Can you programatically get at an xcontrol label from within the xcontrol?

I'm working on an XControl, and I have include a VI in the control project definition to do some of the crunching. In this VI I would like to use the Label Text assigned to this instance of the XControl. The goal is to have my XControl write some info out to file on UnInit and so if the programmer used two or more instances, I would need to tag the info with the control's lable to be able to identify which control it came from. Is it simple and I have missed it?

Perhaps I misunderstand your question but I think this is possible.
Inside the XControl's Facade.vi, you can get a reference (Refnum) to the XControl from the Container State. You can use this reference to get the label of the XControl (Label.text property). If you put it in the right event in the facade vi (I tried the timeout case, but any of the events should work), you can store it in Display State, so you don't need to get it each time.
If you need the XControls label in a vi that uses it, you can do so just as you would with any other control. Simply right click the terminal, and select create reference, and wire a Label.text property to it.
Regards,
Wiebe.

Similar Messages

  • Can I add or edit Keywords and captions from within the Map module?

    I frequently find a need to edit or add to the caption while reviewing  and geotagging photos in the Map module.  Constantly toggling between modules is inconvenient.  Is there a way to add/edit captions or keywords while working in the Map module  (or view the map module while working in the Library?
    Thanks!
    Steve

    thank you
          From: Modesto Vega <[email protected]>
    To: Steve Murray <[email protected]>
    Sent: Thursday, January 29, 2015 3:27 PM
    Subject:  Can I add or edit Keywords and captions from within the Map module?
    Can I add or edit Keywords and captions from within the Map module?
    created by Modesto Vega in Photoshop Lightroom - View the full discussionYou should be able to change the title, the caption, the sublocation, the city, the state/province, the country, the ISO country code, the altitude, the direction, and a few other fields. However, you cannot add keywords. It would be real nice if Adobe could add this to the Map module. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7145077#7145077 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7145077#7145077 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • If you buy functionality IAP, can you gift this (fully or partially) to others within the app ?

    hello
    I am working on an app where different users need to buy in app content.
    my question is, would it be allowed by apple that if 1 user buys lets say 100 credits worth of content that he can gift/share his 100credits to/with other existing users?
    so can all users of the app use/share the total amount of content bought via in app purchased within the app ?
    in other words, is it possible for me to buy credits which i can use in my app, to unlock functionality and then give this functionality (total or partially) to another user that has or has not purchased also ?
    thanks in advance

    I haven't had any problems with the new iMac playing videos. So far, so good.
    As for having the OS preinstalled and no discs in the box, I recently made a recovery disk, just in case I need to reinstall the OS, since there isn't an install app anywhere on the hard drive (at least that I can find). Now, in 27 years of owning Macs, I've never had to reinstall an OS (don't ask about my Windows machines, though!). But there could always be a first time, right? Best to be prepared, just in caes...
    Also, I bought my iMac at Small Dog Electronics. I'm very happy with the price I got there, but *they* are the ones who told me I could also install the OS on my MacBook Pro--at no extra cost. When I called Apple I found out differently. So I've let Small Dog know that isn't correct and that they shouldn't be telling people that. I think the reason this happened is because my local store just opened in the past few months, and the employees there aren't as saavy and well-trained as Apple Store employees. This was my first experience not buying directly from Apple, but all in all it's been a good one.
    Larry, I got the trackpad, too. After some initial hiccups getting used to it, I absolutely love it.

  • Can't access wireless channels 12 and 13 from within the UK

    Hi,
    I have a Macbook Pro 15" (latest model core i7) that I bought online. It's a US model.
    When I am at work I am able to connect to the wireless network on channel 13. The wireless access point we have here is a Netgear and it has a "region" setting which is set to Europe.
    When I'm at home I can't access my own wireless router (a belkin device) on channels 12 or 13. When configured to 12 or 13 the network doesn't show up in the list.
    When I am connected to channel 13 at work, system profiler shows my Airport as being set to FCC locale and country code DE (germany). At home it always shows the country code as US.
    Is there a way to fix this? It seems as if the router at work is somehow broadcasting the region to the macbook over the wireless network (perhaps along with the SSID?) which its then somehow validating in order to enable channels 12/13.
    If anyone can tell me how to fix this or how to flash the airport to stay on the UK country code I'd be very grateful.
    Thanks.

