Can you help me find pix that I stupidly made a new folder in temp files and now can't find my pictures?
Can you help me find pix that I stupidly made a new folder in temp files and now can't find my pictures?
Mac Pro
Using a MacBook Pro
Two different computers. One is a desktop & the latter is a Notebook. Which one are you having issues with?
Which os is installed on your computer?
Please describe in detail all you have attempted to do in order to resolve the issue. How did you "search?"
Similar Messages
-
please can you help me to solve my problem ( I have iphone is linked with Apple ID and I forgot that Apple ID and I can't remember it , I need thats Apple ID to activate my iphone ,,, what should I do ?
mohammed aljasim wrote:
there are many people that error is happened with them and one of this people is me ,, Apple must be find the solution for this problem
You are absolutely WRONG. Apple bears no responsibility in this at all. YOU purchased a STOLEN phone. You are guilty of receiving stolen property at best. Take it back to wherever you bought it and demand a refund. Failing that, turn it over to the police. You got ripped off. I'm sorry you wasted your money, but there is NOTHING Apple or anyone else can do for you. Only the rightful owner of the phone can unlock it. -
Hi can you help the sound is not working on my Mac I have went into settings and there are no option for interal speaker help
Read the documentation at the links. They won't hurt your data.
Basically smc reset is shutdown, pull your plug for 15 seconds, plug it back in, wait 5 seconds, and reboot. Harmless to you. Resets the smc.
Pram reset is similar but you need to push commnd-option-P-R after the boot chime. Read what does.
smc and pram reset -
I have an ipad 64GB (first generation) and could not do upgrades on it. What can i do and how can you help? I need to dowload some business applications but requires 6.0 iOS and up but I have 5.1.1. iOS. please help
iOS 5.1.1 is the last version an iPad 1 can run. If you need to run iOS 6 or later, you'll need a newer iPad.
Regards. -
Hi, my wife uploaded new fonts to her macbook and now can not see any writing on her screen, can I fix this?
System fonts deleted accidentally. Does anyone know how I can fix this please?Thanks Mike,
Absolutely right. I restarted in Safe Mode. This enabled me to see the actual text on the screen. Then I backed up. Then reinstalled. All fixed.
Thanks again,
Chris -
I updated new software on my Apple 4S phone and now can't use it because it requires a 4 digit security code that I don't know. The phone store when I originally bought phone bypassed it for me. How do I find it?
Hey dentallady!
Here is an article that can help you reset this code:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
Hi, The emails that I have received show the date received as either today, yesterday or July 28. How can I get the correct date received?
That's very scary. They might do it, but I personally have never had Apple contact me re id's except on their site when signing in. I suggest you DO NOT respond until you have a phone conversation with Apple security. They can verify if they sent you the e-mail and why.
While it's very possible it's true,again, I suggest you not respond until you speak to someone at Apple. I've often read here that when people sign in they are not allowed to because "someone else has used the id" type of statement.
Also, you should be able to go to the app store and see what apps you have downloaded.
Though it could have been a free app, have you checked to see if any were bought with your id account?
I've gotten these types of e-mails from places like USPS and FedEx which look amazingly authentic and were from their website. I also received an odd e-mail from my cousin in Ireland last year that clearly was not from him. It was also sent to others in his family in Ireland. I e-mailed him that I only opened it because it had a .ie, but suggested he change... Days later I received mail from 'him' - same name, but at yahoo.com.
Again, I would call Apple. You can also report it at [email protected], but I would not settle for that given your situation. If nothing else, call Apple sales (sales depts. anywhere answer fast) and ask them to transfer you to security. Apple will not want anybody accessing their name, and while it's unlikely, it's not impossible that it is someone phishing.
Hope this helps and can you let the support community know your results by posting on this thread when you're done? Thank you.
Hope this helps. -
Can you help me solve my Leopard Server VPN madness?
Hello all,
I've been having a devil of a time getting Leopard Server's VPN service to work "properly". None of this is mission critical, as it's simply on a home system I'm using as a nat/dns/dhcp/firewall/mail/web server for my Comcast line (with a static IP). But, it is frustrating, because I currently have a 10.4.11 Server fulfilling the same roll. So it seems like Leopard should be able to be made to work. I'm gonna go step by step here with my install process in the hopes that if I'm doing something wrong someone will be kind enough to catch it. Thanks for bearing with me.
I've installed Leopard Server 10.5 (Mirror door G4, FYI) with the built-in ethernet connected to my Comcast router (with a static external IP). Immediately after 10.5 installs I restart and update everything to 10.5.2, then I install a Sonnet Gigabit NIC, it's drivers, and assign it 192.168.3.1, where it will live as my internal router, server, etc. I turn on DNS and setup an internal ".lan" zone that resolves to 192.168.3.1. Pop into Terminal and confirm that rDNS is in fact working, it is. And check that "changeip -checkhostname" resolves itself correctly (to the external IP).
