Can you get an elapsed time stamp into excel that is good to a mSecond. Time since 1904 is only good to 15 msec.

I'm try to log data at a fast rate and I'm using the 1904 time stamp. I've noticed that the system clock only updates every 15 msec. I'm logging data every 5 msec. So when I plot the data I have three readings per time slice.

I don't know what the true update time is it exactly it looks to be around 15msec to 16 msec. If I sync to nist I will get an accurate time stamp but I'm still stuck with the slow 15msec update rate of the system clock. The time stamp accuracy isn't that important but the elapsed time from start of the test is. You can see some times you get 3 readings at the same time stamp and some time 4. To get elapsed time what I did is put time stamp value into excel then subtract that value from all values taken after that point (= D4-$D4$). Since the number of reading at each time stamp varies I can use my simple excel formula. Thank you both for you replies.
elapsed time voltage 1 voltage 2
0 5.432934 7.762001
0 5.437446 7.765869
0 5.443248 7.764257
0.014989853 5.44486 7.762646
0.014989853 5.438413 7.762646
0.014989853 5.448083 7.762968
0.014989853 5.442603 7.766836
0.014989853 5.441314 7.76329
0.030990124 5.436802 7.761034
0.030990124 5.450017 7.760389
0.030990124 5.43938 7.763935
0.030990124 5.443893 7.765547
0.046999931 5.44486 7.760389
0.046999931 5.440347 7.762323
0.046999931 5.446149 7.766836
0.046999931 5.44905 7.767158

Similar Messages

  • How can I get the elapse time for execution of a Query for a session

    Hi ,
    How can I get the elapse time for execution of a Query for a session?
    Example - I have a report based on the procedure ,when the user execute that it takes say 3 min. to return rows.
    Is there any possible way to capture this session info. for this particular execution of query along with it's execution elapse time?
    Thanks in advance.

    Hi
    You can use the dbms_utility.get_time tool (gives binary_integer type value).
    1/ Initialize you time and date of beginning :
    v_beginTime := dbms_utility.get_time ;
    2/ Run you procedure...
    3/ Get end-time with :
    v_endTime := dbms_utility.get_time ;
    4/ Thus, calculate elapsed time by difference :
    v_elapsTime := v_endTime - v_beginTime ;
    This will give you time elapsed in of 100th of seconds...
    Then you can format you result to give correct print time.
    Hope it will help you.
    AL

  • Can you export the date and user to Excel that appears into a Comments field in a tracking list?

    Hi everyone,
    Can you export the date and user to Excel that appears into a Comments field in a tracking list?
    When i export a tracking list with a Comment field in the Content type, the screen where you enter the data for an item, the Comments field just export the text of the comment into the Excel file.
    In the Comments field appears also, besides the comment text,  the user and date from who and when the comment is added.
    Is there a way to export also the user and the date?
    Thanks
    Wim

    create another comment field that doesn't use 'appending', and through SP Designer change workflow keep
    updating that field with the new comments  (prepend the field with date/username/new comment). Hide the field on all forms, but put it in the view you need to export to Excel.
    Please refer few more links: Hope they will help
    http://www.nothingbutsharepoint.com/2009/04/16/versioning-append-changes-to-existing-text-view-entries-aspx/
    http://sympmarc.com/2011/02/07/showing-all-versions-of-append-changes-to-existing-text-in-a-data-view-web-part-dvwp/comment-page-3/
    https://mossipqueen.wordpress.com/2013/03/06/display-all-appending-field-entries-in-a-single-list-view/
    http://community.office365.com/en-us/f/154/t/278560.aspx
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • How can I get the Elapsed Time express to output in milliseconds?

    I am trying to get the Elapsed Time express to output in milliseconds or in seconds to three decimal places. I am pretty new at this.
    Thanks in advance!

    I'm not sure I understand your question. The output of the Elapsed Time Express VI is a DBL. It's already a floating point number. The default format for a numeric indicator is 6 digits of precision. You can change this in the properties for the indicator.
    To learn more about LabVIEW it is recommended that you go through the tutorial(s) and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.
    Attachments:
    Example_VI.png ‏4 KB

  • Can you get Webcam videos from Windows into iMovie on a Mac?

    I had a lot of videos on my old HP laptop's webcam and i wanted to know if i could edit them in iMovie because when i try importing none of them can be imported. If you know how i can fix this reply.