    dmesg | grep -i cfg80211
    cfg80211: Calling CRDA to update world regulatory domain
    cfg80211: World regulatory domain updated:
    cfg80211: Calling CRDA for country: DE
    cfg80211: Regulatory domain changed to country: DE
    However, iwlist f still shows:
    wlan0 19 channels in total; available frequencies :
    Channel 01 : 2.412 GHz
    Channel 02 : 2.417 GHz
    Channel 03 : 2.422 GHz
    Channel 04 : 2.427 GHz
    Channel 05 : 2.432 GHz
    Channel 06 : 2.437 GHz
    Channel 07 : 2.442 GHz
    Channel 08 : 2.447 GHz
    Channel 09 : 2.452 GHz
    Channel 10 : 2.457 GHz
    Channel 11 : 2.462 GHz
    Channel 36 : 5.18 GHz
    Channel 40 : 5.2 GHz
    Channel 44 : 5.22 GHz
    Channel 48 : 5.24 GHz
    Channel 52 : 5.26 GHz
    Channel 56 : 5.28 GHz
    Channel 60 : 5.3 GHz
    Channel 64 : 5.32 GHz
    Current Frequency:2.457 GHz (Channel 10)

  • Can you programatically detect that a form has been called by another form?

    Can you programatically detect that a form has been called by another form using Open_Form?
    When closing a form I want to do one thing if it was opened stand-alone and another thing if it was called using Open_Form by another form.
    Thanks in advance.

    Maybe, Tony, also
    GET_APPLICATION_PROPERTY built-in ; it can
    be used to retrieve information about the calling (parent) and called
    form (child).
    The following example describes a way to perform a query on the child form
    using a value from the parent form; if the form is a child form, it first
    executes a query, otherwise the form goes into insert mode automatically.
              WHEN-NEW-FORM-INSTANCE
              ======================
              BEGIN
                   :GLOBAL.APP_NAME := GET_APPLICATION_PROPERTY(CALLING_FORM);
                   IF :GLOBAL.APP_NAME IS NOT NULL THEN
                        EXECUTE_QUERY;
                   END IF;
              END;Regards

  • After unblocking a caller can you sometimes get some of the text messages they sent you while blocked

    After unblocking a caller can you sometimes get some of the text messages they sent you while blocked???

    no they are blocked.  Read this http://support.apple.com/kb/ht5845

  • Can you manually get iCloud to push wifi passwords to iPhone 5?

    My iPhone 5 keeps on dropping 3g when I am out and about. Resetting my network settings seems to solve this but also means that I have lost all my wifi passwords. Is there a way to get iCloud to push those passwords out to my phone again as surely they must all be stored somewhere?Can you manually get iCloud to send

    As far as I know they are stored in keychain, make sure you enable it. I still suspect that if you only have iphone and no other devices - it will not work the way you expect and definitely no to manual push. One suggestion that can help you (hopefully). While reset network settings is very effective there is another way that gets overlooked - turning on airplane mode for half a minute. It suppose to turn off all radios on the phone efficiently doing the same (connecting to best available cell on the tower after restart).

  • Can you still get 22" Cinema Display back light fixed?

    Can you still get 22" Cinema Display back light fixed?

    Did you think of googling for "apple 23" cinema display power adapter" and see what turns up?

  • Can you still get attachable keyboard for iPhone and if so is it compatible with the iphone 5c

    Can you still get an attachable keyboard for iPhone and if so is it compatible with the iphone 5c?

    havent seen any wired keyboards for ios apart from the ipad ones
    but all bluetooth keyboards works be they apple mac keyboards or normal windows keyboards or small keyboards
    if they support bluetooth they work

  • I have an older Ipod Touch, I bought a new one and the Itunes on my computer is too old to recognize my new Ipod Touch and cannot be updated.  Is there a creditable software program I can use to get all my old music from my old iPod Touch to the new one?

    I have an older iPod Touch, I bought a new one and the Itunes on my computer is too old to recognize my new iPod Touch and Itunes cannot be updated.  Is there a creditable software program I can use to get all my old music from my old iPod Touch to the new one?  It is my understanding that the music cannot be saved onto my new iTunes, b/c I did not have iCloud. I have over 2,000 songs I just cannot part with. PLEASE PLEASE PLEASE help some how!!  THANKS!

    I had the same problem with my iPad, i couldn't get the newer version of itunes because the computer was too old and my iPad couldnt sync with the old itunes. I got a PC from school a few months later so that solved the problem for me. Unfortunately i don't think there would be a program to put your music on your iPod, iTunes should be the only way to transfer files to Apple devices. What operating system are you running and what version of it is it?

