Can you force a value into a read-only numeric data member?

I have code that will force a value into a numeric data member. Unfortunately the numeric data member in question is read-only. Can you force a value into a read-only numeric data member?

Andre,
I think you should get together with the other engineers there at NI. I spoke to one on the phone yesterday and he told me that the read-only aspect relates to writing between the database and PLC. I'm trying to write to the database and he told me that I could do it.

Similar Messages

  • Without manual entry can you input a value into a numberic control?

    I am using a numeric control and a button (with a case structure) to manually input numbers into a function.  However, I also want to be able to, via a text file, enter numbers into that same numeric controller, so that I can again hit the button and have the number enter the function.

    endmile said:
    Writing to the local variable will set the value at that time, but it's still updating the value of the local variable all the time.
    What exactly do you mean by this?
    endmile said:
    But in this case, I think the simplest answer is the property node.
    That's not a valid conclusion. There is no "simplest" answer. It's all context-based. There's nothing "bad" or "evil" about local variables. In fact, they tend to be faster than writing to the "Value" property node. Let's just say that proper use depends on understanding how each operates, and once you know that, each can be used effectively.
    I hope this doesn't become another one of those "local variables vs property nodes".

  • How can I programatically use the forced values to put a value into numeric data member?

    I am extremely new at using Lookout and need a way to programmatically force a value into a numeric data member so that I can later use that value as a flag when creating a report.

    Hi,
    You can do this with an Expression similar to the following:
    Object.datamember = if(Pb1, Pot1, Object.datamember)
    Where Object.datamember is the datamember of the Object you want to write to.
    Pb1, is a PushButton -- it can be any logical condition.
    Pot1, is a Pot -- it can be any other source for your numeric data.
    The IF statement basically says, "if Pushbutton Pb1 is pressed, write the current value of Pot1 to the Object's datamember. And if it's not pressed, leave its value as-is."
    Hope this helps.
    Regards,
    Khalid

  • How can I pass a value into a page fragment?

    How can I pass a value into a page fragment?
    I am implementing four search screens. And the only thing different about them will be their backing bean.
    So I’d like to do something like have four pages, each which retrieves its appropriate backing bean, sets that bean to a variable, and then includes a page fragment which contains the generic search page code (which will make use of that variable).
    The code in the four pages would be something like this:
    <?xml version='1.0' encoding='windows-1252'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
    xmlns:c="http://java.sun.com/jsp/jstl/core">
    <jsp:directive.page contentType="text/html;charset=windows-1252"/>
    <c:set var="searchPageBackingBean"
    value="#{pageFlowScope.employeeSearchPageBean}"
    scope="page"/>
    <jsp:include page="./SearchPageBody.jsff"/>
    </jsp:root>
    At this point, what I’m seeing is that the fragment page, SearchPageBody.jsff, has no visibility of the searchPageBackingBean variable, either referencing it as #{pageFlowScope.searchPageBackingBean} or just #{searchPageBackingBean}

    The following will work, assuming you are needing to access a managed bean:
    Put this in the parent page:
    <c:set var="nameOfSearchPageBackingBean"
    value="employeeSearchPageBean"
    scope="request"/>
    Put this in the child, SearchPageBody.jsff:
    <c:set var="searchPageBean"
    value="#{pageFlowScope[nameOfSearchPageBackingBean]}"
    scope="page"/>

  • In the "Numbers" app can you paste "as values" as you can in excel?

    In the "Numbers" app can you paste "as values" as you can in excel?

    Hi volgc,
    I am not currently using iCloud- I need to wait for the dust to settle over iCloud Drive. I would thnk that the default would be to paste values rather than formulas but again, I am on the Mac or iOS. What happens when you use control-c and control-v. Is control-v pasting the formulas?
    Copy and paste in iOS Numbers on your iPad should not be any problem for you. When you tap the cell you want to copy the popup menu will offer you the choice to copy, when you tap on the cell you want to paste into you will be offered the choice to paste formulas or paste values.
    quinn

  • Can you import Dreamweaver files into Muse, how?

    Can you import Dreamweaver files into Muse, how?

