NTLDR, HAL, Boot.txt are parts of OS-independent UEFI standart?
Can there be two ESPs on a single disk?
Such a configuration should not be created and is not supported in Windows.
So Apple just can not create special win-specific partition for Windows to load directly - it just does not support it
Microsoft Reserved Partition
What disks require an MSR?
Every GPT disk must contain an MSR. The order of partitions on the disk should be ESP (if any), OEM (if any) and MSR followed by primary data partition(s). It is particularly important that the MSR be created before other primary data partitions.
Do you really think that Microsoft Reserved Partition is a part of OS-independent GUID GPT standart?
Q.          Who creates the MSR?
The MSR must be created when disk-partitioning information is first written to the drive. If the manufacturer partitions the disk, the manufacturer must create the MSR at the same time.
So for windows to boot directly, Apple should themselves create windows non-standard partition on every mac sold.
And, furthermore, it (Apple) have to install NTLDR, HAL, Boot.txt and other MS crap on every mac. Paying license fee for that.
It's not my fantasies - it's open data from Windows Hardware Developer Center > Learn > Devices > Storage Technologies > Windows and GPT FAQ of MS itself.
And same story you can find about UEFI support on Windows. Non-standard things required here and there.
Do you know that Linux can boot on macs directly, as it doesn't require some MSR sh*t and such?
There are a lot of things to blame Apple, but not this one

Similar Messages

  • How can you enable back the Android native Menu button in AIR 2.7?

    I've noticed in AIR 2.7 for Android, that now the bottom icons in Android 3.0 Honeycomb are hidden (replaced by small dots) in AIR 2.7, whereas in AIR 2.6 they were always visible. That's cool. Since the bottom bar can never be hidden in Android 3, at least now those icons are less visible (unless you intentionally touch the bottom bar, then the icons show up for a few seconds).
    BUT I also noticed in AIR 2.7 compiled apps, the native "Menu" icon is not visible anymore, even after touching the bottom bar. In AIR 2.6 you could see and press that button (which can be captured from AIR so you can show a custom settings menu or whatever).
    So, quoting the subject --> How can you enable back the Android native Menu button in AIR 2.7?

    There is a work around and a reason for the menu issue.  Honeycomb doesn't natively support a menu softkey, it is only to support old apps comiled in phone API levels.  If you compile a Honeycomb app in 2.7 or 3.0, it is expected you manage the settings within the larger tablet UI framework.  See below link for more info and work around. 
    http://forums.adobe.com/message/3964792#3964792

  • HT2490 Can you have to apple ids on the same MacBook Air?

    I am getting a MacBook Air and my dads and i both have apple ids. Is there a way that we can both have our own ids on the Air and just login to them when we get on?

    You can create a new user for another Apple ID. Open System Preferences > Users and Groups and select + button to create an user. Then, go to  > Log Out and log in the new user

  • Can you use iPhone ear buds microphone with your MacBook Air?

    If you use your ear buds to listen to your Facetime conversations, are also using the microphone on them to talk?

    Yes you can. Any headset compatible with the iPhone works just fine for full duplex conversation on a MacBook Air of current design. The microphone and earphones are simultaneously active.

  • Can you enable and disable windows task bar

    I there a dynamic way to enable and disable the windows task bar?

    I am not clear on a way to do this, but if it were possible, you would have to make calls to Windows SDK. You would use the Call Library Function Node to access one of the Windows System DLLs to do this. I would suggest checking http://msdn.microsoft.com. This is a great resource for SDK related issues.
    J.R. Allen

  • Can you enable Intel VT-x and EPT on macbook pro 3,1

    Hi,
    Has this problem still ongoing?

    Hi,
    I use the same kind of MacBook Pro but am also a newbie. So maybe I can give some hints.
    1) To automatically load a module, edit /etc/rc.conf and add the name of the module to the MODULES list.
    2) Did you add pommed to the DAEMONS list of /etc/rc.conf ? Works for me perfectly.
    3) I just strictly followed the Beginners Guide of the wiki.
    - added !snd_pcsp to MODULES in rc.config
    - installed alsa-utils
    - installed alsa-oss
    - added myself to the audio group
    - invoked alsamixer to unmute channels
    4) It can be configured in some files located at /etc/X11/xorg.conf.d/ . I've never looked into that because I use an external mouse.
    Hope some of that helps,
    Viv

  • HT1349 Can I get a full history of repair my MacBook Air, please?