    Jade did you get this worked out? My internal hardrive crashed so I lost all of itunes. But I have all my music copied on an external HD.

  • Can you get chapters out of PP into Encore if it is a DD5.1 Blu-Ray?

    This is a minor item however annoying.
    I make 5.1 DD audio HD Blu-Ray discs.  Therefore, I cannot use dynamic link (cannot believe this is STILL not fixed even in CS5, but anyway...) so I have to export my video and audio out of P Pro (I use CS4) and then import into Encore.
    Am I correct that however I import into Encore:
    1) As an asset into Encore separately for both the 5.1 audio and video and the select both and right click to create a timeline.
    or
    2) Import the Video (with no audio) directly as a timeline and then import the 5.1 audio as an asset and add it to the timeline.
    Regardless, neither method keeps the chapter marks that were made in P Pro.  Again, not a big deal but it would be nice.
    It is so frustrating that as Adobe touts their 5.1 and Blu-Ray capability that they have still have not made it seamless with dynamic link.
    Thanks,
    BJBBJB1

    Stan,
    Thanks.  I will try the dynamic link for my next 5.1 project.
    As far as minor edits, I am transcoding once I "think" I am done in P Pro and then importing into Encore a separate audio and video stream.  But, if I miss something an don't notice it unitl I am in Encore or the disc is made, I have to as you say go back to the original and then fix it in Pr Pro, re-transcode and re-import into Encore.
    My understanding is with Dynamic Link I would have the added benefit of not having to do that because then the transcoding WILL take place in Encore.
    As far as feature request, I would be less worried about chapter marks carrying over than having an integrated dynamic link process for 5.1 projects.
    BJBBJB1

  • Can you get free trial more than 1 time

    Can you get free trials more than on time on the same computer cause i need dreamweaver but cant pay for it i use at school but dont have it on my computer yet just the trial

    This page says that you cannot restart a trial, you can only install onto a different machine:
    http://kb2.adobe.com/cps/153/tn_15322.html
    You can try contacting Adobe support ( http://www.adobe.com/support/contact/ ), and maybe they will have some other work around. You should also check with your school, they may have a student or education price that is much much less than the retail price of Dreamweaver.

  • How can you get OS Lion back if you already downloaded Mavericks?  I CANNOT live with the battery life of 2 hours!!  HELP

    How can you get OS Lion back if you already downloaded Mavericks?  I CANNOT live with the battery life of 2 hours!!  HELP

    Kappy wrote:
    Don't downgrade OS X without first erasing the drive. You cannot restore a Time Machine backup of Lion directly on top of a later version of OS X such as Mountain Lion or Mavericks.
    When you "Restore from a Time Machine Backup.", the drive will be erased for you, but yes, won't hurt to:
    Boot into Recovery (hold ⌘R on boot)
    Utility->Disk Utility->Erase Macintosh HD, then Repair Macintosh HD
    Quit Disk Utility
    Then Select: Restore from a Time Machine Backup.

  • If you buy an IPad online would it have an Apple warranty and can you get extended warranty from Apple

    If you buy an iPad online would it have an Apple warranty. Can you get extended warranty?

    If you buy it from the Apple Online store yes it will have full 1 year warranty, and the possibility to directly buy Apple Care +.
    If you buy it from somewhere else, it may not. If the online seller is not an Apple authorized reseller then you may need to take to to an Apple Store for physical inspection before purchasing the Apple Care Plus extension.
    If its not sealed and new, the warranty timer may have started to elapse, and it may not be eligible for Apple Care +.
    But without knowing where you plan to buy it its hard to say for sure.

  • In LV6.1, can I get the run-time menu refnum of a VI from the VI Path?

    Actually, for any version of LabVIEW, can I get the run-time menu refnum from the VI Path (or the VI reference)?
    Thanks!
    Enrique
    www.vartortech.com

    I just thought of a workaround...you could have a Menu Bar Ref indicator on your main VI front panel.  When your VI runs, you could have the Current VI's Menubar function wire the refnum into that indicator.  Then, in your subVI that has the VI reference, you could use VI Server to read the value of that indicator, then cast the value into a refnum wire, then you'd have access to the menubar reference in the subVI without having to pass it in to a subVI terminal.  Would that work?
    Oh, another simpler idea would be to simply wire the Menubar reference into a global, and read that global in the subVI.
    -D
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • My camera is a sony dsc-w330! I can't get my cord to go into the camera so I can download my picture