Next, turn on the NAT service and run the gateway setup assistant. After a reboot I quickly check that my internal clients with static IPs (192.168.3.10, .20, etc) are working and pulling DNS OK, they are. Jump into the Firewall, and for the moment just open it wide up by accepting all connections. At various times during testing I've configured the firewall to exactly match my 10.4 Server firewall, but for the time being I can just leave it open. I create a Firewall group to cover my 192.168.3.x internal network, and another to handle 192.168.3.60/29 to handle the VPN service I'll setup in a sec. Jump over to the DHCP service where by default gateway setup creates a 192.168.1.x DHCP zone. I delete that and create a new 192.168.3.x zone covering .50-.59. Turn DHCP on and confirm it's working, good, it is.
Now, here is where the VPN fun begins. The last service I turn on is the VPN service (I've alternatively tried letting Gateway Setup activate it, and just doing it myself, with this same result). I configure it to accept L2TP at 192.168.3.60 - .63. Like I said this is a home server, so I don't need a lot of VPN connections. Finally, when I test the VPN from a 10.5.2 Client (MacBook coming in off a neighbors open wireless network with a 10.0.0.x string) I am able to connect, and I can see/ping/mount/share screen on the server. I can also ping the attached VPN client at 192.168.3.60 from the server. However, I cannot ping or see (In ARD) any other machines on the internal network from the attached VPN client. Likewise from one of the internal systems, say my Mac mini at 192.168.3.10 I cannot ping the attached VPN client at 192.168.3.60. Out of curiosity I've tried doing a rDNS lookup while attached to the VPN and the client isn't able to resolve any of the internal DNS entries.
So, what gives? As I've mentioned I have exactly this same setup working just fine with Tiger Server. Same NAT, same Firewall, same DNS, and same L2TP VPN setup. For the life of me though, I cannot get attached VPN clients to see the internal network when I put Leopard Server in place. Clearly the internal DNS isn't working for attached VPN clients, although I'm not certain if that is a cause or a symptom. I've setup a network routing definition for the internal private network, which didn't help. I also tried setting up PPTP instead of L2TP, and had the same problem.
Is anyone having similar problems with Leopard Server's VPN service? If not, could someone hit me with the clue stick and set me right? As I said, in the grand scheme of things this isn't a big deal for me. But, it's just frustrating that I can get so close to updating my home server and just fall short.
Thanks!Your post actually contains the Key to solve the problem and there is not really a big need for going all the way to use the Property List Editor to fork around /etc/ipfilter/ipaddressgroups.plist.
There has been much written on this problem but basically you see that most is trial and error and this does include myself and my findings in this post, too, but I think I can further narrow down on what CAUSES this problem and how to fix it.
First off, we are talking a combination of using NAT (Network Address Translation - bridging an Internet connection on an external network card over to an internal network card), Firewall (which is needed in OS X to be have NAT working because the Firewall "helps" NAT by doing its job, DHCP (for providing dynamic IP addresses to clients on the internal network, don't confuse, DHCP is not providing this service to the VPN clients, that is done by the VPN server), and - last but not least - VPN to provide access to not only to the server but to any machine on the internal network over the outside network card (aka, giving remote clients a chance to connect to the local network over the public Internet in a save and nice way).
OK. The short story: you can do it ALL in Mac OS X 10.5's Server Admin tool. If it fails it is nearly always the Firewall!
You can check if this is the case for your setup by temporarily opening the Firewall up to not block any traffic: in Server Admin, click on Firewall -> Settings -> Services -> Edit Service for: any and click "Allow all trafic from "any"", save it (and to be 100% sure, stop and restart the firewall. If your clients can NOW connect at least to the server, it was the firewall. Now don't forget to switch off allowing all traffic from any, or you will be left with an open doors server ready for anybody to explore
Now what goes wrong in the first place? It appears that the GSA (Gateway Setup Assistant) that is "hidden away" in the NAT settings does something awfully wrong. It will set up all the address groups in the firewall: the any group will remain as it is usually, another one defining the internal network, and a one called VPN-net for VPN.
What it DOES do wrong here (I am no firewall expert, this is purely trial and error, so please anybody do explain!) is to give the VPN-net exactly the same address range as the internal network. And here seems to be the overall problem.
When Twintails wrote to add 192.168.3.60/27 as address range for VPN, I realized what he/she did. Writing 192.168.3.60/27 effectively narrows down the address range starting at 192.168.3.33 up to 192.168.3.62. There are millions of subnetmask calculators out on the net, give it a try e.g. here: http://www.subnet-calculator.com/
So, I looked for what range of address will actually be given out by the VPN server to VPN clients upon connections. Of course you need to make sure that this address range is NOT given out by your DHCP server.