    Hello.
    Can you send me all history of repair my MacBook Air ( Serial No : W8******22E ), which is in your storage at the moment - repair number R1****6919
    Regards,
    Krzysztof Cwalina
    <Personal Information Edited by Host>

    First, this is the AppleTV forum.
    Second, these are user to user support forums.  There is no one here from Apple.
    Contact Apple directly.

  • How can you use symbols in Windows 7 on a IMac 27

    How can you use symbols @$€%£¥ in Windows 7 on a IMac 27 mid 2011?  I tried what was normally done on Windows and got nothing.  Alt plus numbers and nothing happens, what am I missing?

    Frosted Flake,
    Are you referring to an equivalent to the Windows Character Map Application (charmap.exe) that allowed you to see the various characters available in each font, and then give you an ALT-nnn number you could key to use the character you wanted ?
    If so you can use the Special Characters from the Edit menu of most applications. Once you have located the character/symbol you want double click it and it will be entered wherever you cursor is located in your application.
    Further information can be found here :
    http://support.apple.com/kb/PH3871
    Hope this helps
    Cheers
    AF

  • Can you enable Numbers, Pages, or Keynote to automatically save every....

    Can you enable Numbers, Pages, or Keynote to automatically save every ...(desired time intervals) like Microsoft Office does?

    Look at:
    http://discussions.apple.com/thread.jspa?messageID=8759406
    You will get a link to my Applescript which not only autosaves but keep consecutive datestamped copies so, if the last saved copy appears to be a corrupted one, you may get the preceeding one.
    Yvan KOENIG (from FRANCE jeudi 14 mai 2009 11:39:26)

  • Can you run labview on Windows Tablet PC Edition?

    Can you run labview on Windows Tablet PC Edition?...or does LabVIEW executable and Run-time engine operate with this OS?

    LabVIEW 7.x will run without any problems on a Windows Tablet PC with SP1. There have been documented issues with Windows XP SP2 and LabVIEW subsequently not exiting properly--LabVIEW's window closes but somehow it is still present in the task manager.
    Hope this helps.

  • Can you get iChat for windows or is it just for macs???

    Is iChat just for mac's or can you get it for windows?? and if so how?

    Hi
    AIM 5.9 is here
    They do need to be using XP
    They do need to "tune" the camera and mic to the AIM Application
    They need to allow the application as an exception through the XP firewall
    http://www.ralphjohnsuk.dsl.pipex.com/page12.html#_Service
    This site says it in a lot more detail
    http://www.mvldesign.com/videoconferencetutorial.html
    If you really want to make this work.
    Page 5 on my site lists other options of Mac to PC video chats including the Skype option
    10:21 PM Wednesday; February 14, 2007

  • HT1589 how can you do this for windows 8?

    how can you do this for windows 8?

    It should be the same as in other versions of Windows; hold down the Shift key and launch iTunes. Have you tried that and found it not to work?

  • HT201343 Can you AirPlay to an Apple TV with the MacBook closed? I have a late 2011 MacBook Pro.

    Can you AirPlay to an Apple TV with the MacBook closed? I have a late 2011 MacBook Pro.

    If you are using airplay then that should be fine once the content is playing. You can't use home-sharing in this manner however.

  • I am trying to install windows 8 at my macbook air boot camp

    I am trying to install windows 8 at my macbook air boot camp but Boot Camp Assistant i showing an error that the disk cannot be portioned because some files cannot be moved. Back up the disc and use disk utility to format it was a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistant Again.
    I had already installed teh first time Windows on my MacBook Air and Mac Book Pro. Actually I had more issues to install on the pro than Air.
    But my Macbook Air had an issue on November 2013, 3 weeks after buying it and Apple gave me a new MacBook Air but they only transferred the information on my mac and the windows partion was lost according to them, they could copy it in to my new MacBook Air. Now that I am trying to install my windows I can not access to the aprtion section and get the error message from above.
    What can I do to to install it? I am using a 32GB USB and OEM Windows 8 at USB External Drive. The same I used before. I dont know understand what changed if I did it before?
    Please advise..