    Hi, My kids bought me a sony camera  dsc=w330 cyber=shot last year in october! The camera is fine except I can't get the cord to go into the camera to download it to my computer! It was always a little hard to get it to go into it but now it won't go in at all! It's like something is wrong with the camera! I tried a new cord and it still wouldn't work! I don't have the receipt because my girls got it for me and we was going thru a rough time with my husband as he was sick and had pasted away and they have no ideal where they put the reciept! Is there anything I can do? th Thank you for any help you can give me, Penny Newman  62 german hollow   Ironton, Ohio 45638

    First: Please, please, PLEASE, edit your original post, removing your address. Including your address, phone number or email address in an open forum like this is a very bad idea. Second, just to be clear, the W-330 uses a miniUSB cable, not a microUSB cable. I have no doubt that the cable that came with your camera had the correct connector on it, but please make sure that the new cord you got has the right connector on it. MiniUSB connectors were always a little bit troublesome, so I'm not surprised that you might have had trouble with that, but if you possibly got the wrong cable as a replacement, that could definitely cause a problem. Beyond that, I agree with bitsnpieces that your camera may be damaged. I also suspect that the warranty has expired, even if this problem might be covered by a warranty repair, which I suspect it wouldn't. I fear that your best option is to replace the camera.

  • Can you get values back from a stored procedure via OUTPUT parameters?

    Can you get values back from calling a stored procedure via OUTPUT parameters/variables? I call the SP via a SQL statement from a script either in a WF or DF.
    I thought I read some reference that DI could not get the values from OUTPUT parameters but I could not find it again (don't know if it is in any of the documentation or referred to in a forum.
    I did try a couple of tests but it did not reutrn any values via OUTPUT. But before I give up I thought I'd see if you could and maybe I needed to change something.

    This isn't exactly an answer to your question, but I'll point out that, given that you're resorting to a SQL script in the first place, there's no reason you can't also turn the output parameters into a regular result or record set. (The following uses T-SQL, although I think it's pretty generic.)
    declare @param1 int, param2 varchar(100), @return int;
    exec @return = proc @param1 = @param1 output, @param2 = @param2 output;
    select @param1 as param1, @param2 as param2;
    That is, to get from output parameters to a "regular" output from the SQL script isn't much of a leap...
    Jeff Prenevost
    BI Consultant
    Ann Arbor, MI

  • Can you get a new serial number for Logic Studio?

    so i just bought Logic Studio from a friend and i successfully installed it onto my mid 2012 13-inch MacBook Pro (entry level). Problem is that after the software was installed, i opened one of the applications that came with the bundle (Logic Pro) and it requested me to enter my serial number. I typed the right one and it didnt let me in. I tried to do that with all the other applications that came with Logic Studio but none of the apps let me in even though i tried more than a bunch of times.
    So my question is: can you get a NEW serial number?
    if not, then is there another solution that wont require me to download hack files?
    Thanks.
    -Jackson

    http://support.apple.com/kb/TS2005
    http://support.apple.com/kb/HT1861
    https://ssl.apple.com/support/proapps/serialnumbers/

  • Can you get month view on iphone with OS7?

    Can you get a month view with ical on iphone with IOS7? I can on my iPad still. I need to be able to look at several calendars on one screen and see where a free slot is in a month and I can't see anyway of doing this now as the month view just shows a date and then you have to go in to it. Thanks.

    Hi. Thanks. I've tried that but it's not solving my problem! I want to quickly check 3 or 4 days in a month and see if I availability at different times. The month view makes this easy but I can't see a away of doing it without checking a day at a time and hoping I can remember when I was free on the previous day I checked!! Eg. Someone gives me 3 days to choose from for a meeting. Month view enables me to see all the dates immediately.

  • How can you get a compilation album to show up as one album rather than be split up but song and artist?

    how can you get a compilation album to show up as one album rather than be split up by song and artist? I've got loads of albums on iTunes that are compliations and they are all mixed up by track/ artist. Even when you click 'show album' it still just shows the album title and then the artist in alphabetical order - so the album is replicated several times
    Can anyone tell me how to amalgamate compliation albums please?

    This web page will help you: http://samsoft.org.uk/iTunes/grouping.asp

Maybe you are looking for