In my setup, the server is 192.168.1.1, the DHCP server provides addresses from 192.168.1.10 up to 192.168.1.127 (I start with 10 because I have some static addresses for special purposes from 192.168.1.2 to 192.168.1.9. So, this means, anything above 192.168.1.127 is potentially "free" for my VPN connections.
Next I used the subnetmask calculator to find a narrow address group that matched my purposes. I found 192.168.1.192/26 which effectively gives me a range from 192.168.1.192 to 192.168.1.255 (which is in fact more then I have clients connecting from externally!).
I went to the Server Admin Tool, and clicked Firewall -> Settings -> Address Group and edited the VPN-net one. First I deleted what was in "Addresses in group" and entered from scratch 192.168.1.192/26. Next - just to make certain because basically this is what Twintails had in his/her post by saying to add a name String with exactly the same information - I overwrote VPN-net by 192.168.1.192/26 and saved. (I THINK that this last step might not really be needed, but I haven't tried).
Next click Save (basically it should already work, but I always want to be extra sure, so I stoped and immediately thereafter started the firewall again to be 100% certain all new rules are now active.
And now: it works! Clients can access the server AND the entire local network from remote using VPN.
One last comment: I have the feeling that (although less safe and less advanced technologicall) PPTP works much better for us then L2TP. So I have switched off L2TP support altogether because it simply NEVER really worked. We are using Mac OS X 10.4 and 10.5 to connect to the 10.5 server using this setup. -
i tried to erase my ipod shuffle. i clicked 'restore' and was asked questions that i have no answers for. i don't recall getting a 'disk' when i bought this. can you please help?
➡ https://iforgot.apple.com/
-
I try to install my new La cie tripple rugged. So I thought: maybe for Mac and windows.(just if in future need to share something) The 1 TB was partitioned in 860 Gb hfs+ Guid, journaled + windows Fat 32 the other part. but what happens next is terrible.
After that, i though this is weird, nothing is happenning and by nothing I meant I couldnt see the 2 partitions. ...
WELL.
tO MAKE IT SIMPLER... i erase it send evrything first to check the disk if it was properly funtioning, veryfied the disk. everything was ok.
until I noticed that in my finder, In my Home has sevral folder, one of them is Applications that before I think it used to have a lot of things ...
NOW EVERYTHING´S GONE. GONE LIKE THE WIND.
I WAS TIRED, HEADACHE, HAD TO READ FOR HOURS AND ERASE FINALLY MY TRASH.
NOW IM HOPELESS..
Where and how can I reinstall and find those files? since there were from the applications.
I have all my applications under my hard drive root. but not in Home I cant find my templates, or parts of the programs like ADOBE.
Another thing: All my mail has stopped. I use Mail in my machine, now i cant receive any mail since it keeps telling me that the server smtp. has rejected my password. I preetty sure of what i write. i have them written in a secure place.
I NEED TO RECOVER THOSE FILES. IS THERE A WAY?
PLEASE, I REALLY NEED HELP HERE..
THANKS.Restore your backup.
-
i got charged twice for a movie (Safe House). Can i get a refund for that? we were not able to finish the movie last night, and now we're trying to watch it again. We have an hour left, however the apple tv is still loading the movie again for 2 hrs & 46 mins.
Welcome to the Apple Community.
Apple's policy on sales of digital content is that all sales are final. If however you wish to appeal to Apple, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History. -
Hi all,
It's a 15" 2.4 Ghz Intel Core 2 Duo MBP running on Leopard 10.5.8, bought spring 2008.
About a couple of weeks ago, my screen started randomly switching to a strange blue / purple tint along with a bad resolution (can't really read text on screen) and flashing horizontal lines in the background. It started worrying me given I'm working with it all the time and am hoping for this machine to hold on for a few more months until I can buy a new one.
It would happen randomly for a few minutes at a time and then revert back to normal screen.
I found a lot of references to a similar problem in a few threads such as this one:
https://discussions.apple.com/thread/1456983?tstart=0
My screen has gone strange again now and isn't reverting back to normal so far even after I tried restarting it. It was normal for 2 min only ans then back to bluish. I tried all the display fixes indicated in the threads but none of them work and I'm not exactly sure my issue is the same given I can still see the tint and horizontal lines in particular if the screen saver goes on, and the resolution on screenshots I've seen of other people having blue tint screen issues seems to be normal (as in text is legible).
Any ideas on how to fix it? Do you think it might be more of a software or hardware problem..? Would it help if I try upgrading my Mac OS?
Thank you very much for your timeThanks a lot for the reply, I was worried would say that outright. Screen just only reverted back to normal after a couple of hours. As you said probably best to bring it in for diagnosis, I'll try to do that asap though of course I'm nowhere neaar any AASP at the moment.