    I think there's some remmants left over from when Apple transferred stuff over. We can try a quick fix, but if that doesn't work, I think the only option is to clean install OSX and then install Windows.
    open disk utility, confirm that you only have 1 partition (mac journaled)
    restart and PRAM reset
    open disk utility and repair permissions twice
    restart boot camp assistant
    Does it work?
    If not, I would boot holding command+R, choose disk utility from the menu and completely erase your HD (formatting it as mac journaled again). Then, install OSX on this HD. Once OSX is installed, don't copy your files over from the backup yet. Instead, start boot camp assistant and see if you can get Windows installed. You can copy back your other files after we get Windows installed.

  • Did you have buggy Mavericks issue after installing on Macbook Air Mid 2012?

    Before I have upgraded my OS X Mountain Lion 10.8.3 to Mavericks 10.9 it runs so smoothly and no issues or hanging that I encounter. But just this morning when I installed Mavericks, I have the following issues:
    1.) When I was adding a book(pdf and epud files) in iBook, the Finder malfunctioned, coz when I browse the books to it's location so I can add some more again, the Sidebar icons disappeared and only the names left. And when I go to the location of the files using Finder, the content is nowhere to be found, just a symbol on the window’s status bar that it is loading or busy on something.
    2.) When I go to the Launchpad, when I scroll to left and right to find the apps I’m looking using the touchpad, it's not as smooth as before. It tends to halt on sliding to the other groups of apps, seems like there’s a friction stopping it from sliding smoothly all the way to the next group of apps.
    3.) Updating the Apps from App Store seems cumbersome like the iPhoto and iMovie, coz when the internet fails or drops its signal for a while or so, you go back and download everything again, and when you hover the mouse to see the progress of the downloaded app, it shows for example 22mb of 1gb then shifted to 300mb of 1gb then back to 22mb of 1gb then back again. It’s not accurate and going berserk.
    4.) And I don't know if it is just me, but the screen profile have changed a bit coz the red color of the Power Point icon seem too red and everything that has a hint of red color seems exaggerated, it’s too bright red. I'm just not sure it might be the GUI style of the Mavericks. . .
    Anyway, have any of you experienced these kinds of issues on your Macbook Air Mid 2012?
    Hopefully this could be fixed and Apple would seed an update in no time.

    Even on my MacBook Pro Haswell (2013) 15 inch retina with a GT 750 2gb.
    The Things in Mavericks that really make me :
    1. The Launchpad is buggy when i scroll to the left or right... sometimes it doesn't even respond at all.
    2. Safari and Other Apps Like AppStore freez sometimes, and i need to force quit everytime, because its not           responding.
    3. Bootcamp Windows 8.1 <---- NOT 8 Support (Bad Keyboard- Facetime camera- drivers,
        Icons (brightness, sound) are ugly on retina screen) + GPU Drivers i can't update (maybe that's normal).
    4. iTunes is very SLOW when Scrolling the Albums (i know its 2880x1800 and that's heavy for GPU) But it's just     not a good 'Experience'.
    5. Gaming its realy good on this MacBook, but please make the drivers better, i know this GT 750 GPU can do           better.

Maybe you are looking for

  • How do I find out my MBP's 'server name?' to run Remote Desktop Connection?

    How do I find out my MBP's 'server name?' to run Remote Desktop Connection?

  • Itunes 7.5 and ipod shuffle problem

    I installed the Itunes 7.5 and then attached the new ipod shuffle. The itunes brought up the ipod shuffle but only showed the agreement screen. When I typed in that I accepted the software agreement it would not go to any other screen. I can import m

  • J2EE server not running. 503 service unavailable

    Hi , J2EE Server is not starting. Rest all are running in mmc console.The contents of the file std_server0.out is as below. stdout/stderr redirect node name : server0 pid : 584 system name : J2E system nr. : 00 started at : Tue Feb 15 10:12:46 2005 C

  • Two iTunes questions in regards to my podcast

    Question #1 - I put up episode #7 late laswt week, but it still isn't listed in iTunes. Any idea why? Question #2 - On the page where my podcast is listed it says it is under the literature heading, but when I go to that heading I don't see it listed

  • MAIL crashing after update to MAVERICKS OSX

    I have updated my mac book pro , early 2011 model to osx mavericks and since then i cannot open my mail app and whenever i try to open it crashes. Please help as i really need to operate my emails.