    If the images aren't showing up in DW, why do you think they will show in Muse?  Obviously, something is wrong with the paths to those images.  And that will most likely be due to the underlying code.
    Can you post an example of a problem page?
    Nancy O.

  • Can you plug the kona3 into a macbook pro?

    can you plug the kona3 into a macbook pro?

    Recommended KONA 3 System:
    Apple Mac Pro with Dual-Core Intel Xeon Processors (2 GHz or better) with a minimum of 2Gb RAM for uncompressed SD or 4Gb for uncompressed HD. Use a Fibre Channel or SCSI external RAID for uncompressed SD/HD storage.
    Minimum KONA 3 System:
    Power Mac G5 (dual) PCI-Express, 2GHz with 2Gb minimum for uncompressed SD or 4Gb for uncompressed HD. Ensure your Macintosh has a PCI-Express slot for compatibility. Use a Fibre Channel or SCSI external RAID for uncompressed SD/HD storage.
    Recommended KONA 3X System: Apple Xserve 3 GHz Quad Xeon or Power Mac G5 (dual) 2.5 GHz or better with minimum of 2Gb RAM for uncompressed SD or 4Gb for uncompressed HD.
    PCI-X slot required (later G5s have these slots)
    Minimum KONA 3X System:
    Apple Power Mac G5 (dual) 2GHz with a minimum of 2Gb RAM for uncompressed SD or 4Gb for uncompressed HD. PCI-X slot required (later G5s have these slots)

  • In new Numbers, can you export a file into excel format?

    In new Numbers, can you export a file into excel format? Or is this something else thats been removed!!??
    HELP!!

    Hi AMGracie,
    In Numbers 3.0 on a MacBook Pro running OS X 10.9
    Regards,
    Ian.

  • Can you convert this file into good searchable pdf file: Medical Terminology- A Short Course.azw4

    Can you convert this file into good searchable pdf file: Medical Terminology- A Short Course.azw4

    I don't think that Adobe offers any software to convert .azw4 files.  Search Google for alternate converters.

  • How can i show a value into a MessageStyledText

    Dear all,
    Suppose i have a value in a variable i.e. number=10;
    how can i show this value into a MessageStyleText when page loads.
    please suggest.

    Gyan wrote:
    Mofizur,
    Get the value from the variable & Use the below code in PR.
    OAMessageStyledTextBean processCodeBean = (OAMessageStyledTextBean)webBean.findChildRecursive("<Replace with Bean Id>");
    if(processCodeBean!=null)
    processCodeBean.setText(pageContext,null);
    }Regards,
    GyanString employeeNumber = "10";
    processCodeBean.setText(pageContext,employeeNumber);
    OR
    processCodeBean.setValue(pageContext,employeeNumber);
    Thanks
    --Anil                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • HT4623 can you download pictures from a card reader to iPhone?

    Can you download pictures from a card reader to the iPhone?

    AverySwan wrote:
    Can you download pictures from a card reader to the iPhone?
    That would depend upon the card reader, who makes it, and what their suppointing software does.  I happen to have an older ZoomIT SD card reader with a 30 pin dock connector.  The hardware maker provides an app for iOS that allows me to use the adapter with my iPhone 4 and I can open pictures from the SD card and view them.  I believe it even allows me to save teh image to my cameral roll if I want.  Since it does have the 30 pin dock connector, I need to use the Apple adapter to plug it into the Lightning port on my iPhone 5, but is still works just fine there too.
    I also have the Apple Camera Connection Kit (30 pin version) but it is much more restrictive.  It only works with the iPad, and it only copies certain files form teh SD card to the iPad. (The files must be in the "/DCIM" folder on the SD card, the file name must be in the older DOS 8.3 file name format, and I believe it only woirks with JPG, and MOV files.  As you can see, the Apple device is built to let me view pictures from my point-n-shoot cmera on the iPad screen, whereas the ZoomIT allows copying of content to/from the SD card and an iPhone/iPad/iPod Touch.
    Now for the bad news, I don' tthink the ZoomIT reader is made any longer, and when you can find them, the sellers are usually charging close to $125 for them.