  • HT201335 why can't i get sound when I mirror from the latest mac mini?

    why can't i get sound when I mirror from the latest mac mini?

    if you have sound icon on your menu bar: press alt on your keyboard and click mouse on sound icon - check is the correct audio output is selected.
    If you do not have this icon: System preferences > Sound > Output and check audio output

  • Why can't I get any sound to come from my phone unless I put it on speaker phone?

    Why can't I get any sound to come from my phone unless I put it on speaker?

    Do you still have the original plastic shipping cover on the face of the iPhone?  Or any kind of screen protector that covers the speaker ear hole.  That will block the sound.
    My wife experienced this.
    Also if you still have the shipping plastic on the back, it will cause the camera flash to spill back into the camera lense spoiling your pictures.

  • How can we get a url for a "Meet Now" conference call from within the Windows Store App?

    Hi,
    Is it possible to get the url for the current meeting / new "Meet Now" call from within the Windows Store app?
    You have the option of inviting your current Lync contacts, but I don't see a way of giving a URL to clients that would launch Lync on their device, or take them to the web app.
    I can see how to get the link using the Outlook plugin, for pre-scheduled meetings. Is this link always the same and the one that should be used for an impromptu "Meet Now" meeting? It would still be good to know how to get this URL from within
    the store app so I can tell clients where to get it.
    Some people may be on Windows RT devices and not have access to the plugin in Outlook, and want to start a meeting at short notice and then invite others via email or pasting a link to them elsewhere.
    Any help appreciated.
    If I have answered your question, please mark it as the correct answer. If I have provided helpful information, please mark it as so.

    Hi,
    Agree with Holger, I check on my Lync Windows Store app and can't find the meeting URL as well.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • My sister has a mac and i want to update my phone onto the computer but i dont want her to see all my stuff can you somehow have more than one itunes account on the same computer so my stuff with save?

    my sister has a mac and i want to update my phone onto the computer but i dont want her to see all my stuff can you somehow have more than one itunes account on the same macbook so my stuff with save?

    How to use multiple iPhone, iPad, or iPod devices with one computer. The only way is for you to have a separate user account to log into on that computer.

  • Can you hook up multiple pairs of wireless headphones to the MDR-DS6500 base unit

    Can you hook up multiple pairs of wireless headphnes to the MDR-DS6500 base unit or do you need a base unit for every pair you would like to connect to your tv? if you can which models are compatible?
    Thanks

    Do I need an AirPort to attach to each set of speakers that I want to connect, or is there another kind of receiver I can hook up to the speakers that do not have any kind of WiFi or Bluetooth configuration?
    You basically have two choices: 1) Place an AirPort Express base station at each of the speaker locations, or 2) Use an AirPlay-Ready receiver that offers whole-home audio support. The latter would require that all speakers be connected back to the receiver.
    Also, if I am planning to set up the airplay by using the extended network configuration, then the Wifi base station does not need to be an AirPort station? I have Fios and had trouble last time I tried to hook up an AirPort in place of the router that they provided.
    The AirPlay networking protocol requires either a wireless or wired connection between the AirPlay server (typically iTunes) and the AirPlay speaker (AirPort Express, Apple TV, or an AirPlay-Ready receiver or speaker). AirPlay will traverse over an extended Wi-Fi network regardless of which manufacturer hardware is used.

Maybe you are looking for

  • Jabber for Windows 9.0.2

    Hi There, Jabber for Windows 9.0.2 seems to have been published on CCO but the documentation is rather light. Was this published by accident? Giles

  • GR/IR clearing issue due to change in configuration.

    Hello,              We have a production issue. User has entered Purchase Order and entered Goods Receipt. Later it was realized that it was posting to an incorrect GR/IR clearing account. So as per the valuation class, correction has been made to th

  • Error in clicking  preview button in RFQ's

    Hi All, Encountered error in clicking preview button in RFQ's.       Request Failed!      APP-FND-00296: Cannot submit concurrent request for program SEZCPORFQ Check if the concurrent program is registered with Application Object Library. Check if yo

  • How to get Task Id in Visual Studio 2012 Workflow?

    Hi, How can I get Task Id when create Single Task before user Accept/Reject the Task? Can anyone help me to this , bit urgent next week going to production? Thank you. S.Shangar

  • Paste screenshot in outlook web access - OWA

    Exchange server 2007 IE 8 Hello, Is it possible to paste/embed a screenshot into a new email through OWA ? Maybe in exchange server 2010 ? regards, wim.