-
I am looking to develop a dynamic report template for our internal reporting use. Namely, I am looking for the ability to do two things:
1) Update the names of the tabs at the bottom of the report template (lets call them the "pages" of the report) from data stored within the file (for instance, label a tab with the "description" property from a given group or channel)
2) Add additional tabs with associated graphs based on the number of groups a particular file has (for instance, a particular component could have a test life of 2000 hrs, but have been put through several different tests along the way. It would be nice to show an overall life summary on the first tab, and then break out the data from the individual tests on seperate tabs with labels specific to that test, such as test #, etc.)
Any ideas on how this may (or may not) be done?Hi SethRow187,
Let's take this one step at a time, starting with the one REPORT sheet per Data Portal Group request. This is something that I do all the time, and I have developed lots of standard functions that I can re-use quickly and easily. DIAdem has the basic functions which enable this, but it takes quite a few commands to get this to work the way you and I want with absolute control.
In the "Group Sheets General" example I'm attaching below, the same REPORT layout TDR file is loaded once for each Data Portal Group, and then subsequently altered programmatically so that all the Group references in the REPORT objects (graphs, tables, text boxes) are replaced with references to the current Group. This results in N REPORT sheets where each sheet has explicit references to a particular Group.
In the "Group Sheets Simple" example I'm attaching below, again the same REPORT layout TDR file is loaded once for each Data Portal Group, but in this case no further change is made to each REPORT sheet after it is loaded. This results in N REPORT sheets which are absolutely identical in content to each other and which all reference the default Group. They appear different when refreshed because in each sheet, under its "Settings>>Layout Setup>>Worksheet Parameters" dialog there is a command configured to run each time the sheet is refreshed-- this command uses the current REPORT sheet index to set the corresponding Group to be the default Group.
In both cases the name of the Group is used for the REPORT sheet, which is convenient in that both Group names and REPORT sheet names are required to be unique, but you could use the Group description or any other property instead as long as you ensure that it has not already been used to name a previous REPORT sheet.
I also have scripts to concatenate the contents of N Groups into a new Group, located at the top of the Data Portal, and this combined with the below attached applications would give you the lead off overview REPORT sheet you mentioned.
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
Group Sheets Examples.zip 58 KB -
How do you close the apps after using them on the ipad?
Close inactive apps
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen -
Since I've switched to my new Mac, I can't download any of the (music) purchases I make. (I used a cable between the two Macs to make the original transfer of "all my stuff" from the old Mac to the new, so the iTunes stuff I had then is on the new Mac.)
I can see the download buttons, but when I push them, it stops it immediately and tells me I don't have the authority to do it.
I'm the sole person on the iTunes account. It doesn't matter whether I make the purchase on the new or the old computer. I even tried deauthorizing the old computer, so that the only one on the account is the new one, and it still won't let me download what I purchase. I did find something where I originally only had Read privileges, but I added Write as well, so that should be OK. Not sure what else to try.OK, I'm replying to my own question, because I've figured it out... sort of.
It seems that when I transferred computers, it set up my e-mail/Apple ID as a separate user! Why it did this, I have no idea.
I went into the User folder and found that I was barred from accessing any of the stuff under that ID. It was not enough to simply give myself Read & Write permission; I also had to use the little pulldown under the gear symbol that applied it to all the items IN the folder.
No idea why It would do this, but now it seems to have downloaded my stuff—at least some of it. (I know that one album is missing a song—?!) I'll have to check more completley later to make sure that it's ALL there.
Maybe you are looking for
-
CPU time & buffer busy waits events are causing performance degradation.
Oracle Version : - 11.2.0.2.0 Standard Edition OS Platform :- Linux x86 64-bit Edited by: 861928 on Aug 17, 2011 5:52 PM
-
I just loaded the newest version of iTunes on a pc with WindowsXP. As soon as I attempted to open iTunes, I received a message that it could not open due to missing files. This is the second upgrade in a row that this has happened to me. What is g
-
OSB+how to change content type header in http transport header.
I have a requirement where I need to change the value of: <http:Content-Type>text/xml; charset=utf-8</http:Content-Type> to the end system specific like: <http:Content-Type>application/abcd-cvs-v1+xml; </http:Content-Type> and the http:accept value t
-
HDMI monitor, detected as television, causing problems
I have an Acer H233H monitor that is connected to a 2010 mini via HDMI. In display preferences it is detected as a television. This is causing problems with some games. The games will only let me choose 50hz refresh rates, when the desktop is running
-
Open project in Encore CS3 takes much to long
After upgrading from Encore 2.0 to CS3 opening a HD-project takes about 10 minutes! How can that be? I don't work with huge projects but normal projects with about 10 mpeg files and 3 menus. My system: CPU Intel Core Duo 6600 2 GB RAM 2x 500 GB HD dr