  • When you are sharing songs through wifi, can those songs be copied to another device?  Can you copy the songs into a playlist?

    When you are sharing songs through wifi, can those songs be copied to another device?  Can you copy the songs into a playlist?

    When you are sharing songs through wifi, can those songs be copied to another device?  Can you copy the songs into a playlist?

  • Lost the white converter box.  Can you plug the USB into a computer to charge the ipad

    Can you plug an ipad into the computer USB port to charge it?

    You can plug it into a computer but it will be a very very slow charge. The best thing to do is go to any office / electronics store and get a new charger.

  • Can you plug a ipad into a monitor and keyboard?

    I don't know anything about ipad's.
    Can you plug a ipad into a monitor and keyboard?

    As Rudegar pointed out, the AV cable is an adequate option. But another option is to purchase an Apple TV. That's the only way to use Airplay from an iOS device (for now). I'm pretty sure no OEM TV's support Apple's Airplay technology as of yet. Apple wants you to purchase the Apple TV so don't hold out hope that they'll license the tech to TV manufacturers any time soon.
    Check out Apple's demo of Airplay on their website and see if that's an option you might like. The AV cable is cheaper but IMO a cable of any kind is a cumbersome work around. And the Apple TV allows you to also play music and look at your pictures from any iOS device as well.
    Re: your other question: "Can I see my iPad on the TV in general when hooked up?". The answer is, "Not yet". Only the "output" (IE: music, video, slideshows) can be seen through Airplay or the AV cable. You can't use the TV as a second monitor for your iOS device.
    Lastly, you can't "break" your device simply by trying to hook it up to your TV. I had the same issue with my father this holiday with trying to convince him he couldn't break his camera by trying to hook it directly up via the USB connector on the TV.
    <Edited by Host>

  • Can you move Magazine Aps into Newsstand

    Can you move Magazine Aps into Newsstand?

    >What are folders. Seems as tho, if you have collections etc., you have what folders are: namely an organizational hierarchy.
    Yes they both are organisational hierarchies - one on your disc drive (folders) , the other in your Lightroom catalogue (collection).
    But the big difference is that your folder structure is fairly well fixed (changeable of course by moving, renaming and copying etc) whereas a Collection is in no way dependent on your file structure on disc; it is totally of your choosing as to what it contains. You can modify it without regard to your folder structure on disc.
    As an example, you can create a quick collection to use in the Print module, and after you have printed you can delete the quick collection and it in now way affects your files on disc.
    Another example, you can search for all photos with a particular piece of metadata, select them and make a collection. That collection will bear no relationship to your disc structure; you can modify the collection and it does nothing to your folder structure on disc.
    Yes, folders and collections are organisational stuctures, one is physical the other, for want of a term, is virtual.
    I could go on, but I hope that the above is reasonably clear...
    (Edit: I should get quicker at adding replies, since I see that Lee Jay got in there with a perfect answer, while I was composing an essay!!)

Maybe you are looking for

  • I have a new Mac air and need to install office from a disc. How do I do it

    I have a new MacAir that does not have an optical drive. I have office 10 with an unused licence on a disc. How can I install it on my MacAir?

  • Calling selection screen from another selecton screen.

    Hi guys, I want to call default selection screen of one program from default selection screen of another program. Is that possible . would appreciate some helpful answers. Thanks, Venkat.

  • How to use .class with generics

    Okay, in Java 5, Foo.class works just fine. But Map<Foo,Bar>.class does not. What is the right format? I am trying to get a field value through reflection: public static <T> T readFieldValueCastSave(    Object target,    String fieldName,    Class<T>

  • Applets, icons and JFrame

    Hi! I'm an applet's begginer ... So I really want you to help me. Well, I've made a text editor using a JFrame. So, now I want to put it into an applet. This editor contains many icons, when I run the application it works fine, but when I run the app

  • Unable to open/setup ichat.

    i've read some FAQ's already, and it says that the first time i open ichat a set-up screen is supposed to pop up. but that never happened. and now, when i try to open ichat, nothing pops up at all, but the icon is still down in my dock, like the prog